In multiple locations, there is a possible out of bounds write due to a use after free. This could lead to remote code execution over Bluetooth, if HFP support is enabled, with no additional execution privileges needed. User interaction is not needed for exploitation.

Linksys E8450 v1.2.00.360516 was discovered to contain a command injection vulnerability via the field id_email_check_btn.

An issue was discovered in Victure RX1800 WiFi 6 Router (software EN_V1.0.0_r12_110933, hardware 1.0) devices. The /cgi-bin/luci/admin/opsw/Dual_freq_un_apple endpoint is vulnerable to command injection through the 2.4 GHz and 5 GHz name parameters, allowing an attacker to execute arbitrary commands on the device (with root-level permissions) via crafted input.

Tenda AC7 v.15.03.06.44 ate_ifconfig_set has pre-authentication command injection allowing remote attackers to execute arbitrary code.

Tenda AC7 v.15.03.06.44 ate_iwpriv_set has pre-authentication command injection allowing remote attackers to execute arbitrary code.

Totolink routers s X5000R V9.1.0u.6118_B20201102 and A7000R V9.1.0u.6115_B20201022 were discovered to contain a command injection vulnerability in the Tunnel 6in4 function via the remote6in4 parameter. This vulnerability allows attackers to execute arbitrary commands via a crafted request.

In Vecna VGo Robot versions prior to 3.0.3.52164, an attacker on an adjacent network could perform command injection.

D-Link DI-7003GV2 v24.04.18D1, DI-7100G+V2 v24.04.18D1, DI-7100GV2 v24.04.18D1, DI-7200GV2 v24.04.18E1, DI-7300G+V2 v24.04.18D1, and DI-7400G+V2 v24.04.18D1 are vulnerable to Remote Command Execution. An attacker can achieve arbitrary command execution by sending a carefully crafted malicious string to the CGI function responsible for handling usb_paswd.asp.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects WAC505 before 5.0.0.17 and WAC510 before 5.0.0.17.

A malicious user on the same LAN could use DNS spoofing followed by a command injection attack to trick a NAS device into loading through an unsecured HTTP call. Addressed this vulnerability by disabling checks for internet connectivity using HTTP.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects WAC505 before 5.0.0.17 and WAC510 before 5.0.0.17.

Wi-Fi Alliance wfa_dut (in Wi-Fi Test Suite) through 9.0.0 allows OS command injection via 802.11x frames because the system() library function is used. For example, on Arcadyan FMIMG51AX000J devices, this leads to wfaTGSendPing remote code execution as root via traffic to TCP port 8000 or 8080 on a LAN interface. On other devices, this may be exploitable over a WAN interface.

In WIFI Firmware, there is a possible memory corruption due to a use after free. This could lead to remote escalation of privilege, when devices are connecting to the attacker-controllable Wi-Fi hotspot, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS06468872; Issue ID: ALPS06468872.

The Photo Sharing Plus component on Sony Bravia TV through 8.587 devices allows Shell Metacharacter Injection.

Aterm WF1200CR and Aterm WG1200CR (Aterm WF1200CR firmware Ver1.1.1 and earlier, Aterm WG1200CR firmware Ver1.0.1 and earlier) allows an attacker on the same network segment to execute arbitrary OS commands via SOAP interface of UPnP.

A vulnerability in the cluster service manager of Cisco HyperFlex Software could allow an unauthenticated, adjacent attacker to execute commands as the root user. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by connecting to the cluster service manager and injecting commands into the bound process. A successful exploit could allow the attacker to run commands on the affected host as the root user. This vulnerability affects Cisco HyperFlex Software releases prior to 3.5(2a).

Buffalo WZR-1750DHP2 Ver.2.30 and earlier allows an attacker to execute arbitrary OS commands via unspecified vectors.

Buffalo WXR-1900DHP2 firmware Ver.2.48 and earlier allows an attacker to execute arbitrary OS commands via unspecified vectors.

A command injection vulnerability in the CGI program of the Zyxel ARMOR Z1/Z2 firmware could allow an attacker to execute arbitrary OS commands via a LAN interface.

An unauthenticated remote code execution vulnerability was reported in some Motorola-branded Binatone Hubble Cameras that could allow an attacker on the same network unauthorized access to the device.

TS-WPTCAM firmware version 1.18 and earlier, TS-WPTCAM2 firmware version 1.00, TS-WLCE firmware version 1.18 and earlier, TS-WLC2 firmware version 1.18 and earlier, TS-WRLC firmware version 1.17 and earlier, TS-PTCAM firmware version 1.18 and earlier, TS-PTCAM/POE firmware version 1.18 and earlier allows remote attackers to execute arbitrary OS commands via unspecified vectors.

