Previous releases of the Puppet device_manager module creates configuration files containing credentials that are world readable. This issue has been resolved as of device_manager 2.7.0.

Previous releases of the Puppet cisco_ios module output SSH session debug information including login credentials to a world readable file on every run. These issues have been resolved in the 0.4.0 release.

Puppet Enterprise before 3.0.1 uses HTTP responses that contain sensitive information without the "no-cache" setting, which might allow local users to obtain sensitive information such as (1) host name, (2) MAC address, and (3) SSH keys via the web browser cache.

lib/puppet/defaults.rb in Puppet 2.7.x before 2.7.18, and Puppet Enterprise before 2.5.2, uses 0644 permissions for last_run_report.yaml, which allows local users to obtain sensitive configuration information by leveraging access to the puppet master server to read this file.

A flaw was divered in Puppet Enterprise and other Puppet products where sensitive plan parameters may be logged

Puppet Labs Facter 1.6.0 through 2.4.0 allows local users to obtains sensitive Amazon EC2 IAM instance metadata by reading a fact for an Amazon EC2 node.

In Puppet Discovery prior to 1.2.0, when running Discovery against Windows hosts, WinRM connections can fall back to using basic auth over insecure channels if a HTTPS server is not available. This can expose the login credentials being used by Puppet Discovery.

A vulnerability in the Virtual Network Function Manager's (VNFM) logging function of Cisco Ultra Services Platform could allow an authenticated, local attacker to view sensitive data (cleartext credentials) on an affected system. More Information: CSCvd29355. Known Affected Releases: 21.0.v0.65839.

KNIME Server before 4.12.6 and 4.13.x before 4.13.4 (when installed in unattended mode) keeps the administrator's password in a file without appropriate file access controls, allowing all local users to read its content.

A BIOS password extraction vulnerability has been reported on certain consumer notebooks with firmware F.22 and others. The BIOS password was stored in CMOS in a way that allowed it to be extracted. This applies to consumer notebooks launched in early 2014.

Certain NETGEAR devices are affected by disclosure of administrative credentials. This affects R6700v2 before 1.1.0.38, R6800 before 1.1.0.38, and D7000 before 1.0.1.50.

The iOS mobile application BlueCats Reveal before 5.14 stores the username and password in the app cache as base64 encoded strings, i.e. clear text. These persist in the cache even if the user logs out. This can allow an attacker to compromise the affected BlueCats network implementation. The attacker would first need to gain physical control of the iOS device or compromise it with a malicious app.

Certain NETGEAR devices are affected by disclosure of administrative credentials. This affects R6700v2 before 1.1.0.38, R6800 before 1.1.0.38, and D7000 before 1.0.1.50.

A vulnerability has been identified in ModelSim Simulation (All versions), Questa Simulation (All versions). The RSA white-box implementation in affected applications insufficiently protects the built-in private keys that are required to decrypt electronic intellectual property (IP) data in accordance with the IEEE 1735 recommended practice. This could allow a sophisticated attacker to discover the keys, bypassing the protection intended by the IEEE 1735 recommended practice.

CloudForms stores user passwords in recoverable format

A unprotected storage of credentials in Fortinet FortiSIEM Windows Agent version 4.1.4 and below allows an authenticated user to disclosure agent password due to plaintext credential storage in log files

IBM Cognos Analytics 11.0 could store cached credentials locally that could be obtained by a local user. IBM X-Force ID: 136824.

The Android mobile application BlueCats Reveal before 3.0.19 stores the username and password in a clear text file. This file persists until the user logs out or the session times out from non-usage (30 days of no user activity). This can allow an attacker to compromise the affected BlueCats network implementation. The attacker would first need to gain physical control of the Android device or compromise it with a malicious app.

IBM BigFix Compliance Analytics 1.9.79 (TEMA SUAv1 SCA SCM) stores user credentials in clear text which can be read by a local user. IBM X-Force ID: 123676.

IBM Watson Studio Local 1.2.3 stores key files in the user's home directory which could be obtained by another local user. IBM X-Force ID: 161413.

Cloud Foundry CredHub CLI, versions prior to 2.2.1, inadvertently writes authentication credentials provided via environment variables to its persistent config file. A local authenticated malicious user with access to the CredHub CLI config file can use these credentials to retrieve and modify credentials stored in CredHub that are authorized to the targeted user.

IBM Spectrum Protect Plus 10.1.2 may display the vSnap CIFS password in the IBM Spectrum Protect Plus Joblog. This can result in an attacker gaining access to sensitive information as well as vSnap. IBM X-Force ID: 162173.

IBM Security Verify Bridge 1.0.5.0 stores user credentials in plain clear text which can be read by a locally authenticated user. IBM X-Force ID: 208154.

Crestron AM-100 with firmware 1.6.0.2 and AM-101 with firmware 2.7.0.2 stores usernames, passwords, and other configuration options in the file generated via the "export configuration" feature. The configuration file is encrypted using the awenc binary. The same binary can be used to decrypt any configuration file since all the encryption logic is hard coded. A local attacker can use this vulnerability to gain access to devices username and passwords.

IBM Cognos Analytics 11.1.7, 11.2.0, and 11.2.1 could allow a local attacker to obtain information due to the autocomplete feature on password input fields. IBM X-Force ID: 214345.

IBM QRadar SIEM 7.3.0 through 7.3.3 uses weak credential storage in some instances which could be decrypted by a local attacker. IBM X-Force ID: 164429.

IBM Security Guardium Big Data Intelligence (SonarG) 4.0 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 160987.

