The password-reset form in ServiceNow Orlando provides different responses to invalid authentication attempts depending on whether the username exists.

Piccolo is an ORM and query builder which supports asyncio. In versions 0.120.0 and prior, the implementation of `BaseUser.login` leaks enough information to a malicious user such that they would be able to successfully generate a list of valid users on the platform. As Piccolo on its own does not also enforce strong passwords, these lists of valid accounts are likely to be used in a password spray attack with the outcome being attempted takeover of user accounts on the platform. The impact of this vulnerability is minor as it requires chaining with other attack vectors in order to gain more then simply a list of valid users on the underlying platform. The likelihood of this vulnerability is possible as it requires minimal skills to pull off, especially given the underlying login functionality for Piccolo based sites is open source. This issue has been patched in version 0.121.0.

An email address enumeration vulnerability exists in the password reset function of Rocket.Chat through 3.9.1.

Observable discrepancies in the login process allow an attacker to guess legitimate user names registered in the BMC. This issue affects: Lanner Inc IAC-AST2500A standard firmware version 1.10.0.

Dalmark Systems Systeam 2.22.8 build 1724 is vulnerable to User enumeration. The Systeam application is an ERP system that uses a mixed architecture based on SaaS tenant and user management, and on-premise database and web application counterparts. This issue occurs during the identification of the correct tenant for a given user, where a difference in messages could allow an attacker to determine if the given user is valid or not, enabling a brute force attack with valid users.

In Cibele Thinfinity VirtualUI before 3.0, /changePassword returns different responses for invalid authentication requests depending on whether the username exists.

In Legion of the Bouncy Castle BC before 1.61 and BC-FJA before 1.0.1.2, attackers can obtain sensitive information about a private exponent because of Observable Differences in Behavior to Error Inputs. This occurs in org.bouncycastle.crypto.encodings.OAEPEncoding. Sending invalid ciphertext that decrypts to a short payload in the OAEP Decoder could result in the throwing of an early exception, potentially leaking some information about the private exponent of the RSA private key performing the encryption.

A vulnerability in Cisco Integrated Management Controller could allow an unauthenticated, remote attacker to enumerate valid usernames within the vulnerable application. The vulnerability is due to differences in authentication responses sent back from the application as part of an authentication attempt. An attacker could exploit this vulnerability by sending authentication requests to the affected application. A successful exploit could allow the attacker to confirm the names of administrative user accounts for use in further attacks.There are no workarounds that address this vulnerability.

A vulnerability in the TLS handler of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to gain access to sensitive information. This vulnerability is due to improper implementation of countermeasures against a Bleichenbacher attack on a device that uses SSL decryption policies. An attacker could exploit this vulnerability by sending crafted TLS messages to an affected device, which would act as an oracle and allow the attacker to carry out a chosen-ciphertext attack. A successful exploit could allow the attacker to perform cryptanalytic operations that may allow decryption of previously captured TLS sessions to the affected device.

Umanni RH 1.0 has a user enumeration vulnerability. This issue occurs during password recovery, where a difference in messages could allow an attacker to determine if the user is valid or not, enabling a brute force attack with valid users.

A vulnerability in Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), and Cisco Unity Connection could allow an unauthenticated, remote attacker to perform a timing attack. This vulnerability is due to insufficient protection of a system password. An attacker could exploit this vulnerability by observing the time it takes the system to respond to various queries. A successful exploit could allow the attacker to determine a sensitive system password.

Dalmark Systems Systeam 2.22.8 build 1724 is vulnerable to User enumeration. The Systeam application is an ERP system that uses a mixed architecture based on SaaS tenant and user management, and on-premise database and web application counterparts. This issue occurs during the password recovery procedure for a given user, where a difference in messages could allow an attacker to determine if the given user is valid or not, enabling a brute force attack with valid users.

User enumeration vulnerability in Arconte Áurea 1.5.0.0 version. The exploitation of this vulnerability could allow an attacker to obtain a list of registered users in the application, obtaining the necessary information to perform more complex attacks on the platform.

A user enumeration vulnerability in MELAG FTP Server 2.2.0.4 allows an attacker to identify valid FTP usernames.

