DLL hijacking vulnerability in Gear IconX PC Manager prior to version 2.1.220405.51 allows attacker to execute arbitrary code. The patch adds proper absolute path to prevent dll hijacking.

In Fazecast jSerialComm, Version 2.2.2 and prior, an uncontrolled search path element vulnerability could allow a malicious DLL file with the same name of any resident DLLs inside the software installation to execute arbitrary code.

DLL hijacking vulnerability in Smart Switch PC prior to version 4.2.22022_4 allows attacker to execute abitrary code.

Untrusted search path vulnerability in AttacheCase ver.3.6.1.0 and earlier allows an attacker to gain privileges and execute arbitrary code via a Trojan horse DLL in an unspecified directory.

DLL hijacking vulnerability in Kies prior to version 2.6.4.22014_2 allows attacker to execute abitrary code.

WPS Presentation 11.8.0.5745 insecurely load d3dx9_41.dll when opening .pps files('current directory type' DLL loading).

An installer search patch element vulnerability in Trend Micro Portable Security 3.0 Pro, 3.0 and 2.0 could allow a local attacker to place an arbitrarily generated DLL file in an installer folder to elevate local privileges. Please note: an attacker must first obtain the ability to execute high-privileged code on the target system in order to exploit this vulnerability.

DPMAdirektPro 4.1.5 is vulnerable to DLL Hijacking. It happens by placing a malicious DLL in a directory (in the absence of a legitimate DLL), which is then loaded by the application instead of the legitimate DLL. This causes the malicious DLL to load with the same privileges as the application, thus causing a privilege escalation.

The installer of WPS Office Version 10.8.0.6186 insecurely load VERSION.DLL (or some other DLLs), allowing an attacker to execute arbitrary code with the privilege of the user invoking the installer.

A vulnerability, which was classified as critical, has been found in Discord 1.0.9188 on Windows. Affected by this issue is some unknown functionality in the library WINSTA.dll. The manipulation leads to uncontrolled search path. The attack needs to be approached locally. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Untrusted search path vulnerability in AttacheCase ver.4.0.2.7 and earlier allows an attacker to gain privileges and execute arbitrary code via a Trojan horse DLL in an unspecified directory.

Git for Windows is a fork of Git containing Windows-specific patches. This vulnerability affects users working on multi-user machines, where untrusted parties have write access to the same hard disk. Those untrusted parties could create the folder `C:\.git`, which would be picked up by Git operations run supposedly outside a repository while searching for a Git directory. Git would then respect any config in said Git directory. Git Bash users who set `GIT_PS1_SHOWDIRTYSTATE` are vulnerable as well. Users who installed posh-gitare vulnerable simply by starting a PowerShell. Users of IDEs such as Visual Studio are vulnerable: simply creating a new project would already read and respect the config specified in `C:\.git\config`. Users of the Microsoft fork of Git are vulnerable simply by starting a Git Bash. The problem has been patched in Git for Windows v2.35.2. Users unable to upgrade may create the folder `.git` on all drives where Git commands are run, and remove read/write access from those folders as a workaround. Alternatively, define or extend `GIT_CEILING_DIRECTORIES` to cover the _parent_ directory of the user profile, e.g. `C:\Users` if the user profile is located in `C:\Users\my-user-name`.

GitHub: Git for Windows' uninstaller vulnerable to DLL hijacking when run under the SYSTEM user account.

The LSP (Language Server Protocol) plugin in KDE Kate before 21.12.2 and KTextEditor before 5.91.0 tries to execute the associated LSP server binary when opening a file of a given type. If this binary is absent from the PATH, it will try running the LSP server binary in the directory of the file that was just opened (due to a misunderstanding of the QProcess API, that was never intended). This can be an untrusted directory.

Naver Cloud Explorer Beta allows the attacker to execute arbitrary code as System privilege via malicious DLL injection.

AXIS IP Utility before 4.18.0 allows for remote code execution and local privilege escalation by the means of DLL hijacking. IPUtility.exe would attempt to load DLLs from its current working directory which could allow for remote code execution if a compromised DLL would be placed in the same folder.

A vulnerability has been identified in SIMATIC Energy Manager Basic (All versions < V7.3 Update 1), SIMATIC Energy Manager PRO (All versions < V7.3 Update 1). A DLL Hijacking vulnerability could allow a local attacker to execute code with elevated privileges by placing a malicious DLL in one of the directories on the DLL search path.

