A flaw null pointer dereference in the Linux kernel UDF file system functionality was found in the way user triggers udf_file_write_iter function for the malicious UDF image. A local user could use this flaw to crash the system. Actual from Linux kernel 4.2-rc1 till 5.17-rc2.

A flaw was found in the filelock_init in fs/locks.c function in the Linux kernel. This issue can lead to host memory exhaustion due to memcg not limiting the number of Portable Operating System Interface (POSIX) file locks.

A NULL pointer dereference flaw was found in the SCSI emulation support of QEMU in versions before 6.0.0. This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of service. The highest threat from this vulnerability is to system availability.

A NULL pointer dereference flaw was found in the Linux kernel's BPF subsystem in the way a user triggers the map_get_next_key function of the BPF bloom filter. This flaw allows a local user to crash the system. This flaw affects Linux kernel versions prior to 5.17-rc1.

In the Linux kernel, the following vulnerability has been resolved: phy: mdio: fix memory leak Syzbot reported memory leak in MDIO bus interface, the problem was in wrong state logic. MDIOBUS_ALLOCATED indicates 2 states: 1. Bus is only allocated 2. Bus allocated and __mdiobus_register() fails, but device_register() was called In case of device_register() has been called we should call put_device() to correctly free the memory allocated for this device, but mdiobus_free() calls just kfree(dev) in case of MDIOBUS_ALLOCATED state To avoid this behaviour we need to set bus->state to MDIOBUS_UNREGISTERED _before_ calling device_register(), because put_device() should be called even in case of device_register() failure.

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu: Fix arm_smmu_device refcount leak in address translation The reference counting issue happens in several exception handling paths of arm_smmu_iova_to_phys_hard(). When those error scenarios occur, the function forgets to decrease the refcount of "smmu" increased by arm_smmu_rpm_get(), causing a refcount leak. Fix this issue by jumping to "out" label when those error scenarios occur.

In the Linux kernel, the following vulnerability has been resolved: net: rds: fix memory leak in rds_recvmsg Syzbot reported memory leak in rds. The problem was in unputted refcount in case of error. int rds_recvmsg(struct socket *sock, struct msghdr *msg, size_t size, int msg_flags) { ... if (!rds_next_incoming(rs, &inc)) { ... } After this "if" inc refcount incremented and if (rds_cmsg_recv(inc, msg, rs)) { ret = -EFAULT; goto out; } ... out: return ret; } in case of rds_cmsg_recv() fail the refcount won't be decremented. And it's easy to see from ftrace log, that rds_inc_addref() don't have rds_inc_put() pair in rds_recvmsg() after rds_cmsg_recv() 1) | rds_recvmsg() { 1) 3.721 us | rds_inc_addref(); 1) 3.853 us | rds_message_inc_copy_to_user(); 1) + 10.395 us | rds_cmsg_recv(); 1) + 34.260 us | }

In the Linux kernel, the following vulnerability has been resolved: libbpf: Fix memory leak in strset Free struct strset itself, not just its internal parts.

