IBM DataPower Gateway appliances with firmware 6.x before 6.0.0.17, 6.0.1.x before 6.0.1.17, 7.x before 7.0.0.10, 7.1.0.x before 7.1.0.7, and 7.2.x before 7.2.0.1 do not set the secure flag for unspecified cookies in an https session, which makes it easier for remote attackers to capture these cookies by intercepting their transmission within an http session.

Unspecified vulnerability in GSKit on IBM MQ M2000 appliances before 8.0.0.4 allows remote attackers to obtain sensitive information via unknown vectors, a different vulnerability than CVE-2015-7420.

IBM WebSphere Message Broker 7 before 7.0.0.8 and 8 before 8.0.0.6 and IBM Integration Bus 9 before 9.0.0.3 and 10 before 10.0.0.0 allow remote attackers to obtain sensitive information about the HTTP server via unspecified vectors.

The DB service in IBM System Networking Switch Center (SNSC) before 7.3.1.5 and Lenovo Switch Center before 8.1.2.0 allows remote attackers to obtain sensitive administrator-account information via a request on port 40999, as demonstrated by an improperly encrypted password.

Directory traversal vulnerability in the Web Administration tool in IBM Tivoli Directory Server (ITDS) before 6.1.0.74-ISS-ISDS-IF0074, 6.2.x before 6.2.0.50-ISS-ISDS-IF0050, and 6.3.x before 6.3.0.43-ISS-ISDS-IF0043 and IBM Security Directory Server (ISDS) before 6.3.1.18-ISS-ISDS-IF0018 and 6.4.x before 6.4.0.9-ISS-ISDS-IF0009 allows remote attackers to read arbitrary files via a .. (dot dot) in a URL.

IBM Spectrum Copy Data Management 2.2.0.0 through 2.2.15.0 could allow a remote attacker to view product configuration information stored in PostgreSQL, which could be used in further attacks against the system. IBM X-Force ID: 228219.

IBM Guardium Data Encryption (GDE) 5.0.0.2 behaves differently or sends different responses under different circumstances in a way that is observable to an unauthorized actor, which could facilitate username enumeration. IBM X-Force ID: 213856.

IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, 11.1, and 11.5 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

IBM Security Guardium 10.5 and 11.3 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt sensitive information. IBM X-Force ID: 215585.

IBM Security Verify Bridge 1.0.5.0 could allow a user to obtain sensitive information due to improper certificate validation. IBM X-Force ID: 208155.

IBM QRadar WinCollect Agent 10.0 and 10.0.1 could allow an attacker to obtain sensitive information due to missing best practices. IBM X-Force ID: 213549.

IBM Sterling Connect:Direct for UNIX 1.5 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 210574.

IBM QRadar SIEM 7.3, 7.4, and 7.5 in some senarios may reveal authorized service tokens to other QRadar users. IBM X-Force ID: 210021

IBM Security Verify 10.0.0, 10.0.1.0, and 10.0.2.0 could disclose sensitive version information in HTTP response headers that could aid in further attacks against the system. IBM X-Force ID: 212038

IBM Security QRadar SIEM 7.1.x before 7.1 MR2 Patch 12 and 7.2.x before 7.2.5 Patch 6 does not properly expire sessions, which allows remote attackers to obtain sensitive information by leveraging an unattended workstation.

IBM Sterling Connect:Direct Web Services 1.0 and 6.0 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 209507.

IBM Security Access Manager for Web 7.0 before 7.0.0 IF21, 8.0 before 8.0.1.3 IF4, and 9.0 before 9.0.0.1 IF1 does not have a lockout mechanism for invalid login attempts, which makes it easier for remote attackers to obtain access via a brute-force attack.

Unspecified vulnerability in the IBM Maximo Anywhere application 7.5.1 through 7.5.1.2 for Android allows attackers to bypass a passcode protection mechanism and obtain sensitive information via a crafted application.

The SSH implementation on IBM Security Access Manager for Web appliances 7.0 before 7.0.0 FP19, 8.0 before 8.0.1.3 IF3, and 9.0 before 9.0.0.0 IF1 does not properly restrict the set of MAC algorithms, which makes it easier for remote attackers to defeat cryptographic protection mechanisms via unspecified vectors.

