Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remote attacker to perform the following actions: Log in with a default credential if the Telnet protocol is enabled Perform command injection Modify the configuration For more information about these vulnerabilities, see the Details section of this advisory.

Dell Unity, version(s) 5.4 and prior, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to arbitrary command execution as root. Exploitation may lead to a system take over by an attacker. This vulnerability is considered critical as it can be leveraged to completely compromise the operating system. Dell recommends customers to upgrade at the earliest opportunity.

An OS command injection vulnerability exists in the device network settings functionality of reolink RLC-410W v3.0.0.136_20121102. At [1] or [2], based on DDNS type, the ddns->password variable, that has the value of the password parameter provided through the SetDdns API, is not validated properly. This would lead to an OS command injection.

Hardcoded manufacturer credentials and an OS command injection vulnerability in the /cgi-bin/mft/ directory on ABUS TVIP TVIP20050 LM.1.6.18, TVIP10051 LM.1.6.18, TVIP11050 MG.1.6.03.05, TVIP20550 LM.1.6.18, TVIP10050 LM.1.6.18, TVIP11550 MG.1.6.03, TVIP21050 MG.1.6.03, and TVIP51550 MG.1.6.03 cameras allow remote attackers to execute code as root.

A command injection vulnerability in the web interface of the Zyxel NWA-1100-NH firmware could allow an attacker to execute arbitrary OS commands on the device.

A vulnerability was found in Totolink A8000RU 7.1cu.643_b20200521. This vulnerability affects the function setUrlFilterRules of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument enable results in os command injection. The attack can be launched remotely. The exploit has been made public and could be used.

A vulnerability was determined in Totolink A8000RU 7.1cu.643_b20200521. This issue affects the function setPptpServerCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. This manipulation of the argument enable causes os command injection. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability was detected in Totolink A8000RU 7.1cu.643_b20200521. Affected by this issue is the function setStaticDhcpRules of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. The manipulation of the argument enable results in os command injection. The attack may be performed from remote. The exploit is now public and may be used.

BinderHub is a kubernetes-based cloud service that allows users to share reproducible interactive computing environments from code repositories. In affected versions a remote code execution vulnerability has been identified in BinderHub, where providing BinderHub with maliciously crafted input could execute code in the BinderHub context, with the potential to egress credentials of the BinderHub deployment, including JupyterHub API tokens, kubernetes service accounts, and docker registry credentials. This may provide the ability to manipulate images and other user created pods in the deployment, with the potential to escalate to the host depending on the underlying kubernetes configuration. Users are advised to update to version 0.2.0-n653. If users are unable to update they may disable the git repo provider by specifying the `BinderHub.repo_providers` as a workaround.

IBM Spectrum Copy Data Management 2.2.13 and earlier could allow a remote attacker to execute arbitrary commands on the system, caused by improper validation of user-supplied input by the Spectrum Copy Data Management Admin Console login and uploadcertificate function . A remote attacker could inject arbitrary shell commands which would be executed on the affected system. IBM X-Force ID: 214958.

Network Attached Storage on LG N1T1*** 10124 devices allows an unauthenticated attacker to gain root access via OS command injection in the en/ajp/plugins/access.ssh/checkInstall.php destServer parameter.

The Sangfor Next-Gen Application Firewall version NGAF8.0.17 is vulnerable to an operating system command injection vulnerability. A remote and unauthenticated attacker can execute arbitrary commands by sending a crafted HTTP POST request to the /LogInOut.php endpoint. This is due to mishandling of shell meta-characters in the "un" parameter.

A vulnerability has been found in Totolink A8000RU 7.1cu.643_b20200521. This issue affects the function UploadOpenVpnCert of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. The manipulation of the argument FileName leads to os command injection. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used.

The HGiga OAKlouds mobile portal does not filter special characters of the Ethernet number parameter of the network interface card setting page. Remote attackers can use this vulnerability to perform command injection and execute arbitrary commands in the system without logging in.

Shopware is an open source eCommerce platform. Versions prior to 6.4.3.1 contain a command injection vulnerability in mail agent settings. Version 6.4.3.1 contains a patch. As workarounds for older versions of 6.1, 6.2, and 6.3, corresponding security measures are also available via a plugin.

