An issue was discovered in KaiOS 3.0 before 3.1. The /system/bin/tctweb_server binary exposes a local web server that responds to GET and POST requests on port 2929. The server accepts arbitrary Bash commands and executes them as root. Because it is not permission or context restricted and returns proper CORS headers, it's accessible to all websites via the browser. At a bare minimum, this allows an attacker to retrieve a list of the user's installed apps, notifications, and downloads. It also allows an attacker to delete local files and modify system properties including the boolean persist.moz.killswitch property (which would render the device inoperable). This vulnerability is partially mitigated by SELinux which prevents reads, writes, or modifications to files or permissions within protected partitions.

xml_security.rb in the ruby-saml gem before 1.0.0 for Ruby allows XPath injection and code execution because prepared statements are not used.

TOTOLINK X5000R V9.1.0u.6118_B20201102 and V9.1.0u.6369_B20230113 contain a command insertion vulnerability in setOpModeCfg. This vulnerability allows an attacker to execute arbitrary commands through the "hostName" parameter.

TOTOLink A7100RU V7.4cu.2313_B20191024 was discovered to contain a command injection vulnerability via the staticGw parameter at /setting/setWanIeCfg.

A remote command execution (RCE) vulnerability in the /api/runscript endpoint of FUXA 1.1.13 allows attackers to execute arbitrary commands via a crafted POST request.

TN-4900 Series firmware versions v1.2.4 and prior and TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command injection vulnerability. This vulnerability stems from insufficient input validation in the key-generation function, which could potentially allow malicious users to execute remote code on affected devices.

A vulnerability was found in Wavlink WL-WN578W2 221110. The impacted element is the function sub_409184 of the file /wizard_rep.shtml. The manipulation of the argument sel_EncrypTyp results in command injection. The attack may be performed from remote. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

TN-4900 Series firmware versions v1.2.4 and prior and TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command injection vulnerability. This vulnerability stems from inadequate input validation in the certificate management function, which could potentially allow malicious users to execute remote code on affected devices.

A security vulnerability has been detected in MiczFlor RPi-Jukebox-RFID up to 2.8.0. Affected by this issue is some unknown functionality of the file /htdocs/api/playlist/playsinglefile.php. The manipulation of the argument File leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A Command Injection vulnerability in Juniper Networks Junos Space allows an unauthenticated, network-based attacker sending a specially crafted request to execute arbitrary shell commands on the Junos Space Appliance, leading to remote command execution by the web application, gaining complete control of the device. A specific script in the Junos Space web application allows attacker-controlled input from a GET request without sufficient input sanitization. A specially crafted request can exploit this vulnerability to execute arbitrary shell commands on the Junos Space Appliance. This issue affects Junos Space 24.1R1. Previous versions of Junos Space are unaffected by this vulnerability.

There is a command injection vulnerability in the Netgear R6250 router with Firmware Version 1.0.4.48. If an attacker gains web management privileges, they can inject commands into the post request parameters, thereby gaining shell privileges.

TOTOLINK X5000R V9.1.0u.6118_B20201102 and V9.1.0u.6369_B20230113 contains a command insertion vulnerability in setDiagnosisCfg.This vulnerability allows an attacker to execute arbitrary commands through the "ip" parameter.

D-Link DIR-600 Hardware Version B5, Firmware Version 2.18 was discovered to contain a command injection vulnerability via the ST parameter in the lxmldbc_system() function.

A command injection vulnerability in the hostTime parameter in the function NTPSyncWithHostof TOTOLINK CP300+ V5.2cu.7594_B20200910 allows attackers to execute arbitrary commands via a crafted http packet.

A Command Injection vulnerability in Edimax Wireless Router N300 Firmware BR-6428NS_v4 allows attacker to execute arbitrary code via the setWAN function in /bin/webs without any limitations.

A Command Injection vulnerability in Edimax Wireless Router N300 Firmware BR-6428NS_v4 allows attacker to execute arbitrary code via the formAccept function in /bin/webs without any limitations.

A command injection vulnerability in egg-scripts <v2.8.1 allows arbitrary shell command execution through a maliciously crafted command line argument.

A vulnerability classified as critical has been found in Tenda AC500 2.0.1.9(1307). Affected is the function formWriteFacMac of the file /goform/WriteFacMac. The manipulation of the argument mac leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-261144. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

The pdfinfojs NPM module versions <= 0.3.6 has a command injection vulnerability that allows an attacker to execute arbitrary commands on the victim's machine.

A command execution vulnerability exists in the validate.so diag_ping_start functionality of Yifan YF325 v1.0_20221108. A specially crafted network request can lead to command execution. An attacker can send a network request to trigger this vulnerability.

TOTOLINK A3300R v17.0.0cu.557 is vulnerable to Command Injection via /cgi-bin/cstecgi.cgi.

In Fibaro Home Center 2 and Lite devices with firmware version 4.540 and older an authenticated user can run commands as root user using a command injection vulnerability.

