The /admin/admapi.php script of Invigo Automatic Device Management (ADM) through 5.0 allows remote authenticated attackers to execute arbitrary OS commands on the server as the user running the application.

Gira TKS-IP-Gateway 4.0.7.7 is vulnerable to authenticated remote code execution via the backup functionality of the web frontend. This can be combined with CVE-2020-10794 for remote root access.

Vesta Control Panel (VestaCP) through 0.9.8-26 allows Command Injection via the schedule/backup Backup Listing Endpoint. The attacker must be able to create a crafted filename on the server, as demonstrated by an FTP session that renames .bash_logout to a .bash_logout' substring followed by shell metacharacters.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the wps_sta_enrollee_pin parameter in a set_sta_enrollee_pin.cgi POST request. TRENDnet TEW-632BRP 1.010B32 is also affected.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the dns_query_name parameter in a dns_query.cgi POST request. TRENDnet TEW-632BRP 1.010B32 is also affected.

A vulnerability was found in a Moodle TeX filter administrative setting where insufficient sanitization of configuration input could allow command injection. On sites where the TeX filter is enabled and ImageMagick is installed, a maliciously crafted setting value entered by an administrator could result in unintended system command execution. While exploitation requires administrative privileges, successful compromise could affect the entire Moodle server.

Ruckus Networks Solo APs firmware releases R110.x or before and Ruckus Networks SZ managed APs firmware releases R5.x or before contain authenticated Root Command Injection in the web-GUI that could allow authenticated valid users to execute privileged commands on the respective systems.

IBM Security Access Manager Appliance 9.0.3 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially-crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 128372.

An OS command injection vulnerability in the Palo Alto Networks PAN-OS web interface enables an authenticated administrator to execute arbitrary OS commands to escalate privileges. This issue impacts: PAN-OS 9.0 version 9.0.10 through PAN-OS 9.0.14; PAN-OS 9.1 version 9.1.4 through PAN-OS 9.1.10; PAN-OS 10.0 version 10.0.7 and earlier PAN-OS 10.0 versions; PAN-OS 10.1 version 10.1.0 through PAN-OS 10.1.1. Prisma Access firewalls and firewalls running PAN-OS 8.1 versions are not impacted by this issue.

The web console for Mimosa B5, B5c, and C5x firmware through 2.8.0.2 allows authenticated command injection in the Throughput, WANStats, PhyStats, and QosStats API classes. An attacker with access to a web console account may execute operating system commands on affected devices by sending crafted POST requests to the affected endpoints (/core/api/calls/Throughput.php, /core/api/calls/WANStats.php, /core/api/calls/PhyStats.php, /core/api/calls/QosStats.php). This results in the complete takeover of the vulnerable device. This vulnerability does not occur in the older 1.5.x firmware versions.

MitraStar GPT-2541GNAC-N1 (HGU) 100VNZ0b33 devices allow remote authenticated users to obtain root access by executing command "deviceinfo show file &&/bin/bash" because of incorrect sanitization of parameter "path".

A security-check flaw was found in the way the Heketi 5 server API handled user requests. An authenticated Heketi user could send specially crafted requests to the Heketi server, resulting in remote command execution as the user running Heketi server and possibly privilege escalation.

An OS command injection vulnerability exists in the device network settings functionality of reolink RLC-410W v3.0.0.136_20121102. At [1] or [2], based on DDNS type, the ddns->domain variable, that has the value of the domain parameter provided through the SetDdns API, is not validated properly. This would lead to an OS command injection. An attacker can send an HTTP request to trigger this vulnerability.

The ImageMagick Engine ImageMagick Engine WordPress plugin before 1.7.11 for WordPress is vulnerable to OS Command Injection via the "cli_path" parameter. This allows authenticated attackers, with administrator-level permission to execute arbitrary OS commands on the server leading to remote code execution.

A remote execution of arbitrary commands vulnerability was discovered in some Aruba Instant Access Point (IAP) products in version(s): Aruba Instant 6.5.x: 6.5.4.17 and below; Aruba Instant 8.3.x: 8.3.0.13 and below; Aruba Instant 8.5.x: 8.5.0.10 and below; Aruba Instant 8.6.x: 8.6.0.5 and below; Aruba Instant 8.7.x: 8.7.0.0 and below. Aruba has released patches for Aruba Instant that address this security vulnerability.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetStaticRouteIPv4Settings API function, as demonstrated by shell metacharacters in the Gateway field.

