A privilege escalation issue was discovered in VyOS 1.1.8. The default configuration also allows operator users to execute the pppd binary with elevated (sudo) permissions. Certain input parameters are not properly validated. A malicious operator user can run the binary with elevated permissions and leverage its improper input validation condition to spawn an attacker-controlled shell with root privileges.

icewind1991 SMB before 1.0.3 allows remote authenticated users to execute arbitrary SMB commands via shell metacharacters in the user argument in the (1) listShares function in Server.php or the (2) connect or (3) read function in Share.php.

An issue was discovered on D-Link DIR-818LW devices with firmware 2.06betab01. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the Type field to SetWanSettings.

A vulnerability in the web-based management interface of Cisco Intersight Virtual Appliance could allow an authenticated, remote attacker to perform a command injection attack on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by using the web-based management interface to execute a command using crafted input. A successful exploit could allow the attacker to execute arbitrary commands using root-level privileges on an affected device.

An issue was discovered in Trend Micro InterScan Messaging Security (Virtual Appliance) 9.1-1600. An authenticated user can execute a terminal command in the context of the web server user (which is root). Besides, the default installation of IMSVA comes with default administrator credentials. The saveCert.imss endpoint takes several user inputs and performs blacklisting. After that, it uses them as arguments to a predefined operating-system command without proper sanitization. However, because of an improper blacklisting rule, it's possible to inject arbitrary commands into it.

An issue was discovered on D-Link DIR-823G devices with firmware 1.02B03. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the IPAddress or Gateway field to SetStaticRouteSettings.

A command injection vulnerability in UploadHandler.php in Vesta Control Panel 0.9.8-24 allows remote attackers to escalate from regular registered users to root.

EyesOfNetwork eonweb through 5.3-11 allows Remote Command Execution (by authenticated users) via shell metacharacters in the nagios_path parameter to lilac/export.php, as demonstrated by %26%26+curl to insert an "&& curl" substring for the shell.

Gerapy is a distributed crawler management framework. Prior to version 0.9.9, an authenticated user could execute arbitrary commands. This issue is fixed in version 0.9.9. There are no known workarounds.

In Weidmueller Industrial WLAN devices in multiple versions an exploitable command injection vulnerability exists in the iw_webs functionality. A specially crafted diagnostic script file name can cause user input to be reflected in a subsequent iw_system call, resulting in remote control over the device. An attacker can send commands while authenticated as a low privilege user to trigger this vulnerability.

In Weidmueller Industrial WLAN devices in multiple versions an exploitable command injection vulnerability exists in the hostname functionality. A specially crafted entry to network configuration information can cause execution of arbitrary system commands, resulting in full control of the device. An attacker can send various requests while authenticated as a high privilege user to trigger this vulnerability.

Citrix SD-WAN 10.2.x before 10.2.3 and NetScaler SD-WAN 10.0.x before 10.0.8 have Improper Input Validation (issue 6 of 6).

Citrix SD-WAN 10.2.x before 10.2.3 and NetScaler SD-WAN 10.0.x before 10.0.8 have Improper Input Validation (issue 5 of 6).

Zen Cart 1.5.7b allows admins to execute arbitrary OS commands by inspecting an HTML radio input element (within the modules edit page) and inserting a command.

A command injection vulnerability in MVISION EDR (MVEDR) prior to 3.4.0 allows an authenticated MVEDR administrator to trigger the EDR client to execute arbitrary commands through PowerShell using the EDR functionality 'execute reaction'.

A vulnerability has been found in Sangfor Operation and Maintenance Management System up to 3.0.8. This vulnerability affects the function uploadCN of the file VersionController.java. The manipulation of the argument filename leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

MyQ Server in MyQ X Smart before 8.2 allows remote code execution by unprivileged users because administrative session data can be read in the %PROGRAMFILES%\MyQ\PHP\Sessions directory. The "Select server file" feature is only intended for administrators but actually does not require authorization. An attacker can inject arbitrary OS commands (such as commands to create new .php files) via the Task Scheduler component.

An OS command injection vulnerability in the Palo Alto Networks PAN-OS web interface enables an authenticated administrator to execute arbitrary OS commands to escalate privileges. This issue impacts: PAN-OS 9.0 version 9.0.10 through PAN-OS 9.0.14; PAN-OS 9.1 version 9.1.4 through PAN-OS 9.1.10; PAN-OS 10.0 version 10.0.7 and earlier PAN-OS 10.0 versions; PAN-OS 10.1 version 10.1.0 through PAN-OS 10.1.1. Prisma Access firewalls and firewalls running PAN-OS 8.1 versions are not impacted by this issue.

