A vulnerability has been found in TOTOLINK AC1200 T8 4.1.5cu.862_B20230228 and classified as critical. Affected by this vulnerability is the function setDiagnosisCfg. The manipulation leads to os command injection. The attack can be launched remotely. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An issue in PGYER codefever v.2023.8.14-2ce4006 allows a remote attacker to execute arbitrary code via a crafted request to the branchList component.

Ajaxeplorer before 5.0.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the (1) archive_name parameter to the Power FS module (plugins/action.powerfs/class.PowerFSController.php), a (2) file name to the getTrustSizeOnFileSystem function in the File System (Standard) module (plugins/access.fs/class.fsAccessWrapper.php), or the (3) revision parameter to the Subversion Repository module (plugins/meta.svn/class.SvnManager.php).

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in D-Link DIR-600 up to 2.18. It has been rated as critical. This issue affects the function soapcgi_main of the file /soap.cgi. The manipulation of the argument service leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-273329 was assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

The improper neutralization of special elements in the parameter "host" in the CGI program of Zyxel NWA1123ACv3 firmware version 6.70(ABVT.4) and earlier, WAC500 firmware version 6.70(ABVS.4) and earlier, WAX655E firmware version 7.00(ACDO.1) and earlier, WBE530 firmware version 7.00(ACLE.1) and earlier, and USG LITE 60AX firmware version V2.00(ACIP.2) could allow an unauthenticated attacker to execute OS commands by sending a crafted cookie to a vulnerable device.

A vulnerability was found in Raisecom MSG1200, MSG2100E, MSG2200 and MSG2300 3.90. It has been declared as critical. This vulnerability affects the function sslvpn_config_mod of the file /vpn/list_vpn_web_custom.php of the component Web Interface. The manipulation of the argument template/stylenum leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-273562 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Raisecom MSG1200, MSG2100E, MSG2200 and MSG2300 3.90 and classified as critical. Affected by this issue is the function sslvpn_config_mod of the file /vpn/list_ip_network.php of the component Web Interface. The manipulation of the argument template/stylenum leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-273560. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

All versions of curling.js are vulnerable to Command Injection via the run function. The command argument can be controlled by users without any sanitization.

The ftpd gem 0.2.1 for Ruby allows remote attackers to execute arbitrary OS commands via shell metacharacters in a LIST or NLST command argument within FTP protocol traffic.

A Command Injection vulnerability exists in Zavio IP Cameras through 1.6.3 via the ap parameter to /cgi-bin/mft/wireless_mft.cgi, which could let a remote malicious user execute arbitrary code.

A Command Injection vulnerability exists in the ap parameter to the /cgi-bin/mft/wireless_mft.cgi file in TP-Link IP Cameras TL-SC 3130, TL-SC 3130G, 3171G. and 4171G 1.6.18P12s, which could let a malicious user execute arbitrary code.

Command-injection vulnerability in Huawei E587 3G Mobile Hotspot 11.203.27 allows remote attackers to execute arbitrary shell commands with root privileges due to an error in the Web UI.

**UNSUPPORTED WHEN ASSIGNED** A command injection vulnerability in the export-cgi program of Zyxel NAS326 firmware versions through V5.21(AAZF.18)C0 and NAS542 firmware versions through V5.21(ABAG.15)C0 could allow an unauthenticated attacker to execute some operating system (OS) commands by sending a crafted HTTP POST request.

A vulnerability, which was classified as critical, was found in Ruijie RG-UAC 1.0. This affects an unknown part of the file /view/userAuthentication/SSO/commit.php. The manipulation of the argument ad_log_name leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-269157 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An OS Command Injection vulnerability was found in /landrecordsys/admin/dashboard.php in PHPGurukul Land Record System v1.0, which allows remote attackers to execute arbitrary code via the "Cookie" GET request parameter.

