Belkin LINKSYS RE6500 devices before 1.0.012.001 allow remote authenticated users to execute arbitrary commands via shell metacharacters in a filename to the upload_settings.cgi page.

A Command Injection issue in the traceroute feature on TP-Link TL-WR841N V13 (JP) with firmware versions prior to 201216 allows authenticated users to execute arbitrary code as root via shell metacharacters, a different vulnerability than CVE-2018-12577.

There is remote authenticated OS command injection on TP-Link Archer C20i 0.9.1 3.2 v003a.0 Build 170221 Rel.55462n devices vie the X_TP_ExternalIPv6Address HTTP parameter, allowing a remote attacker to run arbitrary commands on the router with root privileges.

Aterm W300P Ver1.0.13 and earlier allows attacker with administrator rights to execute arbitrary OS commands via sysCmd parameter.

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in StylemixThemes Consulting Elementor Widgets, StylemixThemes Masterstudy Elementor Widgets allows OS Command Injection.This issue affects Consulting Elementor Widgets: from n/a through 1.3.0; Masterstudy Elementor Widgets: from n/a through 1.2.2.

An issue in Datart v1.0.0-rc.3 allows attackers to execute arbitrary code via the url parameter in the JDBC configuration

A vulnerability has been found in Belkin F9K1122 1.00.33 and classified as critical. Affected by this vulnerability is the function formSetWanStatic of the file /goform/formSetWanStatic of the component webs. The manipulation of the argument m_wan_ipaddr/m_wan_netmask/m_wan_gateway/m_wan_staticdns1/m_wan_staticdns2 is directly passed by the attacker/so we can control the m_wan_ipaddr/m_wan_netmask/m_wan_gateway/m_wan_staticdns1/m_wan_staticdns2 leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary OS commands via filename parameter.

A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Series Routers could allow an authenticated, remote attacker to inject arbitrary shell commands that are executed by an affected device. The vulnerability is due to insufficient input validation of user-supplied data. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary shell commands or scripts with root privileges on the affected device.

A vulnerability in the Device Manager application of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to inject arbitrary commands on the affected device. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending crafted arguments to a specific field within the application. A successful exploit could allow the attacker to run commands as the administrator on the DCNM.

A vulnerability was found in Belkin F9K1122 1.00.33 and classified as critical. Affected by this issue is the function formBSSetSitesurvey of the file /goform/formBSSetSitesurvey of the component webs. The manipulation of the argument wan_ipaddr/wan_netmask/wan_gateway/wl_ssid is directly passed by the attacker/so we can control the wan_ipaddr/wan_netmask/wan_gateway/wl_ssid leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in Netgear D6400 1.0.0.114. This affects an unknown part of the file diag.cgi. The manipulation of the argument host_name leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early and confirmed the existence of the vulnerability. They reacted very quickly, professional and kind. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to execute arbitrary commands with root privileges on the underlying operating system of an affected device. The vulnerability is due to improper input sanitization. An attacker who has valid administrative access to an affected device could exploit this vulnerability by supplying a crafted input parameter on a form in the web UI and then submitting that form. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the device, which could lead to complete system compromise.

A vulnerability, which was classified as critical, was found in D-Link DI-7300G+ and DI-8200G 17.12.20A1/19.12.25A1. This affects an unknown part of the file msp_info.htm. The manipulation of the argument flag/cmd/iface leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

In QuickBox Pro v2.5.8 and below, the config.php file has a variable which takes a GET parameter value and parses it into a shell_exec(''); function without properly sanitizing any shell arguments, therefore remote code execution is possible. Additionally, as the media server is running as root by default attackers can use the sudo command within this shell_exec(''); function, which allows for privilege escalation by means of RCE.

RAGFlow is an open-source RAG (Retrieval-Augmented Generation) engine. In versions prior to 0.23.0, a low-privileged authenticated user (normal login account) can execute arbitrary system commands on the server host process via the frontend Canvas CodeExec component, completely bypassing sandbox isolation. This occurs because untrusted data (stdout) is parsed using eval() with no filtering or sandboxing. The intended design was to "automatically convert string results into Python objects," but this effectively executes attacker-controlled code. Additional endpoints lack access control or contain inverted permission logic, significantly expanding the attack surface and enabling chained exploitation. Version 0.23.0 contains a patch for the issue.