In the Linux kernel, the following vulnerability has been resolved: blk-mq: cancel blk-mq dispatch work in both blk_cleanup_queue and disk_release() For avoiding to slow down queue destroy, we don't call blk_mq_quiesce_queue() in blk_cleanup_queue(), instead of delaying to cancel dispatch work in blk_release_queue(). However, this way has caused kernel oops[1], reported by Changhui. The log shows that scsi_device can be freed before running blk_release_queue(), which is expected too since scsi_device is released after the scsi disk is closed and the scsi_device is removed. Fixes the issue by canceling blk-mq dispatch work in both blk_cleanup_queue() and disk_release(): 1) when disk_release() is run, the disk has been closed, and any sync dispatch activities have been done, so canceling dispatch work is enough to quiesce filesystem I/O dispatch activity. 2) in blk_cleanup_queue(), we only focus on passthrough request, and passthrough request is always explicitly allocated & freed by its caller, so once queue is frozen, all sync dispatch activity for passthrough request has been done, then it is enough to just cancel dispatch work for avoiding any dispatch activity. [1] kernel panic log [12622.769416] BUG: kernel NULL pointer dereference, address: 0000000000000300 [12622.777186] #PF: supervisor read access in kernel mode [12622.782918] #PF: error_code(0x0000) - not-present page [12622.788649] PGD 0 P4D 0 [12622.791474] Oops: 0000 [#1] PREEMPT SMP PTI [12622.796138] CPU: 10 PID: 744 Comm: kworker/10:1H Kdump: loaded Not tainted 5.15.0+ #1 [12622.804877] Hardware name: Dell Inc. PowerEdge R730/0H21J3, BIOS 1.5.4 10/002/2015 [12622.813321] Workqueue: kblockd blk_mq_run_work_fn [12622.818572] RIP: 0010:sbitmap_get+0x75/0x190 [12622.823336] Code: 85 80 00 00 00 41 8b 57 08 85 d2 0f 84 b1 00 00 00 45 31 e4 48 63 cd 48 8d 1c 49 48 c1 e3 06 49 03 5f 10 4c 8d 6b 40 83 f0 01 <48> 8b 33 44 89 f2 4c 89 ef 0f b6 c8 e8 fa f3 ff ff 83 f8 ff 75 58 [12622.844290] RSP: 0018:ffffb00a446dbd40 EFLAGS: 00010202 [12622.850120] RAX: 0000000000000001 RBX: 0000000000000300 RCX: 0000000000000004 [12622.858082] RDX: 0000000000000006 RSI: 0000000000000082 RDI: ffffa0b7a2dfe030 [12622.866042] RBP: 0000000000000004 R08: 0000000000000001 R09: ffffa0b742721334 [12622.874003] R10: 0000000000000008 R11: 0000000000000008 R12: 0000000000000000 [12622.881964] R13: 0000000000000340 R14: 0000000000000000 R15: ffffa0b7a2dfe030 [12622.889926] FS: 0000000000000000(0000) GS:ffffa0baafb40000(0000) knlGS:0000000000000000 [12622.898956] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12622.905367] CR2: 0000000000000300 CR3: 0000000641210001 CR4: 00000000001706e0 [12622.913328] Call Trace: [12622.916055] <TASK> [12622.918394] scsi_mq_get_budget+0x1a/0x110 [12622.922969] __blk_mq_do_dispatch_sched+0x1d4/0x320 [12622.928404] ? pick_next_task_fair+0x39/0x390 [12622.933268] __blk_mq_sched_dispatch_requests+0xf4/0x140 [12622.939194] blk_mq_sched_dispatch_requests+0x30/0x60 [12622.944829] __blk_mq_run_hw_queue+0x30/0xa0 [12622.949593] process_one_work+0x1e8/0x3c0 [12622.954059] worker_thread+0x50/0x3b0 [12622.958144] ? rescuer_thread+0x370/0x370 [12622.962616] kthread+0x158/0x180 [12622.966218] ? set_kthread_struct+0x40/0x40 [12622.970884] ret_from_fork+0x22/0x30 [12622.974875] </TASK> [12622.977309] Modules linked in: scsi_debug rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs sunrpc dm_multipath intel_rapl_msr intel_rapl_common dell_wmi_descriptor sb_edac rfkill video x86_pkg_temp_thermal intel_powerclamp dcdbas coretemp kvm_intel kvm mgag200 irqbypass i2c_algo_bit rapl drm_kms_helper ipmi_ssif intel_cstate intel_uncore syscopyarea sysfillrect sysimgblt fb_sys_fops pcspkr cec mei_me lpc_ich mei ipmi_si ipmi_devintf ipmi_msghandler acpi_power_meter drm fuse xfs libcrc32c sr_mod cdrom sd_mod t10_pi sg ixgbe ahci libahci crct10dif_pclmul crc32_pclmul crc32c_intel libata megaraid_sas ghash_clmulni_intel tg3 wdat_w ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: hamradio: fix memory leak in mkiss_close My local syzbot instance hit memory leak in mkiss_open()[1]. The problem was in missing free_netdev() in mkiss_close(). In mkiss_open() netdevice is allocated and then registered, but in mkiss_close() netdevice was only unregistered, but not freed. Fail log: BUG: memory leak unreferenced object 0xffff8880281ba000 (size 4096): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 61 78 30 00 00 00 00 00 00 00 00 00 00 00 00 00 ax0............. 00 27 fa 2a 80 88 ff ff 00 00 00 00 00 00 00 00 .'.*............ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706e7e8>] alloc_netdev_mqs+0x98/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff8880141a9a00 (size 96): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): e8 a2 1b 28 80 88 ff ff e8 a2 1b 28 80 88 ff ff ...(.......(.... 98 92 9c aa b0 40 02 00 00 00 00 00 00 00 00 00 .....@.......... backtrace: [<ffffffff8709f68b>] __hw_addr_create_ex+0x5b/0x310 [<ffffffff8709fb38>] __hw_addr_add_ex+0x1f8/0x2b0 [<ffffffff870a0c7b>] dev_addr_init+0x10b/0x1f0 [<ffffffff8706e88b>] alloc_netdev_mqs+0x13b/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff8880219bfc00 (size 512): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 00 a0 1b 28 80 88 ff ff 80 8f b1 8d ff ff ff ff ...(............ 80 8f b1 8d ff ff ff ff 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706eec7>] alloc_netdev_mqs+0x777/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff888029b2b200 (size 256): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706f062>] alloc_netdev_mqs+0x912/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check, fallback to non-AVX2 version Arturo reported this backtrace: [709732.358791] WARNING: CPU: 3 PID: 456 at arch/x86/kernel/fpu/core.c:128 kernel_fpu_begin_mask+0xae/0xe0 [709732.358793] Modules linked in: binfmt_misc nft_nat nft_chain_nat nf_nat nft_counter nft_ct nf_tables nf_conntrack_netlink nfnetlink 8021q garp stp mrp llc vrf intel_rapl_msr intel_rapl_common skx_edac nfit libnvdimm ipmi_ssif x86_pkg_temp_thermal intel_powerclamp coretemp crc32_pclmul mgag200 ghash_clmulni_intel drm_kms_helper cec aesni_intel drm libaes crypto_simd cryptd glue_helper mei_me dell_smbios iTCO_wdt evdev intel_pmc_bxt iTCO_vendor_support dcdbas pcspkr rapl dell_wmi_descriptor wmi_bmof sg i2c_algo_bit watchdog mei acpi_ipmi ipmi_si button nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ipmi_devintf ipmi_msghandler ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 dm_mod raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor sd_mod t10_pi crc_t10dif crct10dif_generic raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod ahci libahci tg3 libata xhci_pci libphy xhci_hcd ptp usbcore crct10dif_pclmul crct10dif_common bnxt_en crc32c_intel scsi_mod [709732.358941] pps_core i2c_i801 lpc_ich i2c_smbus wmi usb_common [709732.358957] CPU: 3 PID: 456 Comm: jbd2/dm-0-8 Not tainted 5.10.0-0.bpo.5-amd64 #1 Debian 5.10.24-1~bpo10+1 [709732.358959] Hardware name: Dell Inc. PowerEdge R440/04JN2K, BIOS 2.9.3 09/23/2020 [709732.358964] RIP: 0010:kernel_fpu_begin_mask+0xae/0xe0 [709732.358969] Code: ae 54 24 04 83 e3 01 75 38 48 8b 44 24 08 65 48 33 04 25 28 00 00 00 75 33 48 83 c4 10 5b c3 65 8a 05 5e 21 5e 76 84 c0 74 92 <0f> 0b eb 8e f0 80 4f 01 40 48 81 c7 00 14 00 00 e8 dd fb ff ff eb [709732.358972] RSP: 0018:ffffbb9700304740 EFLAGS: 00010202 [709732.358976] RAX: 0000000000000001 RBX: 0000000000000003 RCX: 0000000000000001 [709732.358979] RDX: ffffbb9700304970 RSI: ffff922fe1952e00 RDI: 0000000000000003 [709732.358981] RBP: ffffbb9700304970 R08: ffff922fc868a600 R09: ffff922fc711e462 [709732.358984] R10: 000000000000005f R11: ffff922ff0b27180 R12: ffffbb9700304960 [709732.358987] R13: ffffbb9700304b08 R14: ffff922fc664b6c8 R15: ffff922fc664b660 [709732.358990] FS: 0000000000000000(0000) GS:ffff92371fec0000(0000) knlGS:0000000000000000 [709732.358993] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [709732.358996] CR2: 0000557a6655bdd0 CR3: 000000026020a001 CR4: 00000000007706e0 [709732.358999] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [709732.359001] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [709732.359003] PKRU: 55555554 [709732.359005] Call Trace: [709732.359009] <IRQ> [709732.359035] nft_pipapo_avx2_lookup+0x4c/0x1cba [nf_tables] [709732.359046] ? sched_clock+0x5/0x10 [709732.359054] ? sched_clock_cpu+0xc/0xb0 [709732.359061] ? record_times+0x16/0x80 [709732.359068] ? plist_add+0xc1/0x100 [709732.359073] ? psi_group_change+0x47/0x230 [709732.359079] ? skb_clone+0x4d/0xb0 [709732.359085] ? enqueue_task_rt+0x22b/0x310 [709732.359098] ? bnxt_start_xmit+0x1e8/0xaf0 [bnxt_en] [709732.359102] ? packet_rcv+0x40/0x4a0 [709732.359121] nft_lookup_eval+0x59/0x160 [nf_tables] [709732.359133] nft_do_chain+0x350/0x500 [nf_tables] [709732.359152] ? nft_lookup_eval+0x59/0x160 [nf_tables] [709732.359163] ? nft_do_chain+0x364/0x500 [nf_tables] [709732.359172] ? fib4_rule_action+0x6d/0x80 [709732.359178] ? fib_rules_lookup+0x107/0x250 [709732.359184] nft_nat_do_chain+0x8a/0xf2 [nft_chain_nat] [709732.359193] nf_nat_inet_fn+0xea/0x210 [nf_nat] [709732.359202] nf_nat_ipv4_out+0x14/0xa0 [nf_nat] [709732.359207] nf_hook_slow+0x44/0xc0 [709732.359214] ip_output+0xd2/0x100 [709732.359221] ? __ip_finish_output+0x210/0x210 [709732.359226] ip_forward+0x37d/0x4a0 [709732.359232] ? ip4_key_hashfn+0xb0/0xb0 [709732.359238] ip_subli ---truncated---

In the Linux kernel, the following vulnerability has been resolved: s390/qeth: fix NULL deref in qeth_clear_working_pool_list() When qeth_set_online() calls qeth_clear_working_pool_list() to roll back after an error exit from qeth_hardsetup_card(), we are at risk of accessing card->qdio.in_q before it was allocated by qeth_alloc_qdio_queues() via qeth_mpc_initialize(). qeth_clear_working_pool_list() then dereferences NULL, and by writing to queue->bufs[i].pool_entry scribbles all over the CPU's lowcore. Resulting in a crash when those lowcore areas are used next (eg. on the next machine-check interrupt). Such a scenario would typically happen when the device is first set online and its queues aren't allocated yet. An early IO error or certain misconfigs (eg. mismatched transport mode, bad portno) then cause us to error out from qeth_hardsetup_card() with card->qdio.in_q still being NULL. Fix it by checking the pointer for NULL before accessing it. Note that we also have (rare) paths inside qeth_mpc_initialize() where a configuration change can cause us to free the existing queues, expecting that subsequent code will allocate them again. If we then error out before that re-allocation happens, the same bug occurs. Root-caused-by: Heiko Carstens <hca@linux.ibm.com>

In the Linux kernel, the following vulnerability has been resolved: ethtool: ioctl: fix potential NULL deref in ethtool_set_coalesce() ethtool_set_coalesce() now uses both the .get_coalesce() and .set_coalesce() callbacks. But the check for their availability is buggy, so changing the coalesce settings on a device where the driver provides only _one_ of the callbacks results in a NULL pointer dereference instead of an -EOPNOTSUPP. Fix the condition so that the availability of both callbacks is ensured. This also matches the netlink code. Note that reproducing this requires some effort - it only affects the legacy ioctl path, and needs a specific combination of driver options: - have .get_coalesce() and .coalesce_supported but no .set_coalesce(), or - have .set_coalesce() but no .get_coalesce(). Here eg. ethtool doesn't cause the crash as it first attempts to call ethtool_get_coalesce() and bails out on error.