Nagios XI WatchGuard Wizard before version 1.4.8 is vulnerable to remote code execution through Improper neutralisation of special elements used in an OS Command (OS Command injection).

A vulnerability was identified in Totolink A8000RU 7.1cu.643_b20200521. The impacted element is the function setWanCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Such manipulation of the argument enabled leads to os command injection. The attack may be performed from remote. The exploit is publicly available and might be used.

# Vulnerability in `pygmalion`, `pygmalion-virtualenv` and `refined` themes **Description**: these themes use `print -P` on user-supplied strings to print them to the terminal. All of them do that on git information, particularly the branch name, so if the branch has a specially-crafted name the vulnerability can be exploited. **Fixed in**: [b3ba9978](https://github.com/ohmyzsh/ohmyzsh/commit/b3ba9978). **Impacted areas**: - `pygmalion` theme. - `pygmalion-virtualenv` theme. - `refined` theme.

# Vulnerability in `title` function **Description**: the `title` function defined in `lib/termsupport.zsh` uses `print` to set the terminal title to a user-supplied string. In Oh My Zsh, this function is always used securely, but custom user code could use the `title` function in a way that is unsafe. **Fixed in**: [a263cdac](https://github.com/ohmyzsh/ohmyzsh/commit/a263cdac). **Impacted areas**: - `title` function in `lib/termsupport.zsh`. - Custom user code using the `title` function.

The HGiga OAKlouds mobile portal does not filter special characters of the IPv6 Gateway parameter of the network interface card setting page. Remote attackers can use this vulnerability to perform command injection and execute arbitrary commands in the system without logging in.

Zoho ManageEngine ADManager Plus version 7110 and prior has a Post-Auth OS command injection vulnerability.

A Command Injection vulnerability exists in the getTopologyHistory service of the Apache Storm 2.x prior to 2.2.1 and Apache Storm 1.x prior to 1.2.4. A specially crafted thrift request to the Nimbus server allows Remote Code Execution (RCE) prior to authentication.

Nagios XI Switch Wizard before version 2.5.7 is vulnerable to remote code execution through improper neutralisation of special elements used in an OS Command (OS Command injection).

OS command injection vulnerability exists in KB-AHR series and KB-IRIP series. If this vulnerability is exploited, an arbitrary OS command may be executed on the product or the device settings may be altered. Affected products and versions are as follows: KB-AHR04D versions prior to 91110.1.101106.78, KB-AHR08D versions prior to 91210.1.101106.78, KB-AHR16D versions prior to 91310.1.101106.78, KB-IRIP04A versions prior to 95110.1.100290.78A, KB-IRIP08A versions prior to 95210.1.100290.78A, and KB-IRIP16A versions prior to 95310.1.100290.78A.

There is a command injection vulnerability in the underlying deauthentication service that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

The Sangfor Next-Gen Application Firewall version NGAF8.0.17 is vulnerable to an operating system command injection vulnerability. A remote and unauthenticated attacker can execute arbitrary commands by sending a crafted HTTP POST request to the /cgi-bin/login.cgi endpoint. This is due to mishandling of shell meta-characters in the PHPSESSID cookie.

ping.cgi on NETGEAR DGN2200 devices with firmware through 10.0.0.50 allows remote authenticated users to execute arbitrary OS commands via shell metacharacters in the ping_IPAddr field of an HTTP POST request.

TOTOLINK X5000R V9.1.0u.6118_B20201102 and V9.1.0u.6369_B20230113 contain a command insertion vulnerability in setting/setTracerouteCfg. This vulnerability allows an attacker to execute arbitrary commands through the "command" parameter.

A vulnerability, which was classified as critical, has been found in MailCleaner up to 2023.03.14. This issue affects some unknown processing of the component Email Handler. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-262307.

Sunhillo SureLine before 8.7.0.1.1 allows Unauthenticated OS Command Injection via shell metacharacters in ipAddr or dnsAddr /cgi/networkDiag.cgi.

