In wlan driver, there is a possible missing bounds check. This could lead to local denial of service in wlan services.

In wlan driver, there is a possible missing bounds check. This could lead to local denial of service in wlan services.

Transient DOS while handling PS event when Program Service name length offset value is set to 255.

In wlan driver, there is a possible missing bounds check, This could lead to local denial of service in wlan services.

In wlan driver, there is a possible missing bounds check. This could lead to local denial of service in wlan services.

In wlan driver, there is a possible missing bounds check. This could lead to local denial of service in wlan services.

A buffer over-read flaw was found in RH kernel versions before 5.0 in crypto_authenc_extractkeys in crypto/authenc.c in the IPsec Cryptographic algorithm's module, authenc. When a payload longer than 4 bytes, and is not following 4-byte alignment boundary guidelines, it causes a buffer over-read threat, leading to a system crash. This flaw allows a local attacker with user privileges to cause a denial of service.

TensorFlow is an end-to-end open source platform for machine learning. An attacker can cause a segfault and denial of service via accessing data outside of bounds in `tf.raw_ops.QuantizedBatchNormWithGlobalNormalization`. This is because the implementation(https://github.com/tensorflow/tensorflow/blob/55a97caa9e99c7f37a0bbbeb414dc55553d3ae7f/tensorflow/core/kernels/quantized_batch_norm_op.cc#L176-L189) assumes the inputs are not empty. If any of these inputs is empty, `.flat<T>()` is an empty buffer, so accessing the element at index 0 is accessing data outside of bounds. The fix will be included in TensorFlow 2.5.0. We will also cherrypick this commit on TensorFlow 2.4.2, TensorFlow 2.3.3, TensorFlow 2.2.3 and TensorFlow 2.1.4, as these are also affected and still in supported range.

In wlan driver, there is a possible missing bounds check, This could lead to local denial of service in wlan services.

In wlan driver, there is a possible missing bounds check, This could lead to local denial of service in wlan services.

In wlan driver, there is a possible missing bounds check, This could lead to local denial of service in wlan services.

In wlan driver, there is a possible missing bounds check, This could lead to local denial of service in wlan services.

A vulnerability was found in Open Asset Import Library Assimp 5.4.3. It has been classified as problematic. Affected is the function MDCImporter::InternReadFile of the file assimp/code/AssetLib/MDC/MDCLoader.cpp of the component MDC File Parser. The manipulation of the argument pcVerts leads to out-of-bounds read. It is possible to launch the attack on the local host. The exploit has been disclosed to the public and may be used. The project decided to collect all Fuzzer bugs in a main-issue to address them in the future.

In wlan driver, there is a possible missing bounds check, This could lead to local denial of service in wlan services.

A vulnerability classified as problematic has been found in Open Asset Import Library Assimp 5.4.3. This affects the function MDLImporter::InternReadFile_3DGS_MDL345 of the file assimp/code/AssetLib/MDL/MDLLoader.cpp. The manipulation leads to out-of-bounds read. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. The project decided to collect all Fuzzer bugs in a main-issue to address them in the future.

A vulnerability was found in Open Asset Import Library Assimp 5.4.3. It has been rated as problematic. Affected by this issue is the function MDLImporter::ImportUVCoordinate_3DGS_MDL345 of the file assimp/code/AssetLib/MDL/MDLLoader.cpp. The manipulation of the argument iIndex leads to out-of-bounds read. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. The project decided to collect all Fuzzer bugs in a main-issue to address them in the future.

A vulnerability was found in Open Asset Import Library Assimp 5.4.3. It has been declared as problematic. Affected by this vulnerability is the function LWOImporter::GetS0 in the library assimp/code/AssetLib/LWO/LWOLoader.h. The manipulation of the argument out leads to out-of-bounds read. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. The project decided to collect all Fuzzer bugs in a main-issue to address them in the future.

A vulnerability was found in Open Asset Import Library Assimp 5.4.3 and classified as problematic. This issue affects the function MDCImporter::ValidateSurfaceHeader of the file assimp/code/AssetLib/MDC/MDCLoader.cpp. The manipulation of the argument pcSurface2 leads to out-of-bounds read. Attacking locally is a requirement. The exploit has been disclosed to the public and may be used. The project decided to collect all Fuzzer bugs in a main-issue to address them in the future.