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix tc flower deletion for VLAN priority Rx steering To replicate the issue:- 1) Add 1 flower filter for VLAN Priority based frame steering:- $ IFDEVNAME=eth0 $ tc qdisc add dev $IFDEVNAME ingress $ tc qdisc add dev $IFDEVNAME root mqprio num_tc 8 \ map 0 1 2 3 4 5 6 7 0 0 0 0 0 0 0 0 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0 $ tc filter add dev $IFDEVNAME parent ffff: protocol 802.1Q \ flower vlan_prio 0 hw_tc 0 2) Get the 'pref' id $ tc filter show dev $IFDEVNAME ingress 3) Delete a specific tc flower record (say pref 49151) $ tc filter del dev $IFDEVNAME parent ffff: pref 49151 From dmesg, we will observe kernel NULL pointer ooops [ 197.170464] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 197.171367] #PF: supervisor read access in kernel mode [ 197.171367] #PF: error_code(0x0000) - not-present page [ 197.171367] PGD 0 P4D 0 [ 197.171367] Oops: 0000 [#1] PREEMPT SMP NOPTI <snip> [ 197.171367] RIP: 0010:tc_setup_cls+0x20b/0x4a0 [stmmac] <snip> [ 197.171367] Call Trace: [ 197.171367] <TASK> [ 197.171367] ? __stmmac_disable_all_queues+0xa8/0xe0 [stmmac] [ 197.171367] stmmac_setup_tc_block_cb+0x70/0x110 [stmmac] [ 197.171367] tc_setup_cb_destroy+0xb3/0x180 [ 197.171367] fl_hw_destroy_filter+0x94/0xc0 [cls_flower] The above issue is due to previous incorrect implementation of tc_del_vlan_flow(), shown below, that uses flow_cls_offload_flow_rule() to get struct flow_rule *rule which is no longer valid for tc filter delete operation. struct flow_rule *rule = flow_cls_offload_flow_rule(cls); struct flow_dissector *dissector = rule->match.dissector; So, to ensure tc_del_vlan_flow() deletes the right VLAN cls record for earlier configured RX queue (configured by hw_tc) in tc_add_vlan_flow(), this patch introduces stmmac_rfs_entry as driver-side flow_cls_offload record for 'RX frame steering' tc flower, currently used for VLAN priority. The implementation has taken consideration for future extension to include other type RX frame steering such as EtherType based. v2: - Clean up overly extensive backtrace and rewrite git message to better explain the kernel NULL pointer issue.

In the Linux kernel, the following vulnerability has been resolved: serial: rp2: use 'request_firmware' instead of 'request_firmware_nowait' In 'rp2_probe', the driver registers 'rp2_uart_interrupt' then calls 'rp2_fw_cb' through 'request_firmware_nowait'. In 'rp2_fw_cb', if the firmware don't exists, function just return without initializing ports of 'rp2_card'. But now the interrupt handler function has been registered, and when an interrupt comes, 'rp2_uart_interrupt' may access those ports then causing NULL pointer dereference or other bugs. Because the driver does some initialization work in 'rp2_fw_cb', in order to make the driver ready to handle interrupts, 'request_firmware' should be used instead of asynchronous 'request_firmware_nowait'. This report reveals it: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef-dirty #45 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59- gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xec/0x156 lib/dump_stack.c:118 assign_lock_key kernel/locking/lockdep.c:727 [inline] register_lock_class+0x14e5/0x1ba0 kernel/locking/lockdep.c:753 __lock_acquire+0x187/0x3750 kernel/locking/lockdep.c:3303 lock_acquire+0x124/0x340 kernel/locking/lockdep.c:3907 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x32/0x50 kernel/locking/spinlock.c:144 spin_lock include/linux/spinlock.h:329 [inline] rp2_ch_interrupt drivers/tty/serial/rp2.c:466 [inline] rp2_asic_interrupt.isra.9+0x15d/0x990 drivers/tty/serial/rp2.c:493 rp2_uart_interrupt+0x49/0xe0 drivers/tty/serial/rp2.c:504 __handle_irq_event_percpu+0xfb/0x770 kernel/irq/handle.c:149 handle_irq_event_percpu+0x79/0x150 kernel/irq/handle.c:189 handle_irq_event+0xac/0x140 kernel/irq/handle.c:206 handle_fasteoi_irq+0x232/0x5c0 kernel/irq/chip.c:725 generic_handle_irq_desc include/linux/irqdesc.h:155 [inline] handle_irq+0x230/0x3a0 arch/x86/kernel/irq_64.c:87 do_IRQ+0xa7/0x1e0 arch/x86/kernel/irq.c:247 common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670 </IRQ> RIP: 0010:native_safe_halt+0x28/0x30 arch/x86/include/asm/irqflags.h:61 Code: 00 00 55 be 04 00 00 00 48 c7 c7 00 c2 2f 8c 48 89 e5 e8 fb 31 e7 f8 8b 05 75 af 8d 03 85 c0 7e 07 0f 00 2d 8a 61 65 00 fb f4 <5d> c3 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 RSP: 0018:ffff88806b71fcc8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde RAX: 0000000000000000 RBX: ffffffff8bde7e48 RCX: ffffffff88a21285 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff8c2fc200 RBP: ffff88806b71fcc8 R08: fffffbfff185f840 R09: fffffbfff185f840 R10: 0000000000000001 R11: fffffbfff185f840 R12: 0000000000000002 R13: ffffffff8bea18a0 R14: 0000000000000000 R15: 0000000000000000 arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline] default_idle+0x6f/0x360 arch/x86/kernel/process.c:557 arch_cpu_idle+0xf/0x20 arch/x86/kernel/process.c:548 default_idle_call+0x3b/0x60 kernel/sched/idle.c:93 cpuidle_idle_call kernel/sched/idle.c:153 [inline] do_idle+0x2ab/0x3c0 kernel/sched/idle.c:263 cpu_startup_entry+0xcb/0xe0 kernel/sched/idle.c:369 start_secondary+0x3b8/0x4e0 arch/x86/kernel/smpboot.c:271 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243 BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 PGD 8000000056d27067 P4D 8000000056d27067 PUD 56d28067 PMD 0 Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef-dirty #45 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59- gc9ba5276e321-prebuilt.qemu.org 04/01/2014 RIP: 0010:readl arch/x86/include/asm/io.h:59 [inline] RIP: 0010:rp2_ch_interrupt drivers/tty/serial/rp2.c:472 [inline] RIP: 0010:rp2_asic_interrupt.isra.9+0x181/0x990 drivers/tty/serial/rp2.c: 493 Co ---truncated---

In the Linux kernel, the following vulnerability has been resolved: s390/dasd: add missing discipline function Fix crash with illegal operation exception in dasd_device_tasklet. Commit b72949328869 ("s390/dasd: Prepare for additional path event handling") renamed the verify_path function for ECKD but not for FBA and DIAG. This leads to a panic when the path verification function is called for a FBA or DIAG device. Fix by defining a wrapper function for dasd_generic_verify_path().

In the Linux kernel, the following vulnerability has been resolved: i40e: Fix NULL ptr dereference on VSI filter sync Remove the reason of null pointer dereference in sync VSI filters. Added new I40E_VSI_RELEASING flag to signalize deleting and releasing of VSI resources to sync this thread with sync filters subtask. Without this patch it is possible to start update the VSI filter list after VSI is removed, that's causing a kernel oops.

