A vulnerability has been found in Wavlink NU516U1 M16U1_V240425. The affected element is the function sub_401778 of the file /cgi-bin/firewall.cgi. Such manipulation of the argument dmz_flag leads to command injection. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was found in D-Link DI-8100G, DI-8200G and DI-8003G 17.12.20A1/19.12.10A1. Affected by this issue is the function sub_433F7C of the file version_upgrade.asp of the component jhttpd. The manipulation of the argument path results in os command injection. The attack may be launched remotely. The exploit has been made public and could be used.
A flaw has been found in Wavlink NU516U1 M16U1_V240425. Impacted is the function sub_403010 of the file /cgi-bin/wireless.cgi of the component AddMac Page. This manipulation of the argument macAddr causes command injection. Remote exploitation of the attack is possible. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was identified in D-Link DIR-645 105B01. This issue affects the function soapcgi_main of the file /soap.cgi. Such manipulation of the argument service leads to command injection. The attack can be launched remotely. The exploit is publicly available and might be used. This vulnerability only affects products that are no longer supported by the maintainer.
A weakness has been identified in MiczFlor RPi-Jukebox-RFID up to 2.8.0. Affected by this vulnerability is an unknown functionality of the file /htdocs/api/playlist/shuffle.php. Executing manipulation of the argument playlist can lead to os command injection. The attack can be launched remotely. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way.
A flaw has been found in JD Cloud JDCOS 4.5.1.r4518. This vulnerability affects the function set_iptv_info of the file /jdcap of the component Service Interface. Executing a manipulation of the argument vid can lead to command injection. It is possible to launch the attack remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A weakness has been identified in Totolink A3300R 17.0.0cu.557_b20221024. This issue affects the function setUPnPCfg of the file /cgi-bin/cstecgi.cgi. This manipulation of the argument enable causes command injection. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks.
Watchguard XCS 9.2 and 10.0 before build 150522 allow remote authenticated users to execute arbitrary commands via shell metacharacters in the id parameter to ADMIN/mailqueue.spl.
rubygem-openshift-origin-console in Red Hat OpenShift 2.2 allows remote authenticated users to execute arbitrary commands via a crafted request to the Broker.
This command injection vulnerability allows attackers to execute arbitrary commands in a compromised application. QNAP have already fixed this vulnerability in the following versions of QTS and QuTS hero.
A vulnerability classified as critical was found in Tenda AC1206 up to 15.03.06.23. This vulnerability affects the function ate_iwpriv_set/ate_ifconfig_set of the file /goform/ate. The manipulation leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A security flaw has been discovered in efforthye fast-filesystem-mcp up to 3.5.1. The affected element is the function handleGetDiskUsage of the file src/index.ts. Performing a manipulation results in command injection. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.
A vulnerability has been found in Trendnet TEW-657BRM 1.00.1. Affected by this issue is the function vpn_drop of the file /setup.cgi. The manipulation of the argument policy_name leads to os command injection. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. The vendor confirms, that "[t]he product in question (...) has been discontinued and end of life since June 23, 2011, that is more than 14 years ago. We no longer provide support for this product, so we are not able to confirm the vulnerabilities. We will make an announcement on our website's product support page and notify customers who registered their products with us." This vulnerability only affects products that are no longer supported by the maintainer.
A vulnerability, which was classified as critical, has been found in TOTOLINK X18 9.1.0cu.2024_B20220329. Affected by this issue is some unknown functionality of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument enable leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.
Proxy command injection vulnerabilities in Trend Micro Mobile Security (Enterprise) versions before 9.7 Patch 3 allow remote attackers to execute arbitrary code on vulnerable installations.
A vulnerability in the command parameters of a certain AOS-CX CLI command could allow a low-privilege authenticated remote attacker to inject malicious commands resulting in unwanted behavior.
A vulnerability classified as critical was found in Totolink X2000R 1.0.0-B20221212.1452. Affected by this vulnerability is the function formMapDelDevice of the file /boafrm/formMapDelDevice. The manipulation of the argument macstr leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
IBM Security Identity Manager Virtual Appliance 6.0 and 7.0 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially-crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 127394.
An attacker with access to a Management Console user account with the editor role could escalate privileges through a command injection vulnerability in the Management Console. This vulnerability affected all versions of GitHub Enterprise Server and was fixed in versions 3.11.3, 3.10.5, 3.9.8, and 3.8.13 This vulnerability was reported via the GitHub Bug Bounty program.
