Verizon 5G Home LVSKIHP OutDoorUnit (ODU) 3.33.101.0 does not property sanitize user-controlled parameters within the crtcswitchsimprofile function of the crtcrpc JSON listener. A remote attacker on the local network can inject shell metacharacters into /usr/lib/lua/5.1/luci/controller/rpc.lua to achieve remote code execution as root,

Addressed remote code execution vulnerability in reg_device.php due to insufficient validation of user input.in Western Digital My Cloud Devices prior to 5.4.1140.

CGI implementation in Yaws web server versions 1.81 to 2.0.7 is vulnerable to OS command injection.

A command injection vulnerability has been reported to affect QTS and QuTS hero. If exploited, this vulnerability allows attackers to execute arbitrary commands in a compromised application. We have already fixed this vulnerability in the following versions: QTS 4.5.2.1566 Build 20210202 and later QTS 4.5.1.1495 Build 20201123 and later QTS 4.3.6.1620 Build 20210322 and later QTS 4.3.4.1632 Build 20210324 and later QTS 4.3.3.1624 Build 20210416 and later QTS 4.2.6 Build 20210327 and later QuTS hero h4.5.1.1491 build 20201119 and later

An issue was discovered in Mutt before 1.10.1 and NeoMutt before 2018-07-16. They allow remote IMAP servers to execute arbitrary commands via backquote characters, related to the mailboxes command associated with a manual subscription or unsubscription.

An issue was discovered on Tenda AC7 devices with firmware through V15.03.06.44_CN(AC7), AC9 devices with firmware through V15.03.05.19(6318)_CN(AC9), and AC10 devices with firmware through V15.03.06.23_CN(AC10). A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted goform/setUsbUnload request. This occurs because the "formsetUsbUnload" function executes a dosystemCmd function with untrusted input.

Vivotek FD8136 devices allow Remote Command Injection, aka "another command injection vulnerability in our target device," a different issue than CVE-2018-14494. NOTE: The vendor has disputed this as a vulnerability and states that the issue does not cause a web server crash or have any other affect on it's performance

Totolink routers s X5000R V9.1.0u.6118_B20201102 and A7000R V9.1.0u.6115_B20201022 were discovered to contain a command injection vulnerability in the Tunnel 6rd function via the relay6rd parameter. This vulnerability allows attackers to execute arbitrary commands via a crafted request.

myStrom WiFi Switch V1 devices before 2.66 did not sanitize a parameter received from the cloud that was used in an OS command. Malicious servers were able to run operating system commands on the device.

An issue was discovered on Dasan GPON home routers. Command Injection can occur via the dest_host parameter in a diag_action=ping request to a GponForm/diag_Form URI. Because the router saves ping results in /tmp and transmits them to the user when the user revisits /diag.html, it's quite simple to execute commands and retrieve their output.

Vivotek FD8136 devices allow Remote Command Injection, related to BusyBox and wget. NOTE: the vendor sent a clarification on 2019-09-17 explaining that, although this CVE was first populated in July 2019, it is a historical vulnerability that does not apply to any current or recent Vivotek hardware or firmware

Arris routers SBR-AC1900P 1.0.7-B05, SBR-AC3200P 1.0.7-B05 and SBR-AC1200P 1.0.5-B05 were discovered to contain a command injection vulnerability in the firewall-local log function via the EmailAddress, SmtpServerName, SmtpUsername, and SmtpPassword parameters. This vulnerability allows attackers to execute arbitrary commands via a crafted request.

Remote Command Execution (RCE) vulnerability exists in HNAP1/control/SetWizardConfig.php in D-Link Router DIR-846 DIR846A1_FW100A43.bin and DIR846enFW100A53DLA-Retail.bin. Malicoius users can use this vulnerability to use "\ " or backticks in the shell metacharacters in the ssid0 or ssid1 parameters to cause arbitrary command execution. Since CVE-2019-17510 vulnerability has not been patched and improved www/hnap1/control/setwizardconfig.php, can also use line breaks and backquotes to bypass.

Arris routers SBR-AC1900P 1.0.7-B05, SBR-AC3200P 1.0.7-B05 and SBR-AC1200P 1.0.5-B05 were discovered to contain a command injection vulnerability in the pptp function via the pptpUserName and pptpPassword parameters. This vulnerability allows attackers to execute arbitrary commands via a crafted request.

InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the function sub_10F2C. This vulnerability is triggered via a crafted packet.

Totolink A830R V5.9c.4729_B20191112, A3100R V4.1.2cu.5050_B20200504, A950RG V4.1.2cu.5161_B20200903, A800R V4.1.2cu.5137_B20200730, A3000RU V5.9c.5185_B20201128, and A810R V4.1.2cu.5182_B20201026 were discovered to contain a command injection vulnerability in the function CloudACMunualUpdate, via the deviceMac and deviceName parameters. This vulnerability allows attackers to execute arbitrary commands via a crafted request.

InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the component python-lib. This vulnerability is triggered via a crafted packet.

System command injection in formDlna in TOTOLINK A3002RU version 1.0.8 allows attackers to execute system commands via the "sambaUser" POST parameter.

InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the function sub_122D0. This vulnerability is triggered via a crafted packet.

InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the function sub_12168. This vulnerability is triggered via a crafted packet.

Command-injection vulnerability in Huawei E587 3G Mobile Hotspot 11.203.27 allows remote attackers to execute arbitrary shell commands with root privileges due to an error in the Web UI.

Security Onion Solutions Squert version 1.3.0 through 1.6.7 contains a CWE-78: Improper Neutralization of Special Elements used in an OS Command (OS Command Injection) vulnerability in .inc/callback.php that can result in execution of OS Commands. This attack appear to be exploitable via Web request to .inc/callback.php with the payload in the data or obj parameters, used in autocat(). This vulnerability appears to have been fixed in 1.7.0.

The ftpd gem 0.2.1 for Ruby allows remote attackers to execute arbitrary OS commands via shell metacharacters in a LIST or NLST command argument within FTP protocol traffic.

InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the component get_cgi_from_memory. This vulnerability is triggered via a crafted packet.

Totolink A830R V5.9c.4729_B20191112, A3100R V4.1.2cu.5050_B20200504, A950RG V4.1.2cu.5161_B20200903, A800R V4.1.2cu.5137_B20200730, A3000RU V5.9c.5185_B20201128, and A810R V4.1.2cu.5182_B20201026 were discovered to contain a command injection vulnerability in the function setDeviceName, via the deviceMac and deviceName parameters. This vulnerability allows attackers to execute arbitrary commands via a crafted request.

D-Link DIR-820L 1.05B03 was discovered to contain remote command execution (RCE) vulnerability via HTTP POST to get set ccp.

Totolink routers s X5000R V9.1.0u.6118_B20201102 and A7000R V9.1.0u.6115_B20201022 were discovered to contain a command injection vulnerability in the Tunnel 6in4 function via the remote6in4 parameter. This vulnerability allows attackers to execute arbitrary commands via a crafted request.

A Command Injection vulnerability exists in Zavio IP Cameras through 1.6.3 in the General.Time.NTP.Server parameter to the sub_C8C8 function of the binary /opt/cgi/view/param, which could let a remove malicious user execute arbitrary code.

Arris routers SBR-AC1900P 1.0.7-B05, SBR-AC3200P 1.0.7-B05 and SBR-AC1200P 1.0.5-B05 were discovered to contain a command injection vulnerability in the ddns function via the DdnsUserName, DdnsHostName, and DdnsPassword parameters. This vulnerability allows attackers to execute arbitrary commands via a crafted request.

Contao Managed Edition v1.5.0 was discovered to contain a remote command execution (RCE) vulnerability via the component php_cli parameter.

A Command Injection vulnerability exists in the ap parameter to the /cgi-bin/mft/wireless_mft.cgi file in TP-Link IP Cameras TL-SC 3130, TL-SC 3130G, 3171G. and 4171G 1.6.18P12s, which could let a malicious user execute arbitrary code.

InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the component config_ovpn. This vulnerability is triggered via a crafted packet.

Totolink A830R V5.9c.4729_B20191112, A3100R V4.1.2cu.5050_B20200504, A950RG V4.1.2cu.5161_B20200903, A800R V4.1.2cu.5137_B20200730, A3000RU V5.9c.5185_B20201128, and A810R V4.1.2cu.5182_B20201026 were discovered to contain a command injection vulnerability in the function setUploadSetting, via the FileName parameter. This vulnerability allows attackers to execute arbitrary commands via a crafted request.

A Command Injection vulnerability exists in Zavio IP Cameras through 1.6.3 via the ap parameter to /cgi-bin/mft/wireless_mft.cgi, which could let a remote malicious user execute arbitrary code.

