An OS command injection vulnerability in FortiWeb's management interface 6.3.7 and below, 6.2.3 and below, 6.1.x, 6.0.x, 5.9.x may allow a remote authenticated attacker to execute arbitrary commands on the system via the SAML server configuration page.

IBM Spectrum Scale 4.2 and 5.0 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially-crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 172093.

On version 15.1.x before 15.1.0.5, 14.1.x before 14.1.3.1, 13.1.x before 13.1.3.5, and all versions of 12.1.x and 11.6.x, an authenticated remote command execution vulnerability exists in the BIG-IP Configuration utility. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

vSphere Replication 8.3.x prior to 8.3.1.2, 8.2.x prior to 8.2.1.1, 8.1.x prior to 8.1.2.3 and 6.5.x prior to 6.5.1.5 contain a post-authentication command injection vulnerability which may allow an authenticated admin user to perform a remote code execution.

Vesta Control Panel before 0.9.8-14 allows remote authenticated users to execute arbitrary commands via shell metacharacters in the backup parameter to list/backup/index.php.

Command Injection vulnerability in McAfee Enterprise Security Manager (ESM) prior to 11.2.0 and prior to 10.4.0 allows authenticated user to execute arbitrary code via specially crafted parameters.

XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.16, there is a vulnerability which may allow a remote attacker who has sufficient rights to execute commands of the host only by manipulating the processed input stream. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.16.

All versions up to V1.1.10P3T18 of ZTE ZXHN F670 product are impacted by command injection vulnerability. Due to insufficient parameter validation check, an authorized user can exploit this vulnerability to take control of user router system.

All versions up to UKBB_WF820+_1.0.0B06 of ZTE WF820+ LTE Outdoor CPE product are impacted by command injection vulnerability. Due to inadequate parameter verification, unauthorized users can take advantage of this vulnerability to control the user terminal system.

D-Link DIR-865L Ax 1.20B01 Beta devices allow Command Injection.

Prisma is an open source ORM for Node.js & TypeScript. As of today, we are not aware of any Prisma users or external consumers of the `@prisma/sdk` package who are affected by this security vulnerability. This issue may lead to remote code execution if a client of the library calls the vulnerable method with untrusted input. It only affects the `getPackedPackage` function and this function is not advertised and only used for tests & building our CLI, no malicious code was found after checking our codebase.

A vulnerability has been found in ajenti 2.1.31 and classified as critical. This vulnerability affects unknown code of the component API. The manipulation leads to privilege escalation. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 2.1.32 is able to address this issue. The name of the patch is 7aa146b724e0e20cfee2c71ca78fafbf53a8767c. It is recommended to upgrade the affected component.

Command Injection vulnerability in McAfee Enterprise Security Manager (ESM) prior to 11.2.0 and prior to 10.4.0 allows authenticated user to execute arbitrary code via specially crafted parameters.

Discord Recon Server is a bot that allows you to do your reconnaissance process from your Discord. Remote code execution in version 0.0.1 would allow remote users to execute commands on the server resulting in serious issues. This flaw is patched in 0.0.2.

In Fibaro Home Center 2 and Lite devices with firmware version 4.540 and older an authenticated user can run commands as root user using a command injection vulnerability.

A Remote Code Execution issue in the DNS Query Web UI in Lifesize Icon LS_RM3_3.7.0 (2421) allows remote authenticated attackers to execute arbitrary commands via a crafted DNS Query address field in a JSON API request.

Specially-crafted HTTP requests can lead to arbitrary command execution in PUT requests. An attacker can make authenticated HTTP requests to trigger this vulnerability.

Dell OpenManage Enterprise-Modular (OME-M) versions prior to 1.30.00 contain a security bypass vulnerability. An authenticated malicious user with low privileges may potentially exploit the vulnerability to escape from the restricted environment and gain access to sensitive information in the system, resulting in information disclosure and elevation of privilege.