An OS command injection vulnerability in the Palo Alto Networks PAN-OS command line interface (CLI) enables an authenticated administrator with access to the CLI to execute arbitrary OS commands to escalate privileges. This issue impacts: PAN-OS 8.1 versions earlier than PAN-OS 8.1.20-h1; PAN-OS 9.0 versions earlier than PAN-OS 9.0.14-h3; PAN-OS 9.1 versions earlier than PAN-OS 9.1.11-h2; PAN-OS 10.0 versions earlier than PAN-OS 10.0.8; PAN-OS 10.1 versions earlier than PAN-OS 10.1.3. Prisma Access customers that have Prisma Access 2.1 firewalls are impacted by this issue.

Git before 2.10.5, 2.11.x before 2.11.4, 2.12.x before 2.12.5, 2.13.x before 2.13.6, and 2.14.x before 2.14.2 uses unsafe Perl scripts to support subcommands such as cvsserver, which allows attackers to execute arbitrary OS commands via shell metacharacters in a module name. The vulnerable code is reachable via git-shell even without CVS support.

Dynacolor FCM-MB40 v1.2.0.0 devices allow remote attackers to execute arbitrary commands via a crafted parameter to a CGI script, as demonstrated by sed injection in cgi-bin/camctrl_save_profile.cgi (save parameter) and cgi-bin/ddns.cgi.

An issue was discovered on D-Link DIR-818LW devices with firmware 2.06betab01. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the MTU field to SetWanSettings.

An Improper Neutralization of Special Elements used in an OS Command issue was discovered in Digium Asterisk GUI 2.1.0 and prior. An OS command injection vulnerability has been identified that may allow the execution of arbitrary code on the system through the inclusion of OS commands in the URL request of the program.

An OS command injection vulnerability in the Palo Alto Networks PAN-OS web interface enables an authenticated administrator with permissions to use XML API the ability to execute arbitrary OS commands to escalate privileges. This issue impacts: PAN-OS 8.1 versions earlier than PAN-OS 8.1.20-h1; PAN-OS 9.0 versions earlier than PAN-OS 9.0.14-h3; PAN-OS 9.1 versions earlier than PAN-OS 9.1.11-h2; PAN-OS 10.0 versions earlier than PAN-OS 10.0.8; PAN-OS 10.1 versions earlier than PAN-OS 10.1.3. This issue does not impact Prisma Access firewalls.

Tenda PA6 Wi-Fi Powerline extender 1.0.1.21 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially crafted string, an attacker could modify the device name of an attached PLC adapter to inject and execute arbitrary commands on the system with root privileges.

A vulnerability in the WebUI of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject and execute arbitrary commands with vmanage user privileges on an affected system. The vulnerability is due to insufficient input validation of data parameters for certain fields in the affected solution. An attacker could exploit this vulnerability by configuring a malicious username on the login page of the affected solution. A successful exploit could allow the attacker to inject and execute arbitrary commands with vmanage user privileges on an affected system.

An issue was discovered in JetBrains TeamCity 2018.2.4. A TeamCity Project administrator could execute any command on the server machine. The issue was fixed in TeamCity 2018.2.5 and 2019.1.

A command injection (missing input validation) issue in the remote phonebook configuration URI in the web interface of the Atcom A10W VoIP phone with firmware 2.6.1a2421 allows an authenticated remote attacker in the same network to trigger OS commands via shell metacharacters in a POST request.

A vulnerability in the web UI of the Cisco Firepower Management Center (FMC) could allow an authenticated, remote attacker to inject arbitrary commands that are executed with the privileges of the root user of the underlying operating system. The vulnerability is due to insufficient validation of user-supplied input to the web UI. An attacker could exploit this vulnerability by submitting crafted input in the web UI. A successful exploit could allow an attacker to execute arbitrary commands on the device with full root privileges.

FusionPBX 4.4.8 allows an attacker to execute arbitrary system commands by submitting a malicious command to the service_edit.php file (which will insert the malicious command into the database). To trigger the command, one needs to call the services.php file via a GET request with the service id followed by the parameter a=start to execute the stored command.