A remote code execution vulnerability exists in the WebAdmin of Sophos SG UTM before v9.705 MR5, v9.607 MR7, and v9.511 MR11

cgi-bin/admin/servetest in TP-Link IP Cameras TL-SC3130, TL-SC3130G, TL-SC3171, TL-SC3171G, and possibly other models before beta firmware LM.1.6.18P12_sign6 allows remote attackers to execute arbitrary commands via shell metacharacters in (1) the ServerName parameter and (2) other unspecified parameters.

Tenda M3 1.10 V1.0.0.12(4856) was discovered to contain a command injection vulnerability via the component /goform/exeCommand.

A Command Injection vulnerability exists in the /var/www/cgi-bin/rtpd.cgi script in D-Link IP Cameras DCS-3411/3430 firmware 1.02, DCS-5605/5635 1.01, DCS-1100L/1130L 1.04, DCS-1100/1130 1.03, DCS-1100/1130 1.04_US, DCS-2102/2121 1.05_RU, DCS-3410 1.02, DCS-5230 1.02, DCS-5230L 1.02, DCS-6410 1.00, DCS-7410 1.00, DCS-7510 1.00, and WCS-1100 1.02, which could let a remote malicious user execute arbitrary commands through the camera’s web interface.

TOTOLink A3000RU V5.9c.2280_B20180512 was discovered to contain a command injection vulnerability in the "Main" function. This vulnerability allows attackers to execute arbitrary commands via the QUERY_STRING parameter.

The web interface of multiple D-Link routers, including DIR-600 rev B (≤2.14b01) and DIR-300 rev B (≤2.13), contains an unauthenticated OS command injection vulnerability in command.php, which improperly handles the cmd POST parameter. A remote attacker can exploit this flaw without authentication to spawn a Telnet service on a specified port, enabling persistent interactive shell access as root.

Versions of the package exec-local-bin before 1.2.0 are vulnerable to Command Injection via the theProcess() functionality due to improper user-input sanitization.

All versions of the package create-choo-electron are vulnerable to Command Injection via the devInstall function due to improper user-input sanitization.

TOTOLink A810R V4.1.2cu.5182_B20201026 was discovered to contain a command injection vulnerability in the "Main" function. This vulnerability allows attackers to execute arbitrary commands via the QUERY_STRING parameter.

GIG Technology NV JumpScale Portal 7 version before commit 15443122ed2b1cbfd7bdefc048bf106f075becdb contains a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in method: notifySpaceModification; that can result in Improper validation of parameters results in command execution. This attack appear to be exploitable via Network connectivity, required minimal auth privileges (everyone can register an account). This vulnerability appears to have been fixed in After commit 15443122ed2b1cbfd7bdefc048bf106f075becdb.

Versions of the package simple-git before 3.16.0 are vulnerable to Remote Code Execution (RCE) via the clone(), pull(), push() and listRemote() methods, due to improper input sanitization. This vulnerability exists due to an incomplete fix of [CVE-2022-25912](https://security.snyk.io/vuln/SNYK-JS-SIMPLEGIT-3112221).

An OS command injection vulnerability exists in various legacy D-Link routers—including DIR-300 rev B and DIR-600 (firmware ≤ 2.13 and ≤ 2.14b01, respectively)—due to improper input handling in the unauthenticated command.php endpoint. By sending specially crafted POST requests, a remote attacker can execute arbitrary shell commands with root privileges, allowing full takeover of the device. This includes launching services such as Telnet, exfiltrating credentials, modifying system configuration, and disrupting availability. The flaw stems from the lack of authentication and inadequate sanitation of the cmd parameter.

The client in Novell GroupWise 8.0 before 8.0.3 HP2 and 2012 before SP1 HP1 allows remote attackers to execute arbitrary code or cause a denial of service (incorrect pointer dereference) via unspecified vectors.

Tenda AC9 v15.03.2.21 was discovered to contain a remote command execution (RCE) vulnerability via the vlanid parameter in the SetIPTVCfg function.

TP-LINK TL-WR840N(ES)_V6.20_180709 was discovered to contain a remote code execution (RCE) vulnerability via the function oal_wan6_setIpAddr.

All versions of the package vagrant.js are vulnerable to Command Injection via the boxAdd function due to improper input sanitization.