Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

an attacker with knowledge of user/pass of Grandstream GSD3710 in its 1.0.11.13 version, could overflow the stack since it doesn't check the param length before use the strcopy instruction. The explotation of this vulnerability may lead an attacker to execute a shell with full access.

Xion Audio Player versions prior to 1.0.126 are vulnerable to a Unicode-based stack buffer overflow triggered by opening a specially crafted .m3u playlist file. The file contains an overly long string that overwrites the Structured Exception Handler (SEH) chain, allowing an attacker to hijack execution flow and run arbitrary code.

An issue was discovered on Supermicro BMC firmware in select X11, X12, H12, B12, X13, H13, and B13 motherboards (and CMM6 modules). An unauthenticated user can post crafted data to the interface that triggers a stack buffer overflow, and may lead to arbitrary remote code execution on a BMC.

A stack-based buffer overflow vulnerability exists in the MFER parsing functionality of The Biosig Project libbiosig 3.9.0 and Master Branch (35a819fa). A specially crafted MFER file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability.This vulnerability manifests on line 8842 of biosig.c on the current master branch (35a819fa), when the Tag is 12: else if (tag==12) //0x0C { // sampling resolution if (len>6) fprintf(stderr,"Warning MFER tag12 incorrect length %i>6\n",len); val32 = 0; int8_t v8; curPos += ifread(&UnitCode,1,1,hdr); curPos += ifread(&v8,1,1,hdr); curPos += ifread(buf,1,len-2,hdr); In addition to values of `len` greater than 130 triggering a buffer overflow, a value of `len` smaller than 2 will also trigger a buffer overflow due to an integer underflow when computing `len-2` in this code path.

An unauthenticated remote attacker can abuse unsafe sscanf calls within the check_account() function to write arbitrary data into fixed-size stack buffers which leads to full device compromise.

Fuji Electric Smart Editor is vulnerable to a stack-based buffer overflow, which may allow an attacker to execute arbitrary code.

Active! mail 6 BuildInfo: 6.60.05008561 and earlier contains a stack-based buffer overflow vulnerability. Receiving a specially crafted request created and sent by a remote unauthenticated attacker may lead to arbitrary code execution and/or a denial-of-service (DoS) condition.

FTPPad <= 1.2.0 contains a stack-based buffer overflow vulnerability in its FTP directory listing parser. When the client connects to an FTP server and receives a crafted response to a LIST command containing an excessively long directory and filename, the application fails to properly validate input length. This results in a buffer overflow that overwrites the saved Extended Instruction Pointer (EIP), allowing remote attackers to execute arbitrary code.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Netatalk. Authentication is not required to exploit this vulnerability. The specific flaw exists within the ad_addcomment function. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-15876.

A stack-based buffer overflow vulnerability exists in the touchlist_sync.cgi touchlistsync() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can send an HTTP request to trigger this vulnerability.

A vulnerability was found in Tenda W12 3.0.0.5. It has been rated as critical. Affected by this issue is the function cgiWifiRadioSet of the file /bin/httpd. The manipulation leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

The LCD KVM over IP Switch CL5708IM has a Stack-based Buffer Overflow vulnerability in firmware versions prior to v2.2.215, allowing unauthenticated remote attackers to exploit this vulnerability to execute arbitrary code on the device.

The LCD KVM over IP Switch CL5708IM has a Stack-based Buffer Overflow vulnerability in firmware versions prior to v2.2.215, allowing unauthenticated remote attackers to exploit this vulnerability to execute arbitrary code on the device.

Stack overflow in PJSUA API when calling pjsua_playlist_create. An attacker-controlled 'file_names' argument may cause a buffer overflow since it is copied to a fixed-size stack buffer without any size validation.

Stack overflow in PJSUA API when calling pjsua_player_create. An attacker-controlled 'filename' argument may cause a buffer overflow since it is copied to a fixed-size stack buffer without any size validation.

The LCD KVM over IP Switch CL5708IM has a Stack-based Buffer Overflow vulnerability in firmware versions prior to v2.2.215, allowing unauthenticated remote attackers to exploit this vulnerability to execute arbitrary code on the device.

Multiple stack-based buffer overflow vulnerabilities [CWE-121] in the proxy daemon of FortiWeb 5.x all versions, 6.0.7 and below, 6.1.2 and below, 6.2.6 and below, 6.3.16 and below, 6.4 all versions may allow an unauthenticated remote attacker to achieve arbitrary code execution via specifically crafted HTTP requests.