In the Linux kernel, the following vulnerability has been resolved: binder: make sure fd closes complete During BC_FREE_BUFFER processing, the BINDER_TYPE_FDA object cleanup may close 1 or more fds. The close operations are completed using the task work mechanism -- which means the thread needs to return to userspace or the file object may never be dereferenced -- which can lead to hung processes. Force the binder thread back to userspace if an fd is closed during BC_FREE_BUFFER handling.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: fs, lock FTE when checking if active The referenced commits introduced a two-step process for deleting FTEs: - Lock the FTE, delete it from hardware, set the hardware deletion function to NULL and unlock the FTE. - Lock the parent flow group, delete the software copy of the FTE, and remove it from the xarray. However, this approach encounters a race condition if a rule with the same match value is added simultaneously. In this scenario, fs_core may set the hardware deletion function to NULL prematurely, causing a panic during subsequent rule deletions. To prevent this, ensure the active flag of the FTE is checked under a lock, which will prevent the fs_core layer from attaching a new steering rule to an FTE that is in the process of deletion. [ 438.967589] MOSHE: 2496 mlx5_del_flow_rules del_hw_func [ 438.968205] ------------[ cut here ]------------ [ 438.968654] refcount_t: decrement hit 0; leaking memory. [ 438.969249] WARNING: CPU: 0 PID: 8957 at lib/refcount.c:31 refcount_warn_saturate+0xfb/0x110 [ 438.970054] Modules linked in: act_mirred cls_flower act_gact sch_ingress openvswitch nsh mlx5_vdpa vringh vhost_iotlb vdpa mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core zram zsmalloc fuse [last unloaded: cls_flower] [ 438.973288] CPU: 0 UID: 0 PID: 8957 Comm: tc Not tainted 6.12.0-rc1+ #8 [ 438.973888] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 438.974874] RIP: 0010:refcount_warn_saturate+0xfb/0x110 [ 438.975363] Code: 40 66 3b 82 c6 05 16 e9 4d 01 01 e8 1f 7c a0 ff 0f 0b c3 cc cc cc cc 48 c7 c7 10 66 3b 82 c6 05 fd e8 4d 01 01 e8 05 7c a0 ff <0f> 0b c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 90 [ 438.976947] RSP: 0018:ffff888124a53610 EFLAGS: 00010286 [ 438.977446] RAX: 0000000000000000 RBX: ffff888119d56de0 RCX: 0000000000000000 [ 438.978090] RDX: ffff88852c828700 RSI: ffff88852c81b3c0 RDI: ffff88852c81b3c0 [ 438.978721] RBP: ffff888120fa0e88 R08: 0000000000000000 R09: ffff888124a534b0 [ 438.979353] R10: 0000000000000001 R11: 0000000000000001 R12: ffff888119d56de0 [ 438.979979] R13: ffff888120fa0ec0 R14: ffff888120fa0ee8 R15: ffff888119d56de0 [ 438.980607] FS: 00007fe6dcc0f800(0000) GS:ffff88852c800000(0000) knlGS:0000000000000000 [ 438.983984] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 438.984544] CR2: 00000000004275e0 CR3: 0000000186982001 CR4: 0000000000372eb0 [ 438.985205] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 438.985842] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 438.986507] Call Trace: [ 438.986799] <TASK> [ 438.987070] ? __warn+0x7d/0x110 [ 438.987426] ? refcount_warn_saturate+0xfb/0x110 [ 438.987877] ? report_bug+0x17d/0x190 [ 438.988261] ? prb_read_valid+0x17/0x20 [ 438.988659] ? handle_bug+0x53/0x90 [ 438.989054] ? exc_invalid_op+0x14/0x70 [ 438.989458] ? asm_exc_invalid_op+0x16/0x20 [ 438.989883] ? refcount_warn_saturate+0xfb/0x110 [ 438.990348] mlx5_del_flow_rules+0x2f7/0x340 [mlx5_core] [ 438.990932] __mlx5_eswitch_del_rule+0x49/0x170 [mlx5_core] [ 438.991519] ? mlx5_lag_is_sriov+0x3c/0x50 [mlx5_core] [ 438.992054] ? xas_load+0x9/0xb0 [ 438.992407] mlx5e_tc_rule_unoffload+0x45/0xe0 [mlx5_core] [ 438.993037] mlx5e_tc_del_fdb_flow+0x2a6/0x2e0 [mlx5_core] [ 438.993623] mlx5e_flow_put+0x29/0x60 [mlx5_core] [ 438.994161] mlx5e_delete_flower+0x261/0x390 [mlx5_core] [ 438.994728] tc_setup_cb_destroy+0xb9/0x190 [ 438.995150] fl_hw_destroy_filter+0x94/0xc0 [cls_flower] [ 438.995650] fl_change+0x11a4/0x13c0 [cls_flower] [ 438.996105] tc_new_tfilter+0x347/0xbc0 [ 438.996503] ? __ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: dm btree remove: assign new_root only when removal succeeds remove_raw() in dm_btree_remove() may fail due to IO read error (e.g. read the content of origin block fails during shadowing), and the value of shadow_spine::root is uninitialized, but the uninitialized value is still assign to new_root in the end of dm_btree_remove(). For dm-thin, the value of pmd->details_root or pmd->root will become an uninitialized value, so if trying to read details_info tree again out-of-bound memory may occur as showed below: general protection fault, probably for non-canonical address 0x3fdcb14c8d7520 CPU: 4 PID: 515 Comm: dmsetup Not tainted 5.13.0-rc6 Hardware name: QEMU Standard PC RIP: 0010:metadata_ll_load_ie+0x14/0x30 Call Trace: sm_metadata_count_is_more_than_one+0xb9/0xe0 dm_tm_shadow_block+0x52/0x1c0 shadow_step+0x59/0xf0 remove_raw+0xb2/0x170 dm_btree_remove+0xf4/0x1c0 dm_pool_delete_thin_device+0xc3/0x140 pool_message+0x218/0x2b0 target_message+0x251/0x290 ctl_ioctl+0x1c4/0x4d0 dm_ctl_ioctl+0xe/0x20 __x64_sys_ioctl+0x7b/0xb0 do_syscall_64+0x40/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixing it by only assign new_root when removal succeeds

In the Linux kernel, the following vulnerability has been resolved: NFC: st21nfca: Fix memory leak in device probe and remove 'phy->pending_skb' is alloced when device probe, but forgot to free in the error handling path and remove path, this cause memory leak as follows: unreferenced object 0xffff88800bc06800 (size 512): comm "8", pid 11775, jiffies 4295159829 (age 9.032s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d66c09ce>] __kmalloc_node_track_caller+0x1ed/0x450 [<00000000c93382b3>] kmalloc_reserve+0x37/0xd0 [<000000005fea522c>] __alloc_skb+0x124/0x380 [<0000000019f29f9a>] st21nfca_hci_i2c_probe+0x170/0x8f2 Fix it by freeing 'pending_skb' in error and remove.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix memory leak in mlx5_core_destroy_cq() error path Prior to this patch in case mlx5_core_destroy_cq() failed it returns without completing all destroy operations and that leads to memory leak. Instead, complete the destroy flow before return error. Also move mlx5_debug_cq_remove() to the beginning of mlx5_core_destroy_cq() to be symmetrical with mlx5_core_create_cq(). kmemleak complains on: unreferenced object 0xc000000038625100 (size 64): comm "ethtool", pid 28301, jiffies 4298062946 (age 785.380s) hex dump (first 32 bytes): 60 01 48 94 00 00 00 c0 b8 05 34 c3 00 00 00 c0 `.H.......4..... 02 00 00 00 00 00 00 00 00 db 7d c1 00 00 00 c0 ..........}..... backtrace: [<000000009e8643cb>] add_res_tree+0xd0/0x270 [mlx5_core] [<00000000e7cb8e6c>] mlx5_debug_cq_add+0x5c/0xc0 [mlx5_core] [<000000002a12918f>] mlx5_core_create_cq+0x1d0/0x2d0 [mlx5_core] [<00000000cef0a696>] mlx5e_create_cq+0x210/0x3f0 [mlx5_core] [<000000009c642c26>] mlx5e_open_cq+0xb4/0x130 [mlx5_core] [<0000000058dfa578>] mlx5e_ptp_open+0x7f4/0xe10 [mlx5_core] [<0000000081839561>] mlx5e_open_channels+0x9cc/0x13e0 [mlx5_core] [<0000000009cf05d4>] mlx5e_switch_priv_channels+0xa4/0x230 [mlx5_core] [<0000000042bbedd8>] mlx5e_safe_switch_params+0x14c/0x300 [mlx5_core] [<0000000004bc9db8>] set_pflag_tx_port_ts+0x9c/0x160 [mlx5_core] [<00000000a0553443>] mlx5e_set_priv_flags+0xd0/0x1b0 [mlx5_core] [<00000000a8f3d84b>] ethnl_set_privflags+0x234/0x2d0 [<00000000fd27f27c>] genl_family_rcv_msg_doit+0x108/0x1d0 [<00000000f495e2bb>] genl_family_rcv_msg+0xe4/0x1f0 [<00000000646c5c2c>] genl_rcv_msg+0x78/0x120 [<00000000d53e384e>] netlink_rcv_skb+0x74/0x1a0

