An issue was discovered in Kaseya Unitrends Backup Appliance before 10.5.5. A world writable file allowed local users to execute arbitrary code as the user apache, leading to privilege escalation.
The I2O Utility Filter driver (i2omgmt.sys) 5.1.2600.2180 for Microsoft Windows XP sets Everyone/Write permissions for the "\\.\I2OExc" device interface, which allows local users to gain privileges. NOTE: this issue can be leveraged to overwrite arbitrary memory and execute code via an IOCTL call with a crafted DeviceObject pointer.
For VMware Horizon Client for Windows (5.x and prior before 5.3.0), VMware Remote Console for Windows (10.x before 11.0.0), VMware Workstation for Windows (15.x before 15.5.2) the folder containing configuration files for the VMware USB arbitration service was found to be writable by all users. A local user on the system where the software is installed may exploit this issue to run commands as any user.
A vulnerability has been identified in Xpedition Designer VX.2.10 (All versions < VX.2.10 Update 13), Xpedition Designer VX.2.11 (All versions < VX.2.11 Update 11), Xpedition Designer VX.2.12 (All versions < VX.2.12 Update 5), Xpedition Designer VX.2.13 (All versions < VX.2.13 Update 1). The affected application assigns improper access rights to the service executable. This could allow an authenticated local attacker to inject arbitrary code and escalate privileges.
Nokia SR OS routers allow read-write access to the entire file system via SFTP or SCP for users configured with "access console." Consequently, a low privilege authenticated user with "access console" can read or replace the router configuration file as well as other files stored in the Compact Flash or SD card without using CLI commands. This type of attack can lead to a compromise or denial of service of the router after the system is rebooted.
IBM Lotus Notes before 6.5.6, and 7.x before 7.0.3; and Domino before 6.5.5 FP3, and 7.x before 7.0.2 FP1; uses weak permissions (Everyone:Full Control) for memory mapped files (shared memory) in IPC, which allows local users to obtain sensitive information, or inject Lotus Script or other character sequences into a session.
On Unix systems (Linux, MacOS), Arc uses a temporary file with unsafe privileges. By tampering with such file, a malicious local user in the system may be able to trigger arbitrary code execution with root privileges.
Honeywell ProWatch, 4.5, including all Service Pack versions, contain a Vulnerability in Application Server's executable folder(s). A(n) attacker could potentially exploit this vulnerability, leading to a standard user to have arbitrary system code execution. Honeywell recommends updating to the most recent version of this product, service or offering (Pro-watch 6.0.2, 6.0, 5.5.2,5.0.5).
The Canon TR150 print driver through 3.71.2.10 is vulnerable to a privilege escalation issue. During the add printer process, a local attacker can overwrite CNMurGE.dll and, if timed properly, the overwritten DLL will be loaded into a SYSTEM process resulting in escalation of privileges. This occurs because the driver drops a world-writable DLL into a CanonBJ %PROGRAMDATA% location that gets loaded by printisolationhost (a system process).
The Lexmark Universal Print Driver version 2.15.1.0 and below, G2 driver 2.7.1.0 and below, G3 driver 3.2.0.0 and below, and G4 driver 4.2.1.0 and below are affected by a privilege escalation vulnerability. A standard low priviliged user can use the driver to execute a DLL of their choosing during the add printer process, resulting in escalation of privileges to SYSTEM.
Dell EMC PowerScale OneFS versions 8.2.x - 9.2.x contain an incorrect permission assignment for critical resource vulnerability. This could allow a user with ISI_PRIV_LOGIN_SSH or ISI_PRIV_LOGIN_CONSOLE to access privileged information about the cluster.
A user-writable application bundle unpacked during the install for all versions of the Zoom Plugin for Microsoft Outlook for Mac before 5.0.25611.0521 allows for privilege escalation to root.
A vulnerability has been identified in SINEC NMS (All versions < V2.0). The affected application assigns improper access rights to specific folders containing executable files and libraries. This could allow an authenticated local attacker to inject arbitrary code and escalate privileges.
An issue was discovered in Mullvad VPN Windows app before 2023.6-beta1. Insufficient permissions on a directory allow any local unprivileged user to escalate privileges to SYSTEM.
Insecure inherited permissions in the installer for the Intel(R) NUC M15 Laptop Kit audio driver pack before version 1.3 may allow an authenticated user to potentially enable escalation of privilege via local access.
WinWaste.NET version 1.0.6183.16475 has incorrect permissions, allowing a local unprivileged user to replace the executable with a malicious file that will be executed with "LocalSystem" privileges.
Insecure inherited permissions in the installer for the Intel(R) NUC M15 Laptop Kit Serial IO driver pack before version 30.100.2104.1 may allow an authenticated user to potentially enable escalation of privilege via local access.
Insecure inherited permissions in the installer for the Intel(R) NUC M15 Laptop Kit Keyboard LED Service driver pack before version 1.0.0.4 may allow an authenticated user to potentially enable escalation of privilege via local access.
