A vulnerability classified as critical was found in Tenda AC6 15.03.05.16. Affected by this vulnerability is the function formSetSafeWanWebMan of the file /goform/SetRemoteWebCfg. The manipulation of the argument remoteIp leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was found in Netgear EX3700 up to 1.0.0.88. It has been classified as critical. Affected is the function sub_41619C of the file /mtd. The manipulation leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.0.0.98 is able to address this issue. It is recommended to upgrade the affected component. This vulnerability only affects products that are no longer supported by the maintainer.
A vulnerability was found in Tenda AC5 15.03.06.47. It has been classified as critical. Affected is the function formSetRebootTimer of the file /goform/SetRebootTimer. The manipulation of the argument rebootTime leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.
A vulnerability classified as critical has been found in Tenda FH1201 1.2.0.14(408). This affects an unknown part of the file /goform/SafeMacFilter. The manipulation of the argument page leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.
An exploitable remote code execution vulnerability exists in the ping and tracert functionality of the TP-Link TL-R600VPN HWv3 FRNv1.3.0 and HWv2 FRNv1.2.3 http server. A specially crafted IP address can cause a stack overflow, resulting in remote code execution. An attacker can send a single authenticated HTTP request to trigger this vulnerability.
Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects D6100 before 1.0.0.57, R6100 before 1.0.1.20, R7500 before 1.0.0.122, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WNDR3700v4 before 1.0.2.92, WNDR4300 before 1.0.2.94, WNDR4300v2 before 1.0.0.50, WNDR4500v3 before 1.0.0.50, and WNR2000v5 before 1.0.0.62.
In modem protocol, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01240012; Issue ID: MSV-1215.
Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects R6700 before 1.0.1.48, R7500 before 1.0.0.124, R7800 before 1.0.2.58, R8900 before 1.0.4.2, R9000 before 1.0.4.2, WNDR3700v4 before 1.0.2.102, WNDR4300v1 before 1.0.2.104, WNDR4300v2 before 1.0.0.56, WNDR4500v3 before 1.0.0.56, and WNR2000v5-R2000 before 1.0.0.68.
Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects D6100 before 1.0.0.57, R7500 before 1.0.0.122, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WNDR3700v4 before 1.0.2.92, WNDR4300 before 1.0.2.94, WNDR4300v2 before 1.0.0.50, WNDR4500v3 before 1.0.0.50, and WNR2000v5 before 1.0.0.62.
Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects DGN2200Bv4 before 1.0.0.102, DGN2200v4 before 1.0.0.102, EX3700 before 1.0.0.70, EX3800 before 1.0.0.70, EX6000 before 1.0.0.30, EX6100 before 1.0.2.22, EX6120 before 1.0.0.40, EX6130 before 1.0.0.22, EX6150 before 1.0.0.38, EX6200 before 1.0.3.86, EX7000 before 1.0.0.64, R6300v2 before 1.0.4.22, R6900P before 1.3.0.18, R7000P before 1.3.0.18, R7300DST before 1.0.0.62, R7900P before 1.3.0.10, R8000 before 1.0.4.12, R8000P before 1.3.0.10, WN2500RPv2 before 1.0.1.52, and WNDR3400v3 before 1.0.1.18.
A vulnerability, which was classified as critical, was found in Tenda CH22 1.0.0.1. This affects the function formNatlimit of the file /goform/Natlimit. The manipulation of the argument page leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was found in Tenda RX3 16.03.13.11_multi_TDE01. It has been rated as critical. This issue affects the function save_staticroute_data of the file /goform/SetStaticRouteCfg. The manipulation of the argument list leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.
Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects D6100 before 1.0.0.57, R6100 before 1.0.1.20, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WNDR3700v4 before 1.0.2.92, WNDR4300 before 1.0.2.94, WNDR4300v2 before 1.0.0.50, WNDR4500v3 before 1.0.0.50, and WNR2000v5 before 1.0.0.62.
A stack-based buffer overflow vulnerability exists in the Web Manager FsUnmount functionality of Lantronix PremierWave 2050 8.9.0.0R4 (in QEMU). A specially crafted HTTP request can lead to remote code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.
A stack-based buffer overflow vulnerability exists in the CMA check_udp_crc function of Garrett Metal Detectors’ iC Module CMA Version 5.0. A specially-crafted packet can lead to a stack-based buffer overflow during a call to memcpy. An attacker can send a malicious packet to trigger this vulnerability.
