AutoGPT, a component of significant-gravitas/autogpt, is vulnerable to an improper neutralization of special elements used in an OS command ('OS Command Injection') due to a flaw in its shell command validation function. Specifically, the vulnerability exists in versions v0.5.0 up to but not including 5.1.0. The issue arises from the application's method of validating shell commands against an allowlist or denylist, where it only checks the first word of the command. This allows an attacker to bypass the intended restrictions by crafting commands that are executed despite not being on the allowlist or by including malicious commands not present in the denylist. Successful exploitation of this vulnerability could allow an attacker to execute arbitrary shell commands.

A vulnerability was found in Totolink X6000R AX3000 9.4.0cu.852_20230719. It has been rated as critical. This issue affects the function setWizardCfg of the file /cgi-bin/cstecgi.cgi of the component shttpd. The manipulation leads to command injection. The exploit has been disclosed to the public and may be used. The identifier VDB-254573 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

OS Command injection vulnerability in Mintzo Docker-Tester through 1.2.1 allows attackers to execute arbitrary commands via shell metacharacters in the 'ports' entry of a crafted docker-compose.yml file.

Typora 1.7.4 contains a command injection vulnerability in the PDF export preferences that allows attackers to execute arbitrary system commands. Attackers can inject malicious commands into the 'run command' input field during PDF export to achieve remote code execution.

The Web portal of the WiFi module of VPNCrypt M10 2.6.5 allows command injection via a text field, which allow full control over this module's Operating System.

An issue was discovered in Titan SpamTitan 7.07. Improper input sanitization of the parameter community on the page snmp-x.php would allow a remote attacker to inject commands into the file snmpd.conf that would allow executing commands on the target server.

An issue was found in Apache Airflow versions 1.10.10 and below. When using CeleryExecutor, if an attacker can connect to the broker (Redis, RabbitMQ) directly, it is possible to inject commands, resulting in the celery worker running arbitrary commands.

Synacor Zimbra Collaboration before 8.0.9 allows plaintext command injection during STARTTLS.

An issue was discovered in Svakom Siime Eye 14.1.00000001.3.330.0.0.3.14. A command injection vulnerability resides in the HOST/IP section of the NFS settings menu in the webserver running on the device. By injecting Bash commands via shell metacharacters here, the device executes arbitrary code with root privileges (all of the device's services are running as root).

TOTOLINK NR1800X V9.1.0u.6279_B20210910 was discovered to contain a command injection vulnerability via the OpModeCfg function at /cgi-bin/cstecgi.cgi.

ColdFusion 2018- update 4 and earlier and ColdFusion 2016- update 11 and earlier have a Command Injection via Vulnerable component vulnerability. Successful exploitation could lead to Arbitrary code execution in the context of the current user.

The reported vulnerability allows an attacker who has network access to the device to execute code with specially crafted packets in WAGO Series PFC 100 (750-81xx/xxx-xxx), Series PFC 200 (750-82xx/xxx-xxx), Series Wago Touch Panel 600 Standard Line (762-4xxx), Series Wago Touch Panel 600 Advanced Line (762-5xxx), Series Wago Touch Panel 600 Marine Line (762-6xxx) with firmware versions <=FW10.

Mail SQR Expert’s specific function has insufficient filtering for special characters. An unauthenticated remote attacker can exploit this vulnerability to perform arbitrary system command and disrupt service.

A vulnerability was detected in Edimax BR-6478AC V3 1.0.15. Impacted is the function sub_416990 of the file /boafrm/formTracerouteDiagnosticRun. The manipulation of the argument host results in os command injection. The attack can be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

IQrouter through 3.3.1, when unconfigured, has multiple remote code execution vulnerabilities in the web-panel because of Bash Shell Metacharacter Injection. Note: The vendor claims that this vulnerability can only occur on a brand-new network that, after initiating the forced initial configuration (which has a required step for setting a secure password on the system), makes this CVE invalid. This vulnerability is “true for any unconfigured release of OpenWRT, and true of many other new Linux distros prior to being configured for the first time”

GNU Bash through 4.3 bash43-025 processes trailing strings after certain malformed function definitions in the values of environment variables, which allows remote attackers to write to files or possibly have unknown other impact via a crafted environment, as demonstrated by vectors involving the ForceCommand feature in OpenSSH sshd, the mod_cgi and mod_cgid modules in the Apache HTTP Server, scripts executed by unspecified DHCP clients, and other situations in which setting the environment occurs across a privilege boundary from Bash execution. NOTE: this vulnerability exists because of an incomplete fix for CVE-2014-6271.

