A Use of Hardcoded Credentials vulnerability exists in AquaView versions 1.60, 7.x, and 8.x that could allow an authenticated local attacker to manipulate users and system settings.

An issue was discovered in Luna Simo PPR1.180610.011/202001031830. It mishandles software updates such that local third-party apps can provide a spoofed software update file that contains an arbitrary shell script and arbitrary ARM binary, where both will be executed as the root user with an SELinux domain named osi. To exploit this vulnerability, a local third-party app needs to have write access to external storage to write the spoofed update at the expected path. The vulnerable system binary (i.e., /system/bin/osi_bin) does not perform any authentication of the update file beyond ensuring that it is encrypted with an AES key (that is hard-coded in the vulnerable system binary). Processes executing with the osi SELinux domain can programmatically perform the following actions: install apps, grant runtime permissions to apps (including permissions with protection levels of dangerous and development), access extensive Personally Identifiable Information (PII) using the programmatically grant permissions, uninstall apps, set the default launcher app to a malicious launcher app that spoofs other apps, set a network proxy to intercept network traffic, unload kernel modules, set the default keyboard to a keyboard that has keylogging functionality, examine notification contents, send text messages, and more. The spoofed update can optionally contain an arbitrary ARM binary that will be locally stored in internal storage and executed at system startup to achieve persistent code execution as the root user with the osi SELinux domain. This ARM binary will continue to execute at startup even if the app that provided the spoofed update is uninstalled.

A use of hard-coded cryptographic key vulnerability [CWE-321] in the registration mechanism of FortiEDR collectors versions 5.0.2, 5.0.1, 5.0.0, 4.0.0 may allow a local attacker to disable and uninstall the collectors from the end-points within the same deployment.

In the Broadcom Nexus firmware, there is an insecure default password. This could lead to local escalation of privilege in the kernel with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android SoCAndroid ID: A-171413483

ROZCOM client CWE-798: Use of Hard-coded Credentials

Crestron AM-100 with firmware 1.6.0.2 and AM-101 with firmware 2.7.0.2 stores usernames, passwords, and other configuration options in the file generated via the "export configuration" feature. The configuration file is encrypted using the awenc binary. The same binary can be used to decrypt any configuration file since all the encryption logic is hard coded. A local attacker can use this vulnerability to gain access to devices username and passwords.

TOTOLINK N600R V4.3.0cu.7647_B20210106 was discovered to contain a hardcoded password for root at /etc/shadow.sample.

D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) and REV. B (with firmware through FW208WWb02) devices have 0666 /var/run/hostapd* permissions.

The Cisco AMP For Endpoints application allows an authenticated, local attacker to access a static key value stored in the local application software. The vulnerability is due to the use of a static key value stored in the application used to encrypt the connector protection password. An attacker could exploit this vulnerability by gaining local, administrative access to a Windows host and stopping the Cisco AMP for Endpoints service. Cisco Bug IDs: CSCvg42904.

In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while flashing FRP partition using reference FRP unlock, authentication method can be compromised for static keys.

An issue was discovered in CommScope Ruckus IoT Controller 1.7.1.0 and earlier. Hard-coded API Keys exist.

An issue was discovered on TK-Star Q90 Junior GPS horloge 3.1042.9.8656 devices. When using the device at initial setup, a default password is used (123456) for administrative purposes. There is no prompt to change this password. Note that this password can be used in combination with CVE-2019-20470.

GE UR bootloader binary Version 7.00, 7.01 and 7.02 included unused hardcoded credentials. Additionally, a user with physical access to the UR IED can interrupt the boot sequence by rebooting the UR.

The software contains a hard-coded password that could allow an attacker to take control of the merging unit using these hard-coded credentials on the MU320E (all firmware versions prior to v04A00.1).

Brocade SANnav versions before v2.0 use a hard-coded password, which could allow local authenticated attackers to access a back-end database and gain privileges.

IBM BigFix Remote Control before 9.1.3 allows local users to discover hardcoded credentials via unspecified vectors.

An exposed Telnet Service on the Billion Smart Energy Router SG600R2 with firmware v3.02.rc6 allows a local network attacker to authenticate via hardcoded credentials into a shell, gaining root execution privileges over the device.