ECDSA/EC/Point.pm in Crypt::Perl before 0.33 does not properly consider timing attacks against the EC point multiplication algorithm.

A vulnerability has been identified in RUGGEDCOM i800, RUGGEDCOM i801, RUGGEDCOM i802, RUGGEDCOM i803, RUGGEDCOM M2100, RUGGEDCOM M2100F, RUGGEDCOM M2200, RUGGEDCOM M2200F, RUGGEDCOM M969, RUGGEDCOM M969F, RUGGEDCOM RMC30, RUGGEDCOM RMC8388 V4.X, RUGGEDCOM RMC8388 V5.X, RUGGEDCOM RP110, RUGGEDCOM RS1600, RUGGEDCOM RS1600F, RUGGEDCOM RS1600T, RUGGEDCOM RS400, RUGGEDCOM RS400F, RUGGEDCOM RS401, RUGGEDCOM RS416, RUGGEDCOM RS416F, RUGGEDCOM RS416P, RUGGEDCOM RS416PF, RUGGEDCOM RS416Pv2 V4.X, RUGGEDCOM RS416Pv2 V5.X, RUGGEDCOM RS416v2 V4.X, RUGGEDCOM RS416v2 V5.X, RUGGEDCOM RS8000, RUGGEDCOM RS8000A, RUGGEDCOM RS8000H, RUGGEDCOM RS8000T, RUGGEDCOM RS900, RUGGEDCOM RS900 (32M) V4.X, RUGGEDCOM RS900 (32M) V5.X, RUGGEDCOM RS900F, RUGGEDCOM RS900G, RUGGEDCOM RS900G (32M) V4.X, RUGGEDCOM RS900G (32M) V5.X, RUGGEDCOM RS900GF, RUGGEDCOM RS900GP, RUGGEDCOM RS900GPF, RUGGEDCOM RS900L, RUGGEDCOM RS900M-GETS-C01, RUGGEDCOM RS900M-GETS-XX, RUGGEDCOM RS900M-STND-C01, RUGGEDCOM RS900M-STND-XX, RUGGEDCOM RS900W, RUGGEDCOM RS910, RUGGEDCOM RS910L, RUGGEDCOM RS910W, RUGGEDCOM RS920L, RUGGEDCOM RS920W, RUGGEDCOM RS930L, RUGGEDCOM RS930W, RUGGEDCOM RS940G, RUGGEDCOM RS940GF, RUGGEDCOM RS969, RUGGEDCOM RSG2100, RUGGEDCOM RSG2100 (32M) V4.X, RUGGEDCOM RSG2100 (32M) V5.X, RUGGEDCOM RSG2100F, RUGGEDCOM RSG2100P, RUGGEDCOM RSG2100P (32M) V4.X, RUGGEDCOM RSG2100P (32M) V5.X, RUGGEDCOM RSG2100PF, RUGGEDCOM RSG2200, RUGGEDCOM RSG2200F, RUGGEDCOM RSG2288 V4.X, RUGGEDCOM RSG2288 V5.X, RUGGEDCOM RSG2300 V4.X, RUGGEDCOM RSG2300 V5.X, RUGGEDCOM RSG2300F, RUGGEDCOM RSG2300P V4.X, RUGGEDCOM RSG2300P V5.X, RUGGEDCOM RSG2300PF, RUGGEDCOM RSG2488 V4.X, RUGGEDCOM RSG2488 V5.X, RUGGEDCOM RSG2488F, RUGGEDCOM RSG907R, RUGGEDCOM RSG908C, RUGGEDCOM RSG909R, RUGGEDCOM RSG910C, RUGGEDCOM RSG920P V4.X, RUGGEDCOM RSG920P V5.X, RUGGEDCOM RSL910, RUGGEDCOM RST2228, RUGGEDCOM RST2228P, RUGGEDCOM RST916C, RUGGEDCOM RST916P. A timing attack, in a third-party component, could make the retrieval of the private key possible, used for encryption of sensitive data. If a threat actor were to exploit this, the data integrity and security could be compromised.