An OS command injection vulnerability exists in the Web Manager FsUnmount functionality of Lantronix PremierWave 2050 8.9.0.0R4. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

Potential for arbitrary code execution in npm package @thi.ng/egf `#gpg`-tagged property values (only if `decrypt: true` option is enabled). PR with patch has been submitted and will has been released as of v0.4.0 By default the EGF parse functions do NOT attempt to decrypt values (since GPG only available in non-browser env). However, if GPG encrypted values are used/required: 1. Perform a regex search for `#gpg`-tagged values in the EGF source file/string and check for backtick (\`) chars in the encrypted value string 2. Replace/remove them or skip parsing if present.

In Nagios XI 5.6.9, an authenticated user is able to execute arbitrary OS commands via shell metacharacters in the id parameter to schedulereport.php, in the context of the web-server user account.

Specially-crafted HTTP requests can lead to arbitrary command execution in “GET” requests. An attacker can make authenticated HTTP requests to trigger this vulnerability.

DAP-1880AC firmware version 1.21 and earlier allows a remote authenticated attacker to execute arbitrary OS commands by sending a specially crafted request to a specific CGI program.

Trendnet AC2600 TEW-827DRU version 2.08B01 contains a command injection vulnerability in the smb functionality of the device. The username parameter used when configuring smb functionality for the device is vulnerable to command injection as root.

D-Link DIR-846 Firmware FW100A53DBR was discovered to contain a remote command execution (RCE) vulnerability via the lan(0)_dhcps_staticlist parameter. This vulnerability is exploited via a crafted POST request.

netflow_get_stats in functions_netflow.php in Pandora FMS 7.0NG allows remote authenticated users to execute arbitrary OS commands via shell metacharacters in the ip_src parameter in an index.php?operation/netflow/nf_live_view request. This issue has been fixed in Pandora FMS 7.0 NG 742.

A vulnerability in the SonicWall NSM On-Prem product allows an authenticated attacker to perform OS command injection using a crafted HTTP request. This vulnerability affects NSM On-Prem 2.2.0-R10 and earlier versions.

Hitachi Virtual File Platform Versions prior to 5.5.3-09 and Versions prior to 6.4.3-09, and NEC Storage M Series NAS Gateway Nh4a/Nh8a versions prior to FOS 5.5.3-08(NEC2.5.4a) and Nh4b/Nh8b, Nh4c/Nh8c versions prior to FOS 6.4.3-08(NEC3.4.2) allow remote authenticated attackers to execute arbitrary OS commands with root privileges via unspecified vectors.

A post-authentication remote command injection vulnerability in SonicWall SMA100 allows a remote authenticated attacker to execute OS system commands in the appliance. This vulnerability affected SMA 200, 210, 400, 410 and 500v appliances.

A vulnerability in the web-based management interface of Cisco Prime Infrastructure and Evolved Programmable Network (EPN) Manager could allow an authenticated, remote attacker to execute arbitrary commands on an affected system. The vulnerability is due to insufficient validation of user-supplied input to the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to the interface. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system (OS) with the permissions of a special non-root user. In this way, an attacker could take control of the affected system, which would allow them to obtain and alter sensitive data. The attacker could also affect the devices that are managed by the affected system by pushing arbitrary configuration files, retrieving device credentials and confidential information, and ultimately undermining the stability of the devices, causing a denial of service (DoS) condition.

A vulnerability in the Command Runner tool of Cisco DNA Center could allow an authenticated, remote attacker to perform a command injection attack. The vulnerability is due to insufficient input validation by the Command Runner tool. An attacker could exploit this vulnerability by providing crafted input during command execution or via a crafted command runner API call. A successful exploit could allow the attacker to execute arbitrary CLI commands on devices managed by Cisco DNA Center.

Multiple vulnerabilities in the web-based management interface of certain Cisco Small Business 100, 300, and 500 Series Wireless Access Points could allow an authenticated, remote attacker to obtain sensitive information from or inject arbitrary commands on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

BMC Control-M/Agent 7.0.00.000 allows OS Command Injection (issue 2 of 2).

