An issue was discovered in MB connect line mymbCONNECT24, mbCONNECT24 and Helmholz myREX24 and myREX24.virtual in all versions through v2.11.2. An incomplete filter applied to a database response allows an authenticated attacker to gain non-public information about other users and devices in the account.

An issue was discovered in MB CONNECT LINE mymbCONNECT24 and mbCONNECT24 through 2.6.1. There is a blind SQL injection in the knximport component via an advanced attack vector, allowing logged in attackers to discover arbitrary information.

An issue was discovered in MB CONNECT LINE mymbCONNECT24 and mbCONNECT24 through 2.6.1. There is a blind SQL injection in the lancompenent component, allowing logged-in attackers to discover arbitrary information.

An issue was discovered in MB connect line mymbCONNECT24 and mbCONNECT24 software in all versions through V2.6.2. Improper use of access validation allows a logged in user to kill web2go sessions in the account he should not have access to.

An issue was discovered in MB connect line mymbCONNECT24, mbCONNECT24 and Helmholz myREX24 and myREX24.virtual in all versions through v2.11.2. Improper access validation allows a logged in user to shutdown or reboot devices in his account without having corresponding permissions.

An issue was discovered in the MB CONNECT LINE mymbCONNECT24 and mbCONNECT24 software in all versions through 2.6.1. There is a local privilege escalation from the www-data account to the root account.

In MB connect line mbDIALUP versions <= 3.9R0.0 a low privileged local attacker can send a command to the service running with NT AUTHORITY\SYSTEM instructing it to execute a malicous OpenVPN configuration resulting in arbitrary code execution with the privileges of the service.

In Red Lion Europe mbCONNECT24 and mymbCONNECT24 and Helmholz myREX24 and myREX24.virtual up to and including 2.14.2 an improperly implemented access validation allows an authenticated, low privileged attacker to gain read access to limited, non-critical device information in his account he should not have access to.

** UNSUPPORTED WHEN ASSIGNED ** The improper privilege management vulnerability in the command “show_allsessions” in Zyxel NAS326 firmware versions before V5.21(AAZF.17)C0 and NAS542 firmware versions before V5.21(ABAG.14)C0 could allow an authenticated attacker to obtain a logged-in administrator’s session information containing cookies on an affected device.

Improper Privilege Management vulnerability in ZTE ZXR10 1800-2S series ,ZXR10 2800-4,ZXR10 3800-8,ZXR10 160 series on 64 bit allows Functionality Bypass.This issue affects ZXR10 1800-2S series ,ZXR10 2800-4,ZXR10 3800-8,ZXR10 160 series: V4.00.10 and earlier.

An Improper Input Validation vulnerability exists in the user websocket handler of MAAS. An authenticated, unprivileged attacker can intercept a user.update websocket request and inject the is_superuser property set to true. The server improperly validates this input, allowing the attacker to self-promote to an administrator role. This results in full administrative control over the MAAS deployment.

A flaw was found in the way samba handled file and directory permissions. An authenticated user could use this flaw to gain access to certain file and directory information which otherwise would be unavailable to the attacker.

The improper privilege management vulnerability in the Zyxel WBE660S firmware version 6.70(ACGG.3) and earlier versions could allow an authenticated user to escalate privileges and download the configuration files on a vulnerable device.

IBM Robotic Process Automation 21.0.0, 21.0.1, and 21.0.2 could disclose sensitive information due to improper privilege management for storage provider types. IBM X-Force ID: 229962.

The User Registration WordPress plugin before 2.12 does not prevent users with at least the contributor role from rendering sensitive shortcodes, allowing them to generate, and leak, valid password reset URLs, which they can use to take over any accounts.

Improper privilege management vulnerability in Samsung Account prior to 13.2.00.6 allows attackers to get an user email or phone number with a normal level permission.

An issue was discovered in Deskpro before 2019.8.0. The /api/people endpoint failed to properly validate a user's privilege, allowing an attacker to retrieve sensitive information about all users registered on the system. This includes their full name, privilege, email address, phone number, etc.

In OpenXiangShan NEMU, insufficient Smstateen permission enforcement allows lower-privileged code to access IMSIC state via stopei/vstopei CSRs even when mstateen0.IMSIC is cleared, potentially enabling cross-context information leakage or disruption of interrupt handling.

An issue was discovered in Deskpro before 2019.8.0. The /api/tickets endpoint failed to properly validate a user's privilege, allowing an attacker to retrieve arbitrary information about all helpdesk tickets stored in database with numerous filters. This leaked sensitive information to unauthorized parties. Additionally, it leaked ticket authentication code, making it possible to make changes to a ticket.