If an attacker manages to trick a valid user into loading a malicious DLL, the attacker may be able to achieve code execution in Honeywell SoftMaster version 4.51 application’s context and permissions.

The following Yokogawa Electric products contain insecure DLL loading issues. CENTUM CS 3000 versions from R3.08.10 to R3.09.00, CENTUM VP versions from R4.01.00 to R4.03.00, from R5.01.00 to R5.04.20, and from R6.01.00 to R6.08.00, Exaopc versions from R3.72.00 to R3.79.00.

The G-RAID 4/8 Software Utility setups for Windows were affected by a DLL hijacking vulnerability. Successful exploitation could lead to arbitrary code execution in the context of the system user.

The Zoom Opener installer is downloaded by a user from the Launch meeting page, when attempting to join a meeting without having the Zoom Meeting Client installed. The Zoom Opener installer for Zoom Client for Meetings before version 5.10.3 and Zoom Rooms for Conference Room for Windows before version 5.10.3 are susceptible to a DLL injection attack. This vulnerability could be used to run arbitrary code on the victims host.

EasyRange Ver 1.41 contains an issue with the executable file search path when displaying an extracted file on Explorer, which may lead to loading an executable file resides in the same folder where the extracted file is placed. If this vulnerability is exploited, arbitrary code may be executed with the privilege of the running program. Note that the developer was unreachable, therefore, users should consider stop using EasyRange Ver 1.41.

fish is a command line shell. fish version 3.1.0 through version 3.3.1 is vulnerable to arbitrary code execution. git repositories can contain per-repository configuration that change the behavior of git, including running arbitrary commands. When using the default configuration of fish, changing to a directory automatically runs `git` commands in order to display information about the current repository in the prompt. If an attacker can convince a user to change their current directory into one controlled by the attacker, such as on a shared file system or extracted archive, fish will run arbitrary commands under the attacker's control. This problem has been fixed in fish 3.4.0. Note that running git in these directories, including using the git tab completion, remains a potential trigger for this issue. As a workaround, remove the `fish_git_prompt` function from the prompt.

AutomationDirect DirectLOGIC has a DLL vulnerability in the install directory that may allow an attacker to execute code during the installation process. This issue affects: AutomationDirect C-more EA9 EA9-T6CL versions prior to 6.73; EA9-T6CL-R versions prior to 6.73; EA9-T7CL versions prior to 6.73; EA9-T7CL-R versions prior to 6.73; EA9-T8CL versions prior to 6.73; EA9-T10CL versions prior to 6.73; EA9-T10WCL versions prior to 6.73; EA9-T12CL versions prior to 6.73; EA9-T15CL versions prior to 6.73; EA9-RHMI versions prior to 6.73; EA9-PGMSW versions prior to 6.73;

Delta Electronics DIAEnergie (all versions prior to 1.8.02.004) are vulnerable to a DLL hijacking condition. When combined with the Incorrect Default Permissions vulnerability of 4.2.2 above, this makes it possible for an attacker to escalate privileges

The affected setup component is vulnerable to DLL hijacking. This could allow an attacker to execute arbitrary code when a legitimate user installs an application that uses the affected setup component.

A DLL search path vulnerability was reported in Lenovo PCManager prior to version 4.0.40.2175 that could allow privilege escalation.

There is a DLL hijacking vulnerability due to an uncontrolled search path that exists in NI LabVIEW when loading NI Error Reporting. This vulnerability may result in arbitrary code execution. Successful exploitation requires an attacker to insert a malicious DLL into the uncontrolled search path. This vulnerability affects NI LabVIEW 2025 Q1 and prior versions.

There is a DLL hijacking vulnerability due to an uncontrolled search path that exists in NI LabVIEW. This vulnerability may result in arbitrary code execution. Successful exploitation requires an attacker to insert a malicious DLL into the uncontrolled search path. This vulnerability affects NI LabVIEW 2025 Q1 and prior versions.

RSA Identity Governance and Lifecycle, RSA Via Lifecycle and Governance, and RSA IMG releases have an uncontrolled search vulnerability. The installation scripts set an environment variable in an unintended manner. A local authenticated malicious user could trick the root user to run malicious code on the targeted system.