A vulnerability has been found in Tenda AC10U 15.03.06.49 and classified as critical. This vulnerability affects the function formWriteFacMac of the file /goform/WriteFacMac. The manipulation of the argument mac leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-257458 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

BMC Control-M/Agent 7.0.00.000 allows OS Command Injection.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

On certain TOTOLINK Realtek SDK based routers, an authenticated attacker may execute arbitrary OS commands via the sysCmd parameter to the boafrm/formSysCmd URI, even if the GUI (syscmd.htm) is not available. This allows for full control over the device's internals. This affects A3002RU through 2.0.0, A702R through 2.1.3, N301RT through 2.1.6, N302R through 3.4.0, N300RT through 3.4.0, N200RE through 4.0.0, N150RT through 3.4.0, N100RE through 3.4.0, and N302RE 2.0.2.

Command Injection in minPlayCommand.php in Centreon (19.04.4 and below) allows an attacker to achieve command injection via a plugin test.

sa-exim 4.2.1 allows attackers to execute arbitrary code if they can write a .cf file or a rule. This occurs because Greylisting.pm relies on eval (rather than direct parsing and/or use of the taint feature). This issue is similar to CVE-2018-11805.

Zoho ManageEngine Asset Explorer 6.5 does not validate the System Center Configuration Manager (SCCM) database username when dynamically generating a command to schedule scans for SCCM. This allows an attacker to execute arbitrary commands on the AssetExplorer Server with NT AUTHORITY/SYSTEM privileges.

/usr/lib/lua/luci/controller/admin/autoupgrade.lua on PHICOMM K2(PSG1218) V22.5.9.163 devices allows remote authenticated users to execute any command via shell metacharacters in the cgi-bin/luci autoUpTime parameter.

On SuperMicro X8STi-F motherboards with IPMI firmware 2.06 and BIOS 02.68, the Virtual Media feature allows OS Command Injection by authenticated attackers who can send HTTP requests to the IPMI IP address. This requires a POST to /rpc/setvmdrive.asp with shell metacharacters in ShareHost or ShareName. The attacker can achieve a persistent backdoor.

A command injection vulnerability exists in EdgeSwitch firmware <v1.9.0 that allowed an authenticated read-only user to execute arbitrary shell commands over the HTTP interface, allowing them to escalate privileges.

Dell vApp Manager, versions prior to 9.2.4.9 contain a Command Injection Vulnerability. An authorized attacker could potentially exploit this vulnerability leading to an execution of an inserted command. Dell recommends customers to upgrade at the earliest opportunity.

Dell EMC prior to version DDOS 7.9 contain(s) an OS command injection Vulnerability. An authenticated non admin attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS, with the privileges of the vulnerable application.

Privilege escalation of an authenticated user to root in Citrix SD-WAN center versions before 11.2.2, 11.1.2b and 10.2.8.

We have recently released new version of UniFi Protect firmware v1.13.3 and v1.14.10 for Unifi Cloud Key Gen2 Plus and UniFi Dream Machine Pro/UNVR respectively that fixes vulnerabilities found on Protect firmware v1.13.2, v1.14.9 and prior according to the description below:View only users can run certain custom commands which allows them to assign themselves unauthorized roles and escalate their privileges.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges on an affected device. The vulnerability is due to insufficient validation of user-supplied input by the affected software. An attacker could exploit this vulnerability by invoking an interface monitoring mechanism with a crafted argument on the affected software. A successful exploit could allow the attacker to inject and execute arbitrary, system-level commands with root privileges on an affected device.

Netis WF2471 v1.2.30142 devices allow an authenticated attacker to execute arbitrary OS commands via shell metacharacters in the /cgi-bin-igd/sys_log_clean.cgi log_3g_type parameter.

Gocloud S2A_WL 4.2.7.16471, S2A 4.2.7.17278, S2A 4.3.0.15815, S2A 4.3.0.17193, S3A K2P MTK 4.2.7.16528, S3A 4.3.0.16572, and ISP3000 4.3.0.17190 devices allows remote attackers to execute arbitrary OS commands via shell metacharacters in a ping operation, as demonstrated by the cgi-bin/webui/admin/tools/app_ping/diag_ping/; substring.