The Windows installer for PostgreSQL 9.5 - 12 invokes system-provided executables that do not have fully-qualified paths. Executables in the directory where the installer loads or the current working directory take precedence over the intended executables. An attacker having permission to add files into one of those directories can use this to execute arbitrary code with the installer's administrative rights.

log.c in Squid Analysis Report Generator (sarg) through 2.3.11 allows local privilege escalation. By default, it uses a fixed temporary directory /tmp/sarg. As the root user, sarg creates this directory or reuses an existing one in an insecure manner. An attacker can pre-create the directory, and place symlinks in it (after winning a /tmp/sarg/denied.int_unsort race condition). The outcome will be corrupted or newly created files in privileged file system locations.

An issue was discovered in Xen through 4.11.x allowing x86 PV guest OS users to cause a denial of service or gain privileges by leveraging a race condition that arose when XENMEM_exchange was introduced.

OpenSC before 0.20.0-rc1 has an out-of-bounds access of an ASN.1 Octet string in asn1_decode_entry in libopensc/asn1.c.

When Apache Tomcat 9.0.0.M1 to 9.0.28, 8.5.0 to 8.5.47, 7.0.0 and 7.0.97 is configured with the JMX Remote Lifecycle Listener, a local attacker without access to the Tomcat process or configuration files is able to manipulate the RMI registry to perform a man-in-the-middle attack to capture user names and passwords used to access the JMX interface. The attacker can then use these credentials to access the JMX interface and gain complete control over the Tomcat instance.

A use-after-free exists in drivers/tee/tee_shm.c in the TEE subsystem in the Linux kernel through 5.15.11. This occurs because of a race condition in tee_shm_get_from_id during an attempt to free a shared memory object.

screenresolution-mechanism in screen-resolution-extra 0.17.2 does not properly use the PolicyKit D-Bus API, which allows local users to bypass intended access restrictions by leveraging a race condition via a setuid or pkexec process that is mishandled in a PolicyKitService._check_permission call.

The fix for CVE-2020-9484 was incomplete. When using Apache Tomcat 10.0.0-M1 to 10.0.0, 9.0.0.M1 to 9.0.41, 8.5.0 to 8.5.61 or 7.0.0. to 7.0.107 with a configuration edge case that was highly unlikely to be used, the Tomcat instance was still vulnerable to CVE-2020-9494. Note that both the previously published prerequisites for CVE-2020-9484 and the previously published mitigations for CVE-2020-9484 also apply to this issue.

The (1) sparc_mmap_check function in arch/sparc/kernel/sys_sparc.c and the (2) sparc64_mmap_check function in arch/sparc64/kernel/sys_sparc.c, in the Linux kernel 2.4 before 2.4.36.5 and 2.6 before 2.6.25.3, omit some virtual-address range (aka span) checks when the mmap MAP_FIXED bit is not set, which allows local users to cause a denial of service (panic) via unspecified mmap calls.

When using Apache Tomcat versions 10.0.0-M1 to 10.0.0-M4, 9.0.0.M1 to 9.0.34, 8.5.0 to 8.5.54 and 7.0.0 to 7.0.103 if a) an attacker is able to control the contents and name of a file on the server; and b) the server is configured to use the PersistenceManager with a FileStore; and c) the PersistenceManager is configured with sessionAttributeValueClassNameFilter="null" (the default unless a SecurityManager is used) or a sufficiently lax filter to allow the attacker provided object to be deserialized; and d) the attacker knows the relative file path from the storage location used by FileStore to the file the attacker has control over; then, using a specifically crafted request, the attacker will be able to trigger remote code execution via deserialization of the file under their control. Note that all of conditions a) to d) must be true for the attack to succeed.

The MOTD update script in the base-files package in Ubuntu 18.04 LTS before 10.1ubuntu2.2, and Ubuntu 18.10 before 10.1ubuntu6 incorrectly handled temporary files. A local attacker could use this issue to cause a denial of service, or possibly escalate privileges if kernel symlink restrictions were disabled.