In the Linux kernel, the following vulnerability has been resolved: ice: fix vsi->txq_map sizing The approach of having XDP queue per CPU regardless of user's setting exposed a hidden bug that could occur in case when Rx queue count differ from Tx queue count. Currently vsi->txq_map's size is equal to the doubled vsi->alloc_txq, which is not correct due to the fact that XDP rings were previously based on the Rx queue count. Below splat can be seen when ethtool -L is used and XDP rings are configured: [ 682.875339] BUG: kernel NULL pointer dereference, address: 000000000000000f [ 682.883403] #PF: supervisor read access in kernel mode [ 682.889345] #PF: error_code(0x0000) - not-present page [ 682.895289] PGD 0 P4D 0 [ 682.898218] Oops: 0000 [#1] PREEMPT SMP PTI [ 682.903055] CPU: 42 PID: 2878 Comm: ethtool Tainted: G OE 5.15.0-rc5+ #1 [ 682.912214] Hardware name: Intel Corp. GRANTLEY/GRANTLEY, BIOS GRRFCRB1.86B.0276.D07.1605190235 05/19/2016 [ 682.923380] RIP: 0010:devres_remove+0x44/0x130 [ 682.928527] Code: 49 89 f4 55 48 89 fd 4c 89 ff 53 48 83 ec 10 e8 92 b9 49 00 48 8b 9d a8 02 00 00 48 8d 8d a0 02 00 00 49 89 c2 48 39 cb 74 0f <4c> 3b 63 10 74 25 48 8b 5b 08 48 39 cb 75 f1 4c 89 ff 4c 89 d6 e8 [ 682.950237] RSP: 0018:ffffc90006a679f0 EFLAGS: 00010002 [ 682.956285] RAX: 0000000000000286 RBX: ffffffffffffffff RCX: ffff88908343a370 [ 682.964538] RDX: 0000000000000001 RSI: ffffffff81690d60 RDI: 0000000000000000 [ 682.972789] RBP: ffff88908343a0d0 R08: 0000000000000000 R09: 0000000000000000 [ 682.981040] R10: 0000000000000286 R11: 3fffffffffffffff R12: ffffffff81690d60 [ 682.989282] R13: ffffffff81690a00 R14: ffff8890819807a8 R15: ffff88908343a36c [ 682.997535] FS: 00007f08c7bfa740(0000) GS:ffff88a03fd00000(0000) knlGS:0000000000000000 [ 683.006910] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 683.013557] CR2: 000000000000000f CR3: 0000001080a66003 CR4: 00000000003706e0 [ 683.021819] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 683.030075] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 683.038336] Call Trace: [ 683.041167] devm_kfree+0x33/0x50 [ 683.045004] ice_vsi_free_arrays+0x5e/0xc0 [ice] [ 683.050380] ice_vsi_rebuild+0x4c8/0x750 [ice] [ 683.055543] ice_vsi_recfg_qs+0x9a/0x110 [ice] [ 683.060697] ice_set_channels+0x14f/0x290 [ice] [ 683.065962] ethnl_set_channels+0x333/0x3f0 [ 683.070807] genl_family_rcv_msg_doit+0xea/0x150 [ 683.076152] genl_rcv_msg+0xde/0x1d0 [ 683.080289] ? channels_prepare_data+0x60/0x60 [ 683.085432] ? genl_get_cmd+0xd0/0xd0 [ 683.089667] netlink_rcv_skb+0x50/0xf0 [ 683.094006] genl_rcv+0x24/0x40 [ 683.097638] netlink_unicast+0x239/0x340 [ 683.102177] netlink_sendmsg+0x22e/0x470 [ 683.106717] sock_sendmsg+0x5e/0x60 [ 683.110756] __sys_sendto+0xee/0x150 [ 683.114894] ? handle_mm_fault+0xd0/0x2a0 [ 683.119535] ? do_user_addr_fault+0x1f3/0x690 [ 683.134173] __x64_sys_sendto+0x25/0x30 [ 683.148231] do_syscall_64+0x3b/0xc0 [ 683.161992] entry_SYSCALL_64_after_hwframe+0x44/0xae Fix this by taking into account the value that num_possible_cpus() yields in addition to vsi->alloc_txq instead of doubling the latter.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Update intermediate power state for SI Update the current state as boot state during dpm initialization. During the subsequent initialization, set_power_state gets called to transition to the final power state. set_power_state refers to values from the current state and without current state populated, it could result in NULL pointer dereference. For ex: on platforms where PCI speed change is supported through ACPI ATCS method, the link speed of current state needs to be queried before deciding on changing to final power state's link speed. The logic to query ATCS-support was broken on certain platforms. The issue became visible when broken ATCS-support logic got fixed with commit f9b7f3703ff9 ("drm/amdgpu/acpi: make ATPX/ATCS structures global (v2)"). Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1698

In the Linux kernel, the following vulnerability has been resolved: ACPI: scan: Fix a memory leak in an error handling path If 'acpi_device_set_name()' fails, we must free 'acpi_device_bus_id->bus_id' or there is a (potential) memory leak.

In the Linux kernel, the following vulnerability has been resolved: uio_hv_generic: Fix a memory leak in error handling paths If 'vmbus_establish_gpadl()' fails, the (recv|send)_gpadl will not be updated and 'hv_uio_cleanup()' in the error handling path will not be able to free the corresponding buffer. In such a case, we need to free the buffer explicitly.

In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3: Do not enable irqs when handling spurious interrups We triggered the following error while running our 4.19 kernel with the pseudo-NMI patches backported to it: [ 14.816231] ------------[ cut here ]------------ [ 14.816231] kernel BUG at irq.c:99! [ 14.816232] Internal error: Oops - BUG: 0 [#1] SMP [ 14.816232] Process swapper/0 (pid: 0, stack limit = 0x(____ptrval____)) [ 14.816233] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 4.19.95.aarch64 #14 [ 14.816233] Hardware name: evb (DT) [ 14.816234] pstate: 80400085 (Nzcv daIf +PAN -UAO) [ 14.816234] pc : asm_nmi_enter+0x94/0x98 [ 14.816235] lr : asm_nmi_enter+0x18/0x98 [ 14.816235] sp : ffff000008003c50 [ 14.816235] pmr_save: 00000070 [ 14.816237] x29: ffff000008003c50 x28: ffff0000095f56c0 [ 14.816238] x27: 0000000000000000 x26: ffff000008004000 [ 14.816239] x25: 00000000015e0000 x24: ffff8008fb916000 [ 14.816240] x23: 0000000020400005 x22: ffff0000080817cc [ 14.816241] x21: ffff000008003da0 x20: 0000000000000060 [ 14.816242] x19: 00000000000003ff x18: ffffffffffffffff [ 14.816243] x17: 0000000000000008 x16: 003d090000000000 [ 14.816244] x15: ffff0000095ea6c8 x14: ffff8008fff5ab40 [ 14.816244] x13: ffff8008fff58b9d x12: 0000000000000000 [ 14.816245] x11: ffff000008c8a200 x10: 000000008e31fca5 [ 14.816246] x9 : ffff000008c8a208 x8 : 000000000000000f [ 14.816247] x7 : 0000000000000004 x6 : ffff8008fff58b9e [ 14.816248] x5 : 0000000000000000 x4 : 0000000080000000 [ 14.816249] x3 : 0000000000000000 x2 : 0000000080000000 [ 14.816250] x1 : 0000000000120000 x0 : ffff0000095f56c0 [ 14.816251] Call trace: [ 14.816251] asm_nmi_enter+0x94/0x98 [ 14.816251] el1_irq+0x8c/0x180 (IRQ C) [ 14.816252] gic_handle_irq+0xbc/0x2e4 [ 14.816252] el1_irq+0xcc/0x180 (IRQ B) [ 14.816253] arch_timer_handler_virt+0x38/0x58 [ 14.816253] handle_percpu_devid_irq+0x90/0x240 [ 14.816253] generic_handle_irq+0x34/0x50 [ 14.816254] __handle_domain_irq+0x68/0xc0 [ 14.816254] gic_handle_irq+0xf8/0x2e4 [ 14.816255] el1_irq+0xcc/0x180 (IRQ A) [ 14.816255] arch_cpu_idle+0x34/0x1c8 [ 14.816255] default_idle_call+0x24/0x44 [ 14.816256] do_idle+0x1d0/0x2c8 [ 14.816256] cpu_startup_entry+0x28/0x30 [ 14.816256] rest_init+0xb8/0xc8 [ 14.816257] start_kernel+0x4c8/0x4f4 [ 14.816257] Code: 940587f1 d5384100 b9401001 36a7fd01 (d4210000) [ 14.816258] Modules linked in: start_dp(O) smeth(O) [ 15.103092] ---[ end trace 701753956cb14aa8 ]--- [ 15.103093] Kernel panic - not syncing: Fatal exception in interrupt [ 15.103099] SMP: stopping secondary CPUs [ 15.103100] Kernel Offset: disabled [ 15.103100] CPU features: 0x36,a2400218 [ 15.103100] Memory Limit: none which is cause by a 'BUG_ON(in_nmi())' in nmi_enter(). From the call trace, we can find three interrupts (noted A, B, C above): interrupt (A) is preempted by (B), which is further interrupted by (C). Subsequent investigations show that (B) results in nmi_enter() being called, but that it actually is a spurious interrupt. Furthermore, interrupts are reenabled in the context of (B), and (C) fires with NMI priority. We end-up with a nested NMI situation, something we definitely do not want to (and cannot) handle. The bug here is that spurious interrupts should never result in any state change, and we should just return to the interrupted context. Moving the handling of spurious interrupts as early as possible in the GICv3 handler fixes this issue. [maz: rewrote commit message, corrected Fixes: tag]