In wlan driver, there is a possible missing bounds check. This could lead to local denial of service in wlan services.

In face detect driver, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service in kernel.

Buffer overflow in McAfee Data Loss Prevention (DLPe) for Windows 11.x prior to 11.3.2.8 allows local user to cause the Windows operating system to "blue screen" via an encrypted message sent to DLPe which when decrypted results in DLPe reading unallocated memory.

Windows Common Log File System Driver Elevation of Privilege Vulnerability

An issue was discovered in the Linux kernel before 5.0.19. There is an out-of-bounds array access in __xfrm_policy_unlink, which will cause denial of service, because verify_newpolicy_info in net/xfrm/xfrm_user.c mishandles directory validation.

in OpenHarmony v5.0.2 and prior versions allow a local attacker cause DOS through out-of-bounds read.

in OpenHarmony v5.0.2 and prior versions allow a local attacker cause DOS through out-of-bounds read.

In the Linux kernel, the following vulnerability has been resolved: can: ucan: fix out of bound read in strscpy() source Commit 7fdaf8966aae ("can: ucan: use strscpy() to instead of strncpy()") unintentionally introduced a one byte out of bound read on strscpy()'s source argument (which is kind of ironic knowing that strscpy() is meant to be a more secure alternative :)). Let's consider below buffers: dest[len + 1]; /* will be NUL terminated */ src[len]; /* may not be NUL terminated */ When doing: strncpy(dest, src, len); dest[len] = '\0'; strncpy() will read up to len bytes from src. On the other hand: strscpy(dest, src, len + 1); will read up to len + 1 bytes from src, that is to say, an out of bound read of one byte will occur on src if it is not NUL terminated. Note that the src[len] byte is never copied, but strscpy() still needs to read it to check whether a truncation occurred or not. This exact pattern happened in ucan. The root cause is that the source is not NUL terminated. Instead of doing a copy in a local buffer, directly NUL terminate it as soon as usb_control_msg() returns. With this, the local firmware_str[] variable can be removed. On top of this do a couple refactors: - ucan_ctl_payload->raw is only used for the firmware string, so rename it to ucan_ctl_payload->fw_str and change its type from u8 to char. - ucan_device_request_in() is only used to retrieve the firmware string, so rename it to ucan_get_fw_str() and refactor it to make it directly handle all the string termination logic.

Out-of-bounds read in decoding malformed frame header in libsavsvc.so prior to Android 15 allows local attackers to cause memory corruption.

in OpenHarmony v5.0.2 and prior versions allow a local attacker cause DOS through out-of-bounds read.

QEMU (aka Quick Emulator), when built with the VGA display emulator support, allows local guest OS privileged users to cause a denial of service (out-of-bounds read and QEMU process crash) via vectors involving display update.

An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in iOS 18.7.2 and iPadOS 18.7.2, macOS Sequoia 15.7.2, macOS Tahoe 26.1. An app may be able to cause a denial-of-service.

Certain Huawei products (AP2000;IPS Module;NGFW Module;NIP6300;NIP6600;NIP6800;S5700;SVN5600;SVN5800;SVN5800-C;SeMG9811;Secospace AntiDDoS8000;Secospace USG6300;Secospace USG6500;Secospace USG6600;USG6000V;eSpace U1981) have a DoS vulnerability. An attacker may send crafted messages from a FTP client to exploit this vulnerability. Due to insufficient validation of the message, successful exploit may cause the system out-of-bounds read and result in a denial of service condition of the affected service.

Buffer Overflow vulnerability in open source FreeImage v.3.19.0 [r1909] allows a local attacker to cause a denial of service (DoS) via the fill_input_buffer() function when reading images in JPEG format.