WN-AX1167GR firmware version 3.00 and earlier allows an attacker to execute arbitrary OS commands via unspecified vectors.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker via the vulnerable /sqfs/lib/libsal.so.0.0 library used by a CGI application, as demonstrated by setup.cgi?token=';$HTTP_USER_AGENT;' with an OS command in the User-Agent field. This affects GC108P before 1.0.7.3, GC108PP before 1.0.7.3, GS108Tv3 before 7.0.6.3, GS110TPPv1 before 7.0.6.3, GS110TPv3 before 7.0.6.3, GS110TUPv1 before 1.0.4.3, GS710TUPv1 before 1.0.4.3, GS716TP before 1.0.2.3, GS716TPP before 1.0.2.3, GS724TPPv1 before 2.0.4.3, GS724TPv2 before 2.0.4.3, GS728TPPv2 before 6.0.6.3, GS728TPv2 before 6.0.6.3, GS752TPPv1 before 6.0.6.3, GS752TPv2 before 6.0.6.3, MS510TXM before 1.0.2.3, and MS510TXUP before 1.0.2.3.

Alpine Halo9 prh_l2_sar_data_ind Use-After-Free Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Alpine Halo9 devices. Authentication is not required to exploit this vulnerability. The specific flaw exists within the prh_l2_sar_data_ind function. The issue results from the lack of validating the existence of an object prior to performing operations on the object. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-22945

Command Injection vulnerability in app_data_center on Shenzhen Tenda Ac9 US_AC9V1.0BR_V15.03.05.14_multi_TD01, Ac9 ac9_kf_V15.03.05.19(6318_)_cn, Ac15 US_AC15V1.0BR_V15.03.05.18_multi_TD01, Ac15 US_AC15V1.0BR_V15.03.05.19_multi_TD01, Ac18 US_AC18V1.0BR_V15.03.05.05_multi_TD01, and Ac18 ac18_kf_V15.03.05.19(6318_)_cn devices allows remote unauthenticated attackers to execute arbitrary OS commands via a crafted cgi-bin/luci/usbeject?dev_name= GET request from the LAN. This occurs because the "sub_A6E8 usbeject_process_entry" function executes a system function with untrusted input.

in OpenHarmony v4.0.0 and prior versions allow an adjacent attacker arbitrary code execution in any apps through use after free.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2020 v1.01rc001 Wi-Fi access points. Authentication is not required to exploit this vulnerability. The specific flaw exists within the processing of CGI scripts. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-11369.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R7800 firmware version 1.0.2.76. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of the rc_service parameter provided to apply_save.cgi. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-12355.

An issue was discovered in Victure RX1800 WiFi 6 Router (software EN_V1.0.0_r12_110933, hardware 1.0) devices. Certain /cgi-bin/luci/admin endpoints are vulnerable to command injection. Attackers can exploit this by sending crafted payloads through parameters intended for the ping utility, enabling arbitrary command execution with root-level permissions on the device.

D-Link G416 flupl self Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 wireless routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21294.

Sonos Era 100 SMB2 Message Handling Use-After-Free Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Sonos Era 100 smart speakers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of SMB2 messages. The issue results from the lack of validating the existence of an object prior to performing operations on the object. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-22459.

Tenda G3 v3.0 v15.11.0.20 was discovered to contain a command injection vulnerability via the formSetUSBPartitionUmount function.

Tenda G3 v3.0 v15.11.0.20 was discovered to contain a command injection vulnerability via the formSetDebugCfg function.

D-Link DIR_823G 1.0.2B05 was discovered to contain a command injection vulnerability via the Address parameter in the SetNetworkTomographySettings function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted request.

HOME SPOT CUBE2 V102 contains an OS command injection vulnerability due to improper processing of data received from DHCP server. An adjacent attacker may execute an arbitrary OS command on the product if a malicious DHCP server is placed on the WAN side of the product.

An unauthenticated command injection vulnerability exists in the parameters of operation 3 in the controller_server service on Gryphon Tower routers. An unauthenticated remote attacker on the same network can execute commands as root on the device by sending a specially crafted malicious packet to the controller_server service on port 9999.

An unauthenticated command injection vulnerability exists in the parameters of operation 32 in the controller_server service on Gryphon Tower routers. An unauthenticated remote attacker on the same network can execute commands as root on the device by sending a specially crafted malicious packet to the controller_server service on port 9999.

An unauthenticated command injection vulnerability exists in multiple parameters in the Gryphon Tower router’s web interface at /cgi-bin/luci/rc. An unauthenticated remote attacker on the same network can execute commands as root on the device by sending a specially crafted malicious packet to the web interface.

D-Link DIR-822+ V1.0.5 was found to contain a command injection in ChgSambaUserSettings function of prog.cgi, which allows remote attackers to execute arbitrary commands via shell.