A vulnerability in the error reporting feature of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to gain elevated privileges on an affected device. The vulnerability is due to a failure to properly validate certain parameters included within the error reporting application configuration. An attacker could exploit this vulnerability by sending a crafted command to the error reporting feature. A successful exploit could allow the attacker to gain root-level privileges and take full control of the device.

A vulnerability classified as critical has been found in D-Link DI-7300G+ 19.12.25A1. Affected is an unknown function of the file wget_test.asp. The manipulation of the argument url leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability in role-based access control (RBAC) for Cisco NX-OS Software could allow an authenticated, remote attacker to execute CLI commands that should be restricted for a nonadministrative user. The attacker would have to possess valid user credentials for the device. The vulnerability is due to incorrect RBAC privilege assignment for certain CLI commands. An attacker could exploit this vulnerability by authenticating to a device as a nonadministrative user and executing specific commands from the CLI. An exploit could allow the attacker to run commands that should be restricted to administrative users. These commands could modify the configuration or boot image on the device. This vulnerability affects MDS 9000 Series Multilayer Switches, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvd77904.

A vulnerability, which was classified as critical, has been found in D-Link DI-7300G+ 19.12.25A1. Affected by this issue is some unknown functionality of the file in proxy_client.asp. The manipulation of the argument proxy_srv/proxy_lanport/proxy_lanip/proxy_srvport leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary OS commands via FactoryPassword parameter of a certain URL, different URL from CVE-2018-0634.

OpenEMR version 5.0.0 contains a OS Command Injection vulnerability in fax_dispatch.php that can result in OS command injection by an authenticated attacker with any role. This vulnerability appears to have been fixed in 5.0.0 Patch 2 or higher.

GLPI is an open source IT Asset Management, issue tracking system and service desk system. The GLPI addressing plugin in versions < 2.9.1 suffers from authenticated Remote Code Execution vulnerability, allowing access to the server's underlying operating system using command injection abuse of functionality. There is no workaround for this issue and users are advised to upgrade or to disable the addressing plugin.

The CGI implementation on Cisco TelePresence endpoint devices with software 1.2.x through 1.5.x allows remote authenticated users to execute arbitrary commands via a malformed request, related to "command injection vulnerabilities," aka Bug ID CSCtb31659.

Command injection vulnerability in date of QNAP Q'center Virtual Appliance version 1.7.1063 and earlier could allow authenticated users to run arbitrary commands.

operation/agentes/networkmap.php in Pandora FMS before 3.1.1 allows remote authenticated users to execute arbitrary commands via shell metacharacters in the layout parameter in an operation/agentes/networkmap action to index.php.

An issue was discovered on Victure WR1200 devices through 1.0.3. A command injection vulnerability was found within the web interface of the device, allowing an attacker with valid credentials to inject arbitrary shell commands to be executed by the device with root privileges. This occurs in the ping and traceroute features. An attacker would thus be able to use this vulnerability to open a reverse shell on the device with root privileges.

Aterm WG1200HP firmware Ver1.0.31 and earlier allows attacker with administrator rights to execute arbitrary OS commands via targetAPSsid parameter.

Improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability in mail sending and receiving component in Synology Mail Station before 20211105-10315 allows remote authenticated users to execute arbitrary commands via unspecified vectors.

A Command Injection vulnerability in httpd web server (setup.cgi) in SerComm h500s, FW: lowi-h500s-v3.4.22 allows logged in administrators to arbitrary OS commands as root in the device via the connection_type parameter of the statussupport_diagnostic_tracing.json endpoint.

Gerapy is a distributed crawler management framework. Gerapy prior to version 0.9.8 is vulnerable to remote code execution, and this issue is patched in version 0.9.8.

mySCADA myPRO versions 8.26.0 and prior has parameters which an authenticated user could exploit to inject arbitrary operating system commands.

mySCADA myPRO versions 8.26.0 and prior has parameters which an authenticated user could exploit to inject arbitrary operating system commands.