Stack overflow in PJSUA API when calling pjsua_recorder_create. An attacker-controlled 'filename' argument may cause a buffer overflow since it is copied to a fixed-size stack buffer without any size validation.

libcoap versions up to and including 4.3.5, prior to commit 30db3ea, contain a stack-based buffer overflow in address resolution when attacker-controlled hostname data is copied into a fixed 256-byte stack buffer without proper bounds checking. A remote attacker can trigger a crash and potentially achieve remote code execution depending on compiler options and runtime memory protections. Exploitation requires the proxy logic to be enabled (i.e., the proxy request handling code path in an application using libcoap).

A stack-based buffer overflow vulnerability exists in VideoCharge Studio 2.12.3.685 when processing a specially crafted .VSC configuration file. The issue occurs due to improper handling of user-supplied data in the XML 'Name' attribute, leading to an SEH overwrite condition. An attacker can exploit this vulnerability by convincing a user to open a malicious .VSC file, resulting in arbitrary code execution under the context of the user.

FTP Commander Pro 8.03 contains a local stack overflow vulnerability that allows attackers to execute arbitrary code by overwriting the EIP register through a custom command input. Attackers can craft a malicious payload of 4108 bytes to overwrite memory and execute shellcode, demonstrating remote code execution potential.

A stack-based buffer overflow vulnerability exists in the MFER parsing functionality of The Biosig Project libbiosig 3.9.0 and Master Branch (35a819fa). A specially crafted MFER file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability.This vulnerability manifests on line 8824 of biosig.c on the current master branch (35a819fa), when the Tag is 11: else if (tag==11) //0x0B { // Fs if (len>6) fprintf(stderr,"Warning MFER tag11 incorrect length %i>6\n",len); double fval; curPos += ifread(buf,1,len,hdr);

Improper Restriction of Operations within the Bounds of a Memory Buffer and Stack-based Buffer Overflow vulnerabilities were discovered in Apache NuttX RTOS Bluetooth Stack (HCI and UART components) that may result in system crash, denial of service, or arbitrary code execution, after receiving maliciously crafted packets. NuttX's Bluetooth HCI/UART stack users are advised to upgrade to version 12.9.0, which fixes the identified implementation issues. This issue affects Apache NuttX: from 7.25 before 12.9.0.

Advantech WebAccess versions 9.02 and prior are vulnerable to a stack-based buffer overflow, which may allow an attacker to remotely execute code.

A vulnerability, which was classified as critical, has been found in qinguoyi TinyWebServer up to 1.0. Affected by this issue is some unknown functionality of the file /http/http_conn.cpp. The manipulation of the argument name/password leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A stack-based buffer overflow vulnerability in Advantech WebAccess Versions 9.02 and prior caused by a lack of proper validation of the length of user-supplied data may allow remote code execution.

A stack-based buffer overflow vulnerability exists in the Cloud API functionality of Tenda AC6 V5.0 V02.03.01.110. A specially crafted HTTP response can lead to arbitrary code execution. An attacker can send an HTTP response to trigger this vulnerability.

Stack-based Buffer Overflow vulnerability in cachekey plugin of Apache Traffic Server. This issue affects Apache Traffic Server 7.0.0 to 7.1.12, 8.0.0 to 8.1.1, 9.0.0 to 9.0.1.

A stack-based buffer overflow vulnerability exists in the MFER parsing functionality of The Biosig Project libbiosig 3.9.0 and Master Branch (35a819fa). A specially crafted MFER file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability.This vulnerability manifests on line 9090 of biosig.c on the current master branch (35a819fa), when the Tag is 64: else if (tag==64) //0x40 { // preamble char tmp[256]; // [1] curPos += ifread(tmp,1,len,hdr); In this case, the overflowed buffer is the newly-declared `tmp` \[1\] instead of `buf`. While `tmp` is larger than `buf`, having a size of 256 bytes, a stack overflow can still occur in cases where `len` is encoded using multiple octets and is greater than 256.

A stack-based buffer overflow in Fortinet FortiAnalyzer versions 7.4.0 through 7.4.3, 7.2.0 through 7.2.5, 7.0.0 through 7.0.12, 6.4.0 through 6.4.14, FortiManager versions 7.4.0 through 7.4.3, 7.2.0 through 7.2.5, 7.0.0 through 7.0.12, 6.4.0 through 6.4.14, FortiManager Cloud versions 7.4.1 through 7.4.3, 7.2.1 through 7.2.5, 7.0.1 through 7.0.11, 6.4.1 through 6.4.7, FortiAnalyzer Cloud versions 7.4.1 through 7.4.3, 7.2.1 through 7.2.5, 7.0.1 through 7.0.11, 6.4.1 through 6.4.7 allows attacker to execute unauthorized code or commands via specially crafted packets.