In the Linux kernel, the following vulnerability has been resolved: wifi: wfx: fix memory leak when starting AP Kmemleak reported this error: unreferenced object 0xd73d1180 (size 184): comm "wpa_supplicant", pid 1559, jiffies 13006305 (age 964.245s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 1e 00 01 00 00 00 00 00 ................ backtrace: [<5ca11420>] kmem_cache_alloc+0x20c/0x5ac [<127bdd74>] __alloc_skb+0x144/0x170 [<fb8a5e38>] __netdev_alloc_skb+0x50/0x180 [<0f9fa1d5>] __ieee80211_beacon_get+0x290/0x4d4 [mac80211] [<7accd02d>] ieee80211_beacon_get_tim+0x54/0x18c [mac80211] [<41e25cc3>] wfx_start_ap+0xc8/0x234 [wfx] [<93a70356>] ieee80211_start_ap+0x404/0x6b4 [mac80211] [<a4a661cd>] nl80211_start_ap+0x76c/0x9e0 [cfg80211] [<47bd8b68>] genl_rcv_msg+0x198/0x378 [<453ef796>] netlink_rcv_skb+0xd0/0x130 [<6b7c977a>] genl_rcv+0x34/0x44 [<66b2d04d>] netlink_unicast+0x1b4/0x258 [<f965b9b6>] netlink_sendmsg+0x1e8/0x428 [<aadb8231>] ____sys_sendmsg+0x1e0/0x274 [<d2b5212d>] ___sys_sendmsg+0x80/0xb4 [<69954f45>] __sys_sendmsg+0x64/0xa8 unreferenced object 0xce087000 (size 1024): comm "wpa_supplicant", pid 1559, jiffies 13006305 (age 964.246s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 10 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............ backtrace: [<9a993714>] __kmalloc_track_caller+0x230/0x600 [<f83ea192>] kmalloc_reserve.constprop.0+0x30/0x74 [<a2c61343>] __alloc_skb+0xa0/0x170 [<fb8a5e38>] __netdev_alloc_skb+0x50/0x180 [<0f9fa1d5>] __ieee80211_beacon_get+0x290/0x4d4 [mac80211] [<7accd02d>] ieee80211_beacon_get_tim+0x54/0x18c [mac80211] [<41e25cc3>] wfx_start_ap+0xc8/0x234 [wfx] [<93a70356>] ieee80211_start_ap+0x404/0x6b4 [mac80211] [<a4a661cd>] nl80211_start_ap+0x76c/0x9e0 [cfg80211] [<47bd8b68>] genl_rcv_msg+0x198/0x378 [<453ef796>] netlink_rcv_skb+0xd0/0x130 [<6b7c977a>] genl_rcv+0x34/0x44 [<66b2d04d>] netlink_unicast+0x1b4/0x258 [<f965b9b6>] netlink_sendmsg+0x1e8/0x428 [<aadb8231>] ____sys_sendmsg+0x1e0/0x274 [<d2b5212d>] ___sys_sendmsg+0x80/0xb4 However, since the kernel is build optimized, it seems the stack is not accurate. It appears the issue is related to wfx_set_mfp_ap(). The issue is obvious in this function: memory allocated by ieee80211_beacon_get() is never released. Fixing this leak makes kmemleak happy.

Libtpms is a library that targets the integration of TPM functionality into hypervisors, primarily into Qemu. Libtpms, which is derived from the TPM 2.0 reference implementation code published by the Trusted Computing Group, is prone to a potential out of bounds (OOB) read vulnerability. The vulnerability occurs in the ‘CryptHmacSign’ function with an inconsistent pairing of the signKey and signScheme parameters, where the signKey is ALG_KEYEDHASH key and inScheme is an ECC or RSA scheme. The reported vulnerability is in the ‘CryptHmacSign’ function, which is defined in the "Part 4: Supporting Routines – Code" document, section "7.151 - /tpm/src/crypt/CryptUtil.c ". This vulnerability can be triggered from user-mode applications by sending malicious commands to a TPM 2.0/vTPM (swtpm) whose firmware is based on an affected TCG reference implementation. The effect on libtpms is that it will cause an abort due to the detection of the out-of-bounds access, thus for example making a vTPM (swtpm) unavailable to a VM. This vulnerability is fixed in 0.7.12, 0.8.10, 0.9.7, and 0.10.1.

In the Linux kernel, the following vulnerability has been resolved: clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor(). Only compile tested.