A Command Injection vulnerability exists in the /var/www/cgi-bin/rtpd.cgi script in D-Link IP Cameras DCS-3411/3430 firmware 1.02, DCS-5605/5635 1.01, DCS-1100L/1130L 1.04, DCS-1100/1130 1.03, DCS-1100/1130 1.04_US, DCS-2102/2121 1.05_RU, DCS-3410 1.02, DCS-5230 1.02, DCS-5230L 1.02, DCS-6410 1.00, DCS-7410 1.00, DCS-7510 1.00, and WCS-1100 1.02, which could let a remote malicious user execute arbitrary commands through the camera’s web interface.

In Firefox Developer Tools it is possible that pasting the result of the 'Copy as cURL' command into a command shell on macOS will cause the execution of unintended additional bash script commands if the URL was maliciously crafted. This is the result of an issue with the native version of Bash on macOS. *Note: This issue only affects macOS. Other operating systems are unaffected.*. This vulnerability affects Firefox < 66.

The web interface of multiple D-Link routers, including DIR-600 rev B (≤2.14b01) and DIR-300 rev B (≤2.13), contains an unauthenticated OS command injection vulnerability in command.php, which improperly handles the cmd POST parameter. A remote attacker can exploit this flaw without authentication to spawn a Telnet service on a specified port, enabling persistent interactive shell access as root.

Certain EOL GeoVision devices fail to properly filter user input for the specific functionality. Unauthenticated remote attackers can exploit this vulnerability to inject and execute arbitrary system commands on the device.

A vulnerability classified as critical was found in Ruijie RG-UAC 1.0. Affected by this vulnerability is an unknown functionality of the file /view/systemConfig/reboot/reboot_commit.php. The manipulation of the argument servicename leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-269155. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability in significant-gravitas/autogpt version 0.5.1 allows an attacker to bypass the shell commands denylist settings. The issue arises when the denylist is configured to block specific commands, such as 'whoami' and '/bin/whoami'. An attacker can circumvent this restriction by executing commands with a modified path, such as '/bin/./whoami', which is not recognized by the denylist.

Bulb Security Smartphone Pentest Framework (SPF) 0.1.2 through 0.1.4 allows remote attackers to execute arbitrary commands via shell metacharacters in the hostingPath parameter to (1) SEAttack.pl or (2) CSAttack.pl in frameworkgui/ or the (3) appURLPath parameter to frameworkgui/attachMobileModem.pl.

elFinder before 2.1.48 has a command injection vulnerability in the PHP connector.

In NOKIA 1350 OMS R14.2, multiple OS Command Injection vulnerabilities occurs. This vulnerability allow unauthenticated users to execute commands on the operating system.

daemonControl in includes/functions.php in ZoneMinder before 1.32.3 allows command injection via shell metacharacters.

Tenda AC18 router V15.03.05.19 and V15.03.05.05 was discovered to contain a remote code execution (RCE) vulnerability via the Mac parameter at ip/goform/WriteFacMac.

webglimpse.cgi in Webglimpse before 2.20.0 allows remote attackers to execute arbitrary commands via shell metacharacters in the query parameter, as exploited in the wild in March 2012.

This command injection vulnerability allows attackers to execute arbitrary commands in a compromised application. QNAP have already fixed this vulnerability in the following versions of QTS and QuTS hero. QuTS hero h4.5.1.1472 build 20201031 and later QTS 4.5.1.1456 build 20201015 and later QTS 4.4.3.1354 build 20200702 and later

The Johnson Controls CK721-A controller with firmware before SSM4388_03.1.0.14_BB allows remote attackers to perform arbitrary actions via crafted packets to TCP port 41014 (aka the download port).

Linear eMerge 50P/5000P devices allow Authenticated Command Injection with root Code Execution.

There is a command injection vulnerability that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks AP management protocol) UDP port (8211). Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

OpenPanel v0.3.4 was discovered to contain an OS command injection vulnerability via the timezone parameter.

Linear eMerge E3-Series devices allow Command Injections.

The affected product is vulnerable to a command injection. An unauthenticated attacker could send commands through a malicious HTTP request which could result in remote code execution.