PyInstaller bundles a Python application and all its dependencies into a single package. A PyInstaller built application, elevated as a privileged process, may be tricked by an unprivileged attacker into deleting files the unprivileged user does not otherwise have access to. A user is affected if **all** the following are satisfied: 1. The user runs an application containing either `matplotlib` or `win32com`. 2. The application is ran as administrator (or at least a user with higher privileges than the attacker). 3. The user's temporary directory is not locked to that specific user (most likely due to `TMP`/`TEMP` environment variables pointing to an unprotected, arbitrary, non default location). Either: A. The attacker is able to very carefully time the replacement of a temporary file with a symlink. This switch must occur exactly between `shutil.rmtree()`'s builtin symlink check and the deletion itself B: The application was built with Python 3.7.x or earlier which has no protection against Directory Junctions links. The vulnerability has been addressed in PR #7827 which corresponds to `pyinstaller >= 5.13.1`. Users are advised to upgrade. There are no known workarounds for this vulnerability.
Incorrect privileges in the MU55 FlexiSpooler service in YSoft SafeQ 6 6.0.55 allows local user privilege escalation by overwriting the executable file via an alternative data stream.
IBM Security Guardium 11.3, 11.4, 11.5, and 12.0 could allow a local user to gain elevated privileges on the system due to improper permissions control. IBM X-Force ID: 271527.
In SmartDraw 2020 27.0.0.0, the installer gives inherited write permissions to the Authenticated Users group on the SmartDraw 2020 installation folder. Additionally, when the product is installed, two scheduled tasks are created on the machine, SDMsgUpdate (Local) and SDMsgUpdate (TE). The scheduled tasks run in the context of the user who installed the product. Both scheduled tasks attempt to run the same binary, C:\SmartDraw 2020\Messages\SDNotify.exe. The folder Messages doesn't exist by default and (by extension) neither does SDNotify.exe. Due to the weak folder permissions, these can be created by any user. A malicious actor can therefore create a malicious SDNotify.exe binary, and have it automatically run, whenever the user who installed the product logs on to the machine. The malicious SDNotify.exe could, for example, create a new local administrator account on the machine.
Mesa Labs AmegaView Versions 3.0 and prior has insecure file permissions that could be exploited to escalate privileges on the device.
I2P before 0.9.46 allows local users to gain privileges via a Trojan horse I2PSvc.exe file because of weak permissions on a certain %PROGRAMFILES% subdirectory.
On F5 BIG-IP APM 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5.1, 14.1.x versions prior to 14.1.4.6, 13.1.x versions prior to 13.1.5, and all versions of 12.1.x and 11.6.x, as well as F5 BIG-IP APM Clients 7.x versions prior to 7.2.1.5, the BIG-IP Edge Client Component Installer Service does not use best practice while saving temporary files. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated
ZOLL Defibrillator Dashboard, v prior to 2.2,The affected products contain insecure filesystem permissions that could allow a lower privilege user to escalate privileges to an administrative level user.
SolarWinds Advanced Monitoring Agent before 10.8.9 allows local users to gain privileges via a Trojan horse .exe file, because everyone can write to a certain .exe file.
WinGate v9.4.1.5998 has insecure permissions for the installation directory, which allows local users to gain privileges by replacing an executable file with a Trojan horse.
In GOG Galaxy 1.2.67, there is a service that is vulnerable to weak file/service permissions: GalaxyClientService.exe. An attacker can put malicious code in a Trojan horse GalaxyClientService.exe. After that, the attacker can re-start this service as an unprivileged user to escalate his/her privileges and run commands on the machine with SYSTEM rights.
An Authorization Bypass vulnerability on Micro Focus Operation Bridge Reporter, affecting version 10.40 and earlier. The vulnerability could allow local attackers on the OBR host to execute code with escalated privileges.
Arbitrary Process Execution vulnerability in McAfee Total Protection (MTP) prior to 16.0.30 allows a local user to gain elevated privileges and execute arbitrary code bypassing MTP self-defense.
An elevation of privilege vulnerability exists in Windows Defender that leads arbitrary file deletion on the system.To exploit the vulnerability, an attacker would first have to log on to the system, aka 'Microsoft Windows Defender Elevation of Privilege Vulnerability'. This CVE ID is unique from CVE-2020-1163.
ALTOOLS update service 18.1 and earlier versions contains a local privilege escalation vulnerability due to insecure permission. An attacker can overwrite an executable that is launched as a service to exploit this vulnerability and execute arbitrary code with system privileges.