The Linux kernel before 5.17.2 mishandles seccomp permissions. The PTRACE_SEIZE code path allows attackers to bypass intended restrictions on setting the PT_SUSPEND_SECCOMP flag.

In the Linux kernel 4.15.x through 4.19.x before 4.19.2, map_write() in kernel/user_namespace.c allows privilege escalation because it mishandles nested user namespaces with more than 5 UID or GID ranges. A user who has CAP_SYS_ADMIN in an affected user namespace can bypass access controls on resources outside the namespace, as demonstrated by reading /etc/shadow. This occurs because an ID transformation takes place properly for the namespaced-to-kernel direction but not for the kernel-to-namespaced direction.

A flaw was found in qemu Media Transfer Protocol (MTP) before version 3.1.0. A path traversal in the in usb_mtp_write_data function in hw/usb/dev-mtp.c due to an improper filename sanitization. When the guest device is mounted in read-write mode, this allows to read/write arbitrary files which may lead do DoS scenario OR possibly lead to code execution on the host.

IOMMU: RMRR (VT-d) and unity map (AMD-Vi) handling issues T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Certain PCI devices in a system might be assigned Reserved Memory Regions (specified via Reserved Memory Region Reporting, "RMRR") for Intel VT-d or Unity Mapping ranges for AMD-Vi. These are typically used for platform tasks such as legacy USB emulation. Since the precise purpose of these regions is unknown, once a device associated with such a region is active, the mappings of these regions need to remain continuouly accessible by the device. This requirement has been violated. Subsequent DMA or interrupts from the device may have unpredictable behaviour, ranging from IOMMU faults to memory corruption.

Johnathan Nightingale beep through 1.3.4, if setuid, has a race condition that allows local privilege escalation.

Linux PV device frontends vulnerable to attacks by backends T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Several Linux PV device frontends are using the grant table interfaces for removing access rights of the backends in ways being subject to race conditions, resulting in potential data leaks, data corruption by malicious backends, and denial of service triggered by malicious backends: blkfront, netfront, scsifront and the gntalloc driver are testing whether a grant reference is still in use. If this is not the case, they assume that a following removal of the granted access will always succeed, which is not true in case the backend has mapped the granted page between those two operations. As a result the backend can keep access to the memory page of the guest no matter how the page will be used after the frontend I/O has finished. The xenbus driver has a similar problem, as it doesn't check the success of removing the granted access of a shared ring buffer. blkfront: CVE-2022-23036 netfront: CVE-2022-23037 scsifront: CVE-2022-23038 gntalloc: CVE-2022-23039 xenbus: CVE-2022-23040 blkfront, netfront, scsifront, usbfront, dmabuf, xenbus, 9p, kbdfront, and pvcalls are using a functionality to delay freeing a grant reference until it is no longer in use, but the freeing of the related data page is not synchronized with dropping the granted access. As a result the backend can keep access to the memory page even after it has been freed and then re-used for a different purpose. CVE-2022-23041 netfront will fail a BUG_ON() assertion if it fails to revoke access in the rx path. This will result in a Denial of Service (DoS) situation of the guest which can be triggered by the backend. CVE-2022-23042

Linux PV device frontends vulnerable to attacks by backends T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Several Linux PV device frontends are using the grant table interfaces for removing access rights of the backends in ways being subject to race conditions, resulting in potential data leaks, data corruption by malicious backends, and denial of service triggered by malicious backends: blkfront, netfront, scsifront and the gntalloc driver are testing whether a grant reference is still in use. If this is not the case, they assume that a following removal of the granted access will always succeed, which is not true in case the backend has mapped the granted page between those two operations. As a result the backend can keep access to the memory page of the guest no matter how the page will be used after the frontend I/O has finished. The xenbus driver has a similar problem, as it doesn't check the success of removing the granted access of a shared ring buffer. blkfront: CVE-2022-23036 netfront: CVE-2022-23037 scsifront: CVE-2022-23038 gntalloc: CVE-2022-23039 xenbus: CVE-2022-23040 blkfront, netfront, scsifront, usbfront, dmabuf, xenbus, 9p, kbdfront, and pvcalls are using a functionality to delay freeing a grant reference until it is no longer in use, but the freeing of the related data page is not synchronized with dropping the granted access. As a result the backend can keep access to the memory page even after it has been freed and then re-used for a different purpose. CVE-2022-23041 netfront will fail a BUG_ON() assertion if it fails to revoke access in the rx path. This will result in a Denial of Service (DoS) situation of the guest which can be triggered by the backend. CVE-2022-23042

