IBM WebSphere Portal 7.0, 8.0, 8.5, and 9.0 may fail to set the correct user context in certain impersonation scenarios, which can allow a user to act with the identity of a different user. IBM X-Force ID: 144958.

cPanel before 55.9999.141 does not perform as two-factor authentication check when possessing another account (SEC-101).

The identity zones feature in Pivotal Cloud Foundry 208 through 229; UAA 2.0.0 through 2.7.3 and 3.0.0; UAA-Release 2 through 4, when configured with multiple identity zones; and Elastic Runtime 1.6.0 through 1.6.13 allows remote authenticated users with privileges in one zone to gain privileges and perform operations on a different zone via unspecified vectors.

An issue was discovered in hitshop through 2014-07-15. There is an elevation-of-privilege vulnerability (that allows control over the whole web site) via the admin.php/user/add URI because a storekeeper account (which is supposed to have only privileges for commodity management) can add an administrator account.

A vulnerability was found in Apereo CAS 6.6. It has been classified as critical. This affects an unknown part of the file /login?service of the component 2FA. The manipulation leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Multiple vulnerabilities in the web-based management interface of certain Cisco Small Business 100, 300, and 500 Series Wireless Access Points could allow an authenticated, remote attacker to obtain sensitive information from or inject arbitrary commands on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Improper authentication in the Intel(R) In-Band Manageability software before version 2.13.0 may allow a privileged user to potentially enable escalation of privilege via network access.

IBM Security QRadar SIEM 7.2 and 7.3 could allow a user to bypass authentication which could lead to code execution. IBM X-Force ID: 138824.

A CWE-269: Improper privilege management (write) vulnerability exists in Easergy T300 (Firmware version 1.5.2 and older) which could allow an attacker to elevate their privileges and delete files.

Huawei Video Content Management (VCM) before V100R001C10SPC001 does not properly "authenticate online user identities and privileges," which allows remote authenticated users to gain privileges and perform a case operation as another user via a crafted message, aka "Horizontal Privilege Escalation Vulnerability."

Citrix ADC and Citrix Gateway 13.0 before 13.0-64.35, Citrix ADC and NetScaler Gateway 12.1 before 12.1-58.15, Citrix ADC 12.1-FIPS before 12.1-55.187, Citrix ADC and NetScaler Gateway 12.0, Citrix ADC and NetScaler Gateway 11.1 before 11.1-65.12, Citrix SD-WAN WANOP 11.2 before 11.2.1a, Citrix SD-WAN WANOP 11.1 before 11.1.2a, Citrix SD-WAN WANOP 11.0 before 11.0.3f, Citrix SD-WAN WANOP 10.2 before 10.2.7b are vulnerable to escalation of privileges on the management interface.

The API on Fisher-Price Smart Toy Bear devices allows remote attackers to obtain sensitive information or modify data by leveraging presence in an 802.11 network's coverage area and entering an account number.

In Cloudera Hue, there is privilege escalation by a read-only user when CDH 5.x brefore 5.4.9 is used.

Elasticsearch versions from 6.7.0 before 6.8.8 and 7.0.0 before 7.6.2 contain a privilege escalation flaw if an attacker is able to create API keys. An attacker who is able to generate an API key can perform a series of steps that result in an API key being generated with elevated privileges.

SAP Landscape Management, version 3.0, and SAP Adaptive Extensions, version 1.0, allows an attacker with admin_group privileges to change ownership and permissions (including S-user ID bit s-bit) of arbitrary files remotely. This results in the possibility to execute these files as root user from a non-root context, leading to Privilege Escalation.

A privilege escalation issue was discovered in the postUser function in HashBrown CMS through 1.3.3. An editor user can change the password hash of an admin user's account, or otherwise reconfigure that account.

The WordPress plugin, WP Database Reset through 3.1, contains a flaw that gave any authenticated user, with minimal permissions, the ability (with a simple wp-admin/admin.php?db-reset-tables[]=users request) to escalate their privileges to administrator while dropping all other users from the table.

Improper Access Control in Teltonika firmware TRB2_R_00.02.04.01 allows a low privileged user to perform unauthorized write operations.

IBM Security Guardium Insights 2.0.1 performs an operation at a privilege level that is higher than the minimum level required, which creates new weaknesses or amplifies the consequences of other weaknesses. IBM X-Force ID: 184880.

IBM DataPower Gateway 2018.4.1.0 through 2018.4.1.8 could allow an authenticated user to bypass security restrictions, and continue to access the server even after authentication certificates have been revolked. IBM X-Force ID: 174961.