It was discovered that on Windows operating systems specifically, Kibana was not validating a user supplied path, which would load .pbf files. Because of this, a malicious user could arbitrarily traverse the Kibana host to load internal files ending in the .pbf extension. Thanks to Dominic Couture for finding this vulnerability.

An issue was discovered in GitLab Community and Enterprise Edition before 11.5.8, 11.6.x before 11.6.6, and 11.7.x before 11.7.1. It allows Information Disclosure (issue 4 of 6). In some cases, users without project permissions will receive emails after a project move. For private projects, this will disclose the new project namespace to an unauthorized user.

An issue was discovered in GitLab Enterprise Edition 10.x (starting in 10.6) and 11.x before 11.5.8, 11.6.x before 11.6.6, and 11.7.x before 11.7.1. It has Incorrect Access Control. The merge request approvers section has an access control issue that permits project maintainers to view membership of private groups.

IBM Db2 for Linux, UNIX and Windows 9.7, 10.1, 10.5, 11.1, and 11.5 is vulnerable to an information disclosure in some scenarios due to unauthorized access caused by improper privilege management when CREATE OR REPLACE command is used. IBM X-Force ID: 225979.

An issue was discovered in GitLab Community and Enterprise Edition before 11.5.8, 11.6.x before 11.6.6, and 11.7.x before 11.7.1. It allows Information Disclosure (issue 5 of 6). A project guest user can view the last commit status of the default branch.

An issue was discovered in GitLab Community and Enterprise Edition 9.x, 10.x, and 11.x before 11.5.8, 11.6.x before 11.6.6, and 11.7.x before 11.7.1. It has Incorrect Access Control. A user retains their role within a project in a private group after being removed from the group, if their privileges within the project are different from the group.

The v6.40 release of Rockwell Automation FactoryTalk® Policy Manager CVE-2021-22681 https://www.rockwellautomation.com/en-us/trust-center/security-advisories/advisory.PN1550.html  and CVE-2022-1161 https://www.rockwellautomation.com/en-us/trust-center/security-advisories/advisory.PN1585.html  by implementing CIP security and did not update to the versions of the software CVE-2022-1161 https://www.rockwellautomation.com/en-us/trust-center/security-advisories/advisory.PN1585.html  and CVE-2022-1161. https://www.rockwellautomation.com/en-us/trust-center/security-advisories/advisory.PN1585.html

AVEVA Wonderware System Platform 2017 Update 2 and prior uses an ArchestrA network user account for authentication of system processes and inter-node communications. A user with low privileges could make use of an API to obtain the credentials for this account.

IBM Cognos Analytics 11.0 and 11.1 is vulnerable to privlege escalation where the "My schedules and subscriptions" page is visible and accessible to a less privileged user. IBM X-Force ID: 167449.

A User Enumeration flaw exists in Harbor. The issue is present in the "/users" API endpoint. This endpoint is supposed to be restricted to administrators. This restriction is able to be bypassed and information can be obtained about registered users can be obtained via the "search" functionality.

A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to obtain sensitive information from an affected device. This vulnerability exists because administrative privilege levels for sensitive data are not properly enforced. An attacker with read-only privileges for the web-based management interface on an affected device could exploit this vulnerability by browsing to a page that contains sensitive data. A successful exploit could allow the attacker to collect sensitive information about the system configuration.

A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to obtain sensitive information from an affected device. This vulnerability is due to improper enforcement of administrative privilege levels for high-value sensitive data. An attacker with read-only Administrator privileges to the web-based management interface on an affected device could exploit this vulnerability by browsing to a page that contains sensitive data. A successful exploit could allow the attacker to collect sensitive information regarding the configuration of the system.

IBM Jazz Reporting Service (JRS) 6.0.6 could allow an authenticated user to access the execution log files as a guest user, and obtain the information of the server execution. IBM X-Force ID: 156243.

One of the API in Mattermost version 6.4.1 and earlier fails to properly protect the permissions, which allows the authenticated members with restricted custom admin role to bypass the restrictions and view the server logs and server config.json file contents.

MISP before 2.4.115 allows privilege escalation in certain situations. After updating to 2.4.115, escalation attempts are blocked by the __checkLoggedActions function with a "This could be an indication of an attempted privilege escalation on older vulnerable versions of MISP (<2.4.115)" message.

An Information Disclosure issue in Verodin Director 3.5.3.1 and earlier reveals usernames and passwords of integrated security technologies via a /integrations.json JSON REST API request.

Improper Privilege Management in GitHub repository chatwoot/chatwoot prior to v2.2.