GE Mark VIe Controller is shipped with pre-configured hard-coded credentials that may allow root-user access to the controller. A limited application of the affected product may ship without setup and configuration instructions immediately available to the end user. The bulk of controllers go into applications requiring the GE commissioning engineer to change default configurations during the installation process. GE recommends that users reset controller passwords during installation in the operating environment.

VVX products with software versions including and prior to, UCS 5.9.2 with Better Together over Ethernet Connector (BToE) application 3.9.1, use hard-coded credentials to establish connections between the host application and the device.

ISOS firmwares from versions 1.81 to 2.00 contain hardcoded credentials from embedded StreamX installer that integrators are not forced to change.

A vulnerability was found in GE Voluson S8. It has been rated as critical. This issue affects the Service Browser which itroduces hard-coded credentials. Attacking locally is a requirement. It is recommended to change the configuration settings.

IBM QRadar SIEM 7.3 and 7.4 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 191748.

A CWE-798: Use of Hard-coded Credentials vulnerability exists that could cause local privilege escalation when local attacker connects to the database. Affected Products: APC Easy UPS Online Monitoring Software (Windows 7, 10, 11 & Windows Server 2016, 2019, 2022 - Versions prior to V2.5-GA), APC Easy UPS Online Monitoring Software (Windows 11, Windows Server 2019, 2022 - Versions prior to V2.5-GA-01-22261), Schneider Electric Easy UPS Online Monitoring Software (Windows 7, 10, 11 & Windows Server 2016, 2019, 2022 - Versions prior to V2.5-GS), Schneider Electric Easy UPS Online Monitoring Software (Windows 11, Windows Server 2019, 2022 - Versions prior to V2.5-GS-01-22261)

BD Totalys MultiProcessor, versions 1.70 and earlier, contain hardcoded credentials. If exploited, threat actors may be able to access, modify or delete sensitive information, including electronic protected health information (ePHI), protected health information (PHI) and personally identifiable information (PII). Customers using BD Totalys MultiProcessor version 1.70 with Microsoft Windows 10 have additional operating system hardening configurations which increase the attack complexity required to exploit this vulnerability.

An attacker with local access to the medical office computer can access restricted functions of the Elefant Service tool by using a hard-coded "Hotline" password in the Elefant service binary, which is shipped with the software.

Zoom Rooms for macOS clients before version 5.11.4 contain an insecure key generation mechanism. The encryption key used for IPC between the Zoom Rooms daemon service and the Zoom Rooms client was generated using parameters that could be obtained by a local low-privileged application. That key can then be used to interact with the daemon service to execute privileged functions and cause a local denial of service.

Patterson Dental Eaglesoft 21 has AES-256 encryption but there are two ways to obtain a keyfile: (1) keybackup.data > License > Encryption Key or (2) Eaglesoft.Server.Configuration.data > DbEncryptKeyPrimary > Encryption Key. Applicable files are encrypted with keys and salt that are hardcoded into a DLL or EXE file.

TOTOLINK A720R V4.1.5cu.532_B20210610 was discovered to contain a hardcoded password for root at /etc/shadow.sample.

TOTOLINK A810R V4.1.2cu.5182_B20201026 and V5.9c.4050_B20190424 was discovered to contain a hardcoded password for root at /etc/shadow.sample.

TOTOLINK A860R V4.1.2cu.5182_B20201027 was discovered to contain a hardcoded password for root at /etc/shadow.sample.

TOTOLINK A800R V4.1.2cu.5137_B20200730 was discovered to contain a hardcoded password for root at /etc/shadow.sample.

IBM Spectrum LSF 10.1 and IBM Spectrum LSF Suite 10.2 could allow a user on the local network who has privileges to submit LSF jobs to execute arbitrary commands. IBM X-Force ID: 192586.

An issue was discovered on V-SOL V1600D V2.03.69 and V2.03.57, V1600G1 V2.0.7 and V1.9.7, and V1600G2 V1.1.4 OLT devices. A hardcoded RSA private key (specific to V1600D, V1600G1, and V1600G2) is contained in the firmware images.

D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) and REV. B (with firmware through FW208WWb02) devices have 0644 /var/etc/shadow (aka the /etc/shadow symlink target) permissions.

TOTOLINK A3000RU V4.1.2cu.5185_B20201128 was discovered to contain a hardcoded password for root at /etc/shadow.sample.