A user enumeration vulnerability flaw was found in Venki Supravizio BPM 10.1.2. This issue occurs during password recovery, where a difference in error messages could allow an attacker to determine if a username is valid or not, enabling a brute-force attack with valid usernames.

An issue was discovered in eZ Publish Ibexa Kernel before 7.5.15.1. The /user/sessions endpoint can be abused to determine account existence.

Kanboard is project management software that focuses on the Kanban methodology. Prior to version 1.2.46, Kanboard is vulnerable to username enumeration and IP spoofing-based brute-force protection bypass. By analyzing login behavior and abusing trusted HTTP headers, an attacker can determine valid usernames and circumvent rate-limiting or blocking mechanisms. Any organization running a publicly accessible Kanboard instance is affected, especially if relying on IP-based protections like Fail2Ban or CAPTCHA for login rate-limiting. Attackers with access to the login page can exploit this flaw to enumerate valid usernames and bypass IP-based blocking mechanisms, putting all user accounts at higher risk of brute-force or credential stuffing attacks. Version 1.2.46 contains a patch for the issue.

Citrix XenApp 6.5, when 2FA is enabled, allows a remote unauthenticated attacker to ascertain whether a user exists on the server, because the 2FA error page only occurs after a valid username is entered. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

An issue was discovered in Aviatrix Controller before 5.4.1204. There is a Observable Response Discrepancy from the API, which makes it easier to perform user enumeration via brute force.

Best Practical Request Tracker (RT) 4.2 before 4.2.17, 4.4 before 4.4.5, and 5.0 before 5.0.2 allows sensitive information disclosure via a timing attack against lib/RT/REST2/Middleware/Auth.pm.

A vulnerability in the RADIUS authentication module of Cisco Policy Suite could allow an unauthenticated, remote attacker to determine whether a subscriber username is valid. The vulnerability occurs because the Cisco Policy Suite RADIUS server component returns different authentication failure messages based on the validity of usernames. An attacker could use these messages to determine whether a valid subscriber username has been identified. The attacker could use this information in subsequent attacks against the system. Cisco Bug IDs: CSCvg47830.

Thinfinity VirtualUI before 3.0 allows a malicious actor to enumerate users registered in the OS (Windows) through the /changePassword URI. By accessing the vector, an attacker can determine if a username exists thanks to the message returned; it can be presented in different languages according to the configuration of VirtualUI. Common users are administrator, admin, guest and krgtbt.

CMAC verification functionality in Microchip Atmel ATSAMA5 products is vulnerable to vulnerable to timing and power analysis attacks.

Jetty through 9.4.x is prone to a timing channel in util/security/Password.java, which makes it easier for remote attackers to obtain access by observing elapsed times before rejection of incorrect passwords.

IBM Guardium Data Encryption (GDE) 5.0.0.2 behaves differently or sends different responses under different circumstances in a way that is observable to an unauthorized actor, which could facilitate username enumeration. IBM X-Force ID: 213856.

A vulnerability has been identified in Mendix Forgot Password (Mendix 10 compatible) (All versions < V5.4.0), Mendix Forgot Password (Mendix 7 compatible) (All versions < V3.7.3), Mendix Forgot Password (Mendix 8 compatible) (All versions < V4.1.3), Mendix Forgot Password (Mendix 9 compatible) (All versions < V5.4.0). Applications using the affected module are vulnerable to user enumeration due to distinguishable responses. This could allow an unauthenticated remote attacker to determine if a user is valid or not, enabling a brute force attack with valid users.

In BIG-IP 15.0.0, 14.1.0-14.1.0.6, 14.0.0-14.0.0.5, 13.0.0-13.1.1.5, 12.1.0-12.1.4.1, 11.5.1-11.6.4, BIG-IQ 7.0.0, 6.0.0-6.1.0,5.2.0-5.4.0, iWorkflow 2.3.0, and Enterprise Manager 3.1.1, the Configuration utility login page may not follow best security practices when handling a malicious request.

The commit 3730880 (April 2023) and v.0.9-beta1 of gugoan Economizzer has a user enumeration vulnerability in the login and forgot password functionalities. The app reacts differently when a user or email address is valid, and when it's not. This may allow an attacker to determine whether a user or email address is valid, or brute force valid usernames and email addresses.