Out of bounds read in firmware for some Intel(R) Wireless Bluetooth(R) and Killer(TM) Bluetooth(R) products before version 22.120 may allow an authenticated user to potentially enable denial of service via local access.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix slab-out-of-bounds in smb2_allocate_rsp_buf If ->ProtocolId is SMB2_TRANSFORM_PROTO_NUM, smb2 request size validation could be skipped. if request size is smaller than sizeof(struct smb2_query_info_req), slab-out-of-bounds read can happen in smb2_allocate_rsp_buf(). This patch allocate response buffer after decrypting transform request. smb3_decrypt_req() will validate transform request size and avoid slab-out-of-bound in smb2_allocate_rsp_buf().

In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: x86: Don't overflow lpage_info when checking attributes Fix KVM_SET_MEMORY_ATTRIBUTES to not overflow lpage_info array and trigger KASAN splat, as seen in the private_mem_conversions_test selftest. When memory attributes are set on a GFN range, that range will have specific properties applied to the TDP. A huge page cannot be used when the attributes are inconsistent, so they are disabled for those the specific huge pages. For internal KVM reasons, huge pages are also not allowed to span adjacent memslots regardless of whether the backing memory could be mapped as huge. What GFNs support which huge page sizes is tracked by an array of arrays 'lpage_info' on the memslot, of ‘kvm_lpage_info’ structs. Each index of lpage_info contains a vmalloc allocated array of these for a specific supported page size. The kvm_lpage_info denotes whether a specific huge page (GFN and page size) on the memslot is supported. These arrays include indices for unaligned head and tail huge pages. Preventing huge pages from spanning adjacent memslot is covered by incrementing the count in head and tail kvm_lpage_info when the memslot is allocated, but disallowing huge pages for memory that has mixed attributes has to be done in a more complicated way. During the KVM_SET_MEMORY_ATTRIBUTES ioctl KVM updates lpage_info for each memslot in the range that has mismatched attributes. KVM does this a memslot at a time, and marks a special bit, KVM_LPAGE_MIXED_FLAG, in the kvm_lpage_info for any huge page. This bit is essentially a permanently elevated count. So huge pages will not be mapped for the GFN at that page size if the count is elevated in either case: a huge head or tail page unaligned to the memslot or if KVM_LPAGE_MIXED_FLAG is set because it has mixed attributes. To determine whether a huge page has consistent attributes, the KVM_SET_MEMORY_ATTRIBUTES operation checks an xarray to make sure it consistently has the incoming attribute. Since level - 1 huge pages are aligned to level huge pages, it employs an optimization. As long as the level - 1 huge pages are checked first, it can just check these and assume that if each level - 1 huge page contained within the level sized huge page is not mixed, then the level size huge page is not mixed. This optimization happens in the helper hugepage_has_attrs(). Unfortunately, although the kvm_lpage_info array representing page size 'level' will contain an entry for an unaligned tail page of size level, the array for level - 1 will not contain an entry for each GFN at page size level. The level - 1 array will only contain an index for any unaligned region covered by level - 1 huge page size, which can be a smaller region. So this causes the optimization to overflow the level - 1 kvm_lpage_info and perform a vmalloc out of bounds read. In some cases of head and tail pages where an overflow could happen, callers skip the operation completely as KVM_LPAGE_MIXED_FLAG is not required to prevent huge pages as discussed earlier. But for memslots that are smaller than the 1GB page size, it does call hugepage_has_attrs(). In this case the huge page is both the head and tail page. The issue can be observed simply by compiling the kernel with CONFIG_KASAN_VMALLOC and running the selftest “private_mem_conversions_test”, which produces the output like the following: BUG: KASAN: vmalloc-out-of-bounds in hugepage_has_attrs+0x7e/0x110 Read of size 4 at addr ffffc900000a3008 by task private_mem_con/169 Call Trace: dump_stack_lvl print_report ? __virt_addr_valid ? hugepage_has_attrs ? hugepage_has_attrs kasan_report ? hugepage_has_attrs hugepage_has_attrs kvm_arch_post_set_memory_attributes kvm_vm_ioctl It is a little ambiguous whether the unaligned head page (in the bug case also the tail page) should be expected to have KVM_LPAGE_MIXED_FLAG set. It is not functionally required, as the unal ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Implement bounds check for stream encoder creation in DCN301 'stream_enc_regs' array is an array of dcn10_stream_enc_registers structures. The array is initialized with four elements, corresponding to the four calls to stream_enc_regs() in the array initializer. This means that valid indices for this array are 0, 1, 2, and 3. The error message 'stream_enc_regs' 4 <= 5 below, is indicating that there is an attempt to access this array with an index of 5, which is out of bounds. This could lead to undefined behavior Here, eng_id is used as an index to access the stream_enc_regs array. If eng_id is 5, this would result in an out-of-bounds access on the stream_enc_regs array. Thus fixing Buffer overflow error in dcn301_stream_encoder_create reported by Smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn301/dcn301_resource.c:1011 dcn301_stream_encoder_create() error: buffer overflow 'stream_enc_regs' 4 <= 5