The Windows Installation component of TIBCO Software Inc.'s TIBCO Enterprise Runtime for R - Server Edition, TIBCO Enterprise Runtime for R - Server Edition, TIBCO Enterprise Runtime for R - Server Edition, TIBCO Spotfire Analytics Platform for AWS Marketplace, TIBCO Spotfire Server, TIBCO Spotfire Server, TIBCO Spotfire Server, TIBCO Spotfire Statistics Services, TIBCO Spotfire Statistics Services, and TIBCO Spotfire Statistics Services contains a vulnerability that theoretically allows a low privileged attacker with local access on some versions of the Windows operating system to insert malicious software. The affected component can be abused to execute the malicious software inserted by the attacker with the elevated privileges of the component. This vulnerability results from a lack of access restrictions on certain files and/or folders in the installation. Affected releases are TIBCO Software Inc.'s TIBCO Enterprise Runtime for R - Server Edition: versions 1.2.4 and below, TIBCO Enterprise Runtime for R - Server Edition: versions 1.3.0 and 1.3.1, TIBCO Enterprise Runtime for R - Server Edition: versions 1.4.0, 1.5.0, and 1.6.0, TIBCO Spotfire Analytics Platform for AWS Marketplace: versions 11.3.0 and below, TIBCO Spotfire Server: versions 10.3.12 and below, TIBCO Spotfire Server: versions 10.4.0, 10.5.0, 10.6.0, 10.6.1, 10.7.0, 10.8.0, 10.8.1, 10.9.0, 10.10.0, 10.10.1, 10.10.2, 10.10.3, and 10.10.4, TIBCO Spotfire Server: versions 11.0.0, 11.1.0, 11.2.0, and 11.3.0, TIBCO Spotfire Statistics Services: versions 10.3.0 and below, TIBCO Spotfire Statistics Services: versions 10.10.0, 10.10.1, and 10.10.2, and TIBCO Spotfire Statistics Services: versions 11.1.0, 11.2.0, and 11.3.0.
Improper permissions in the Intel(R) Driver & Support Assistant before version 20.7.26.7 may allow an authenticated user to potentially enable escalation of privilege via local access.
A vulnerability has been identified in SICAM PAS/PQS (All versions >= V8.00 < V8.20). The affected application is installed with specific files and folders with insecure permissions. This could allow an authenticated local attacker to inject arbitrary code and escalate privileges to `NT AUTHORITY/SYSTEM`.
A CWE-732: Incorrect Permission Assignment for Critical Resource vulnerability exists that could allow remote code execution when an unprivileged user modifies a file. Affected Product: C-Bus Toolkit (V1.15.9 and prior)
RabbitMQ installers on Windows prior to version 3.8.16 do not harden plugin directory permissions, potentially allowing attackers with sufficient local filesystem permissions to add arbitrary plugins.
This vulnerability allows local attackers to escalate privileges on affected installations of TP-Link Archer A7 Firmware Ver: 190726 AC1750 routers. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the file system. The issue lies in the lack of proper permissions set on the file system. An attacker can leverage this vulnerability to escalate privileges. Was ZDI-CAN-9651.
QQBrowser before 10.5.3870.400 installs a Windows service TsService.exe. This file is writable by anyone belonging to the NT AUTHORITY\Authenticated Users group, which includes all local and remote users. This can be abused by local attackers to escalate privileges to NT AUTHORITY\SYSTEM by writing a malicious executable to the location of TsService.
In Rockwell Automation RSLinx Classic versions 4.11.00 and prior, an authenticated local attacker could modify a registry key, which could lead to the execution of malicious code using system privileges when opening RSLinx Classic.
Dell PowerScale OneFS 9.1.0.x contains an improper privilege management vulnerability. It may allow an authenticated user with ISI_PRIV_LOGIN_SSH and/or ISI_PRIV_LOGIN_CONSOLE to elevate privilege.
A flaw was found in Linux, in targetcli-fb versions 2.1.50 and 2.1.51 where the socket used by targetclid was world-writable. If a system enables the targetclid socket, a local attacker can use this flaw to modify the iSCSI configuration and escalate their privileges to root.
Insecure Service File Permissions in the bd service in Real Time Logic BarracudaDrive v6.5 allow local attackers to escalate privileges to admin by replacing the %SYSTEMDRIVE%\bd\bd.exe file. When the computer next starts, the new bd.exe will be run as LocalSystem.
A vulnerability has been identified in Spectrum Power 7 (All versions < V23Q4). The affected product's sudo configuration permits the local administrative account to execute several entries as root user. This could allow an authenticated local attacker to inject arbitrary code and gain root access.
An insecure modification flaw in the /etc/passwd file was found in the openjdk-1.8 and openjdk-11 containers. This flaw allows an attacker with access to the container to modify the /etc/passwd and escalate their privileges. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability.
ovirt-engine 3.2 running on Linux kernel 3.1 and newer creates certain files world-writeable due to an upstream kernel change which impacted how python's os.chmod() works when passed a mode of '-1'.
All known versions of the Netgear Genie Installer for macOS contain a local privilege escalation vulnerability. The installer of the macOS version of Netgear Genie handles certain files in an insecure way. A malicious actor who has local access to the endpoint on which the software is going to be installed may overwrite certain files to obtain privilege escalation to root.
In sendBugreportNotification of BugreportProgressService.java, there is a possible permission bypass due to an unsafe PendingIntent. This could lead to local escalation of privilege with User execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11Android ID: A-178803845
In sendBroadcastToInstaller of FirstScreenBroadcast.java, there is a possible activity launch due to an unsafe PendingIntent. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11 Android-9 Android-10Android ID: A-179289753