Cisco ACE 4710 Application Control Engine Appliance before A1(8a) uses default (1) usernames and (2) passwords for (a) the administrator, (b) web management, and (c) device management, which makes it easier for remote attackers to perform configuration changes to the Device Manager and other components, or obtain operating-system access.

Cisco ACE Application Control Engine Module for Catalyst 6500 Switches and 7600 Routers before A2(1.1) uses default (1) usernames and (2) passwords for (a) the administrator and (b) web management, which makes it easier for remote attackers to perform configuration changes or obtain operating-system access.

A vulnerability in Cisco Emergency Responder could allow an unauthenticated, remote attacker to log in to an affected device using the root account, which has default, static credentials that cannot be changed or deleted. This vulnerability is due to the presence of static user credentials for the root account that are typically reserved for use during development. An attacker could exploit this vulnerability by using the account to log in to an affected system. A successful exploit could allow the attacker to log in to the affected system and execute arbitrary commands as the root user.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Cisco Umbrella Secure Web Gateway service could allow an unauthenticated, remote attacker to bypass the file inspection feature. This vulnerability is due to insufficient restrictions in the file inspection feature. An attacker could exploit this vulnerability by downloading a crafted payload through specific methods. A successful exploit could allow the attacker to bypass file inspection protections and download a malicious payload.

Multiple vulnerabilities in the web-based user interface of certain Cisco Small Business Series Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or execute arbitrary code with root privileges on an affected device. These vulnerabilities are due to improper validation of requests that are sent to the web interface. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the REST API of the web-based user interface (web UI) of Cisco IOS XE 3.1 through 16.5 could allow an unauthenticated, remote attacker to bypass authentication to the REST API of the web UI of the affected software. The vulnerability is due to insufficient input validation for the REST API of the affected software. An attacker could exploit this vulnerability by sending a malicious API request to an affected device. A successful exploit could allow the attacker to bypass authentication and gain access to the web UI of the affected software. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration UI was introduced in the Denali 16.2 Release of Cisco IOS XE Software. This vulnerability does not affect the web-based administration UI in earlier releases of Cisco IOS XE Software. Cisco Bug IDs: CSCuz46036.

A vulnerability in the implementation of the Locator/ID Separation Protocol (LISP) in Cisco IOS XE 3.2 through 16.5 could allow an unauthenticated, remote attacker using an x tunnel router to bypass authentication checks performed when registering an Endpoint Identifier (EID) to a Routing Locator (RLOC) in the map server/map resolver (MS/MR). The vulnerability is due to a logic error introduced via a code regression for the affected software. An attacker could exploit this vulnerability by sending specific valid map-registration requests, which will be accepted by the MS/MR even if the authentication keys do not match, to the affected software. A successful exploit could allow the attacker to inject invalid mappings of EIDs to RLOCs in the MS/MR of the affected software. This vulnerability affects Cisco devices that are configured with LISP acting as an IPv4 or IPv6 map server. This vulnerability affects Cisco IOS XE Software release trains 3.9E and Everest 16.4. Cisco Bug IDs: CSCvc18008.

A vulnerability in the Security Assertion Markup Language (SAML) APIs of Cisco Catalyst SD-WAN Manager Software could allow an unauthenticated, remote attacker to gain unauthorized access to the application as an arbitrary user. This vulnerability is due to improper authentication checks for SAML APIs. An attacker could exploit this vulnerability by sending requests directly to the SAML API. A successful exploit could allow the attacker to generate an authorization token sufficient to gain access to the application.

On Cisco DDR2200 ADSL2+ Residential Gateway DDR2200B-NA-AnnexA-FCC-V00.00.03.45.4E and DDR2201v1 ADSL2+ Residential Gateway DDR2201v1-NA-AnnexA-FCC-V00.00.03.28.3 devices, there is remote command execution via shell metacharacters in the pingAddr parameter to the waitPingqry.cgi URI. The command output is visible at /PingMsg.cmd.

Technicolor DPC3928AD DOCSIS devices allow remote attackers to read arbitrary files via a request starting with "GET /../" on TCP port 4321.

The Cisco Linksys WVC54GC wireless video camera before firmware 1.25 sends cleartext configuration data in response to a Setup Wizard remote-management command, which allows remote attackers to obtain sensitive information such as passwords by sniffing the network.