A vulnerability was found in Symantec Norton Download Manager versions prior to 5.6. A remote user can create a specially crafted DLL file that, when placed on the target user's system, will cause the Norton Download Manager component to load the remote user's DLL instead of the intended DLL and execute arbitrary code when the Norton Download Manager component is run by the target user.

ERDAS ER Viewer 13.0 has dwmapi.dll and irml.dll libraries arbitrary code execution vulnerabilities

Uncontrolled search path element vulnerability in Plesk Installer affects version 3.27.0.0. A local attacker could execute arbitrary code by injecting DLL files into the same folder where the application is installed, resulting in DLL hijacking in edputil.dll, samlib.dll, urlmon.dll, sspicli.dll, propsys.dll and profapi.dll files.

A DLL preloading vulnerability was reported in Lenovo Driver Management prior to version 2.9.0719.1104 that could allow privilege escalation.

Local privilege escalation due to DLL hijacking vulnerability. The following products are affected: Acronis Cyber Protect Home Office (Windows) before build 40901, Acronis Cyber Protect Cloud Agent (Windows) before build 39378, Acronis Cyber Protect 16 (Windows) before build 39938.

Missing DLLs, if replaced by an insider, could allow an attacker to achieve local privilege escalation on the DeltaV Distributed Control System Controllers and Workstations (All versions) when some DeltaV services are started.

Razer Synapse before 3.7.0228.022817 allows privilege escalation because it relies on %PROGRAMDATA%\Razer\Synapse3\Service\bin even if %PROGRAMDATA%\Razer has been created by any unprivileged user before Synapse is installed. The unprivileged user may have placed Trojan horse DLLs there.

An uncontrolled search path element vulnerability has been found on 4D and 4D server Windows executables applications, affecting version 19 R8 100218. This vulnerability consists in a DLL hijacking by replacing x64 shfolder.dll in the installation path, causing an arbitrary code execution.

Affected versions of Atlassian Confluence Server and Data Center allow authenticated local attackers to achieve elevated privileges on the local system via a DLL Hijacking vulnerability in the Confluence installer. This vulnerability only affects installations of Confluence Server and Data Center on Windows. The affected versions are before version 7.4.10, and from version 7.5.0 before 7.12.3.

DLL hijacking could lead to local privilege escalation. The following products are affected: Acronis Cyber Protect 15 (Windows) before build 28035

An issue was discovered in Kaseya Unitrends Backup Appliance before 10.5.5. The Unitrends Windows agent was vulnerable to DLL injection and binary planting due to insecure default permissions. This allowed privilege escalation from an unprivileged user to SYSTEM.

EzViz Studio v2.2.0 is vulnerable to DLL hijacking.

Substance3D - Modeler versions 1.21.0 and earlier are affected by an Uncontrolled Search Path Element vulnerability that could result in arbitrary code execution in the context of the current user. If the application relies on a search path to locate critical resources such as libraries or executables, an attacker could manipulate the search path to load a malicious resource, potentially executing arbitrary code. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

ForeScout NAC SecureConnector version 11.2 - CWE-427: Uncontrolled Search Path Element

An issue was discovered in Foxit Reader and PhantomPDF before 10.1.4. It allows DLL hijacking, aka CNVD-C-2021-68000 and CNVD-C-2021-68502.

AVEVA Software Platform Common Services (PCS) Portal versions 4.5.2, 4.5.1, 4.5.0, and 4.4.6 are vulnerable to DLL hijacking through an uncontrolled search path element, which may allow an attacker control to one or more locations in the search path.

Acronis Cyber Protect 15 for Windows prior to build 27009 and Acronis Agent for Windows prior to build 26226 allowed local privilege escalation via DLL hijacking.

dandavison delta before 0.8.3 on Windows resolves an executable's pathname as a relative path from the current directory.

Encode.pm, as distributed in Perl through 5.34.0, allows local users to gain privileges via a Trojan horse Encode::ConfigLocal library (in the current working directory) that preempts dynamic module loading. Exploitation requires an unusual configuration, and certain 2021 versions of Encode.pm (3.05 through 3.11). This issue occurs because the || operator evaluates @INC in a scalar context, and thus @INC has only an integer value.

OpenVPN before version 2.5.3 on Windows allows local users to load arbitrary dynamic loadable libraries via an OpenSSL configuration file if present, which allows the user to run arbitrary code with the same privilege level as the main OpenVPN process (openvpn.exe).