Linux PV device frontends vulnerable to attacks by backends T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Several Linux PV device frontends are using the grant table interfaces for removing access rights of the backends in ways being subject to race conditions, resulting in potential data leaks, data corruption by malicious backends, and denial of service triggered by malicious backends: blkfront, netfront, scsifront and the gntalloc driver are testing whether a grant reference is still in use. If this is not the case, they assume that a following removal of the granted access will always succeed, which is not true in case the backend has mapped the granted page between those two operations. As a result the backend can keep access to the memory page of the guest no matter how the page will be used after the frontend I/O has finished. The xenbus driver has a similar problem, as it doesn't check the success of removing the granted access of a shared ring buffer. blkfront: CVE-2022-23036 netfront: CVE-2022-23037 scsifront: CVE-2022-23038 gntalloc: CVE-2022-23039 xenbus: CVE-2022-23040 blkfront, netfront, scsifront, usbfront, dmabuf, xenbus, 9p, kbdfront, and pvcalls are using a functionality to delay freeing a grant reference until it is no longer in use, but the freeing of the related data page is not synchronized with dropping the granted access. As a result the backend can keep access to the memory page even after it has been freed and then re-used for a different purpose. CVE-2022-23041 netfront will fail a BUG_ON() assertion if it fails to revoke access in the rx path. This will result in a Denial of Service (DoS) situation of the guest which can be triggered by the backend. CVE-2022-23042

A race condition in the nginx module in Phusion Passenger 3.x through 5.x before 5.3.2 allows local escalation of privileges when a non-standard passenger_instance_registry_dir with insufficiently strict permissions is configured. Replacing a file with a symlink after the file was created, but before it was chowned, leads to the target of the link being chowned via the path. Targeting sensitive files such as root's crontab file allows privilege escalation.

In arch/x86/kvm/vmx.c in the Linux kernel before 4.17.2, when nested virtualization is used, local attackers could cause L1 KVM guests to VMEXIT, potentially allowing privilege escalations and denial of service attacks due to lack of checking of CPL.

Linux PV device frontends vulnerable to attacks by backends T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Several Linux PV device frontends are using the grant table interfaces for removing access rights of the backends in ways being subject to race conditions, resulting in potential data leaks, data corruption by malicious backends, and denial of service triggered by malicious backends: blkfront, netfront, scsifront and the gntalloc driver are testing whether a grant reference is still in use. If this is not the case, they assume that a following removal of the granted access will always succeed, which is not true in case the backend has mapped the granted page between those two operations. As a result the backend can keep access to the memory page of the guest no matter how the page will be used after the frontend I/O has finished. The xenbus driver has a similar problem, as it doesn't check the success of removing the granted access of a shared ring buffer. blkfront: CVE-2022-23036 netfront: CVE-2022-23037 scsifront: CVE-2022-23038 gntalloc: CVE-2022-23039 xenbus: CVE-2022-23040 blkfront, netfront, scsifront, usbfront, dmabuf, xenbus, 9p, kbdfront, and pvcalls are using a functionality to delay freeing a grant reference until it is no longer in use, but the freeing of the related data page is not synchronized with dropping the granted access. As a result the backend can keep access to the memory page even after it has been freed and then re-used for a different purpose. CVE-2022-23041 netfront will fail a BUG_ON() assertion if it fails to revoke access in the rx path. This will result in a Denial of Service (DoS) situation of the guest which can be triggered by the backend. CVE-2022-23042

A potentially exploitable crash in TransportSecurityInfo used for SSL can be triggered by data stored in the local cache in the user profile directory. This issue is only exploitable in combination with another vulnerability allowing an attacker to write data into the local cache or from locally installed malware. This issue also triggers a non-exploitable startup crash for users switching between the Nightly and Release versions of Firefox if the same profile is used. This vulnerability affects Thunderbird < 60.2.1, Firefox ESR < 60.2.1, and Firefox < 62.0.2.