A vulnerability in the REST API of Cisco IoT Field Network Director (FND) could allow an unauthenticated, remote attacker to access the back-end database of an affected system. The vulnerability exists because the affected software does not properly authenticate REST API calls. An attacker could exploit this vulnerability by obtaining a cross-site request forgery (CSRF) token and then using the token with REST API requests. A successful exploit could allow the attacker to access the back-end database of the affected device and read, alter, or drop information.

A vulnerability in the Docker Engine configuration of Cisco CloudCenter Orchestrator (CCO; formerly CliQr) could allow an unauthenticated, remote attacker to install Docker containers with high privileges on the affected system. Affected Products: This vulnerability affect all releases of Cisco CloudCenter Orchestrator (CCO) deployments where the Docker Engine TCP port 2375 is open on the system and bound to local address 0.0.0.0 (any interface).

The Cisco Linksys WRT350N with firmware 1.0.3.7 has "admin" as its default password for the "admin" account, which makes it easier for remote attackers to obtain access.

A vulnerability in the web-based graphical user interface (GUI) of Cisco Prime Home could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. Cisco Prime Home versions 5.1.1.6 and earlier and 5.2.2.2 and earlier have been confirmed to be vulnerable. Cisco Prime Home versions 6.0 and later are not vulnerable. More Information: CSCvb71732. Known Affected Releases: 5.0 5.0(1) 5.0(1.1) 5.0(1.2) 5.0(2) 5.15.1(0) 5.1(1) 5.1(1.3) 5.1(1.4) 5.1(1.5) 5.1(1.6) 5.1(2) 5.1(2.1) 5.1(2.3) 5.25.2(0.1) 5.2(1.0) 5.2(1.2) 5.2(2.0) 5.2(2.1) 5.2(2.2).

A vulnerability in the interdevice communications interface of the Cisco IP Interoperability and Collaboration System (IPICS) Universal Media Services (UMS) could allow an unauthenticated, remote attacker to modify configuration parameters of the UMS and cause the system to become unavailable. Affected Products: This vulnerability affects Cisco IPICS releases 4.8(1) to 4.10(1). More Information: CSCva46644. Known Affected Releases: 4.10(1) 4.8(1) 4.8(2) 4.9(1) 4.9(2).

Cisco IronPort AsyncOS 9.1.2-023, 9.1.2-028, 9.1.2-036, 9.7.2-046, 9.7.2-047, 9.7.2-054, 10.0.0-124, and 10.0.0-125 on Email Security Appliance (ESA) devices, when Enrollment Client before 1.0.2-065 is installed, allows remote attackers to obtain root access via a connection to the testing/debugging interface, aka Bug ID CSCvb26017.

A vulnerability in the content scanning and message filtering features of Cisco Secure Email Gateway could allow an unauthenticated, remote attacker to overwrite arbitrary files on the underlying operating system. This vulnerability is due to improper handling of email attachments when file analysis and content filters are enabled. An attacker could exploit this vulnerability by sending an email that contains a crafted attachment through an affected device. A successful exploit could allow the attacker to replace any file on the underlying file system. The attacker could then perform any of the following actions: add users with root privileges, modify the device configuration, execute arbitrary code, or cause a permanent denial of service (DoS) condition on the affected device. Note: Manual intervention is required to recover from the DoS condition. Customers are advised to contact the Cisco Technical Assistance Center (TAC) to help recover a device in this condition.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business SPA300 Series IP Phones and Cisco Small Business SPA500 Series IP Phones could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system with root privileges. These vulnerabilities exist because incoming HTTP packets are not properly checked for errors, which could result in a buffer overflow. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to overflow an internal buffer and execute arbitrary commands at the root privilege level.

A privilege escalation issue in Cisco Unified IP Conference Station 7937G 1-4-4-0 through 1-4-5-7 allows attackers to reset the credentials for the SSH administrative console to arbitrary values. Note: We cannot prove this vulnerability exists. Out of an abundance of caution, this CVE is being assigned to better serve our customers and ensure all who are still running this product understand that the product is end of life and should be removed or upgraded. For more information on this, and how to upgrade, refer to the CVE’s reference information

A vulnerability in Cisco Smart Licensing Utility (CSLU) could allow an unauthenticated, remote attacker to log into an affected system by using a static administrative credential. This vulnerability is due to an undocumented static user credential for an administrative account. An attacker could exploit this vulnerability by using the static credentials to login to the affected system. A successful exploit could allow the attacker to login to the affected system with administrative rights over the CSLU application API.

