A DLL hijacking vulnerability in AMD μProf could allow an attacker to achieve privilege escalation, potentially resulting in arbitrary code execution.

A DLL hijacking vulnerability in the AMD Manageability API could allow an attacker to achieve privilege escalation, potentially resulting in arbitrary code execution.

Race condition in ASP firmware could allow less privileged x86 code to perform ASP SMM (System Management Mode) operations.

An untrusted search path in AMD Radeon settings Installer may lead to a privilege escalation or unauthorized code execution.

The Trusted Platform Modules (TPM) reference software may not properly track the number of times a failed shutdown happens. This can leave the TPM in a state where confidential key material in the TPM may be able to be compromised. AMD believes that the attack requires physical access of the device because the power must be repeatedly turned on and off. This potential attack may be used to change confidential information, alter executables signed by key material in the TPM, or create a denial of service of the device.

A DLL hijacking vulnerability in Doc Nav could allow a local attacker to achieve privilege escalation, potentially resulting in arbitrary code execution.

Unsafe OpenSSL initialization within some AMD optional tools may allow a local user-privileged attacker to inject a malicious DLL, potentially resulting in arbitrary code execution.

A DLL hijacking vulnerability in Vivado could allow a local attacker to achieve privilege escalation, potentially resulting in arbitrary code execution.

A DLL hijacking vulnerability in AMD Integrated Management Technology (AIM-T) Manageability Service could allow an attacker to achieve privilege escalation potentially resulting in arbitrary code execution.

A DLL hijacking vulnerability in the AMD Software Installer could allow an attacker to achieve privilege escalation potentially resulting in arbitrary code execution.

A DLL hijacking vulnerability in the AMD Cleanup Utility could allow an attacker to achieve privilege escalation potentially resulting in arbitrary code execution.

Delta Electronics DIALink versions 1.2.4.0 and prior insecurely loads libraries, which may allow an attacker to use DLL hijacking and takeover the system where the software is installed.

AVEVA Software Platform Common Services (PCS) Portal versions 4.5.2, 4.5.1, 4.5.0, and 4.4.6 are vulnerable to DLL hijacking through an uncontrolled search path element, which may allow an attacker control to one or more locations in the search path.

A binary hijack in Orwell-Dev-Cpp v5.11 allows attackers to execute arbitrary code via a crafted .exe file.

An issue was discovered in Foxit Reader and PhantomPDF before 10.1.4. It allows DLL hijacking, aka CNVD-C-2021-68000 and CNVD-C-2021-68502.

The Nextcloud Desktop Client is a tool to synchronize files from Nextcloud Server with a computer. The Nextcloud Desktop Client invokes its uninstaller script when being installed to make sure there are no remnants of previous installations. In versions 3.0.3 through 3.2.4, the Client searches the `Uninstall.exe` file in a folder that can be written by regular users. This could lead to a case where a malicious user creates a malicious `Uninstall.exe`, which would be executed with administrative privileges on the Nextcloud Desktop Client installation. This issue is fixed in Nextcloud Desktop Client version 3.3.0. As a workaround, do not allow untrusted users to create content in the `C:\` system folder and verify that there is no malicious `C:\Uninstall.exe` file on the system.

Acronis Cyber Protect 15 for Windows prior to build 27009 and Acronis Agent for Windows prior to build 26226 allowed local privilege escalation via DLL hijacking.

Check Point Endpoint Security Client for Windows before version E84.20 allows write access to the directory from which the installation repair takes place. Since the MS Installer allows regular users to run the repair, an attacker can initiate the installation repair and place a specially crafted DLL in the repair folder which will run with the Endpoint client’s privileges.

Photoshop Desktop versions 25.12, 26.1 and earlier are affected by an Uncontrolled Search Path Element vulnerability that could lead to arbitrary code execution. An attacker could manipulate the search path environment variable to point to a malicious library, resulting in the execution of arbitrary code when the application loads. Exploitation of this issue requires user interaction in that a victim must run the vulnerable application.