GNU Bash through 4.3 processes trailing strings after function definitions in the values of environment variables, which allows remote attackers to execute arbitrary code via a crafted environment, as demonstrated by vectors involving the ForceCommand feature in OpenSSH sshd, the mod_cgi and mod_cgid modules in the Apache HTTP Server, scripts executed by unspecified DHCP clients, and other situations in which setting the environment occurs across a privilege boundary from Bash execution, aka "ShellShock." NOTE: the original fix for this issue was incorrect; CVE-2014-7169 has been assigned to cover the vulnerability that is still present after the incorrect fix.

FarLinX X25 Gateway through 2014-09-25 allows command injection via shell metacharacters to sysSaveMonitorData.php, fsx25MonProxy.php, syseditdate.php, iframeupload.php, or sysRestoreX25Cplt.php.

rcube_image.php in Roundcube Webmail before 1.4.4 allows attackers to execute arbitrary code via shell metacharacters in a configuration setting for im_convert_path or im_identify_path.

In NOKIA 1350 OMS R14.2, multiple OS Command Injection vulnerabilities occurs. This vulnerability allow unauthenticated users to execute commands on the operating system.

node-dns-sync (npm module dns-sync) through 0.2.0 allows execution of arbitrary commands . This issue may lead to remote code execution if a client of the library calls the vulnerable method with untrusted input. This has been fixed in 0.2.1.

u'In the lbd service, an external user can issue a specially crafted debug command to overwrite arbitrary files with arbitrary content resulting in remote code execution.' in Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Wired Infrastructure and Networking in IPQ4019, IPQ6018, IPQ8064, IPQ8074, QCA4531, QCA9531, QCA9980

Input passed to the Pdf() function is shell escaped and passed to child_process.exec() during PDF rendering. However, the shell escape does not properly encode all special characters, namely, semicolon and curly braces. This can be abused to achieve command execution. This problem affects nodepdf 1.3.0.

Actual Analyzer through 2014-08-29 allows code execution via shell metacharacters because untrusted input is used for part of the input data passed to an eval operation.

HGiga C&Cmail CCMAILQ before olln-base-6.0-418.i386.rpm and CCMAILN before olln-base-5.0-418.i386.rpm contains insecure configurations. Attackers can exploit these flaws to access unauthorized functionality via a crafted URL.

The restapps (aka Rest Phone apps) module for Sangoma FreePBX and PBXact 13, 14, and 15 through 15.0.19.2 allows remote code execution via a URL variable to an AMI command.

openITCOCKPIT before 3.7.3 has a web-based terminal that allows attackers to execute arbitrary OS commands via shell metacharacters that are mishandled on an su command line in app/Lib/SudoMessageInterface.php.

QsanTorture in QSAN Storage Manager does not filter special parameters properly that allows remote unauthenticated attackers to inject and execute arbitrary commands. The referred vulnerability has been solved with the updated version of QSAN Storage Manager v3.3.3.

rConfig before 3.9.5 allows command injection by sending a crafted GET request to lib/crud/search.crud.php since the nodeId parameter is passed directly to the exec function without being escaped.

/cgi-bin/activate.cgi on Draytek Vigor3900, Vigor2960, and Vigor300B devices before 1.5.1 allows remote attackers to achieve command injection via a remote HTTP request in DEBUG mode.

A vulnerability was identified in Shiguangwu sgwbox N3 2.0.25. This impacts an unknown function of the file /usr/sbin/http_eshell_server of the component NETREBOOT Interface. Such manipulation leads to command injection. The attack can be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

The goform/setUsbUnload endpoint of Tenda AC15 AC1900 version 15.03.05.19 allows remote attackers to execute arbitrary system commands via the deviceName POST parameter.

A vulnerability exists in RaspAP 2.6 to 2.6.5 in the "iface" GET parameter in /ajax/networking/get_netcfg.php, when the "iface" parameter value contains special characters such as ";" which enables an unauthenticated attacker to execute arbitrary OS commands.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of TP-Link Archer A7 Firmware Ver: 190726 AC1750 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the tmpServer service, which listens on TCP port 20002. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-9662.