A vulnerability was found in TRENDnet TEW-815DAP 1.0.2.0. It has been classified as critical. This affects the function do_setNTP of the component POST Request Handler. The manipulation of the argument NtpDstStart/NtpDstEnd leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-252123. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
Command injection vulnerability in EZ-Internet in Synology DiskStation Manager (DSM) before 6.2-23739 allows remote authenticated users to execute arbitrary command via the username parameter.
GoCD is a continuous delivery server. In GoCD versions prior to 22.1.0, it is possible for existing authenticated users who have permissions to edit or create pipeline materials or pipeline configuration repositories to get remote code execution capability on the GoCD server via configuring a malicious branch name which abuses Mercurial hooks/aliases to exploit a command injection weakness. An attacker would require access to an account with existing GoCD administration permissions to either create/edit (`hg`-based) configuration repositories; create/edit pipelines and their (`hg`-based) materials; or, where "pipelines-as-code" configuration repositories are used, to commit malicious configuration to such an external repository which will be automatically parsed into a pipeline configuration and (`hg`) material definition by the GoCD server. This issue is fixed in GoCD 22.1.0. As a workaround, users who do not use/rely upon Mercurial materials can uninstall/remove the `hg`/Mercurial binary from the underlying GoCD Server operating system or Docker image.
Command inject in transfer from another server in extplorer 2.1.9 and prior allows attacker to inject command via the userfile[0] parameter.
Proxy command injection vulnerability in Trend Micro InterScan Messaging Virtual Appliance 9.0 and 9.1 allows remote attackers to execute arbitrary code on vulnerable installations. The specific flaw can be exploited by parsing the "t" parameter within modTMCSS Proxy. Formerly ZDI-CAN-4744.
A vulnerability was detected in D-Link DI-7100G C1 24.04.18D1. Affected by this issue is the function set_jhttpd_info. Performing a manipulation of the argument usb_username results in command injection. Remote exploitation of the attack is possible.
A condition exists in FlashArray and FlashBlade Purity whereby a malicious user could execute arbitrary commands remotely through a specifically crafted SNMP configuration.
The [`tj-actions/verify-changed-files`](https://github.com/tj-actions/verify-changed-files) action allows for command injection in changed filenames, allowing an attacker to execute arbitrary code and potentially leak secrets. The [`verify-changed-files`](https://github.com/tj-actions/verify-changed-files) workflow returns the list of files changed within a workflow execution. This could potentially allow filenames that contain special characters such as `;` which can be used by an attacker to take over the [GitHub Runner](https://docs.github.com/en/actions/using-github-hosted-runners/about-github-hosted-runners) if the output value is used in a raw fashion (thus being directly replaced before execution) inside a `run` block. By running custom commands, an attacker may be able to steal secrets such as `GITHUB_TOKEN` if triggered on other events than `pull_request`. This has been patched in versions [17](https://github.com/tj-actions/verify-changed-files/releases/tag/v17) and [17.0.0](https://github.com/tj-actions/verify-changed-files/releases/tag/v17.0.0) by enabling `safe_output` by default and returning filename paths escaping special characters for bash environments.
A vulnerability was found in r-huijts xcode-mcp-server up to f3419f00117aa9949e326f78cc940166c88f18cb. This affects the function registerXcodeTools of the file src/tools/xcode/index.ts of the component run_lldb. The manipulation of the argument args results in command injection. It is possible to launch the attack remotely. The exploit has been made public and could be used. This product takes the approach of rolling releases to provide continious delivery. Therefore, version details for affected and updated releases are not available. The patch is identified as 11f8d6bacadd153beee649f92a78a9dad761f56f. Applying a patch is advised to resolve this issue.
An issue was discovered in Geomatika IsiGeo Web 6.0. It allows remote authenticated users to execute commands.
EMC Documentum D2 version 4.5 and EMC Documentum D2 version 4.6 has a DQL Injection Vulnerability that could potentially be exploited by malicious users to compromise the affected system. An authenticated low-privileged attacker could potentially exploit this vulnerability to access information, modify data or disrupt services by causing execution of arbitrary DQL commands on the application.
WeKnora is an LLM-powered framework designed for deep document understanding and semantic retrieval. Prior to version 0.2.5, there is a command injection vulnerability that allows authenticated users to inject stdio_config.command/args into MCP stdio settings, causing the server to execute subprocesses using these injected values. This issue has been patched in version 0.2.5.