Linux PV device frontends vulnerable to attacks by backends T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Several Linux PV device frontends are using the grant table interfaces for removing access rights of the backends in ways being subject to race conditions, resulting in potential data leaks, data corruption by malicious backends, and denial of service triggered by malicious backends: blkfront, netfront, scsifront and the gntalloc driver are testing whether a grant reference is still in use. If this is not the case, they assume that a following removal of the granted access will always succeed, which is not true in case the backend has mapped the granted page between those two operations. As a result the backend can keep access to the memory page of the guest no matter how the page will be used after the frontend I/O has finished. The xenbus driver has a similar problem, as it doesn't check the success of removing the granted access of a shared ring buffer. blkfront: CVE-2022-23036 netfront: CVE-2022-23037 scsifront: CVE-2022-23038 gntalloc: CVE-2022-23039 xenbus: CVE-2022-23040 blkfront, netfront, scsifront, usbfront, dmabuf, xenbus, 9p, kbdfront, and pvcalls are using a functionality to delay freeing a grant reference until it is no longer in use, but the freeing of the related data page is not synchronized with dropping the granted access. As a result the backend can keep access to the memory page even after it has been freed and then re-used for a different purpose. CVE-2022-23041 netfront will fail a BUG_ON() assertion if it fails to revoke access in the rx path. This will result in a Denial of Service (DoS) situation of the guest which can be triggered by the backend. CVE-2022-23042

procps-ng before version 3.3.15 is vulnerable to a local privilege escalation in top. If a user runs top with HOME unset in an attacker-controlled directory, the attacker could achieve privilege escalation by exploiting one of several vulnerabilities in the config_file() function.

Race condition in arch/x86/mm/tlb.c in the Linux kernel before 4.4.1 allows local users to gain privileges by triggering access to a paging structure by a different CPU.

A Race Condition Enabling Link Following vulnerability in the packaging of texlive-filesystem of SUSE Linux Enterprise Module for Desktop Applications 15-SP1, SUSE Linux Enterprise Software Development Kit 12-SP4, SUSE Linux Enterprise Software Development Kit 12-SP5; openSUSE Leap 15.1 allows local users to corrupt files or potentially escalate privileges. This issue affects: SUSE Linux Enterprise Module for Desktop Applications 15-SP1 texlive-filesystem versions prior to 2017.135-9.5.1. SUSE Linux Enterprise Software Development Kit 12-SP4 texlive-filesystem versions prior to 2013.74-16.5.1. SUSE Linux Enterprise Software Development Kit 12-SP5 texlive-filesystem versions prior to 2013.74-16.5.1. openSUSE Leap 15.1 texlive-filesystem versions prior to 2017.135-lp151.8.3.1.

The c_rehash script does not properly sanitise shell metacharacters to prevent command injection. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool. Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2). Fixed in OpenSSL 1.1.1o (Affected 1.1.1-1.1.1n). Fixed in OpenSSL 1.0.2ze (Affected 1.0.2-1.0.2zd).

A TOCTOU mismatch in the NFS client code in the Linux kernel before 5.8.3 could be used by local attackers to corrupt memory or possibly have unspecified other impact because a size check is in fs/nfs/nfs4proc.c instead of fs/nfs/nfs4xdr.c, aka CID-b4487b935452.

Multiple race conditions in the Advanced Union Filesystem (aufs) aufs3-mmap.patch and aufs4-mmap.patch patches for the Linux kernel 3.x and 4.x allow local users to cause a denial of service (use-after-free and BUG) or possibly gain privileges via a (1) madvise or (2) msync system call, related to mm/madvise.c and mm/msync.c.

automount 5.0.8, when a program map uses certain interpreted languages, uses the calling user's USER and HOME environment variable values instead of the values for the user used to run the mapped program, which allows local users to gain privileges via a Trojan horse program in the user home directory.