A vulnerability in the web-based management interface of Cisco Unity Connection could allow an unauthenticated, remote attacker to upload arbitrary files to an affected system and execute commands on the underlying operating system. This vulnerability is due to a lack of authentication in a specific API and improper validation of user-supplied data. An attacker could exploit this vulnerability by uploading arbitrary files to an affected system. A successful exploit could allow the attacker to store malicious files on the system, execute arbitrary commands on the operating system, and elevate privileges to root.

Cisco Unified Computing System (UCS) Central Software 1.3(1b) and earlier allows remote attackers to execute arbitrary OS commands via a crafted HTTP request, aka Bug ID CSCuv33856.

Cisco Small Business 220 devices with firmware before 1.0.1.1 have a hardcoded SNMP community, which allows remote attackers to read or modify SNMP objects by leveraging knowledge of this community, aka Bug ID CSCuz76216.

Cisco NX-OS 7.0(1)N1(1), 7.0(1)N1(3), and 7.0(4)N1(1) on Nexus 2000 Fabric Extender devices has a blank root password, which allows local users to gain privileges via unspecified vectors, aka Bug ID CSCur22079.

The Tomcat Web Management feature in Cisco Unified Customer Voice Portal (CVP) Software before 9.0.1 ES 11 does not properly configure Tomcat components, which allows remote attackers to execute arbitrary code via a crafted (1) HTTP or (2) HTTPS request, aka Bug ID CSCub38384.

The XML API in TelePresence Codec (TC) 7.2.0, 7.2.1, 7.3.0, 7.3.1, 7.3.2, 7.3.3, 7.3.4, and 7.3.5 and Collaboration Endpoint (CE) 8.0.0, 8.0.1, and 8.1.0 in Cisco TelePresence Software mishandles authentication, which allows remote attackers to execute control commands or make configuration changes via an API request, aka Bug ID CSCuz26935.

Cisco Prime Network Analysis Module (NAM) before 6.1(1) patch.6.1-2-final and 6.2.x before 6.2(1) and Prime Virtual Network Analysis Module (vNAM) before 6.1(1) patch.6.1-2-final and 6.2.x before 6.2(1) allow remote attackers to execute arbitrary OS commands via a crafted HTTP request, aka Bug ID CSCuy21882.

Cisco NX-OS 6.0(2)U6(1) through 6.0(2)U6(5) on Nexus 3000 devices and 6.0(2)A6(1) through 6.0(2)A6(5) and 6.0(2)A7(1) on Nexus 3500 devices has hardcoded credentials, which allows remote attackers to obtain root privileges via a (1) TELNET or (2) SSH session, aka Bug ID CSCuy25800.

Cisco UCS Invicta C3124SA Appliance 4.3.1 through 5.0.1, UCS Invicta Scaling System and Appliance, and Whiptail Racerunner improperly store a default SSH private key, which allows remote attackers to obtain root access via unspecified vectors, aka Bug ID CSCun71294.

The Disaster Recovery Framework (DRF) master server in Cisco Unified Communications products, including Unified Communications Manager (CUCM) 5.x and 6.x, Unified Presence 1.x and 6.x, Emergency Responder 2.x, and Mobility Manager 2.x, does not require authentication for requests received from the network, which allows remote attackers to execute arbitrary code via unspecified vectors.

SNMPv3 HMAC verification in (1) Net-SNMP 5.2.x before 5.2.4.1, 5.3.x before 5.3.2.1, and 5.4.x before 5.4.1.1; (2) UCD-SNMP; (3) eCos; (4) Juniper Session and Resource Control (SRC) C-series 1.0.0 through 2.0.0; (5) NetApp (aka Network Appliance) Data ONTAP 7.3RC1 and 7.3RC2; (6) SNMP Research before 16.2; (7) multiple Cisco IOS, CatOS, ACE, and Nexus products; (8) Ingate Firewall 3.1.0 and later and SIParator 3.1.0 and later; (9) HP OpenView SNMP Emanate Master Agent 15.x; and possibly other products relies on the client to specify the HMAC length, which makes it easier for remote attackers to bypass SNMP authentication via a length value of 1, which only checks the first byte.