An issue was discovered in the Ultimate Member plugin before 2.1.12 for WordPress, aka Authenticated Privilege Escalation via Profile Update. Any user with wp-admin access to the profile.php page could supply the parameter um-role with a value set to any role (e.g., Administrator) during a profile update, and effectively escalate their privileges.

A vulnerability in the REST API endpoint of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to elevate privileges on the application. The vulnerability is due to insufficient access control validation. An attacker could exploit this vulnerability by authenticating with a low-privilege account and sending a crafted request to the API. A successful exploit could allow the attacker to interact with the API with administrative privileges.

BPC SmartVista 2 has Improper Access Control in the SVFE module, where it fails to appropriately restrict access: a normal user is able to access the SVFE2/pages/finadmin/currconvrate/currconvrate.jsf functionality that should be only accessible to an admin.

An issue was discovered in Joomla! Core before 3.8.8. Inadequate checks allowed users to modify the access levels of user groups with higher permissions.

cp_memberedit.php in LightBlog 8.4.1.1 does not check for administrative credentials when processing an admin action, which allows remote authenticated users to increase the privileges of any account.

LibreHealthIO lh-ehr version REL-2.0.0 contains a Authenticated Unrestricted File Write vulnerability in Patient file letter functions that can result in Write files with malicious content and may lead to remote code execution. This attack appear to be exploitable via User controlled parameters.

The fix for CVE-2020-7009 was found to be incomplete. Elasticsearch versions from 6.7.0 to 6.8.7 and 7.0.0 to 7.6.1 contain a privilege escalation flaw if an attacker is able to create API keys and also authentication tokens. An attacker who is able to generate an API key and an authentication token can perform a series of steps that result in an authentication token being generated with elevated privileges.

prosody before versions 0.10.2, 0.9.14 is vulnerable to an Authentication Bypass. Prosody did not verify that the virtual host associated with a user session remained the same across stream restarts. A user may authenticate to XMPP host A and migrate their authenticated session to XMPP host B of the same Prosody instance.

A sandbox bypass vulnerability exists in Script Security Plugin 1.47 and earlier in groovy-sandbox/src/main/java/org/kohsuke/groovy/sandbox/SandboxTransformer.java that allows attackers with Job/Configure permission to execute arbitrary code on the Jenkins master JVM, if plugins using the Groovy sandbox are installed.

The Open Microscopy Environment OMERO.server version 5.4.0 to 5.4.6 contains an Improper Access Control vulnerability in User management that can result in administrative user with privilege restrictions logging in as a more powerful administrator. This attack appear to be exploitable via Use user administration privilege to set the password of a more powerful administrator. This vulnerability appears to have been fixed in 5.4.7.

Kubernetes CRI-O version prior to 1.9 contains a Privilege Context Switching Error (CWE-270) vulnerability in the handling of ambient capabilities that can result in containers running with elevated privileges, allowing users abilities they should not have. This attack appears to be exploitable via container execution. This vulnerability appears to have been fixed in 1.9.

A vulnerability in the configuration and management service of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to execute arbitrary code with vmanage user privileges or cause a denial of service (DoS) condition on an affected system. The vulnerability is due to insufficient access restrictions to the HTTP management interface of the affected solution. An attacker could exploit this vulnerability by sending a malicious HTTP request to the affected management service through an authenticated device. A successful exploit could allow the attacker to execute arbitrary code with vmanage user privileges or stop HTTP services on an affected system. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69976.

The built-in WEB server for MOXA NPort IAW5000A-I/O firmware version 2.1 or lower has improper privilege management, which may allow an attacker with user privileges to perform requests with administrative privileges.

A vulnerability in the Cisco IOS XE Software REST API could allow an authenticated, remote attacker to bypass API authorization checks and use the API to perform privileged actions on an affected device. The vulnerability is due to insufficient authorization checks for requests that are sent to the REST API of the affected software. An attacker could exploit this vulnerability by sending a malicious request to an affected device via the REST API. A successful exploit could allow the attacker to selectively bypass authorization checks for the REST API of the affected software and use the API to perform privileged actions on an affected device. Cisco Bug IDs: CSCuz56428.

NEC Platforms Calsos CSDX and CSDJ series products (CSDX 1.37210411 and earlier, CSDX(P) 4.37210411 and earlier, CSDX(D) 3.37210411 and earlier, CSDX(S) 2.37210411 and earlier, CSDJ-B 01.03.00 and earlier, CSDJ-H 01.03.00 and earlier, CSDJ-D 01.03.00 and earlier, CSDJ-A 03.00.00) allows remote authenticated attackers to bypass access restriction to conduct arbitrary operations with administrative privilege via unspecified vectors.