The npm package "tar" (aka node-tar) before versions 4.4.16, 5.0.8, and 6.1.7 has an arbitrary file creation/overwrite and arbitrary code execution vulnerability. node-tar aims to guarantee that any file whose location would be modified by a symbolic link is not extracted. This is, in part, achieved by ensuring that extracted directories are not symlinks. Additionally, in order to prevent unnecessary stat calls to determine whether a given path is a directory, paths are cached when directories are created. This logic was insufficient when extracting tar files that contained both a directory and a symlink with the same name as the directory, where the symlink and directory names in the archive entry used backslashes as a path separator on posix systems. The cache checking logic used both `\` and `/` characters as path separators, however `\` is a valid filename character on posix systems. By first creating a directory, and then replacing that directory with a symlink, it was thus possible to bypass node-tar symlink checks on directories, essentially allowing an untrusted tar file to symlink into an arbitrary location and subsequently extracting arbitrary files into that location, thus allowing arbitrary file creation and overwrite. Additionally, a similar confusion could arise on case-insensitive filesystems. If a tar archive contained a directory at `FOO`, followed by a symbolic link named `foo`, then on case-insensitive file systems, the creation of the symbolic link would remove the directory from the filesystem, but _not_ from the internal directory cache, as it would not be treated as a cache hit. A subsequent file entry within the `FOO` directory would then be placed in the target of the symbolic link, thinking that the directory had already been created. These issues were addressed in releases 4.4.16, 5.0.8 and 6.1.7. The v3 branch of node-tar has been deprecated and did not receive patches for these issues. If you are still using a v3 release we recommend you update to a more recent version of node-tar. If this is not possible, a workaround is available in the referenced GHSA-9r2w-394v-53qc.

The npm package "tar" (aka node-tar) before versions 4.4.18, 5.0.10, and 6.1.9 has an arbitrary file creation/overwrite and arbitrary code execution vulnerability. node-tar aims to guarantee that any file whose location would be modified by a symbolic link is not extracted. This is, in part, achieved by ensuring that extracted directories are not symlinks. Additionally, in order to prevent unnecessary stat calls to determine whether a given path is a directory, paths are cached when directories are created. This logic was insufficient when extracting tar files that contained both a directory and a symlink with names containing unicode values that normalized to the same value. Additionally, on Windows systems, long path portions would resolve to the same file system entities as their 8.3 "short path" counterparts. A specially crafted tar archive could thus include a directory with one form of the path, followed by a symbolic link with a different string that resolves to the same file system entity, followed by a file using the first form. By first creating a directory, and then replacing that directory with a symlink that had a different apparent name that resolved to the same entry in the filesystem, it was thus possible to bypass node-tar symlink checks on directories, essentially allowing an untrusted tar file to symlink into an arbitrary location and subsequently extracting arbitrary files into that location, thus allowing arbitrary file creation and overwrite. These issues were addressed in releases 4.4.18, 5.0.10 and 6.1.9. The v3 branch of node-tar has been deprecated and did not receive patches for these issues. If you are still using a v3 release we recommend you update to a more recent version of node-tar. If this is not possible, a workaround is available in the referenced GHSA-qq89-hq3f-393p.

hso_free_net_device in drivers/net/usb/hso.c in the Linux kernel through 5.13.4 calls unregister_netdev without checking for the NETREG_REGISTERED state, leading to a use-after-free and a double free.

Unity before 7.2.1, as used in Ubuntu 14.04, does not properly restrict access to the Dash when the lock screen is active, which allows physically proximate attackers to bypass the lock screen and execute arbitrary commands, as demonstrated by pressing the SUPER key before the screen auto-locks.

A use-after-free vulnerability was found in usbredir in versions prior to 0.11.0 in the usbredirparser_serialize() in usbredirparser/usbredirparser.c. This issue occurs when serializing large amounts of buffered write data in the case of a slow or blocked destination.

The (1) extract_keys_from_pdf and (2) fill_pdf functions in pdf_ext.py in logilab-commons before 0.61.0 allows local users to overwrite arbitrary files and possibly have other unspecified impact via a symlink attack on /tmp/toto.fdf.