An issue was discovered in SeaCMS <=12.9 which allows remote attackers to execute arbitrary code via admin_ping.php.

There is a command injection vulnerability in the adslr VW2100 router with firmware version M1DV1.0. An unauthenticated attacker can exploit the vulnerability to execute system commands as the root user.

If exploited, this command injection vulnerability could allow remote attackers to execute arbitrary commands. This issue affects: QNAP Systems Inc. Music Station versions prior to 5.1.13; versions prior to 5.2.9; versions prior to 5.3.11.

In Progress Telerik UI for WPF versions prior to 2024 Q3 (2024.3.924), a command injection attack is possible through improper neutralization of hyperlink elements.

inventory in Atos Unify OpenScape 4000 Platform and OpenScape 4000 Manager Platform 10 R1 before 10 R1.34.4 allows an unauthenticated attacker to run arbitrary commands on the platform operating system and achieve administrative access, aka OSFOURK-23543.

Shenzen Tenda Technology IP Camera CP3 V11.10.00.2211041355 allows unauthenticated remote code execution via an XML document.

A vulnerability classified as critical has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. Affected is the function cgi_FMT_R12R5_1st_DiskMGR of the file /cgi-bin/hd_config.cgi. The manipulation of the argument f_source_dev leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

A vulnerability, which was classified as critical, has been found in TOTOLINK CP900 6.3c.566. This issue affects the function setTelnetCfg of the component Telnet Service. The manipulation of the argument telnet_enabled leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-273557 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

TOTOLINK X18 V9.1.0cu.2024_B20220329 was discovered to contain a command injection vulnerability via the FileName parameter in the UploadFirmwareFile function.

TOTOLINK X18 V9.1.0cu.2024_B20220329 was discovered to contain a command injection vulnerability via the ip parameter in the setDiagnosisCfg function.

TOTOLINK X18 V9.1.0cu.2024_B20220329 was discovered to contain a command injection vulnerability via the pid parameter in the disconnectVPN function.

webservice in Atos Unify OpenScape 4000 Platform and OpenScape 4000 Manager Platform 10 R1 before 10 R1.34.4 allows an unauthenticated attacker to run arbitrary commands on the platform operating system and achieve administrative access, aka OSFOURK-23710.

inventory in Atos Unify OpenScape 4000 Platform and OpenScape 4000 Manager Platform 10 R1 before 10 R1.34.4 allows an unauthenticated attacker to run arbitrary commands on the platform operating system and achieve administrative access, aka OSFOURK-23552.

TOTOLINK X18 V9.1.0cu.2024_B20220329 was discovered to contain multiple command injection vulnerabilities via the rtLogEnabled and rtLogServer parameters in the setSyslogCfg function.

A vulnerability was found in Edimax IC-6220DC and IC-5150W up to 3.06. It has been rated as critical. Affected by this issue is the function cgiFormString of the file ipcam_cgi. The manipulation of the argument host leads to command injection. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Command Injection vulnerability in MagnusSolution magnusbilling 6.x and 7.x allows remote attackers to run arbitrary commands via unauthenticated HTTP request.

Tenda AC18 v15.03.05.19(6318_)_cn was discovered to contain a command injection vulnerability via the deviceName parameter in the setUsbUnload function.

TOTOLINK X18 V9.1.0cu.2024_B20220329 was discovered to contain a command injection vulnerability via the command parameter in the setTracerouteCfg function.

Roundcube Webmail before 1.5.7 and 1.6.x before 1.6.7 on Windows allows command injection via im_convert_path and im_identify_path. NOTE: this issue exists because of an incomplete fix for CVE-2020-12641.

A vulnerability has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814 and classified as critical. Affected by this vulnerability is the function cgi_s3 of the file /cgi-bin/s3.cgi of the component HTTP POST Request Handler. The manipulation of the argument f_a_key leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

huedawn-tesseract 0.3.3 and dawnsparks-node-tesseract 0.4.0 to 0.4.1 was discovered to contain a remote code execution (RCE) vulnerability via the child_process function.

A vulnerability, which was classified as critical, was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. Affected is the function cgi_s3_modify of the file /cgi-bin/s3.cgi of the component HTTP POST Request Handler. The manipulation of the argument f_job_name leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

A vulnerability classified as critical was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. This vulnerability affects the function cgi_unzip of the file /cgi-bin/webfile_mgr.cgi of the component HTTP POST Request Handler. The manipulation of the argument path leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

A vulnerability was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. It has been rated as critical. This issue affects the function cgi_FMT_Std2R5_1st_DiskMGR of the file /cgi-bin/hd_config.cgi of the component HTTP POST Request Handler. The manipulation of the argument f_source_dev leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

Brackets versions 1.14 and earlier have a command injection vulnerability. Successful exploitation could lead to arbitrary code execution.

Osprey Pump Controller version 1.01 contains an unauthenticated command injection vulnerability that could allow system access with www-data permissions.