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: nullify cq->dbg pointer in mlx5_debug_cq_remove() Prior to this patch in case mlx5_core_destroy_cq() failed it proceeds to rest of destroy operations. mlx5_core_destroy_cq() could be called again by user and cause additional call of mlx5_debug_cq_remove(). cq->dbg was not nullify in previous call and cause the crash. Fix it by nullify cq->dbg pointer after removal. Also proceed to destroy operations only if FW return 0 for MLX5_CMD_OP_DESTROY_CQ command. general protection fault, probably for non-canonical address 0x2000300004058: 0000 [#1] SMP PTI CPU: 5 PID: 1228 Comm: python Not tainted 5.15.0-rc5_for_upstream_min_debug_2021_10_14_11_06 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:lockref_get+0x1/0x60 Code: 5d e9 53 ff ff ff 48 8d 7f 70 e8 0a 2e 48 00 c7 85 d0 00 00 00 02 00 00 00 c6 45 70 00 fb 5d c3 c3 cc cc cc cc cc cc cc cc 53 <48> 8b 17 48 89 fb 85 d2 75 3d 48 89 d0 bf 64 00 00 00 48 89 c1 48 RSP: 0018:ffff888137dd7a38 EFLAGS: 00010206 RAX: 0000000000000000 RBX: ffff888107d5f458 RCX: 00000000fffffffe RDX: 000000000002c2b0 RSI: ffffffff8155e2e0 RDI: 0002000300004058 RBP: ffff888137dd7a88 R08: 0002000300004058 R09: ffff8881144a9f88 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881141d4000 R13: ffff888137dd7c68 R14: ffff888137dd7d58 R15: ffff888137dd7cc0 FS: 00007f4644f2a4c0(0000) GS:ffff8887a2d40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055b4500f4380 CR3: 0000000114f7a003 CR4: 0000000000170ea0 Call Trace: simple_recursive_removal+0x33/0x2e0 ? debugfs_remove+0x60/0x60 debugfs_remove+0x40/0x60 mlx5_debug_cq_remove+0x32/0x70 [mlx5_core] mlx5_core_destroy_cq+0x41/0x1d0 [mlx5_core] devx_obj_cleanup+0x151/0x330 [mlx5_ib] ? __pollwait+0xd0/0xd0 ? xas_load+0x5/0x70 ? xa_load+0x62/0xa0 destroy_hw_idr_uobject+0x20/0x80 [ib_uverbs] uverbs_destroy_uobject+0x3b/0x360 [ib_uverbs] uobj_destroy+0x54/0xa0 [ib_uverbs] ib_uverbs_cmd_verbs+0xaf2/0x1160 [ib_uverbs] ? uverbs_finalize_object+0xd0/0xd0 [ib_uverbs] ib_uverbs_ioctl+0xc4/0x1b0 [ib_uverbs] __x64_sys_ioctl+0x3e4/0x8e0

In the Linux kernel, the following vulnerability has been resolved: usb: mtu3: fix list_head check warning This is caused by uninitialization of list_head. BUG: KASAN: use-after-free in __list_del_entry_valid+0x34/0xe4 Call trace: dump_backtrace+0x0/0x298 show_stack+0x24/0x34 dump_stack+0x130/0x1a8 print_address_description+0x88/0x56c __kasan_report+0x1b8/0x2a0 kasan_report+0x14/0x20 __asan_load8+0x9c/0xa0 __list_del_entry_valid+0x34/0xe4 mtu3_req_complete+0x4c/0x300 [mtu3] mtu3_gadget_stop+0x168/0x448 [mtu3] usb_gadget_unregister_driver+0x204/0x3a0 unregister_gadget_item+0x44/0xa4

In the Linux kernel, the following vulnerability has been resolved: powerpc/64: Fix the definition of the fixmap area At the time being, the fixmap area is defined at the top of the address space or just below KASAN. This definition is not valid for PPC64. For PPC64, use the top of the I/O space. Because of circular dependencies, it is not possible to include asm/fixmap.h in asm/book3s/64/pgtable.h , so define a fixed size AREA at the top of the I/O space for fixmap and ensure during build that the size is big enough.

