IBM PowerVM Hypervisor FW860, FW940, and FW950 could allow an attacker that gains service access to the FSP can read and write arbitrary host system memory through a series of carefully crafted service procedures. IBM X-Force ID: 210018.

Due to weak obfuscation, IBM Cognos Analytics Mobile for Android application prior to version 1.1.14 , an attacker could be able to reverse engineer the codebase to gain knowledge about the programming technique, interface, class definitions, algorithms and functions used. IBM X-Force ID: 215593.

IBM Spectrum Protect Plus 10.1.0.0 through 10.1.8.x uses Cross-Origin Resource Sharing (CORS) which could allow an attacker to carry out privileged actions and retrieve sensitive information due to a misconfiguration in access control headers. IBM X-Force ID: 214956.

IBM Cognos Analytics 11.1.7 11.2.0, and 11.2.1 could be vulnerable to a Server-Side Request Forgery Attack (SSRF) attack by constructing URLs from user-controlled data. This could enable attackers to make arbitrary requests to the internal network or to the local file system. IBM X-Force ID: 234180.

IBM QRadar 7.2 does not perform an authentication check for a critical resource or functionality allowing anonymous users access to protected areas. IBM Reference #: 1999545.

IBM Tivoli Key Lifecycle Manager 2.5 and 2.6 do not perform an authentication check for a critical resource or functionality allowing anonymous users access to protected areas.

IBM Open Power Firmware OP910 and OP920 could allow access to BMC via IPMI using default OpenBMC password even after BMC password was changed away from the default password. IBM X-Force ID: 158702.

IBM Cognos Analytics 11 could allow a remote attacker to traverse directories on the system. An attacker could send a specially-crafted URL request to write or view arbitrary files on the system. IBM X-Force ID: 158919.

IBM Security Guardium Big Data Intelligence (SonarG) 4.0 specifies permissions for a security-critical resource which could lead to the exposure of sensitive information or the modification of that resource by unintended parties. IBM X-Force ID: 160986.

IBM Maximo Anywhere 7.6.4.0 could allow an attacker to reverse engineer the application due to the lack of binary protection precautions. IBM X-Force ID: 160697.

The audit facility in the Security component in IBM DB2 UDB 9.5 before FP6a uses instance-level audit settings to capture connection (aka CONNECT and AUTHENTICATION) events in certain circumstances in which database-level audit settings were intended, which might make it easier for remote attackers to connect without discovery.

IBM Spectrum Protect Plus 10.1.0 through 10.1.7 uses Cross-Origin Resource Sharing (CORS) which could allow an attacker to carry out privileged actions and retrieve sensitive information as the domain name is not being limited to only trusted domains. IBM X-Force ID: 196344.

The Workplace (aka WP) component in IBM FileNet P8 Application Engine (P8AE) 4.0.2.x before 4.0.2.1-P8AE-FP001 does not record Get Content Failure Audit events, which might allow remote attackers to attempt content access without detection.

The IBM Stax XMLStreamWriter in the Web Services component in IBM WebSphere Application Server (WAS) 6.1 before 6.1.0.25 does not properly process XML encoding, which allows remote attackers to bypass intended access restrictions and possibly modify data via "XML fuzzing attacks" sent through SOAP requests.

The default configuration of TLS in IBM Tivoli Directory Server (TDS) 6.3 and earlier supports the (1) NULL-MD5 and (2) NULL-SHA ciphers, which allows remote attackers to trigger unencrypted communication via the TLS Handshake Protocol.

IBM App Connect Enterprise Certified Container 7.1, 7.2, 8.0, 8.1, 8.2, 9.0, 9.1, 9.2, 10.0, 10.1, 11.0, 11.1, 11.2, 11.3, 11.4, 11.5, 11.6, 12.0, 12.1, 12.2, 12.3, 12.4, 12.5, 12.6, and 12.7 Pods do not restrict network egress for Pods that are used for internal infrastructure.

IBM Aspera Console 3.4.0 through 3.4.2 is vulnerable to SQL injection. A remote attacker could send specially crafted SQL statements, which could allow the attacker to view, add, modify or delete information in the back-end database. IBM X-Force ID: 239079.