Vesta Control Panel (VestaCP) 0.9.7 through 0.9.8-23 is vulnerable to an authenticated command execution that can result in remote root access on the server. The platform works with PHP as the frontend language and uses shell scripts to execute system actions. PHP executes shell script through the dangerous command exec. This function can be dangerous if arguments passed to it are not filtered. Every user input in VestaCP that is used as an argument is filtered with the escapeshellarg function. This function comes from the PHP library directly and its description is as follows: "escapeshellarg() adds single quotes around a string and quotes/escapes any existing single quotes allowing you to pass a string directly to a shell function and having it be treated as a single safe argument." It means that if you give Username, it will have 'Username' as a replacement. This works well and protects users from exploiting this potentially dangerous exec function. Unfortunately, VestaCP uses this escapeshellarg function incorrectly in several places.

A vulnerability was identified in Advantech WISE-6610 1.2.1_20251110. Affected is an unknown function of the file /cgi-bin/luci/admin/openvpn_apply of the component Background Management. Such manipulation of the argument delete_file leads to os command injection. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

Mobile Access Portal Native Applications who's path is defined by the administrator with environment variables may run applications from other locations by the Mobile Access Portal Agent.

An exploitable command injection vulnerability exists in the web server functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted HTTP POST can cause a privilege escalation resulting in root shell. An attacker can inject OS commands into the openvpnServer0_tmp= parameter in the "/goform/net\_Web\_get_value" uri to trigger this vulnerability.

Git before 2.10.5, 2.11.x before 2.11.4, 2.12.x before 2.12.5, 2.13.x before 2.13.6, and 2.14.x before 2.14.2 uses unsafe Perl scripts to support subcommands such as cvsserver, which allows attackers to execute arbitrary OS commands via shell metacharacters in a module name. The vulnerable code is reachable via git-shell even without CVS support.

CouchDB administrative users can configure the database server via HTTP(S). Some of the configuration options include paths for operating system-level binaries that are subsequently launched by CouchDB. This allows an admin user in Apache CouchDB before 1.7.0 and 2.x before 2.1.1 to execute arbitrary shell commands as the CouchDB user, including downloading and executing scripts from the public internet.

IBM MQ Appliance 8.0 and 9.0 could allow an authenticated messaging administrator to execute arbitrary commands on the system, caused by command execution. IBM X-Force ID: 125730.

An Improper Neutralization of Special Elements used in an OS Command issue was discovered in Digium Asterisk GUI 2.1.0 and prior. An OS command injection vulnerability has been identified that may allow the execution of arbitrary code on the system through the inclusion of OS commands in the URL request of the program.

Insufficient validation of user-supplied input for the Solstice Pod before 2.8.4 networking configuration enables authenticated attackers to execute arbitrary commands as root.

Two OS command injection vulnerabilities exist in the zebra vlan_name functionality of Milesight UR32L v32.3.0.5. A specially crafted network request can lead to command execution. An attacker can send a network request to trigger these vulnerabilities.This command injection is in the code branch that manages a new vlan configuration.

An issue was discovered in RiteCMS 2.2.1. An authenticated user can directly execute system commands by uploading a php web shell in the "Filemanager" section.

HGiga MailSherlock query function for connection log has a vulnerability of insufficient filtering for user input. An authenticated remote attacker with administrator privilege can exploit this vulnerability to inject and execute arbitrary system commands to perform arbitrary system operation or disrupt service.

An exploitable command injection vulnerability exists in the web server functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted HTTP POST can cause a privilege escalation resulting in root shell. An attacker can inject OS commands into the rsakey\_name= parm in the "/goform/WebRSAKEYGen" uri to trigger this vulnerability.

An exploitable command injection vulnerability exists in the web server functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted HTTP POST can cause a privilege escalation resulting in root shell. An attacker can inject OS commands into the CN= parm in the "/goform/net_WebCSRGen" uri to trigger this vulnerability.

A vulnerability was found in Chengdu VEC40G 3.0. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /send_order.cgi?parameter=access_detect of the component Network Detection. The manipulation of the argument COUNT with the input 3 | netstat -an leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-228013 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An exploitable command injection vulnerability exists in the web server functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted HTTP POST can cause a privilege escalation, resulting in a root shell. An attacker can inject OS commands into the ip= parm in the "/goform/net_WebPingGetValue" URI to trigger this vulnerability.

The restricted shell interface in UCOPIA Wireless Appliance before 5.1.8 allows remote authenticated users to gain 'admin' privileges via shell metacharacters in the less command.

A vulnerability was found in D-Link DCS-931L up to 1.13.0. This affects an unknown part of the file /goform/setSysAdmin. The manipulation of the argument AdminID results in os command injection. The attack can be executed remotely. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.