PowerCMS XMLRPC API provided by Alfasado Inc. contains a command injection vulnerability. Sending a specially crafted message by POST method to PowerCMS XMLRPC API may allow arbitrary Perl script execution, and an arbitrary OS command may be executed through it. Affected products/versions are as follows: PowerCMS 6.021 and earlier (PowerCMS 6 Series), PowerCMS 5.21 and earlier (PowerCMS 5 Series), and PowerCMS 4.51 and earlier (PowerCMS 4 Series). Note that all versions of PowerCMS 3 Series and earlier which are unsupported (End-of-Life, EOL) are also affected by this vulnerability.

In TOTOLINK X6000R V9.4.0cu.1041_B20240224 in the shttpd file, the Uci_Set Str function is used without strict parameter filtering. An attacker can achieve arbitrary command execution by constructing the payload.

Advantech WebAccess/SCADA, Versions 8.3.5 and prior. Multiple command injection vulnerabilities, caused by a lack of proper validation of user-supplied data, may allow remote code execution.

Accellion File Transfer Appliance version FTA_8_0_540 suffers from an instance of CWE-77: Improper Neutralization of Special Elements used in a Command ('Command Injection').

HP no Mawashimono Nikki 6.6 and earlier allows remote attackers to execute arbitrary commands via unspecified vectors, related to a "command injection vulnerability."

Blink XT2 Sync Module firmware prior to 2.13.11 allows remote attackers to execute arbitrary commands on the device due to improperly sanitized input when the device retrieves updates scripts from the internet.

vsftpd 2.3.4 downloaded between 20110630 and 20110703 contains a backdoor which opens a shell on port 6200/tcp.

LLama Factory enables fine-tuning of large language models. A critical remote OS command injection vulnerability has been identified in the LLama Factory training process. This vulnerability arises from improper handling of user input, allowing malicious actors to execute arbitrary OS commands on the host system. The issue is caused by insecure usage of the `Popen` function with `shell=True`, coupled with unsanitized user input. Immediate remediation is required to mitigate the risk. This vulnerability is fixed in 0.9.1.

A command injection have been found in YouPHPTube Encoder. A successful attack could allow an attacker to compromise the server. Exploitable unauthenticated command injections exist in YouPHPTube Encoder 2.3 a plugin for providing encoder functionality in YouPHPTube. The parameter base64Url in /objects/getSpiritsFromVideo.php is vulnerable to a command injection attack.

An exploitable command injection vulnerability exists in the Config editor of the Exhibitor Web UI versions 1.0.9 to 1.7.1. Arbitrary shell commands surrounded by backticks or $() can be inserted into the editor and will be executed by the Exhibitor process when it launches ZooKeeper. An attacker can execute any command as the user running the Exhibitor process.

A command injection have been found in YouPHPTube Encoder. A successful attack could allow an attacker to compromise the server. Exploitable unauthenticated command injections exist in YouPHPTube Encoder 2.3 a plugin for providing encoder functionality in YouPHPTube. The parameter base64Url in /objects/getImageMP4.php is vulnerable to a command injection attack.

F-RevoCRM version7.3.7 and version7.3.8 contains an OS command injection vulnerability. If this vulnerability is exploited, an attacker who can access the product may execute an arbitrary OS command on the server where the product is running.

Static code injection vulnerability in install_.php in e107 CMS 0.7.24 and probably earlier versions, when the installation script is not removed, allows remote attackers to inject arbitrary PHP code into e107_config.php via a crafted MySQL server name.

Blink XT2 Sync Module firmware prior to 2.13.11 allows remote attackers to execute arbitrary commands on the device due to improperly sanitized input when retrieving internal network configuration data.

A command injection vulnerability in Nokogiri v1.10.3 and earlier allows commands to be executed in a subprocess via Ruby's `Kernel.open` method. Processes are vulnerable only if the undocumented method `Nokogiri::CSS::Tokenizer#load_file` is being called with unsafe user input as the filename. This vulnerability appears in code generated by the Rexical gem versions v1.0.6 and earlier. Rexical is used by Nokogiri to generate lexical scanner code for parsing CSS queries. The underlying vulnerability was addressed in Rexical v1.0.7 and Nokogiri upgraded to this version of Rexical in Nokogiri v1.10.4.

Tenda AC6 US_AC6V1.0BR_V15.03.05.16_multi_TD01.bin function 'sub_3A1D0' contains a command execution vulnerability.