A stack-based buffer overflow vulnerability exists in the Web Manager FsBrowseClean functionality of Lantronix PremierWave 2050 8.9.0.0R4 (in QEMU). A specially crafted HTTP request can lead to remote code execution in the vulnerable portion of the branch (deletedir). An attacker can make an authenticated HTTP request to trigger this vulnerability.
A stack-based buffer overflow vulnerability exists in the Web Manager FsBrowseClean functionality of Lantronix PremierWave 2050 8.9.0.0R4 (in QEMU). A specially crafted HTTP request can lead to remote code execution in the vulnerable portion of the branch (deletefile). An attacker can make an authenticated HTTP request to trigger this vulnerability.
A vulnerability, which was classified as critical, has been found in TOTOLINK X15 1.0.0-B20230714.1105. Affected by this issue is the function formMapReboot of the file /boafrm/formMapReboot. The manipulation of the argument deviceMacAddr leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A stack-based buffer overflow vulnerability exists in the Web Manager SslGenerateCSR functionality of Lantronix PremierWave 2050 8.9.0.0R4 (in QEMU). A specially crafted HTTP request can lead to remote code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.
A stack-based buffer overflow vulnerability exists in the Web Manager Ping functionality of Lantronix PremierWave 2050 8.9.0.0R4 (in QEMU). A specially crafted HTTP request can lead to remote code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.
A Stack-based buffer overflow in the SonicOS SessionID HTTP response header allows a remote authenticated attacker to cause Denial of Service (DoS) and potentially results in code execution in the firewall. This vulnerability affected SonicOS Gen 5, Gen 6 and Gen 7 firmware versions.
A vulnerability, which was classified as critical, has been found in Tenda CH22 1.0.0.1. This issue affects the function formaddUserName of the file /goform/addUserName. The manipulation of the argument Password leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.
A Stack-based buffer overflow in the SonicOS HTTP Content-Length response header allows a remote authenticated attacker to cause Denial of Service (DoS) and potentially results in code execution in the firewall. This vulnerability affected SonicOS Gen 5, Gen 6 and Gen 7 firmware versions.
A vulnerability was found in D-Link DCS-932L 2.18.01. It has been declared as critical. Affected by this vulnerability is the function setSystemEmail of the file /setSystemEmail. The manipulation of the argument EmailSMTPPortNumber leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
A vulnerability classified as critical has been found in D-Link DCS-5020L 1.01_B2. This affects the function websReadEvent of the file /rame/ptdc.cgi. The manipulation of the argument Authorization leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
A vulnerability classified as critical has been found in Tenda FH451 1.0.0.9. Affected is the function webExcptypemanFilter of the file /goform/webExcptypemanFilter. The manipulation of the argument page leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.
Multiple stack buffer overflow vulnerabilities in Jensen of Scandinavia AS Air:Link 3G (AL3G) version 2.23m (Rev. 3), Air:Link 5000AC (AL5000AC) version 1.13, and Air:Link 59300 (AL59300) version 1.04 (Rev. 4) devices allow remote attackers to execute arbitrary code or crash the web service via the (1) ateFunc, (2) ateGain, (3) ateTxCount, (4) ateChan, (5) ateRate, (6) ateMacID, (7) e2pTxPower1, (8) e2pTxPower2, (9) e2pTxPower3, (10) e2pTxPower4, (11) e2pTxPower5, (12) e2pTxPower6, (13) e2pTxPower7, (14) e2pTx2Power1, (15) e2pTx2Power2, (16) e2pTx2Power3, (17) e2pTx2Power4, (18) e2pTx2Power5, (19) e2pTx2Power6, (20) e2pTx2Power7, (21) ateTxFreqOffset, (22) ateMode, (23) ateBW, (24) ateAntenna, (25) e2pTxFreqOffset, (26) e2pTxPwDeltaB, (27) e2pTxPwDeltaG, (28) e2pTxPwDeltaMix, (29) e2pTxPwDeltaN, and (30) readE2P parameters of the /goform/formWlanMP endpoint.
Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects D7800 before 1.0.1.28, EX2700 before 1.0.1.32, EX6200v2 before 1.0.1.56, R7500v2 before 1.0.3.24, R7800 before 1.0.2.40, R9000 before 1.0.3.6, WN2000RPTv3 before 1.0.1.20, WN3000RPv3 before 1.0.2.52, WN3100RPv2 before 1.0.0.42, WNDR3700v4 before 1.0.2.92, WNDR4300 before 1.0.2.94, WNDR4300v2 before 1.0.0.50, WNDR4500v3 before 1.0.0.50, and WNR2000v5 before 1.0.0.62.