In the Linux kernel, the following vulnerability has been resolved: ipmi: Fix UAF when uninstall ipmi_si and ipmi_msghandler module Hi, When testing install and uninstall of ipmi_si.ko and ipmi_msghandler.ko, the system crashed. The log as follows: [ 141.087026] BUG: unable to handle kernel paging request at ffffffffc09b3a5a [ 141.087241] PGD 8fe4c0d067 P4D 8fe4c0d067 PUD 8fe4c0f067 PMD 103ad89067 PTE 0 [ 141.087464] Oops: 0010 [#1] SMP NOPTI [ 141.087580] CPU: 67 PID: 668 Comm: kworker/67:1 Kdump: loaded Not tainted 4.18.0.x86_64 #47 [ 141.088009] Workqueue: events 0xffffffffc09b3a40 [ 141.088009] RIP: 0010:0xffffffffc09b3a5a [ 141.088009] Code: Bad RIP value. [ 141.088009] RSP: 0018:ffffb9094e2c3e88 EFLAGS: 00010246 [ 141.088009] RAX: 0000000000000000 RBX: ffff9abfdb1f04a0 RCX: 0000000000000000 [ 141.088009] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 [ 141.088009] RBP: 0000000000000000 R08: ffff9abfffee3cb8 R09: 00000000000002e1 [ 141.088009] R10: ffffb9094cb73d90 R11: 00000000000f4240 R12: ffff9abfffee8700 [ 141.088009] R13: 0000000000000000 R14: ffff9abfdb1f04a0 R15: ffff9abfdb1f04a8 [ 141.088009] FS: 0000000000000000(0000) GS:ffff9abfffec0000(0000) knlGS:0000000000000000 [ 141.088009] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 141.088009] CR2: ffffffffc09b3a30 CR3: 0000008fe4c0a001 CR4: 00000000007606e0 [ 141.088009] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 141.088009] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 141.088009] PKRU: 55555554 [ 141.088009] Call Trace: [ 141.088009] ? process_one_work+0x195/0x390 [ 141.088009] ? worker_thread+0x30/0x390 [ 141.088009] ? process_one_work+0x390/0x390 [ 141.088009] ? kthread+0x10d/0x130 [ 141.088009] ? kthread_flush_work_fn+0x10/0x10 [ 141.088009] ? ret_from_fork+0x35/0x40] BUG: unable to handle kernel paging request at ffffffffc0b28a5a [ 200.223240] PGD 97fe00d067 P4D 97fe00d067 PUD 97fe00f067 PMD a580cbf067 PTE 0 [ 200.223464] Oops: 0010 [#1] SMP NOPTI [ 200.223579] CPU: 63 PID: 664 Comm: kworker/63:1 Kdump: loaded Not tainted 4.18.0.x86_64 #46 [ 200.224008] Workqueue: events 0xffffffffc0b28a40 [ 200.224008] RIP: 0010:0xffffffffc0b28a5a [ 200.224008] Code: Bad RIP value. [ 200.224008] RSP: 0018:ffffbf3c8e2a3e88 EFLAGS: 00010246 [ 200.224008] RAX: 0000000000000000 RBX: ffffa0799ad6bca0 RCX: 0000000000000000 [ 200.224008] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 [ 200.224008] RBP: 0000000000000000 R08: ffff9fe43fde3cb8 R09: 00000000000000d5 [ 200.224008] R10: ffffbf3c8cb53d90 R11: 00000000000f4240 R12: ffff9fe43fde8700 [ 200.224008] R13: 0000000000000000 R14: ffffa0799ad6bca0 R15: ffffa0799ad6bca8 [ 200.224008] FS: 0000000000000000(0000) GS:ffff9fe43fdc0000(0000) knlGS:0000000000000000 [ 200.224008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 200.224008] CR2: ffffffffc0b28a30 CR3: 00000097fe00a002 CR4: 00000000007606e0 [ 200.224008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 200.224008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 200.224008] PKRU: 55555554 [ 200.224008] Call Trace: [ 200.224008] ? process_one_work+0x195/0x390 [ 200.224008] ? worker_thread+0x30/0x390 [ 200.224008] ? process_one_work+0x390/0x390 [ 200.224008] ? kthread+0x10d/0x130 [ 200.224008] ? kthread_flush_work_fn+0x10/0x10 [ 200.224008] ? ret_from_fork+0x35/0x40 [ 200.224008] kernel fault(0x1) notification starting on CPU 63 [ 200.224008] kernel fault(0x1) notification finished on CPU 63 [ 200.224008] CR2: ffffffffc0b28a5a [ 200.224008] ---[ end trace c82a412d93f57412 ]--- The reason is as follows: T1: rmmod ipmi_si. ->ipmi_unregister_smi() -> ipmi_bmc_unregister() -> __ipmi_bmc_unregister() -> kref_put(&bmc->usecount, cleanup_bmc_device); -> schedule_work(&bmc->remove_work); T2: rmmod ipmi_msghandl ---truncated---

In the Linux kernel, the following vulnerability has been resolved: sched/fair: Prevent dead task groups from regaining cfs_rq's Kevin is reporting crashes which point to a use-after-free of a cfs_rq in update_blocked_averages(). Initial debugging revealed that we've live cfs_rq's (on_list=1) in an about to be kfree()'d task group in free_fair_sched_group(). However, it was unclear how that can happen. His kernel config happened to lead to a layout of struct sched_entity that put the 'my_q' member directly into the middle of the object which makes it incidentally overlap with SLUB's freelist pointer. That, in combination with SLAB_FREELIST_HARDENED's freelist pointer mangling, leads to a reliable access violation in form of a #GP which made the UAF fail fast. Michal seems to have run into the same issue[1]. He already correctly diagnosed that commit a7b359fc6a37 ("sched/fair: Correctly insert cfs_rq's to list on unthrottle") is causing the preconditions for the UAF to happen by re-adding cfs_rq's also to task groups that have no more running tasks, i.e. also to dead ones. His analysis, however, misses the real root cause and it cannot be seen from the crash backtrace only, as the real offender is tg_unthrottle_up() getting called via sched_cfs_period_timer() via the timer interrupt at an inconvenient time. When unregister_fair_sched_group() unlinks all cfs_rq's from the dying task group, it doesn't protect itself from getting interrupted. If the timer interrupt triggers while we iterate over all CPUs or after unregister_fair_sched_group() has finished but prior to unlinking the task group, sched_cfs_period_timer() will execute and walk the list of task groups, trying to unthrottle cfs_rq's, i.e. re-add them to the dying task group. These will later -- in free_fair_sched_group() -- be kfree()'ed while still being linked, leading to the fireworks Kevin and Michal are seeing. To fix this race, ensure the dying task group gets unlinked first. However, simply switching the order of unregistering and unlinking the task group isn't sufficient, as concurrent RCU walkers might still see it, as can be seen below: CPU1: CPU2: : timer IRQ: : do_sched_cfs_period_timer(): : : : distribute_cfs_runtime(): : rcu_read_lock(); : : : unthrottle_cfs_rq(): sched_offline_group(): : : walk_tg_tree_from(…,tg_unthrottle_up,…): list_del_rcu(&tg->list); : (1) : list_for_each_entry_rcu(child, &parent->children, siblings) : : (2) list_del_rcu(&tg->siblings); : : tg_unthrottle_up(): unregister_fair_sched_group(): struct cfs_rq *cfs_rq = tg->cfs_rq[cpu_of(rq)]; : : list_del_leaf_cfs_rq(tg->cfs_rq[cpu]); : : : : if (!cfs_rq_is_decayed(cfs_rq) || cfs_rq->nr_running) (3) : list_add_leaf_cfs_rq(cfs_rq); : : : : : : : : : ---truncated---

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Remove WO permissions on second-level paging entries When the first level page table is used for IOVA translation, it only supports Read-Only and Read-Write permissions. The Write-Only permission is not supported as the PRESENT bit (implying Read permission) should always set. When using second level, we still give separate permissions that allows WriteOnly which seems inconsistent and awkward. We want to have consistent behavior. After moving to 1st level, we don't want things to work sometimes, and break if we use 2nd level for the same mappings. Hence remove this configuration.

In the Linux kernel, the following vulnerability has been resolved: mac80211: fix deadlock in AP/VLAN handling Syzbot reports that when you have AP_VLAN interfaces that are up and close the AP interface they belong to, we get a deadlock. No surprise - since we dev_close() them with the wiphy mutex held, which goes back into the netdev notifier in cfg80211 and tries to acquire the wiphy mutex there. To fix this, we need to do two things: 1) prevent changing iftype while AP_VLANs are up, we can't easily fix this case since cfg80211 already calls us with the wiphy mutex held, but change_interface() is relatively rare in drivers anyway, so changing iftype isn't used much (and userspace has to fall back to down/change/up anyway) 2) pull the dev_close() loop over VLANs out of the wiphy mutex section in the normal stop case

In the Linux kernel, the following vulnerability has been resolved: userfaultfd: release page in error path to avoid BUG_ON Consider the following sequence of events: 1. Userspace issues a UFFD ioctl, which ends up calling into shmem_mfill_atomic_pte(). We successfully account the blocks, we shmem_alloc_page(), but then the copy_from_user() fails. We return -ENOENT. We don't release the page we allocated. 2. Our caller detects this error code, tries the copy_from_user() after dropping the mmap_lock, and retries, calling back into shmem_mfill_atomic_pte(). 3. Meanwhile, let's say another process filled up the tmpfs being used. 4. So shmem_mfill_atomic_pte() fails to account blocks this time, and immediately returns - without releasing the page. This triggers a BUG_ON in our caller, which asserts that the page should always be consumed, unless -ENOENT is returned. To fix this, detect if we have such a "dangling" page when accounting fails, and if so, release it before returning.

In the Linux kernel, the following vulnerability has been resolved: USB: usbfs: Don't WARN about excessively large memory allocations Syzbot found that the kernel generates a WARNing if the user tries to submit a bulk transfer through usbfs with a buffer that is way too large. This isn't a bug in the kernel; it's merely an invalid request from the user and the usbfs code does handle it correctly. In theory the same thing can happen with async transfers, or with the packet descriptor table for isochronous transfers. To prevent the MM subsystem from complaining about these bad allocation requests, add the __GFP_NOWARN flag to the kmalloc calls for these buffers.