IBM Emptoris Sourcing 10.1.0, 10.1.1, and 10.1.3 is vulnerable to web cache poisoning, caused by improper input validation by modifying HTTP request headers. IBM X-Force ID: 190987.

A vulnerability in the Spectrum Scale 5.1 core component and IBM Elastic Storage System 6.1 could allow unauthorized access to user data or injection of arbitrary data in the communication protocol. IBM X-Force ID: 191600.

IBM Security Guardium Insights 2.0.1 could allow an attacker to obtain sensitive information or perform unauthorized actions due to improper authenciation mechanisms. IBM X-Force ID: 174403.

IBM UrbanCode Deploy (UCD) 7.1 through 7.1.2.22, 7.2 through 7.2.3.15, and 7.3 through 7.3.2.10 / IBM DevOps Deploy 8.0 through 8.0.1.5 and 8.1 through 8.1.0.1 could allow unauthorized access to other services or potential exposure of sensitive data due to missing authentication in its Agent Relay service.

IBM DevOps Deploy 8.0 through 8.0.1.4, 8.1 through 8.1.0.0 and IBM UrbanCode Deploy (UCD) 7.0 through 7.0.5.25, 7.1 through 7.1.2.21, 7.2 through 7.2.3.14 and 7.3 through 7.3.2 could allow an authenticated user to obtain sensitive information about other users on the system due to missing authorization for a function.

IBM Security Identity Governance and Intelligence 5.2.3.2 and 5.2.4 could allow an attacker to obtain sensitive information due to missing authentication in IGI for the survey application. IBM X-Force ID: 148601.

IBM webMethods Integration 10.15 could allow an authenticated user to create scheduler tasks that would allow them to escalate their privileges to administrator due to missing authentication.

A vulnerability in the combination of the OpenBMC's FW1050.00 through FW1050.10, FW1030.00 through FW1030.50, and FW1020.00 through FW1020.60 default password and session management allow an attacker to gain administrative access to the BMC. IBM X-Force ID: 290674.

IBM OpenPages with Watson 8.3 and 9.0 could allow authenticated users access to sensitive information through improper authorization controls on APIs.

IBM Guardium Data Encryption (GDE) 3.0.0.2 and 4.0.0.4 does not perform any authentication for functionality that requires a provable user identity or consumes a significant amount of resources.

IBM Spectrum Protect Plus 10.1.0 through 10.1.5 could allow an unauthenticated attacker to cause a denial of service or hijack DNS sessions by send a specially crafted HTTP command to the remote server. IBM X-Force ID: 181726.

The POWER systems FSP is vulnerable to unauthenticated logins through the serial port/TTY interface. This vulnerability can be more critical if the serial port is connected to a serial-over-lan device. IBM X-Force ID: 217095.

IBM System Storage DS8900F 89.22.19.0, 89.30.68.0, 89.32.40.0, 89.33.48.0, 89.40.83.0, and 89.40.93.0 could allow a remote user to create an LDAP connection with a valid username and empty password to establish an anonymous connection.   IBM X-Force ID: 279518.

IBM Security Guardium 10.5, 10.6, and 11.0 could allow an unauthorized user to obtain sensitive information due to missing security controls. IBM X-Force ID: 141226.

IBM Spectrum Protect Server 8.1 through 8.1.26 could allow attacker to bypass authentication due to improper session authentication which can result in access to unauthorized resources.

IBM InfoSphere Master Data Management - Collaborative Edition 11.5 could allow an unauthorized user to download reports without authentication. IBM X-Force ID: 129892.

IBM Security Identity Manager Adapters 6.0 and 7.0 does not perform an authentication check for a critical resource or functionality allowing anonymous users access to protected areas. IBM X-Force ID: 128621.

IBM Security Directory Server 6.4.0 does not perform an authentication check for a critical resource or functionality allowing anonymous users access to protected areas. IBM X-Force ID: 165953.

IBM Robotic Process Automation with Automation Anywhere 11 could allow an attacker to obtain sensitive information due to missing authentication in Ignite nodes. IBM X-Force ID: 161412.