Git for Windows is the Windows port of Git. Prior to version 2.40.1, any user of Git CMD who starts the command in an untrusted directory is impacted by an Uncontrolles Search Path Element vulnerability. Maliciously-placed `doskey.exe` would be executed silently upon running Git CMD. The problem has been patched in Git for Windows v2.40.1. As a workaround, avoid using Git CMD or, if using Git CMD, avoid starting it in an untrusted directory.

In EMC VNX2 versions prior to OE for File 8.1.9.211 and VNX1 versions prior to OE for File 7.1.80.8, a local authenticated user can load a maliciously crafted file in the search path which may potentially allow the attacker to execute arbitrary code on the targeted VNX Control Station system, aka an uncontrolled search path vulnerability.

Acrobat Reader DC versions 2021.005.20060 (and earlier), 2020.004.30006 (and earlier) and 2017.011.30199 (and earlier) are affected by an Uncontrolled Search Path Element vulnerability. A local attacker with non-administrative privileges can plant a malicious DLL to achieve arbitrary code execution in the context of the current user via DLL hijacking. Exploitation of this issue requires user interaction.

dandavison delta before 0.8.3 on Windows resolves an executable's pathname as a relative path from the current directory.

OpenVPN Connect 3.2.0 through 3.3.0 allows local users to load arbitrary dynamic loadable libraries via an OpenSSL configuration file if present, which allows the user to run arbitrary code with the same privilege level as the main OpenVPN process (OpenVPNConnect.exe).

Git for Windows, the Windows port of Git, ships with an executable called `connect.exe`, which implements a SOCKS5 proxy that can be used to connect e.g. to SSH servers via proxies when certain ports are blocked for outgoing connections. The location of `connect.exe`'s config file is hard-coded as `/etc/connectrc` which will typically be interpreted as `C:\etc\connectrc`. Since `C:\etc` can be created by any authenticated user, this makes `connect.exe` susceptible to malicious files being placed there by other users on the same multi-user machine. The problem has been patched in Git for Windows v2.40.1. As a workaround, create the folder `etc` on all drives where Git commands are run, and remove read/write access from those folders. Alternatively, watch out for malicious `<drive>:\etc\connectrc` files on multi-user machines.

A vulnerability was found in XAMPP 7.1.1-0-VC14. It has been classified as problematic. Affected is an unknown function of the component Installer. The manipulation leads to privilege escalation. It is possible to launch the attack remotely.

TeamViewer before 14.7.48644 on Windows loads untrusted DLLs in certain situations.

A vulnerability classified as problematic was found in Python 2.7.13. This vulnerability affects unknown code of the component pgAdmin4. The manipulation leads to uncontrolled search path. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Viscosity 1.6.7. It has been classified as critical. This affects an unknown part of the component DLL Handler. The manipulation leads to untrusted search path. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.6.8 is able to address this issue. It is recommended to upgrade the affected component.

A vulnerability was found in InnoSetup Installer. It has been declared as problematic. Affected by this vulnerability is an unknown functionality. The manipulation leads to uncontrolled search path. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

Genymotion Desktop v3.2.1 was discovered to contain a DLL hijacking vulnerability which allows attackers to escalate privileges and execute arbitrary code via a crafted binary.

An unsafe search path vulnerability in FortiClientWindows 7.0.0, 6.4.6 and below, 6.2.x, 6.0.x and FortiClientEMS 7.0.0, 6.4.6 and below, 6.2.x, 6.0.x may allow an attacker to perform a DLL Hijack attack on affected devices via a malicious OpenSSL engine library in the search path.

HP Support Assistant uses HP Performance Tune-up as a diagnostic tool. HP Support Assistant uses Fusion to launch HP Performance Tune-up. It is possible for an attacker to exploit the DLL hijacking vulnerability and elevate privileges when Fusion launches the HP Performance Tune-up.

