An authenticated command injection vulnerability exists in status_interfaces.php via dhcp_relinquish_lease() in pfSense before 2.4.4 due to its passing user input from the $_POST parameters "ifdescr" and "ipv" to a shell without escaping the contents of the variables. This allows an authenticated WebGUI user with privileges for the affected page to execute commands in the context of the root user when submitting a request to relinquish a DHCP lease for an interface which is configured to obtain its address via DHCP.

Certain models of routers from Billion Electric has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject arbitrary system commands into a specific SSH function and execute them on the device.

www/soap/application/MCSoap/Logs.php in MailCleaner Community Edition 2018.08 allows remote attackers to execute arbitrary OS commands.

An issue was discovered in MISP 2.4.9x before 2.4.99. In app/Model/Event.php (the STIX 1 import code), an unescaped filename string is used to construct a shell command. This vulnerability can be abused by a malicious authenticated user to execute arbitrary commands by tweaking the original filename of the STIX import.

A post-authentication command injection vulnerability in the "ZyEE" function of the Zyxel EX5601-T1 firmware version V5.70(ACDZ.3.6)C0 and earlier could allow an authenticated attacker with administrator privileges to execute operating system (OS) commands on a vulnerable device.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in the web-based management interface of certain Cisco Small Business 100, 300, and 500 Series Wireless Access Points could allow an authenticated, remote attacker to obtain sensitive information from or inject arbitrary commands on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

IBM BigFix Platform 9.0, 9.1 before 9.1.8, and 9.2 before 9.2.8 allow remote authenticated users to execute arbitrary commands by leveraging report server access. IBM X-Force ID: 111302.

A post-authentication command injection vulnerability in the ”zyUtilMailSend” function of the Zyxel AX7501-B1 firmware version V5.17(ABPC.5.3)C0 and earlier could allow an authenticated attacker with administrator privileges to execute operating system (OS) commands on a vulnerable device.

Cerio DT-300N 1.1.6 through 1.1.12 devices allow OS command injection because of improper input validation of the web-interface PING feature's use of Save.cgi to execute a ping command, as exploited in the wild in October 2018.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

IDExpert from CHANGING Information Technology does not properly validate a specific parameter in the administrator interface, allowing remote attackers with administrative privileges to inject and execute OS commands on the server.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.

Command injection in Ivanti Connect Secure before version 22.7R2.1 (Not Applicable to 9.1Rx) and Ivanti Policy Secure before version 22.7R1.1 (Not Applicable to 9.1Rx) allows a remote authenticated attacker with admin privileges to achieve remote code execution.

Multiple vulnerabilities in Cisco DNA Spaces Connector could allow an authenticated, remote attacker to perform a command injection attack on an affected device. These vulnerabilities are due to insufficient input sanitization when executing affected commands. A high-privileged attacker could exploit these vulnerabilities on a Cisco DNA Spaces Connector by injecting crafted input during command execution. A successful exploit could allow the attacker to execute arbitrary commands as root within the Connector docker container.

fileshare.cmd on Telus Actiontec T2200H T2200H-31.128L.03 devices allows OS Command Injection via shell metacharacters in the smbdUserid or smbdPasswd field.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

A sandbox escape issue was discovered in VyOS 1.1.8. It provides a restricted management shell for operator users to administer the device. By issuing various shell special characters with certain commands, an authenticated operator user can break out of the management shell and gain access to the underlying Linux shell. The user can then run arbitrary operating system commands with the privileges afforded by their account.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.

A post-authentication command injection vulnerability in the "DNSServer” parameter of the diagnostic function in the Zyxel VMG8825-T50K firmware version V5.50(ABOM.8.5)C0 and earlier could allow an authenticated attacker with administrator privileges to execute operating system (OS) commands on a vulnerable device.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.

Command injection in Ivanti Connect Secure before version 22.7R2.1 (Not Applicable to 9.1Rx) and Ivanti Policy Secure before version 22.7R1.1 (Not Applicable to 9.1Rx) allows a remote authenticated attacker with admin privileges to achieve remote code execution.

Command injection in Ivanti Connect Secure before version 22.7R2.1 (Not Applicable to 9.1Rx) and Ivanti Policy Secure before version 22.7R1.1 (Not Applicable to 9.1Rx) allows a remote authenticated attacker with admin privileges to achieve remote code execution.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through the specific web page.

NUUO NVRMini2 version 3.9.1 is vulnerable to authenticated remote command injection. An attacker can send crafted requests to upgrade_handle.php to execute OS commands as root.

Netis WF2471 v1.2.30142 devices allow an authenticated attacker to execute arbitrary OS commands via shell metacharacters in the /cgi-bin-igd/sys_log_clean.cgi log_3g_type parameter.

Gocloud S2A_WL 4.2.7.16471, S2A 4.2.7.17278, S2A 4.3.0.15815, S2A 4.3.0.17193, S3A K2P MTK 4.2.7.16528, S3A 4.3.0.16572, and ISP3000 4.3.0.17190 devices allows remote attackers to execute arbitrary OS commands via shell metacharacters in a ping operation, as demonstrated by the cgi-bin/webui/admin/tools/app_ping/diag_ping/; substring.

Centreon 19.10 allows remote authenticated users to execute arbitrary OS commands via shell metacharacters in the server_ip field in JSON data in an api/internal.php?object=centreon_configuration_remote request.