IBM Cognos Analytics Mobile for Android 1.1.14 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

IBM WebSphere Commerce Enterprise 7.0.0.9 and 8.x before Feature Pack 8 allows remote attackers to obtain sensitive information via a crafted REST URL.

IBM WebSphere Application Server 7.x before 7.0.0.39, 8.0.x before 8.0.0.11, and 8.5.x before 8.5.5.7 allows remote attackers to spoof servlets and obtain sensitive information via unspecified vectors.

IBM Sterling B2B Integrator Standard Edition 5.2.0. 0 through 6.1.1.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 210171.

IBM PowerVM Hypervisor FW860, FW940, FW950, and FW1010, through a specific sequence of VM management operations could lead to a violation of the isolation between peer VMs. IBM X-Force ID: 210019.

IBM Tivoli Provisioning Manager Express provides unspecified information in error messages when (1) attempted duplication of a username occurs when creating an account or (2) when trying to login using a valid username, which makes it easier for remote attackers to enumerate usernames.

IBM Guardium Data Encryption (GDE) 4.0.0.7 and lower stores sensitive information in URL parameters. This may lead to information disclosure if unauthorized parties have access to the URLs via server logs, referrer header or browser history. IBM X-Force ID: 213855.

The portal in IBM Tealeaf Customer Experience before 8.7.1.8814, 8.8 before 8.8.0.9026, 9.0.0, 9.0.0A, 9.0.1 before 9.0.1.1083, 9.0.1A before 9.0.1.5073, 9.0.2 before 9.0.2.1095, and 9.0.2A before 9.0.2.5144 allows remote attackers to read arbitrary charts by specifying an internal chart name.

IBM Security Verify Governance Identity Manager 10.0.2 could allow a remote attacker to obtain sensitive information when detailed technical error messages are returned. This information could be used in further attacks against the system.

IBM Security QRadar Incident Forensics 7.2.x before 7.2.5 Patch 5 does not set the secure flag for unspecified cookies in an https session, which makes it easier for remote attackers to capture these cookies by intercepting their transmission within an http session.

IBM Security QRadar Incident Forensics 7.2.x before 7.2.5 Patch 5 places session IDs in https URLs, which allows remote attackers to obtain sensitive information by reading (1) web-server access logs, (2) web-server Referer logs, or (3) the browser history.

The Multicast DNS (mDNS) responder in IBM Security Access Manager for Web 7.x before 7.0.0 FP12 and 8.x before 8.0.1 FP1 inadvertently responds to unicast queries with source addresses that are not link-local, which allows remote attackers to cause a denial of service (traffic amplification) or obtain potentially sensitive information via port-5353 UDP packets.

IBM Maximo Asset Management 7.1 through 7.1.1.13, 7.5.0 before 7.5.0.8 IFIX002, and 7.6.0 before 7.6.0.1 IFIX001; Maximo Asset Management 7.5.x before 7.5.0.8 IFIX002 and 7.6.0 before 7.6.0.1 IFIX001 for SmartCloud Control Desk; and Maximo Asset Management 7.1 through 7.1.1.13 and 7.2 for Tivoli IT Asset Management for IT and certain other products do not properly encrypt passwords, which makes it easier for context-dependent attackers to determine cleartext passwords by leveraging access to a password file.

The RC4 algorithm, as used in the TLS protocol and SSL protocol, does not properly combine state data with key data during the initialization phase, which makes it easier for remote attackers to conduct plaintext-recovery attacks against the initial bytes of a stream by sniffing network traffic that occasionally relies on keys affected by the Invariance Weakness, and then using a brute-force approach involving LSB values, aka the "Bar Mitzvah" issue.

IBM Security QRadar Incident Forensics 7.2.x before 7.2.5 Patch 5 does not include the HTTPOnly flag in a Set-Cookie header for the session cookie, which makes it easier for remote attackers to obtain potentially sensitive information via script access to this cookie.

IBM WebSphere Application Server 7.x before 7.0.0.39, 8.0.x before 8.0.0.11, and 8.5.x before 8.5.5.7 and WebSphere Virtual Enterprise before 7.0.0.7 allow remote attackers to obtain potentially sensitive information about the proxy-server software by reading the HTTP Via header.