Username enumeration is possible through Bypassing CAPTCHA in On-premise SureMDM Solution on Windows deployment allows attacker to enumerate local user information via error message. This issue affects SureMDM On-premise: 6.31 and below version

goauthentik is an open-source Identity Provider. In affected versions using a recovery flow with an identification stage an attacker is able to determine if a username exists. Only setups configured with a recovery flow are impacted by this. Anyone with a user account on a system with the recovery flow described above is susceptible to having their username/email revealed as existing. An attacker can easily enumerate and check users' existence using the recovery flow, as a clear message is shown when a user doesn't exist. Depending on configuration this can either be done by username, email, or both. This issue has been addressed in versions 2023.5.6 and 2023.6.2. Users are advised to upgrade. There are no known workarounds for this issue.

IBM Aspera Faspex 5.0.0 through 5.0.10 could disclose sensitive username information due to an observable response discrepancy.

The login functionality of the web server in affected devices does not normalize the response times of login attempts. An unauthenticated remote attacker could exploit this side-channel information to distinguish between valid and invalid usernames.

Pimcore is an open source data & experience management platform. In versions prior to 10.1.3, it is possible to enumerate usernames via the forgot password functionality. This issue is fixed in version 10.1.3. As a workaround, one may apply the available patch manually.

An issue was discovered in eGroupWare 17.1.20190111. A User Enumeration vulnerability exists under calendar/freebusy.php, which allows unauthenticated remote attackers to enumerate the users of web applications based on server response.

IBM CICS TX Advanced 10.1 could disclose sensitive information to a remote attacker due to observable discrepancy in HTTP responses. IBM X-Force ID: 260814.

An issue was discovered in the ProofreadPage (aka Proofread Page) extension for MediaWiki through 1.39.3. In includes/Page/PageContentHandler.php and includes/Page/PageDisplayHandler.php, hidden users can be exposed via public interfaces.

Tadiran Telecom Aeonix - CWE-204: Observable Response Discrepancy

HashiCorp's Vault and Vault Enterprise are vulnerable to user enumeration when using the LDAP auth method. An attacker may submit requests of existent and non-existent LDAP users and observe the response from Vault to check if the account is valid on the LDAP server. This vulnerability is fixed in Vault 1.14.1 and 1.13.5.

Observable Response Discrepancy in the SICK ICR890-4 could allow a remote attacker to identify valid usernames for the FTP server from the response given during a failed login attempt.

A vulnerability classified as problematic has been found in Rotem Dynamics Rotem CRM up to 20230729. This affects an unknown part of the file /LandingPages/api/otp/send?id=[ID][ampersand]method=sms of the component OTP URI Interface. The manipulation leads to information exposure through discrepancy. It is possible to initiate the attack remotely. The identifier VDB-233253 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

emoncms v11 and later was discovered to contain an information disclosure vulnerability which allows attackers to obtain the web directory path and other information leaked by the server via a crafted web request.

Meow hash 0.5/calico does not sufficiently thwart key recovery by an attacker who can query whether there's a collision in the bottom bits of the hashes of two messages, as demonstrated by an attack against a long-running web service that allows the attacker to infer collisions by measuring timing differences.

TN-5900 Series version 3.3 and prior versions is vulnearble to user enumeration vulnerability. The vulnerability may allow a remote attacker to determine whether a user is valid during password recovery through the web login page and enable a brute force attack with valid users.

AMI BMC contains a vulnerability in the IPMI handler, where an unauthorized attacker can use certain oracles to guess a valid username, which may lead to information disclosure.

User enumeration vulnerability in Password Recovery plugin 1.2 version for Roundcube, which could allow a remote attacker to create a test script against the password recovery function to enumerate all users in the database.

Avaya IX Workforce Engagement v15.2.7.1195 - User Enumeration - Observable Response Discrepancy

A username enumeration issue was discovered in Medicine Tracker System 1.0. The login functionality allows a malicious user to guess a valid username due to a different response time from invalid usernames. When one enters a valid username, the response time increases depending on the length of the supplied password.