In the Linux kernel, the following vulnerability has been resolved: serial: liteuart: Fix NULL pointer dereference in ->remove() drvdata has to be set in _probe() - otherwise platform_get_drvdata() causes null pointer dereference BUG in _remove().

In the Linux kernel, the following vulnerability has been resolved: phy: phy-mtk-tphy: Fix some resource leaks in mtk_phy_init() Use clk_disable_unprepare() in the error path of mtk_phy_init() to fix some resource leaks.

In the Linux kernel, the following vulnerability has been resolved: net: bridge: fix vlan tunnel dst null pointer dereference This patch fixes a tunnel_dst null pointer dereference due to lockless access in the tunnel egress path. When deleting a vlan tunnel the tunnel_dst pointer is set to NULL without waiting a grace period (i.e. while it's still usable) and packets egressing are dereferencing it without checking. Use READ/WRITE_ONCE to annotate the lockless use of tunnel_id, use RCU for accessing tunnel_dst and make sure it is read only once and checked in the egress path. The dst is already properly RCU protected so we don't need to do anything fancy than to make sure tunnel_id and tunnel_dst are read only once and checked in the egress path.

In the Linux kernel, the following vulnerability has been resolved: ARM: davinci: da850-evm: Avoid NULL pointer dereference With newer versions of GCC, there is a panic in da850_evm_config_emac() when booting multi_v5_defconfig in QEMU under the palmetto-bmc machine: Unable to handle kernel NULL pointer dereference at virtual address 00000020 pgd = (ptrval) [00000020] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 5.15.0 #1 Hardware name: Generic DT based system PC is at da850_evm_config_emac+0x1c/0x120 LR is at do_one_initcall+0x50/0x1e0 The emac_pdata pointer in soc_info is NULL because davinci_soc_info only gets populated on davinci machines but da850_evm_config_emac() is called on all machines via device_initcall(). Move the rmii_en assignment below the machine check so that it is only dereferenced when running on a supported SoC.

In the Linux kernel, the following vulnerability has been resolved: net: caif: fix memory leak in caif_device_notify In case of caif_enroll_dev() fail, allocated link_support won't be assigned to the corresponding structure. So simply free allocated pointer in case of error

In the Linux kernel, the following vulnerability has been resolved: media: v4l2-core: explicitly clear ioctl input data As seen from a recent syzbot bug report, mistakes in the compat ioctl implementation can lead to uninitialized kernel stack data getting used as input for driver ioctl handlers. The reported bug is now fixed, but it's possible that other related bugs are still present or get added in the future. As the drivers need to check user input already, the possible impact is fairly low, but it might still cause an information leak. To be on the safe side, always clear the entire ioctl buffer before calling the conversion handler functions that are meant to initialize them.

In the Linux kernel, the following vulnerability has been resolved: iio: accel: kxcjk-1013: Fix possible memory leak in probe and remove When ACPI type is ACPI_SMO8500, the data->dready_trig will not be set, the memory allocated by iio_triggered_buffer_setup() will not be freed, and cause memory leak as follows: unreferenced object 0xffff888009551400 (size 512): comm "i2c-SMO8500-125", pid 911, jiffies 4294911787 (age 83.852s) hex dump (first 32 bytes): 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 20 e2 e5 c0 ff ff ff ff ........ ....... backtrace: [<0000000041ce75ee>] kmem_cache_alloc_trace+0x16d/0x360 [<000000000aeb17b0>] iio_kfifo_allocate+0x41/0x130 [kfifo_buf] [<000000004b40c1f5>] iio_triggered_buffer_setup_ext+0x2c/0x210 [industrialio_triggered_buffer] [<000000004375b15f>] kxcjk1013_probe+0x10c3/0x1d81 [kxcjk_1013] Fix it by remove data->dready_trig condition in probe and remove.

In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Fix a memleak bug in rvu_mbox_init() In rvu_mbox_init(), mbox_regions is not freed or passed out under the switch-default region, which could lead to a memory leak. Fix this bug by changing 'return err' to 'goto free_regions'. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_OCTEONTX2_AF=y show no new warnings, and our static analyzer no longer warns about this code.

In the Linux kernel, the following vulnerability has been resolved: net: caif: fix memory leak in cfusbl_device_notify In case of caif_enroll_dev() fail, allocated link_support won't be assigned to the corresponding structure. So simply free allocated pointer in case of error.

In the Linux kernel, the following vulnerability has been resolved: media: staging/intel-ipu3: Fix memory leak in imu_fmt We are losing the reference to an allocated memory if try. Change the order of the check to avoid that.

In the Linux kernel, the following vulnerability has been resolved: can: m_can: m_can_read_fifo: fix memory leak in error branch In m_can_read_fifo(), if the second call to m_can_fifo_read() fails, the function jump to the out_fail label and returns without calling m_can_receive_skb(). This means that the skb previously allocated by alloc_can_skb() is not freed. In other terms, this is a memory leak. This patch adds a goto label to destroy the skb if an error occurs. Issue was found with GCC -fanalyzer, please follow the link below for details.

In the Linux kernel, the following vulnerability has been resolved: gve: Add NULL pointer checks when freeing irqs. When freeing notification blocks, we index priv->msix_vectors. If we failed to allocate priv->msix_vectors (see abort_with_msix_vectors) this could lead to a NULL pointer dereference if the driver is unloaded.

In the Linux kernel, the following vulnerability has been resolved: spi: spi-zynqmp-gqspi: return -ENOMEM if dma_map_single fails The spi controller supports 44-bit address space on AXI in DMA mode, so set dma_addr_t width to 44-bit to avoid using a swiotlb mapping. In addition, if dma_map_single fails, it should return immediately instead of continuing doing the DMA operation which bases on invalid address. This fixes the following crash which occurs in reading a big block from flash: [ 123.633577] zynqmp-qspi ff0f0000.spi: swiotlb buffer is full (sz: 4194304 bytes), total 32768 (slots), used 0 (slots) [ 123.644230] zynqmp-qspi ff0f0000.spi: ERR:rxdma:memory not mapped [ 123.784625] Unable to handle kernel paging request at virtual address 00000000003fffc0 [ 123.792536] Mem abort info: [ 123.795313] ESR = 0x96000145 [ 123.798351] EC = 0x25: DABT (current EL), IL = 32 bits [ 123.803655] SET = 0, FnV = 0 [ 123.806693] EA = 0, S1PTW = 0 [ 123.809818] Data abort info: [ 123.812683] ISV = 0, ISS = 0x00000145 [ 123.816503] CM = 1, WnR = 1 [ 123.819455] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000805047000 [ 123.825887] [00000000003fffc0] pgd=0000000803b45003, p4d=0000000803b45003, pud=0000000000000000 [ 123.834586] Internal error: Oops: 96000145 [#1] PREEMPT SMP

In the Linux kernel, the following vulnerability has been resolved: mm/slub: actually fix freelist pointer vs redzoning It turns out that SLUB redzoning ("slub_debug=Z") checks from s->object_size rather than from s->inuse (which is normally bumped to make room for the freelist pointer), so a cache created with an object size less than 24 would have the freelist pointer written beyond s->object_size, causing the redzone to be corrupted by the freelist pointer. This was very visible with "slub_debug=ZF": BUG test (Tainted: G B ): Right Redzone overwritten ----------------------------------------------------------------------------- INFO: 0xffff957ead1c05de-0xffff957ead1c05df @offset=1502. First byte 0x1a instead of 0xbb INFO: Slab 0xffffef3950b47000 objects=170 used=170 fp=0x0000000000000000 flags=0x8000000000000200 INFO: Object 0xffff957ead1c05d8 @offset=1496 fp=0xffff957ead1c0620 Redzone (____ptrval____): bb bb bb bb bb bb bb bb ........ Object (____ptrval____): 00 00 00 00 00 f6 f4 a5 ........ Redzone (____ptrval____): 40 1d e8 1a aa @.... Padding (____ptrval____): 00 00 00 00 00 00 00 00 ........ Adjust the offset to stay within s->object_size. (Note that no caches of in this size range are known to exist in the kernel currently.)