A command injection vulnerability exists in the Zingbox Inspector versions 1.286 and earlier, that allows for an authenticated user to execute arbitrary system commands in the CLI.

app/backup/index.php in the Backup Module in FusionPBX 4.4.3 suffers from a command injection vulnerability due to a lack of input validation, which allows authenticated administrative attackers to execute commands on the host.

On Reolink RLC-410W, C1 Pro, C2 Pro, RLC-422W, and RLC-511W devices through 1.0.227, an authenticated admin can use the "TestEmail" functionality to inject and run OS commands as root, as demonstrated by shell metacharacters in the addr1 field.

The management console on the Brocade Vyatta 5400 vRouter 6.4R(x), 6.6R(x), and 6.7R1 allows remote authenticated users to execute arbitrary Linux commands via shell metacharacters in a console command.

ROOT version 6.9.03 and below is vulnerable to an authenticated shell metacharacter injection in the rootd daemon resulting in remote code execution

An issue was discovered in Poly (formerly Polycom) HDX 3.1.13. A feature exists that allows the creation of a server / client certificate, or the upload of the user certificate, on the administrator's page. The value received from the user is the factor value of a shell script on the equipment. By entering a special character (such as a single quote) in a CN or other CSR field, one can insert a command into a factor value. A system command can be executed as root.

Geutebruck IP Cameras G-Code(EEC-2xxx), G-Cam(EBC-21xx/EFD-22xx/ETHC-22xx/EWPC-22xx): All versions 1.12.0.25 and prior may allow a remote authenticated attacker with access to network configuration to supply system commands to the server, leading to remote code execution as root.

Improper neutralization of special elements used in an OS command in SYNO.Core.Network.PPPoE in Synology DiskStation Manager (DSM) before 6.2.3-25426-3 allows remote authenticated users to execute arbitrary code via realname parameter.

Hongdian H8922 3.0.5 devices allow OS command injection via shell metacharacters into the ip-address (aka Destination) field to the tools.cgi ping command, which is accessible with the username guest and password guest.

Multiple vulnerabilities in the web-based user interface (Web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to execute commands with elevated privileges on the affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A specially-crafted HTTP request can lead to arbitrary command execution in RSA keypasswd parameter. An attacker can make an authenticated HTTP request to trigger this vulnerability.

Blue Coat Advanced Secure Gateway (ASG) 6.6 before 6.6.5.4 and Content Analysis System (CAS) 1.3 before 1.3.7.4 are susceptible to an OS command injection vulnerability. An authenticated malicious administrator can execute arbitrary OS commands with elevated system privileges.

Multiple vulnerabilities in the web-based user interface (Web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to execute commands with elevated privileges on the affected device. For more information about these vulnerabilities, see the Details section of this advisory.

An issue was discovered in PRTG Network Monitor before 18.2.39. An attacker who has access to the PRTG System Administrator web console with administrative privileges can exploit an OS command injection vulnerability (both on the server and on devices) by sending malformed parameters in sensor or notification management scenarios.

Remote command execution (RCE) vulnerability in Nagios XI 5.2.x through 5.4.x before 5.4.13 allows an attacker to execute arbitrary commands on the target system, aka OS command injection.

Geutebruck IP Cameras G-Code(EEC-2xxx), G-Cam(EBC-21xx/EFD-22xx/ETHC-22xx/EWPC-22xx): All versions 1.12.0.25 and prior may allow a remote authenticated user, using a specially crafted URL command, to execute commands as root.

An issue was discovered in Softing uaGate SI 1.60.01. A CGI script is vulnerable to command injection with a maliciously crafted url parameter.

Magento versions 2.4.1 (and earlier), 2.4.0-p1 (and earlier) and 2.3.6 (and earlier) are vulnerable to OS command injection via the WebAPI. Successful exploitation could lead to remote code execution by an authenticated attacker. Access to the admin console is required for successful exploitation.

iBall iB-WRA150N 1.2.6 build 110401 Rel.47776n devices allow remote authenticated users to execute arbitrary OS commands via shell metacharacters in the ping test arguments on the Diagnostics page.

In app/Controller/ServersController.php in MISP 2.4.87, a server setting permitted the override of a path variable on certain Red Hed Enterprise Linux and CentOS systems (where rh_shell_fix was enabled), and consequently allowed site admins to inject arbitrary OS commands. The impact is limited by the setting being only accessible to the site administrator.