PHOENIX CONTACT TC ROUTER 3002T-4G through 2.05.3, TC ROUTER 2002T-3G through 2.05.3, TC ROUTER 3002T-4G VZW through 2.05.3, TC ROUTER 3002T-4G ATT through 2.05.3, TC CLOUD CLIENT 1002-4G through 2.03.17, and TC CLOUD CLIENT 1002-TXTX through 1.03.17 devices allow authenticated users to inject system commands through a modified POST request to a specific URL.

functions_netflow.php in Artica Pandora FMS 7.0 allows remote attackers to execute arbitrary OS commands via shell metacharacters in the index.php?operation/netflow/nf_live_view ip_dst, dst_port, or src_port parameter, a different vulnerability than CVE-2019-20224.

The Admin web application in Kinetica 7.0.9.2.20191118151947 does not properly sanitise the input for the function getLogs. This lack of sanitisation could be exploited to allow an authenticated attacker to run remote code on the underlying operating system. The logFile parameter in the getLogs function was used as a variable in a command to read log files; however, due to poor input sanitisation, it was possible to bypass a replacement and break out of the command.

Pi-hole Web v4.3.2 (aka AdminLTE) allows Remote Code Execution by privileged dashboard users via a crafted DHCP static lease.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Moxa MGate 5105-MB-EIP firmware version 4.1. Authentication is required to exploit this vulnerability. The specific flaw exists within the DestIP parameter within MainPing.asp. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9552.

Guangzhou 1GE ONU V2801RW 1.9.1-181203 through 2.9.0-181024 and V2804RGW 1.9.1-181203 through 2.9.0-181024 devices allow remote attackers to execute arbitrary OS commands via shell metacharacters in the boaform/admin/formPing Dest IP Address field.

An exploitable operating system command injection exists in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04). Specially crafted entries to network configuration information can cause execution of arbitrary system commands, resulting in full control of the device. An attacker can send an authenticated HTTP request to trigger this vulnerability. Data entered into the 'Domain Name' input field through the web portal is submitted to apply.cgi as the value to the 'wan_domain' POST parameter. The wan_domain data goes through the nvram_set process described above. When the 'preinit' binary receives the SIGHUP signal it enters a code path that calls a function named 'set_host_domain_name' from its libshared.so shared object.

An issue was discovered in EyesOfNetwork 5.3. An authenticated web user with sufficient privileges could abuse the AutoDiscovery module to run arbitrary OS commands via the /module/module_frame/index.php autodiscovery.php target field.

Ruckus ZoneFlex R500 104.0.0.0.1347 devices allow an authenticated attacker to execute arbitrary OS commands via the hidden /forms/nslookupHandler form, as demonstrated by the nslookuptarget=|cat${IFS} substring.

A vulnerability was found in TRENDnet TEW-800MB 1.0.1.0 and classified as critical. Affected by this issue is some unknown functionality of the component POST Request Handler. The manipulation of the argument DeviceURL leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-252122 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Sage X3 System CHAINE Variable Script Command Injection. An authenticated user with developer access can pass OS commands via this variable used by the web application. Note, this developer configuration should not be deployed in production.

MultiTech Conduit MTCDT-LVW2-24XX 1.4.17-ocea-13592 devices allow remote authenticated administrators to execute arbitrary OS commands by navigating to the Debug Options page and entering shell metacharacters in the interface JSON field of the ping function.

An OS Command Injection vulnerability in the endpoint_devicemap.php component of Fonality Trixbox Community Edition allows an attacker to execute commands on the underlying operating system as the "asterisk" user. Note that Trixbox Community Edition has been unsupported by the vendor since 2012. This issue affects: Fonality Trixbox Community Edition, versions 1.2.0 through 2.8.0.4. Versions 1.0 and 1.1 are unaffected.

Cayin CMS suffers from an authenticated OS semi-blind command injection vulnerability using default credentials. This can be exploited to inject and execute arbitrary shell commands as the root user through the 'NTP_Server_IP' HTTP POST parameter in system.cgi page. This issue affects several branches and versions of the CMS application, including CME-SE, CMS-60, CMS-40, CMS-20, and CMS version 8.2, 8.0, and 7.5.

Comtech Stampede FX-1010 7.4.3 devices allow remote authenticated administrators to achieve remote code execution by navigating to the Diagnostics Trace Route page and entering shell metacharacters in the Target IP address field. (In some cases, authentication can be achieved with the comtech password for the comtech account.)

Comtech Stampede FX-1010 7.4.3 devices allow remote authenticated administrators to achieve remote code execution by navigating to the Poll Routes page and entering shell metacharacters in the Router IP Address field. (In some cases, authentication can be achieved with the comtech password for the comtech account.)

The EasyCorp ZenTao Pro application suffers from an OS command injection vulnerability in its '/pro/repo-create.html' component. After authenticating to the ZenTao dashboard, attackers may construct and send arbitrary OS commands via the POST parameter 'path', and those commands will run in an elevated SYSTEM context on the underlying Windows operating system.

Privilege escalation of an authenticated user to root in Citrix SD-WAN center versions before 11.2.2, 11.1.2b and 10.2.8.

Comtech Stampede FX-1010 7.4.3 devices allow remote authenticated administrators to achieve remote code execution by navigating to the Fetch URL page and entering shell metacharacters in the URL field. (In some cases, authentication can be achieved with the comtech password for the comtech account.)

ActiveX Control(HShell.dll) in Handy Groupware 1.7.3.1 for Windows 7, 8, and 10 allows an attacker to execute arbitrary command via the ShellExec method.