A vulnerability was found in Tenda AC8 16.03.34.09 and classified as critical. Affected by this issue is the function route_static_check of the file /goform/SetStaticRouteCfg. The manipulation of the argument list leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.
A vulnerability, which was classified as critical, was found in TP-Link VN020 F3v(T) TT_V6.2.1021. This affects an unknown part of the component FTP USER Command Handler. The manipulation leads to memory corruption. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was found in Tenda AC15 15.03.05.19 and classified as critical. This issue affects the function formSetDeviceName of the file /goform/SetOnlineDevName. The manipulation of the argument devName leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was found in Tenda AC6 15.03.05.19 and classified as critical. Affected by this issue is the function formSetDeviceName of the file /goform/SetOnlineDevName. The manipulation of the argument devName leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was found in Tenda AC7 15.03.06.44. It has been declared as critical. Affected by this vulnerability is the function formSetRebootTimer of the file /goform/SetRebootTimer. The manipulation of the argument reboot_time leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.
A vulnerability has been found in Tenda AC15 15.03.05.19 and classified as critical. This vulnerability affects the function SetDlnaCfg of the file /goform/SetDlnaCfg. The manipulation of the argument scanList leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was found in Tenda W9 1.0.0.7(4456). It has been declared as critical. Affected by this vulnerability is the function formAddSysLogRule of the component httpd. The manipulation of the argument sysRulenEn leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-250711. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was found in D-Link DCS-932L 2.18.01. It has been declared as critical. This vulnerability affects the function isUCPCameraNameChanged of the file /sbin/ucp. The manipulation of the argument CameraName leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
A vulnerability was found in Tenda RX9 Pro 22.03.02.20. It has been rated as critical. This issue affects the function sub_424CE0 of the file /goform/setMacFilterCfg of the component POST Request Handler. The manipulation of the argument deviceList leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was found in Tenda AC1206 up to 20241027. It has been classified as critical. This affects the function ate_Tenda_mfg_check_usb/ate_Tenda_mfg_check_usb3 of the file /goform/ate. The manipulation of the argument arg leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was found in Tenda W9 1.0.0.7(4456). It has been classified as critical. Affected is the function formOfflineSet of the component httpd. The manipulation of the argument ssidIndex leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-250710 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was found in Tenda W9 1.0.0.7(4456) and classified as critical. This issue affects the function formQosManage_user of the component httpd. The manipulation of the argument ssidIndex leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-250709 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was found in D-Link DCS-932L 2.18.01 and classified as critical. Affected by this issue is the function sub_404780 of the file /bin/gpio. The manipulation of the argument CameraName leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
A vulnerability classified as critical has been found in Tenda RX9 and RX9 Pro 22.03.02.10/22.03.02.20. Affected is the function sub_42EEE0 of the file /goform/SetStaticRouteCfg. The manipulation of the argument list leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was found in Tenda W9 1.0.0.7(4456). It has been rated as critical. Affected by this issue is the function formWifiMacFilterGet of the component httpd. The manipulation of the argument index leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-250712. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability, which was classified as critical, has been found in Tenda RX9 and RX9 Pro 22.03.02.20. Affected by this issue is the function sub_4337EC of the file /goform/SetNetControlList. The manipulation of the argument list leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.
fmwlan.c on D-Link DIR-615Jx10 devices has a stack-based buffer overflow via the formWlanSetup_Wizard webpage parameter when f_radius_ip1 is malformed.
A vulnerability, which was classified as critical, has been found in Tenda W9 1.0.0.7(4456). Affected by this issue is the function setWrlAccessList of the component httpd. The manipulation of the argument ssidIndex leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-250706 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
TOTOLINK NR1800X V9.1.0u.6279_B20210910 was discovered to contain an authenticated stack overflow via the week, sTime, and eTime parameters in the setParentalRules function.
A vulnerability has been found in Tenda W9 1.0.0.7(4456) and classified as critical. This vulnerability affects the function formQosManage_auto of the component httpd. The manipulation of the argument ssidIndex leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-250708. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
fmwlan.c on D-Link DIR-615Jx10 devices has a stack-based buffer overflow via the formWlanSetup webpage parameter when f_radius_ip1 is malformed.
An issue was discovered on D-Link DSL-2640B B2 EU_4.01B devices. The function do_cgi(), which processes cgi requests supplied to the device's web servers, is vulnerable to a remotely exploitable stack-based buffer overflow. Unauthenticated exploitation is possible by combining this vulnerability with CVE-2020-9277.