An issue was discovered on Vera VeraEdge 1.7.19 and Veralite 1.7.481 devices. The device provides UPnP services that are available on port 3480 and can also be accessed via port 80 using the url "/port_3480". It seems that the UPnP services provide "wget" as one of the service actions for a normal user to connect the device to an external website. It retrieves the parameter "URL" from the query string and then passes it to an internal function that uses the curl module on the device to retrieve the contents of the website.

An information disclosure / elevation of privilege vulnerability in the BlackBerry Workspaces Server could potentially allow an attacker who has legitimate access to BlackBerry Workspaces to gain access to another user's workspace by making multiple login requests to the server.

In Open Ticket Request System (OTRS) 3.3.x through 3.3.16, 4.x through 4.0.23, and 5.x through 5.0.19, an attacker with agent permission is capable of opening a specific URL in a browser to gain administrative privileges / full access. Afterward, all system settings can be read and changed. The URLs in question contain index.pl?Action=Installer with ;Subaction=Intro or ;Subaction=Start or ;Subaction=System appended at the end.

An authenticated user might execute malicious code under the user context and take control of the system. S+ Operations or S+ Historian database is affected by multiple vulnerabilities such as the possibility to allow remote authenticated users to gain high privileges.

Authentication vulnerability found in Dahua NVR models NVR50XX, NVR52XX, NVR54XX, NVR58XX with software before DH_NVR5xxx_Eng_P_V2.616.0000.0.R.20171102. Attacker could exploit this vulnerability to gain access to additional operations by means of forging json message.

Huawei FusionSphere OpenStack V100R006C00SPC102(NFV) has a privilege escalation vulnerability. Due to improper privilege restrictions, an attacker with high privilege may obtain the other users' certificates. Successful exploit may cause privilege escalation.

The FusionSphere OpenStack V100R006C00SPC102(NFV) has an improper authentication vulnerability. Due to improper authentication on one port, an authenticated, remote attacker may exploit the vulnerability to execute more operations by send a crafted rest message.

Roundcube Webmail allows arbitrary password resets by authenticated users. This affects versions before 1.0.11, 1.1.x before 1.1.9, and 1.2.x before 1.2.5. The problem is caused by an improperly restricted exec call in the virtualmin and sasl drivers of the password plugin.

Elastic X-Pack Security versions 5.0.0 to 5.4.0 contain a privilege escalation bug in the run_as functionality. This bug prevents transitioning into the specified user specified in a run_as request. If a role has been created using a template that contains the _user properties, the behavior of run_as will be incorrect. Additionally if the run_as user specified does not exist, the transition will not happen.

Cloudera Manager 5.8.x before 5.8.5, 5.9.x before 5.9.2, and 5.10.x before 5.10.1 allows a read-only Cloudera Manager user to discover the usernames of other users and elevate the privileges of those users.

Several administrative resources in Atlassian Jira before version 7.6.9, from version 7.7.0 before version 7.7.5, from version 7.8.0 before version 7.8.5, from version 7.9.0 before version 7.9.3, from version 7.10.0 before version 7.10.3, from version 7.11.0 before version 7.11.3, from version 7.12.0 before version 7.12.3, and before version 7.13.1 allow remote attackers who have obtained access to administrator's session to access certain administrative resources without needing to re-authenticate to pass "WebSudo" through an improper access control vulnerability.

An attacker that has hijacked a Unitrends Enterprise Backup (before 9.1.2) web server session can leverage api/includes/users.php to change the password of the logged in account without knowing the current password. This allows for an account takeover.

An issue was discovered in phpMyAdmin 4.8.x before 4.8.2, in which an attacker can include (view and potentially execute) files on the server. The vulnerability comes from a portion of code where pages are redirected and loaded within phpMyAdmin, and an improper test for whitelisted pages. An attacker must be authenticated, except in the "$cfg['AllowArbitraryServer'] = true" case (where an attacker can specify any host he/she is already in control of, and execute arbitrary code on phpMyAdmin) and the "$cfg['ServerDefault'] = 0" case (which bypasses the login requirement and runs the vulnerable code without any authentication).

In Moodle 2.x and 3.x, remote authenticated users can take ownership of arbitrary blogs by editing an external blog link.

In Apache Zeppelin prior to 0.8.0 the cron scheduler was enabled by default and could allow users to run paragraphs as other users without authentication.