The Pods – Custom Content Types and Fields plugin for WordPress is vulnerable to Remote Code Exxecution via shortcode in all versions up to, and including, 3.0.10 (with the exception of 2.7.31.2, 2.8.23.2, 2.9.19.2). This makes it possible for authenticated attackers, with contributor level access or higher, to execute code on the server.
An OS command injection vulnerability exists in the httpd wlscan_ASP functionality of InHand Networks InRouter302 V3.5.4. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.
An exploitable command execution vulnerability exists in Information Builders WebFOCUS Business Intelligence Portal 8.1 . A specially crafted web parameter can cause a command injection. An authenticated attacker can send a crafted web request to trigger this vulnerability.
An OS command injection vulnerability exists in the daretools binary functionality of InHand Networks InRouter302 V3.5.4. A specially-crafted network request can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger this vulnerability.
A vulnerability has been found in D-Link DWR-M921 1.1.50. This impacts an unknown function of the file /boafrm/formLtefotaUpgradeFibocom. Such manipulation of the argument fota_url leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.
An issue was discovered in Pivotal Greenplum before 4.3.10.0. Creation of external tables using GPHDFS protocol has a vulnerability whereby arbitrary commands can be injected into the system. In order to exploit this vulnerability the user must have superuser 'gpadmin' access to the system or have been granted GPHDFS protocol permissions in order to create a GPHDFS external table.
An issue was discovered on D-Link DCS-2530L before 1.06.01 Hotfix and DCS-2670L through 2.02 devices. cgi-bin/ddns_enc.cgi allows authenticated command injection.
Vulnerability in rconfig “remote_text_file” enables an attacker with user level access to the CLI to inject user level commands into Fidelis Network and Deception CommandPost, Collector, Sensor, and Sandbox components as well as neighboring Fidelis components. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.
If exploited, the command injection vulnerability could allow remote attackers to execute arbitrary commands. This issue affects: QNAP Systems Inc. QTS versions prior to 4.4.3.1421 on build 20200907.
xymond in Xymon 4.1.x, 4.2.x, and 4.3.x before 4.3.25 allow remote authenticated users to execute arbitrary commands via shell metacharacters in the adduser_name argument in (1) web/useradm.c or (2) web/chpasswd.c.
A vulnerability was determined in D-Link DCS-933L up to 1.14.11. This affects an unknown function of the file /setSystemAdmin of the component alphapd. This manipulation of the argument AdminID causes command injection. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. This vulnerability only affects products that are no longer supported by the maintainer.
IBM Resilient OnPrem 38.2 could allow a privileged user to inject malicious commands through Python3 scripting. IBM X-Force ID: 185503.
An issue was discovered in Relyum RELY-PCIe 22.2.1 and RELY-REC 23.1.0 devices, allowing authenticated command injection through the web interface.
An OS command injection vulnerability has been reported to affect Photo Station. If exploited, the vulnerability could allow authenticated users to execute commands via a network. We have already fixed the vulnerability in the following version: Photo Station 6.4.2 ( 2023/12/15 ) and later
The SQL Expressions experimental feature of Grafana allows for the evaluation of `duckdb` queries containing user input. These queries are insufficiently sanitized before being passed to `duckdb`, leading to a command injection and local file inclusion vulnerability. Any user with the VIEWER or higher permission is capable of executing this attack. The `duckdb` binary must be present in Grafana's $PATH for this attack to function; by default, this binary is not installed in Grafana distributions.
A flaw has been found in D-Link DI-7100G C1 24.04.18D1. This affects the function start_proxy_client_email. Executing a manipulation can lead to command injection. The attack can be executed remotely. The exploit has been published and may be used.
Vulnerability in Fidelis Network and Deception CommandPost enables authenticated command injection through the web interface using the “update_checkfile” value for the “filename” parameter. The vulnerability could allow a specially crafted HTTP request to execute system commands on the CommandPost and return results in an HTTP response via an authenticated session. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.
Synology Photo Station before 6.3-2958 allows remote authenticated guest users to execute arbitrary commands via shell metacharacters in the X-Forwarded-For HTTP header to photo/login.php.
Aztech WMB250AC Mesh Routers Firmware Version 016 2020 devices improperly manage sessions, which allows remote attackers to bypass authentication in opportunistic circumstances and execute arbitrary commands with administrator privileges by leveraging an existing web portal login.