The XML parser in the Reference Data Management component in the server in IBM InfoSphere Master Data Management (MDM) 10.1 before IF1, 11.0 before FP3, 11.3, and 11.4 before FP2 allows remote attackers to read arbitrary files, and consequently obtain administrative access, via an external entity declaration in conjunction with an entity reference, related to an XML External Entity (XXE) issue.

IBM WebSphere Portal 7.0.0 through 7.0.0.2 CF29, 8.0.0 before 8.0.0.1 CF17, and 8.5.0 before CF06 allows remote attackers to obtain sensitive Java Content Repository (JCR) information via a crafted request.

IBM Java 7 R1 before SR3, 7 before SR9, 6 R1 before SR8 FP4, 6 before SR16 FP4, and 5.0 before SR16 FP10 allows remote attackers to bypass "permission checks" and obtain sensitive information via vectors related to the Java Virtual Machine.

Rational Test Control Panel in IBM Rational Test Workbench and Rational Test Virtualization Server 8.0.0.x before 8.0.0.5, 8.0.1.x before 8.0.1.6, 8.5.0.x before 8.5.0.4, 8.5.1.x before 8.5.1.5, 8.6.0.x before 8.6.0.4, and 8.7.0.x before 8.7.0.2 uses the MD5 algorithm for password hashing, which makes it easier for remote attackers to bypass authentication via unspecified vectors.

IBM PowerSC 1.3, 2.0, and 2.1 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 275129.

IBM PowerSC 1.3, 2.0, and 2.1 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 275117.

The Jazz help system in IBM Rational Collaborative Lifecycle Management 4.0 through 5.0.2, Rational Quality Manager 4.0 through 4.0.7 and 5.0 through 5.0.2, Rational Team Concert 4.0 through 4.0.7 and 5.0 through 5.0.2, Rational Requirements Composer 4.0 through 4.0.7, Rational DOORS Next Generation 4.0 through 4.0.7 and 5.0 through 5.0.2, Rational Engineering Lifecycle Manager 4.0.3 through 4.0.7 and 5.0 through 5.0.2, Rational Rhapsody Design Manager 4.0 through 4.0.7 and 5.0 through 5.0.2, and Rational Software Architect Design Manager 4.0 through 4.0.7 and 5.0 through 5.0.2 allows remote attackers to read JSP source code via a crafted request.

IBM PowerSC 1.3, 2.0, and 2.1 MFA does not implement the "HTTP Strict Transport Security" (HSTS) web security policy mechanism. IBM X-Force ID: 276004.

Unspecified vulnerability in certain IBM Tivoli Storage Manager (TSM) clients 5.1 before 5.1.8.1, 5.2 before 5.2.5.2, 5.3 before 5.3.5.3, and 5.4 before 5.4.1.2, when using "server-initiated prompted scheduling," allows remote attackers to read a client's data, aka IC53616.

A vulnerability was found in ISS BlackICE PC Protection. It has been declared as problematic. Affected by this vulnerability is the component Update Handler which allows cleartext transmission of data. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

IBM Predictive Solutions Foundation (formerly PMQ) could allow a remote attacker to include arbitrary files. A remote attacker could send a specially-crafted URL to specify a file from the local system, which could allow the attacker to obtain sensitive information. IBM X-Force ID: 119618.

IBM PowerSC 1.3, 2.0, and 2.1 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 275107.

IBM WebSphere Application Server Liberty 17.0.0.3 through 24.0.0.8 could allow an attacker with access to the network to conduct spoofing attacks. An attacker could exploit this vulnerability using a certificate issued by a trusted authority to obtain sensitive information. IBM X-Force ID: 274713.

In the Message Entry and Repair (MER) facility of IBM Financial Transaction Manager for SWIFT Services 3.2.4 the sending address and the message type of FIN messages are assumed to be immutable. However, an attacker might modify these elements of a business transaction. IBM X-Force ID: 273183.

IBM CICS Transaction Gateway for Multiplatforms 9.2 and 9.3 transmits or stores authentication credentials, but it uses an insecure method that is susceptible to unauthorized interception and/or retrieval.