Steeltoe is an open source project that provides a collection of libraries that helps users build cloud-native applications. In Steeltoe.Management.Endpoint prior to version 4.2.0 and Steeltoe.Management.EndpointCore prior to version 3.4.0, all Steeltoe actuator endpoints default to `EndpointPermissions.Restricted`, which is mappeds to Cloud Foundry's `read_basic_data` permission (granted to Space Auditors and similar low-trust roles). Sensitive actuators including heap dump, environment, and thread dump do not raise this to `EndpointPermissions.Full`, so CF's `read_sensitive_data` permission flag is not enforced for those endpoints. Spring Boot's equivalent Cloud Foundry integration gates these endpoints with `read_sensitive_data` by default. Steeltoe.Management.Endpoint 4.2.0 and Steeltoe.Management.EndpointCore 3.4.0 patch the issue. If an immediate upgrade is not possible, explicitly set `RequiredPermissions = EndpointPermissions.Full` in the options for `HeapDumpEndpointOptions`, `EnvironmentEndpointOptions`, and `ThreadDumpEndpointOptions`; and/or if heap dump, thread dump, or environment are not needed in production, register only the required actuators individually instead of using `AddAllActuators()`.

AR System Mid Tier in the AR System Mid Tier component before 9.0 SP1 for BMC Remedy AR System Server allows remote authenticated users to "navigate" to arbitrary files via the __report parameter of the BIRT viewer servlet.

The BIRT Engine servlet in the AR System Mid Tier component before 9.0 SP1 for BMC Remedy AR System Server allows remote authenticated users to "navigate" to arbitrary local files via the __imageid parameter.

Multiple vulnerabilities in the Admin portal of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to obtain sensitive information. These vulnerabilities are due to improper enforcement of administrator privilege levels for sensitive data. An attacker with read-only administrator access to the Admin portal could exploit these vulnerabilities by browsing to one of the pages that contains sensitive data. A successful exploit could allow the attacker to collect sensitive information regarding the configuration of the system. For more information about these vulnerabilities, see the Details section of this advisory.

be_teacher in class-lp-admin-ajax.php in the LearnPress plugin 3.2.6.5 and earlier for WordPress allows any registered user to assign itself the teacher role via the wp-admin/admin-ajax.php?action=learnpress_be_teacher URI without any additional permission checks. Therefore, any user can change its role to an instructor/teacher and gain access to otherwise restricted data.

In Elasticsearch before 7.9.0 and 6.8.12 a field disclosure flaw was found when running a scrolling search with Field Level Security. If a user runs the same query another more privileged user recently ran, the scrolling search can leak fields that should be hidden. This could result in an attacker gaining additional permissions against a restricted index.

Elastic Enterprise Search before 7.9.0 contain a credential exposure flaw in the App Search interface. If a user is given the �developer� role, they will be able to view the administrator API credentials. These credentials could allow the developer user to conduct operations with the same permissions of the App Search administrator.

Nagios Log Server 2.1.3 has Incorrect Access Control.

In BIG-IP versions 15.1.0-15.1.0.4 and 15.0.0-15.0.1.3 the Certificate Administrator user role and higher privileged roles can perform arbitrary file reads outside of the web root directory.

Improper privilege validation vulnerability in COM Interface of Gallagher Command Centre Server allows authenticated unprivileged operators to retrieve sensitive information from the Command Centre Server. This issue affects: Gallagher Command Centre 8.50 versions prior to 8.50.2048 (MR3) ; 8.40 versions prior to 8.40.2063 (MR4); 8.30 versions prior to 8.30.1454 (MR4) ; 8.20 versions prior to 8.20.1291 (MR6); version 8.10 and prior versions.

Improper privilege management for some Intel(R) CIP software before version WIN_DCA_2.4.0.11001 within Ring 3: User Applications may allow an information disclosure. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable data exposure. This result may potentially occur via network access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (none) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts.

Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. Argo CD has a Web-based terminal that allows users to get a shell inside a running pod, just as they would with kubectl exec. Starting in version 2.6.0, when the administrator enables this function and grants permission to the user `p, role:myrole, exec, create, */*, allow`, even if the user revokes this permission, the user can still perform operations in the container, as long as the user keeps the terminal view open for a long time. Although the token expiration and revocation of the user are fixed, however, the fix does not address the situation of revocation of only user `p, role:myrole, exec, create, */*, allow` permissions, which may still lead to the leakage of sensitive information. A patch for this vulnerability has been released in Argo CD versions 2.11.7, 2.10.16, and 2.9.21.

IBM Db2 for Linux, UNIX and Windows (includes Db2 Connect Server) 10.5, 11.1, and 11.5 is vulnerable to an information disclosure due to improper privilege management when certain federation features are used. IBM X-Force ID: 252046.

ManageEngine ServiceDesk Plus through 14104, ServiceDesk Plus MSP through 14000, Support Center Plus through 14000, and Asset Explorer through 6987 allow privilege escalation via query reports.