Improper access control vulnerability in the repair process for McAfee Agent for Windows prior to 5.7.4 could allow a local attacker to perform a DLL preloading attack using unsigned DLLs. This would result in elevation of privileges and the ability to execute arbitrary code as the system user, through not correctly protecting a temporary directory used in the repair process and not checking the DLL signature.

An issue found in UwAmp v.1.1, 1.2, 1.3, 2.0, 2.1, 2.2, 2.2.1, 3.0.0, 3.0.1, 3.0.2 allows a remote attacker to execute arbitrary code via a crafted DLL.

Emerson DeltaV DCS versions 11.3.1, 12.3.1, 13.3.0, 13.3.1, R5 allow a specially crafted DLL file to be placed in the search path and loaded as an internal and valid DLL, which may allow arbitrary code execution.

Apache OpenOffice versions before 4.1.14 may be configured to add an empty entry to the Java class path. This may lead to run arbitrary Java code from the current directory.

Acronis True Image prior to 2021 Update 4 for Windows allowed local privilege escalation due to DLL hijacking.

A vulnerability in the preloading mechanism of specific dynamic link libraries in McAfee Agent for Windows prior to 5.7.3 could allow an authenticated, local attacker to perform a DLL preloading attack with unsigned DLLs. To exploit this vulnerability, the attacker would need to have valid credentials on the Windows system. This would result in the user gaining elevated permissions and being able to execute arbitrary code.

A maliciously crafted DLL file can be forced to install onto a non-default location, and attacker can overwrite parts of the product with malicious DLLs. These files may then have elevated privileges leading to a Privilege Escalation vulnerability.

When loading the shared library that provides the OTR protocol implementation, Thunderbird will initially attempt to open it using a filename that isn't distributed by Thunderbird. If a computer has already been infected with a malicious library of the alternative filename, and the malicious library has been copied to a directory that is contained in the search path for executable libraries, then Thunderbird will load the incorrect library. This vulnerability affects Thunderbird < 78.9.1.

Audacity 2.1.2 through 2.3.2 is vulnerable to Dll HIjacking in the avformat-55.dll resulting arbitrary code execution.

NSIS (Nullsoft Scriptable Install System) 3.06.1 before 3.12 sometimes uses the Low IL temp directory when executing as SYSTEM, allowing local attackers to gain privileges (if they can cause my_GetTempFileName to return 0, as shown in the references).

Adobe Creative Cloud Desktop Application (installer) version 2.4 (and earlier) is affected by an Uncontrolled Search Path Element vulnerability. An unauthenticated attacker could leverage this vulnerability to achieve arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

Uncontrolled search path element in some Intel(R) RealSense(TM) Dynamic Calibration software before version 2.13.1.0 may allow an authenticated user to potentially enable escalation of privilege via local access.

Trend Micro Password Manager version 5 (Consumer) is vulnerable to a DLL Hijacking vulnerability which could allow an attacker to inject a malicious DLL file during the installation progress and could execute a malicious program each time a user installs a program.

In Chris Walz bit before 1.0.5 on Windows, attackers can run arbitrary code via a .exe file in a crafted repository.

Adobe Creative Cloud Desktop 3.5 (and earlier) is affected by an uncontrolled search path vulnerability that could result in elevation of privileges. Exploitation of this issue requires user interaction in that a victim must log on to the attacker's local machine.

A vulnerability was found in Symantec Norton Download Manager versions prior to 5.6. A remote user can create a specially crafted DLL file that, when placed on the target user's system, will cause the Norton Download Manager component to load the remote user's DLL instead of the intended DLL and execute arbitrary code when the Norton Download Manager component is run by the target user.

A DLL hijacking vulnerability Trend Micro HouseCall for Home Networks version 5.3.1063 and below could allow an attacker to use a malicious DLL to escalate privileges and perform arbitrary code execution. An attacker must already have user privileges on the machine to exploit this vulnerability.