FATEK Automation Communication Server Versions 1.13 and prior lacks proper validation of user-supplied data, which could result in a stack-based buffer overflow condition and allow an attacker to remotely execute code.

Annke N48PBB (Network Video Recorder) products of version 3.4.106 build 200422 and prior are vulnerable to a stack-based buffer overflow, which allows an unauthorized remote attacker to execute arbitrary code with the same privileges as the server user (root).

TOTOLINK LR350 V9.3.5u.6369_B20220309 was discovered to contain a stack overflow via the http_host parameter in the function loginAuth.

AVEVA InduSoft Web Studio v8.1 and v8.1SP1, and InTouch Machine Edition v2017 8.1 and v2017 8.1 SP1 a remote user could send a carefully crafted packet to exploit a stack-based buffer overflow vulnerability during tag, alarm, or event related actions such as read and write, with potential for code to be executed.

AOL versions up to and including 9.5 includes an ActiveX control (Phobos.dll) that exposes a method called Import() via the Phobos.Playlist COM object. This method is vulnerable to a stack-based buffer overflow when provided with an excessively long string argument. Exploitation allows remote attackers to execute arbitrary code in the context of the user, but only when the malicious HTML file is opened locally, due to the control not being marked safe for scripting or initialization. AOL remains an active and supported brand offering services like AOL Mail and AOL Desktop Gold, but the legacy AOL 9.5 desktop software—specifically the version containing the vulnerable Phobos.dll ActiveX control—is long discontinued and no longer maintained.

A memory corruption vulnerability exists in Palo Alto Networks GlobalProtect portal and gateway interfaces that enables an unauthenticated network-based attacker to disrupt system processes and potentially execute arbitrary code with root privileges. The attacker must have network access to the GlobalProtect interface to exploit this issue. This issue impacts PAN-OS 8.1 versions earlier than PAN-OS 8.1.17. Prisma Access customers are not impacted by this issue.

A stack-based buffer overflow vulnerability exists in D-Link DIR-605L Wireless N300 Cloud Router firmware versions 1.12 and 1.13 via the getAuthCode() function. The flaw arises from unsafe usage of sprintf() when processing user-supplied CAPTCHA data via the FILECODE parameter in /goform/formLogin. A remote unauthenticated attacker can exploit this to execute arbitrary code with root privileges on the device.

Tenda AX1806 v1.0.0.1 contains a stack overflow via the adv.iptv.stbpvid parameter in the function formSetIptv.

Tenda AC8 V16.03.34.06 is vulnerable to Buffer Overflow in the fromSetRouteStatic function via the parameter list.

A stack-based buffer overflow vulnerability has been reported to affect QNAP NAS devices running Surveillance Station. If exploited, this vulnerability allows attackers to execute arbitrary code. QNAP have already fixed this vulnerability in the following versions: Surveillance Station 5.1.5.4.3 (and later) for ARM CPU NAS (64bit OS) and x86 CPU NAS (64bit OS) Surveillance Station 5.1.5.3.3 (and later) for ARM CPU NAS (32bit OS) and x86 CPU NAS (32bit OS)

A vulnerability classified as critical has been found in Totolink N200RE 9.3.5u.6139_B20201216. Affected is the function main of the file /cgi-bin/cstecgi.cgi. The manipulation leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-252270 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in D-Link DAP-1620 1.03 and classified as critical. This issue affects the function check_dws_cookie of the file /storage. The manipulation of the argument uid leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Certain HP LaserJet Pro, HP LaserJet Enterprise, and HP LaserJet Managed Printers may potentially be vulnerable to Remote Code Execution and Elevation of Privilege when processing a PostScript print job.

Redis is an open source, in-memory database that persists on disk. In versions starting from 7.0.0 to before 8.0.2, a stack-based buffer overflow exists in redis-check-aof due to the use of memcpy with strlen(filepath) when copying a user-supplied file path into a fixed-size stack buffer. This allows an attacker to overflow the stack and potentially achieve code execution. This issue has been patched in version 8.0.2.

Dell Chassis Management Controller Firmware for Dell PowerEdge FX2, version(s) prior to 2.40.200.202101130302, and Dell Chassis Management Controller Firmware for Dell PowerEdge VRTX version(s) prior to 3.41.200.202209300499, contain(s) a Stack-based Buffer Overflow vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Remote execution.