An authenticated command injection vulnerability in Weintek cMT2078X easyweb Web Version v2.1.3, OS v20220215 allows attackers to execute arbitrary code or access sensitive information via injecting a crafted payload into the HMI Name parameter.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWeb version 6.4.1 and 6.4.0, version 6.3.15 and below, version 6.2.6 and below allows attacker to execute unauthorized code or commands via crafted HTTP requests.

A vulnerability was found in Sapido BR270n, BRC76n, GR297 and RB1732 and classified as critical. Affected by this issue is some unknown functionality of the file ip/syscmd.htm. The manipulation leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-214592.

MitraStar GPT-2541GNAC-N1 (HGU) 100VNZ0b33 devices allow remote authenticated users to obtain root access by executing command "deviceinfo show file &&/bin/bash" because of incorrect sanitization of parameter "path".

An issue discovered in TenghuTOS TWS-200 firmware version:V4.0-201809201424 allows a remote attacker to execute arbitrary code via crafted command on the ping page component.

A shell command injection in the HW Events SNMP community in XoruX LPAR2RRD and STOR2RRD before 7.30 allows authenticated remote attackers to execute arbitrary shell commands as the user running the service.

A Remote Code Execution (RCE) vulnerability exists in Ruijie Networks Ruijie RG-EW Series Routers up to ReyeeOS 1.55.1915 / EW_3.0(1)B11P55 via the updateVersion function in /cgi-bin/luci/api/wireless.

FiberHome ONU GPON AN5506-04-F RP2617 is affected by an OS command injection vulnerability. This vulnerability allows the attacker, once logged in, to send commands to the operating system as the root user via the ping diagnostic tool, bypassing the IP address field, and concatenating OS commands with a semicolon.

A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, Cisco RV130W Wireless-N Multifunction VPN Router, and Cisco RV215W Wireless-N VPN Router could allow an authenticated, remote attacker to execute arbitrary commands. The vulnerability is due to improper validation of user-supplied input to scripts by the web-based management interface. An attacker could exploit this vulnerability by sending malicious requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary commands with the privileges of the root user.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWLM version 8.6.2 and below, version 8.5.2 and below, version 8.4.2 and below, version 8.3.2 and below allows attacker to execute unauthorized code or commands via crafted HTTP requests to the alarm dashboard and controller config handlers.

ZeroShell 3.9.5 has a command injection vulnerability in /cgi-bin/kerbynet IP parameter, which may allow an authenticated attacker to execute system commands.

The affected product is vulnerable to a parameter injection via passphrase, which enables the attacker to supply uncontrolled input.

Aterm WG1200HP firmware Ver1.0.31 and earlier allows attacker with administrator rights to execute arbitrary OS commands via sysCmd in formWsc parameter.

Aterm WG1200HP firmware Ver1.0.31 and earlier allows attacker with administrator rights to execute arbitrary OS commands via formSysCmd parameter.

The Device42 Remote Collector before 17.05.01 does not sanitize user input in its SNMP Connectivity utility. This allows an authenticated attacker (with access to the console application) to execute arbitrary OS commands and escalate privileges.

TP-Link wifi router TL-WR802N V4(JP), with firmware version prior to 211202, is vulnerable to OS command injection.

kustomize-controller is a Kubernetes operator, specialized in running continuous delivery pipelines for infrastructure and workloads defined with Kubernetes manifests and assembled with Kustomize. Users that can create Kubernetes Secrets, Service Accounts and Flux Kustomization objects, could execute commands inside the kustomize-controller container by embedding a shell script in a Kubernetes Secret. This can be used to run `kubectl` commands under the Service Account of kustomize-controller, thus allowing an authenticated Kubernetes user to gain cluster admin privileges. In affected versions multitenant environments where non-admin users have permissions to create Flux Kustomization objects are affected by this issue. This vulnerability was fixed in kustomize-controller v0.15.0 (included in flux2 v0.18.0) released on 2021-10-08. Starting with v0.15, the kustomize-controller no longer executes shell commands on the container OS and the `kubectl` binary has been removed from the container image. To prevent the creation of Kubernetes Service Accounts with `secrets` in namespaces owned by tenants, a Kubernetes validation webhook such as Gatekeeper OPA or Kyverno can be used.