In the Linux kernel, the following vulnerability has been resolved: iio: magnetometer: rm3100: add boundary check for the value read from RM3100_REG_TMRC Recently, we encounter kernel crash in function rm3100_common_probe caused by out of bound access of array rm3100_samp_rates (because of underlying hardware failures). Add boundary check to prevent out of bound access.

The cbstream.sys driver in Carbon Black 5.1.1.60603 allows local users with admin privileges to cause a denial of service (out-of-bounds read and system crash) via a large counter value in an 0x62430028 IOCTL call.

c-ares is a C library for asynchronous DNS requests. `ares__read_line()` is used to parse local configuration files such as `/etc/resolv.conf`, `/etc/nsswitch.conf`, the `HOSTALIASES` file, and if using a c-ares version prior to 1.27.0, the `/etc/hosts` file. If any of these configuration files has an embedded `NULL` character as the first character in a new line, it can lead to attempting to read memory prior to the start of the given buffer which may result in a crash. This issue is fixed in c-ares 1.27.0. No known workarounds exist.

Windows DWM Core Library Information Disclosure Vulnerability

An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in macOS Sonoma 14.7.7, macOS Ventura 13.7.7, macOS Sequoia 15.6. An app may be able to cause unexpected system termination.

Non Secure Kernel can cause Trustzone to do an arbitrary memory read which will result into DOS in Snapdragon Auto, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking in APQ8017, APQ8053, APQ8096, APQ8096AU, IPQ8074, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8996, MSM8996AU, QCA8081, QM215, SDM429, SDM439, SDM450, SDM632, Snapdragon_High_Med_2016

Vba32 Antivirus v3.36.0 is vulnerable to a Denial of Service vulnerability by triggering the 0x2220A7 IOCTL code of the Vba32m64.sys driver.

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix out-of-bound memcpy() during ethtool -w When retrieving the FW coredump using ethtool, it can sometimes cause memory corruption: BUG: KFENCE: memory corruption in __bnxt_get_coredump+0x3ef/0x670 [bnxt_en] Corrupted memory at 0x000000008f0f30e8 [ ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ] (in kfence-#45): __bnxt_get_coredump+0x3ef/0x670 [bnxt_en] ethtool_get_dump_data+0xdc/0x1a0 __dev_ethtool+0xa1e/0x1af0 dev_ethtool+0xa8/0x170 dev_ioctl+0x1b5/0x580 sock_do_ioctl+0xab/0xf0 sock_ioctl+0x1ce/0x2e0 __x64_sys_ioctl+0x87/0xc0 do_syscall_64+0x5c/0xf0 entry_SYSCALL_64_after_hwframe+0x78/0x80 ... This happens when copying the coredump segment list in bnxt_hwrm_dbg_dma_data() with the HWRM_DBG_COREDUMP_LIST FW command. The info->dest_buf buffer is allocated based on the number of coredump segments returned by the FW. The segment list is then DMA'ed by the FW and the length of the DMA is returned by FW. The driver then copies this DMA'ed segment list to info->dest_buf. In some cases, this DMA length may exceed the info->dest_buf length and cause the above BUG condition. Fix it by capping the copy length to not exceed the length of info->dest_buf. The extra DMA data contains no useful information. This code path is shared for the HWRM_DBG_COREDUMP_LIST and the HWRM_DBG_COREDUMP_RETRIEVE FW commands. The buffering is different for these 2 FW commands. To simplify the logic, we need to move the line to adjust the buffer length for HWRM_DBG_COREDUMP_RETRIEVE up, so that the new check to cap the copy length will work for both commands.