XMP Toolkit SDK version 2020.1 (and earlier) is affected by a buffer overflow vulnerability potentially resulting in arbitrary code execution in the context of the current user. Exploitation requires user interaction in that a victim must open a crafted file.

nbd_add_socket in drivers/block/nbd.c in the Linux kernel through 5.10.12 has an ndb_queue_rq use-after-free that could be triggered by local attackers (with access to the nbd device) via an I/O request at a certain point during device setup, aka CID-b98e762e3d71.

net/bluetooth/hci_request.c in the Linux kernel through 5.12.2 has a race condition for removal of the HCI controller.

In RDoc 3.11 through 6.x before 6.3.1, as distributed with Ruby through 3.0.1, it is possible to execute arbitrary code via | and tags in a filename.

Another race in XENMAPSPACE_grant_table handling Guests are permitted access to certain Xen-owned pages of memory. The majority of such pages remain allocated / associated with a guest for its entire lifetime. Grant table v2 status pages, however, are de-allocated when a guest switches (back) from v2 to v1. Freeing such pages requires that the hypervisor enforce that no parallel request can result in the addition of a mapping of such a page to a guest. That enforcement was missing, allowing guests to retain access to pages that were freed and perhaps re-used for other purposes. Unfortunately, when XSA-379 was being prepared, this similar issue was not noticed.

Debian tmpreaper version 1.6.13+nmu1 has a race condition when doing a (bind) mount via rename() which could result in local privilege escalation. Mounting via rename() could potentially lead to a file being placed elsewhereon the filesystem hierarchy (e.g. /etc/cron.d/) if the directory being cleaned up was on the same physical filesystem. Fixed versions include 1.6.13+nmu1+deb9u1 and 1.6.14.

A Improper Limitation of a Pathname to a Restricted Directory vulnerability in the packaging of pcp of SUSE Linux Enterprise High Performance Computing 15-ESPOS, SUSE Linux Enterprise High Performance Computing 15-LTSS, SUSE Linux Enterprise Module for Development Tools 15, SUSE Linux Enterprise Module for Development Tools 15-SP1, SUSE Linux Enterprise Module for Open Buildservice Development Tools 15, SUSE Linux Enterprise Server 15-LTSS, SUSE Linux Enterprise Server for SAP 15, SUSE Linux Enterprise Software Development Kit 12-SP4, SUSE Linux Enterprise Software Development Kit 12-SP5; openSUSE Leap 15.1 allows local user pcp to overwrite arbitrary files with arbitrary content. This issue affects: SUSE Linux Enterprise High Performance Computing 15-ESPOS pcp versions prior to 3.11.9-5.8.1. SUSE Linux Enterprise High Performance Computing 15-LTSS pcp versions prior to 3.11.9-5.8.1. SUSE Linux Enterprise Module for Development Tools 15 pcp versions prior to 3.11.9-5.8.1. SUSE Linux Enterprise Module for Development Tools 15-SP1 pcp versions prior to 4.3.1-3.5.3. SUSE Linux Enterprise Module for Open Buildservice Development Tools 15 pcp versions prior to 3.11.9-5.8.1. SUSE Linux Enterprise Server 15-LTSS pcp versions prior to 3.11.9-5.8.1. SUSE Linux Enterprise Server for SAP 15 pcp versions prior to 3.11.9-5.8.1. SUSE Linux Enterprise Software Development Kit 12-SP4 pcp versions prior to 3.11.9-6.14.1. SUSE Linux Enterprise Software Development Kit 12-SP5 pcp versions prior to 3.11.9-6.14.1. openSUSE Leap 15.1 pcp versions prior to 4.3.1-lp151.2.3.1.

Orca has arbitrary code execution due to insecure Python module load

A code execution vulnerability exists in the directory rehashing functionality of E2fsprogs e2fsck 1.45.4. A specially crafted ext4 directory can cause an out-of-bounds write on the stack, resulting in code execution. An attacker can corrupt a partition to trigger this vulnerability.