An issue was discovered on Xiaomi Mi Jia ink-jet printer < 3.4.6_0138. Injecting parameters to ippserver through the web management background, resulting in command execution vulnerabilities.

Improper Neutralization of Special Elements used in a Command vulnerability allows OS Command Injection via RCE. This issue affects Pandora FMS from 700 to 777.6 .

PerlSpeak through 2.01 allows attackers to execute arbitrary OS commands, as demonstrated by use of system and 2-argument open.

QSAN SANOS factory reset function does not filter special parameters. Remote attackers can use this vulnerability to inject and execute arbitrary commands without permissions. The referred vulnerability has been solved with the updated version of QSAN SANOS v2.1.0.

LPAR2RRD in 3.5 and earlier allows remote attackers to execute arbitrary commands due to insufficient input sanitization of the web GUI parameters.

BWA DiREX-Pro 1.2181 devices allow remote attackers to execute arbitrary OS commands via shell metacharacters in the PKG parameter to uninstall.php3.

Loomio version 2.22.0 allows executing arbitrary commands on the server. This is possible because the application is vulnerable to OS Command Injection.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker via the vulnerable /sqfs/lib/libsal.so.0.0 library used by a CGI application, as demonstrated by setup.cgi?token=';$HTTP_USER_AGENT;' with an OS command in the User-Agent field. This affects GC108P before 1.0.7.3, GC108PP before 1.0.7.3, GS108Tv3 before 7.0.6.3, GS110TPPv1 before 7.0.6.3, GS110TPv3 before 7.0.6.3, GS110TUPv1 before 1.0.4.3, GS710TUPv1 before 1.0.4.3, GS716TP before 1.0.2.3, GS716TPP before 1.0.2.3, GS724TPPv1 before 2.0.4.3, GS724TPv2 before 2.0.4.3, GS728TPPv2 before 6.0.6.3, GS728TPv2 before 6.0.6.3, GS752TPPv1 before 6.0.6.3, GS752TPv2 before 6.0.6.3, MS510TXM before 1.0.2.3, and MS510TXUP before 1.0.2.3.

LPAR2RRD ≤ 4.53 and ≤ 3.5 has arbitrary command injection on the application server.

Shopware is an open source eCommerce platform. Versions prior to 6.4.3.1 contain a command injection vulnerability in mail agent settings. Version 6.4.3.1 contains a patch. As workarounds for older versions of 6.1, 6.2, and 6.3, corresponding security measures are also available via a plugin.

NETGEAR DGN1000 before 1.1.00.48 is vulnerable to an authentication bypass vulnerability. A remote and unauthenticated attacker can execute arbitrary operating system commands as root by sending crafted HTTP requests to the setup.cgi endpoint. This vulnerability has been observed to be exploited in the wild since at least 2017 and specifically by the Shadowserver Foundation on 2025-02-06 UTC.

The STARTTLS implementation in MailMarshal before 7.2 allows plaintext command injection.

A vulnerability, which was classified as critical, was found in DrayTek Vigor2960 and Vigor300B 1.5.1.4. Affected is an unknown function of the file /cgi-bin/mainfunction.cgi/apmcfgupload of the component Web Management Interface. The manipulation of the argument session leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.5 is able to address this issue. It is recommended to upgrade the affected component.

A vulnerability, which was classified as critical, has been found in DrayTek Vigor2960 and Vigor300B 1.5.1.3/1.5.1.4. This issue affects some unknown processing of the file /cgi-bin/mainfunction.cgi/apmcfgupptim of the component Web Management Interface. The manipulation of the argument session leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.5 is able to address this issue. It is recommended to upgrade the affected component.

# Vulnerability in `title` function **Description**: the `title` function defined in `lib/termsupport.zsh` uses `print` to set the terminal title to a user-supplied string. In Oh My Zsh, this function is always used securely, but custom user code could use the `title` function in a way that is unsafe. **Fixed in**: [a263cdac](https://github.com/ohmyzsh/ohmyzsh/commit/a263cdac). **Impacted areas**: - `title` function in `lib/termsupport.zsh`. - Custom user code using the `title` function.