Cisco Network Admission Control (NAC) Appliance 3.5.x, 3.6.x before 3.6.4.4, 4.0.x before 4.0.6, and 4.1.x before 4.1.2 allows remote attackers to obtain the shared secret for the Clean Access Server (CAS) and Clean Access Manager (CAM) by sniffing error logs.

Cisco Application Velocity System (AVS) before 5.1.0 is installed with default passwords for some system accounts, which allows remote attackers to gain privileges.

Cisco Modular Encoding Platform D9036 Software before 02.04.70 has hardcoded (1) root and (2) guest passwords, which makes it easier for remote attackers to obtain access via an SSH session, aka Bug ID CSCut88070.

A vulnerability in the container management subsystem of Cisco Digital Network Architecture (DNA) Center could allow an unauthenticated, remote attacker to bypass authentication and gain elevated privileges. This vulnerability is due to an insecure default configuration of the Kubernetes container management subsystem within DNA Center. An attacker who has the ability to access the Kubernetes service port could execute commands with elevated privileges within provisioned containers. A successful exploit could result in a complete compromise of affected containers. This vulnerability affects Cisco DNA Center Software Releases 1.1.3 and prior. Cisco Bug IDs: CSCvi47253.

SQL injection vulnerability in the web-based management interface on Cisco RV220W devices allows remote attackers to execute arbitrary SQL commands via a crafted header in an HTTP request, aka Bug ID CSCuv29574.

The Admin portal in Cisco Identity Services Engine (ISE) 1.1.x, 1.2.0 before patch 17, 1.2.1 before patch 8, 1.3 before patch 5, and 1.4 before patch 4 allows remote attackers to obtain administrative access via unspecified vectors, aka Bug ID CSCuw34253.

Cisco Wireless LAN Controller (WLC) devices with software 7.6.x, 8.0 before 8.0.121.0, and 8.1 before 8.1.131.0 allow remote attackers to change configuration settings via unspecified vectors, aka Bug ID CSCuw06153.

An unspecified CGI script in Cisco FX-OS before 1.1.2 on Firepower 9000 devices and Cisco Unified Computing System (UCS) Manager before 2.2(4b), 2.2(5) before 2.2(5a), and 3.0 before 3.0(2e) allows remote attackers to execute arbitrary shell commands via a crafted HTTP request, aka Bug ID CSCur90888.

A vulnerability in the Cisco Prime File Upload servlet affecting multiple Cisco products could allow a remote attacker to upload arbitrary files to any directory of a vulnerable device (aka Path Traversal) and execute those files. This vulnerability affects the following products: Cisco Prime Data Center Network Manager (DCNM) Version 10.0 and later, and Cisco Prime Infrastructure (PI) All versions. Cisco Bug IDs: CSCvf32411, CSCvf81727.

The default installation of Cisco voice products, when running the IBM Director Agent on IBM servers before OS 2000.2.6, does not require authentication, which allows remote attackers to gain administrator privileges by connecting to TCP port 14247.

The password-change feature in Cisco Unified MeetingPlace Web Conferencing before 8.5(5) MR3 and 8.6 before 8.6(2) does not check the session ID or require entry of the current password, which allows remote attackers to reset arbitrary passwords via a crafted HTTP request, aka Bug ID CSCuu51839.

The conversion utility for converting CiscoWorks Wireless LAN Solution Engine (WLSE) 4.1.91.0 and earlier to Cisco Wireless Control System (WCS) creates administrator accounts with default usernames and passwords, which allows remote attackers to gain privileges.

A vulnerability in the vDaemon process in Cisco IOS XE SD-WAN Software could allow an unauthenticated, remote attacker to cause a buffer overflow on an affected device. This vulnerability is due to insufficient bounds checking when an affected device processes traffic. An attacker could exploit this vulnerability by sending crafted traffic to the device. A successful exploit could allow the attacker to cause a buffer overflow and possibly execute arbitrary commands with root-level privileges, or cause the device to reload, which could result in a denial of service condition.