Command Injection vulnerability in OpenWB 1.6 and 1.7 allows remote attackers to run arbitrary commands via crafted GET request.

An Improper Neutralization of Special Elements (in an OS command) issue was discovered in Geutebruck IP Camera G-Cam/EFD-2250 Version 1.11.0.12. An improper neutralization of special elements vulnerability has been identified. If special elements are not properly neutralized, an attacker can call multiple parameters that can allow access to the root level operating system which could allow remote code execution.

In ProLink PRC2402M V1.0.18 and older, the set_TR069 function in the adm.cgi binary, accessible with a page parameter value of TR069 contains a trivial command injection where the value of the TR069_local_port parameter is passed directly to system.

A flaw was found in the Samba printing subsystem. Samba passes the client-controlled job description string to the command configured with the "print command" setting via the "%J" substitution character without escaping shell meta characters. A remote attacker could exploit this vulnerability by sending a specially crafted print job description that contains unescaped shell characters. This could lead to remote code execution on the affected system.

Dell VNX2 for file version 8.1.21.266 and earlier, contain an unauthenticated remote code execution vulnerability which may lead unauthenticated users to execute commands on the system.

In ProLink PRC2402M V1.0.18 and older, the set_sys_cmd function in the adm.cgi binary, accessible with a page parameter value of sysCMD contains a trivial command injection where the value of the command parameter is passed directly to system.

Realtek Jungle SDK version v2.x up to v3.4.14B provides a diagnostic tool called 'MP Daemon' that is usually compiled as 'UDPServer' binary. The binary is affected by multiple memory corruption vulnerabilities and an arbitrary command injection vulnerability that can be exploited by remote unauthenticated attackers.

A command injection vulnerability in the web server of some Hikvision product. Due to the insufficient input validation, attacker can exploit the vulnerability to launch a command injection attack by sending some messages with malicious commands.

A vulnerability was found in TOTOLINK EX1800T 9.1.0cu.2112_B20220316. It has been rated as critical. Affected by this issue is the function setWiFiExtenderConfig of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument apcliKey/key leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical has been found in TOTOLINK EX1800T 9.1.0cu.2112_B20220316. This affects the function setDmzCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ip leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

The ZyXEL P660HN-T1A v1 TCLinux Fw $7.3.15.0 v001 / 3.40(ULM.0)b31 router distributed by TrueOnline has a command injection vulnerability in the Remote System Log forwarding function, which is accessible by an unauthenticated user. The vulnerability is in the ViewLog.asp page and can be exploited through the remote_host parameter.

An OS command injection vulnerability in the /stream-to-vlc Express route in hitarth-gg Zenshin before 2.7.0 allows remote attackers to execute arbitrary commands via the url parameter.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of CentOS Web Panel cwp-e17.0.9.8.923. Authentication is not required to exploit this vulnerability. The specific flaw exists within ajax_admin_apis.php. When parsing the line parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9721.

A command injection vulnerability has been reported to affect QNAP device running QVR. If exploited, this vulnerability could allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of QVR: QVR 5.1.5 build 20210803 and later

Certain NETGEAR devices are affected by command execution. This affects M4200-10MG-POE+ 12.0.2.11 and earlier, M4300-28G 12.0.2.11 and earlier, M4300-52G 12.0.2.11 and earlier, M4300-28G-POE+ 12.0.2.11 and earlier, M4300-52G-POE+ 12.0.2.11 and earlier, M4300-8X8F 12.0.2.11 and earlier, M4300-12X12F 12.0.2.11 and earlier, M4300-24X24F 12.0.2.11 and earlier, M4300-24X 12.0.2.11 and earlier, and M4300-48X 12.0.2.11 and earlier.

NextcloudPi is a ready to use image for Virtual Machines, Raspberry Pi, Odroid HC1, Rock64 and other boards. A command injection vulnerability in NextCloudPi allows command execution as the root user via the NextCloudPi web-panel. Due to a security misconfiguration this can be used by anyone with access to NextCloudPi web-panel, no authentication is required. It is recommended that the NextCloudPi is upgraded to 1.53.1.