Claws Mail vCalendar plugin: credentials exposed on interface

IBM Cognos Analytics 11.2.0, 11.2.1, 11.2.2, 11.2.3, 11.2.4, 12.0.0, 12.0.1, 12.0.2, 12.0.3, and IBM Cognos Analytics Reports for iOS 11.0.0.7 could allow a local attacker to obtain sensitive information in the form of an API key. An attacker could use this information to launch further attacks against affected applications.

Dell EMC Avamar Server version 19.4 contains a plain-text password storage vulnerability in AvInstaller. A local attacker could potentially exploit this vulnerability, leading to the disclosure of certain user credentials. The attacker may be able to use the exposed credentials to access the vulnerable application with privileges of the compromised account.

An information disclosure vulnerability [CWE-200] in FortiAnalyzerVM and FortiManagerVM versions 7.0.0 and 6.4.6 and below may allow an authenticated attacker to read the FortiCloud credentials which were used to activate the trial license in cleartext.

In PEPPERL+FUCHS WirelessHART-Gateway <= 3.0.9 a form contains a password field with autocomplete enabled. The stored credentials can be captured by an attacker who gains control over the user's computer. Therefore the user must have logged in at least once.

A vulnerability in the CLI interface of Cisco SD-WAN vManage Software could allow an authenticated, local attacker to read arbitrary files on the underlying file system of an affected system. This vulnerability exists because access to sensitive information on an affected system is not sufficiently controlled. An attacker could exploit this vulnerability by gaining unauthorized access to sensitive information on an affected system. A successful exploit could allow the attacker to create forged authentication requests and gain unauthorized access to the web UI of an affected system.

A vulnerability in the CLI of Cisco Prime Infrastructure and Cisco Evolved Programmable Network (EPN) Manager could allow an authenticated, local attacker to access sensitive information stored on the underlying file system of an affected system. This vulnerability exists because sensitive information is not sufficiently secured when it is stored. An attacker could exploit this vulnerability by gaining unauthorized access to sensitive information on an affected system. A successful exploit could allow the attacker to create forged authentication requests and gain unauthorized access to the affected system.

Insufficiently protected credentials in USB provisioning for Intel(R) AMT SDK before version 16.0.3, Intel(R) SCS before version 12.2 and Intel(R) MEBx before versions 11.0.0.0012, 12.0.0.0011, 14.0.0.0004 and 15.0.0.0004 may allow an unauthenticated user to potentially enable information disclosure via physical access.

Unprotected Transport of Credentials vulnerability in SiteManager provisioning service allows local attacker to capture credentials if the service is used after provisioning. This issue affects: Secomea SiteManager All versions prior to 9.5 on Hardware.

GGLocker iOS application, contains an insecure data storage of the password hash value which results in an authentication bypass.

Users with appropriate file access may be able to access unencrypted user credentials saved by MongoDB Extension for VS Code in a binary file. These credentials may be used by malicious attackers to perform unauthorized actions. This vulnerability affects all MongoDB Extension for VS Code including and prior to version 0.7.0

IBM MQ Advanced Cloud Pak (IBM Cloud Private 1.0.0 through 3.0.1) stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 159465.

Tauri is a framework for building binaries for all major desktop platforms. This advisory is not describing a vulnerability in the Tauri code base itself but a commonly used misconfiguration which could lead to leaking of the private key and updater key password into bundled Tauri applications using the Vite frontend in a specific configuration. The Tauri documentation used an insecure example configuration in the `Vite guide` to showcase how to use Tauri together with Vite. Copying the following snippet `envPrefix: ['VITE_', 'TAURI_'],` from this guide into the `vite.config.ts` of a Tauri project leads to bundling the `TAURI_PRIVATE_KEY` and `TAURI_KEY_PASSWORD` into the Vite frontend code and therefore leaking this value to the released Tauri application. Using the `envPrefix: ['VITE_'],` or any other framework than Vite means you are not impacted by this advisory. Users are advised to rotate their updater private key if they are affected by this (requires Tauri CLI >=1.5.5). After updating the envPrefix configuration, generate a new private key with `tauri signer generate`, saving the new private key and updating the updater's `pubkey` value on `tauri.conf.json` with the new public key. To update your existing application, the next application build must be signed with the older private key in order to be accepted by the existing application.

Unprotected Storage of Credentials vulnerability in McAfee Advanced Threat Defense (ATD) prior to 4.8 allows local attacker to gain access to the root password via accessing sensitive files on the system. This was originally published with a CVSS rating of High, further investigation has resulted in this being updated to Critical. The root password is common across all instances of ATD prior to 4.8. See the Security bulletin for further details

An issue was discovered in PRTG 7.x through 19.4.53. Due to insufficient access control on local registry keys for the Core Server Service, a non-administrative user on the local machine is able to access administrative credentials.

MySQL-GUI-tools (mysql-administrator) leaks passwords into process list after with launch of mysql text console

IBM Spectrum Protect 7.1 and 8.1 (formerly Tivoli Storage Manager) disclosed unencrypted login credentials to Vmware vCenter in the application trace output which could be obtained by a local user. IBM X-Force ID: 126875.

CF CLI version prior to v6.45.0 (bosh release version 1.16.0) writes the client id and secret to its config file when the user authenticates with --client-credentials flag. A local authenticated malicious user with access to the CF CLI config file can act as that client, who is the owner of the leaked credentials.

An attacker with physical access to the host can extract the secrets from the registry and create valid JWT tokens for the Fresenius Kabi Vigilant MasterMed version 2.0.1.3 application and impersonate arbitrary users. An attacker could manipulate RabbitMQ queues and messages by impersonating users.

IBM Security Identity Manager Adapters 6.0 and 7.0 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 126801.

IBM Storage Defender - Resiliency Service 2.0 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 278748.

IBM UrbanCode Deploy (UCD) 7.0.4.0 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 171250.