IBM Sterling Partner Engagement Manager 6.1.2, 6.2.0, and 6.2.2 could allow a remote user to perform unauthorized actions due to improper authentication. IBM X-Force ID: 266896.

IBM Business Automation Workflow 24.0.0 and 24.0.1 through 24.0.1 IF001 Center may leak sensitive information due to missing authorization validation.

IBM Spectrum Protect Plus 10.1.0 through 10.1.6 may allow unauthenticated and unauthorized access to VDAP proxy which can result in an attacker obtaining information they are not authorized to access. IBM X-Force ID: 193658.

IBM Security Key Lifecycle Manager 2.7 and 3.0 could allow an unauthenticated user to restart the SKLM server due to missing authentication. IBM X-Force ID: 148424.

Nextcloud server is an open source, self hosted personal cloud. In affected versions an attacker is able to bypass Two Factor Authentication in Nextcloud. Thus knowledge of a password, or access to a WebAuthN trusted device of a user was sufficient to gain access to an account. It is recommended that the Nextcloud Server is upgraded to 20.0.12, 21.0.4 or 22.1.0. There are no workaround for this vulnerability.

Ballerina is an open source programming language and platform for cloud application programmers. Ballerina versions 1.2.x and SL releases up to alpha 3 have a potential for a supply chain attack via MiTM against users. Http connections did not make use of TLS and certificate checking was ignored. The vulnerability allows an attacker to substitute or modify packages retrieved from BC thus allowing to inject malicious code into ballerina executables. This has been patched in Ballerina 1.2.14 and Ballerina SwanLake alpha4.

In JetBrains Hub before 2025.3.119807 authentication bypass allowing administrative actions was possible

Langflow is a tool for building and deploying AI-powered agents and workflows. Prior to version 1.7.0.dev45, multiple critical API endpoints in Langflow are missing authentication controls. The issue allows any unauthenticated user to access sensitive user conversation data, transaction histories, and perform destructive operations including message deletion. This affects endpoints handling personal data and system operations that should require proper authorization. Version 1.7.0.dev45 contains a patch.

C&Cm@il developed by HGiga has a Missing Authentication vulnerability, allowing unauthenticated remote attackers to read and modify any user's mail content.

MOMA Seismic Station Version v2.4.2520 and prior exposes its web management interface without requiring authentication, which could allow an unauthenticated attacker to modify configuration settings, acquire device data or remotely reset the device.

An authentication bypass in the Palo Alto Networks PAN-OS software enables an unauthenticated attacker with network access to the management web interface to bypass the authentication otherwise required by the PAN-OS management web interface and invoke certain PHP scripts. While invoking these PHP scripts does not enable remote code execution, it can negatively impact integrity and confidentiality of PAN-OS. You can greatly reduce the risk of this issue by restricting access to the management web interface to only trusted internal IP addresses according to our recommended best practices deployment guidelines https://live.paloaltonetworks.com/t5/community-blogs/tips-amp-tricks-how-to-secure-the-management-access-of-your-palo/ba-p/464431 . This issue does not affect Cloud NGFW or Prisma Access software.

An exploitable information disclosure vulnerability exists in the network packet handling functionality of Shadowsocks-libev 3.3.2. When utilizing a Stream Cipher, a specially crafted set of network packets can cause an outbound connection from the server, resulting in information disclosure. An attacker can send arbitrary packets to trigger this vulnerability.

PTZOptics PT30X-SDI/NDI-xx before firmware 6.3.40 is vulnerable to an insufficient authentication issue. The camera does not properly enforce authentication to /cgi-bin/param.cgi when requests are sent without an HTTP Authorization header. The result is a remote and unauthenticated attacker can leak sensitive data such as usernames, password hashes, and configurations details. Additionally, the attacker can update individual configuration values or overwrite the whole file.

Incorrect Authorization vulnerability in the protocol communication between the WatchGuard Authentication Gateway (aka Single Sign-On Agent) on Windows and the WatchGuard Single Sign-On Client on Windows and MacOS allows Authentication Bypass.This issue affects the Authentication Gateway: through 12.10.2; Windows Single Sign-On Client: through 12.7; MacOS Single Sign-On Client: through 12.5.4.