Jenkins 2.73.1 and earlier, 2.83 and earlier users with permission to create or configure agents in Jenkins could configure a launch method called 'Launch agent via execution of command on master'. This allowed them to run arbitrary shell commands on the master node whenever the agent was supposed to be launched. Configuration of this launch method now requires the Run Scripts permission typically only granted to administrators.

Users with permission to create or configure agents in Jenkins 1.37 and earlier could configure an EC2 agent to run arbitrary shell commands on the master node whenever the agent was supposed to be launched. Configuration of these agents now requires the 'Run Scripts' permission typically only granted to administrators.

Improper neutralization of special elements used in an OS command in SYNO.Core.Network.PPPoE in Synology DiskStation Manager (DSM) before 6.2.3-25426-3 allows remote authenticated users to execute arbitrary code via realname parameter.

An OS command injection vulnerability in PAN-OS management interface allows an authenticated administrator to execute arbitrary OS commands with root privileges. This issue affects: All versions of PAN-OS 7.1 and 8.0; PAN-OS 8.1 versions earlier than 8.1.14; PAN-OS 9.0 versions earlier than 9.0.7.

ROOT version 6.9.03 and below is vulnerable to an authenticated shell metacharacter injection in the rootd daemon resulting in remote code execution

A remote arbitrary command execution vulnerability was discovered in Aruba ClearPass Policy Manager version(s) prior to 6.9.5, 6.8.9, 6.7.14-HF1. Aruba has released patches for Aruba ClearPass Policy Manager that address this security vulnerability.

NVIDIA DGX-1 BMC contains a vulnerability in the SPX REST API, where an attacker with the appropriate level of authorization can inject arbitrary shell commands, which may lead to code execution, denial of service, information disclosure, and data tampering.

Two OS command injection vulnerabilities exist in the zebra vlan_name functionality of Milesight UR32L v32.3.0.5. A specially crafted network request can lead to command execution. An attacker can send a network request to trigger these vulnerabilities.This command injection is in the code branch that manages an already existing vlan configuration.

A vulnerability was identified in D-Link DIR-823X 250416. The impacted element is an unknown function of the file /goform/set_mac_clone. Such manipulation of the argument mac leads to os command injection. The attack may be performed from remote. The exploit is publicly available and might be used.

A security flaw has been discovered in D-Link DIR-823X 250416. This vulnerability affects unknown code of the file /goform/set_ac_server of the component Web Management Interface. The manipulation of the argument ac_server results in os command injection. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability was found in D-Link DIR-615 4.10. This vulnerability affects unknown code of the file adv_routing.php of the component Web Configuration Interface. Performing a manipulation of the argument dest_ip/ submask/ gw results in os command injection. The attack may be initiated remotely. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.

A remote authenticated command injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): Prior to 6.9.5, 6.8.8-HF1, 6.7.14-HF1. A vulnerability in the ClearPass web-based management interface allows remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.

A remote execution of arbitrary commands vulnerability was discovered in Aruba CX 6200F Switch Series, Aruba 6300 Switch Series, Aruba 6400 Switch Series, Aruba 8320 Switch Series, Aruba 8325 Switch Series, Aruba 8400 Switch Series, Aruba CX 8360 Switch Series version(s): Aruba AOS-CX firmware: 10.04.xxxx - versions prior to 10.04.3070, 10.05.xxxx - versions prior to 10.05.0070, 10.06.xxxx - versions prior to 10.06.0110, 10.07.xxxx - versions prior to 10.07.0001. Aruba has released upgrades for Aruba AOS-CX devices that address this security vulnerability.

The specific function in ASUS BMC’s firmware Web management page (Modify user’s information function) does not filter the specific parameter. As obtaining the administrator permission, remote attackers can launch command injection to execute command arbitrary.

A command injection vulnerability may be exploited after the admin's authentication via the import of a crafted VPN client configuration file on the TP-Link Archer BE230 v1.2. Successful exploitation could allow an attacker to gain full administrative control of the device, resulting in severe compromise of configuration integrity, network security, and service availability. This CVE covers one of multiple distinct OS command injection issues identified across separate code paths. Although similar in nature, each instance is tracked under a unique CVE ID. This issue affects Archer BE230 v1.2 < 1.2.4 Build 20251218 rel.70420.

A vulnerability was determined in D-Link DIR-823X 250416. Affected by this issue is the function sub_424D20 of the file /goform/set_ipv6. Executing a manipulation can lead to os command injection. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized.