In the web management interface in Foscam C1 Indoor HD Camera running application firmware 2.52.2.37, a specially crafted HTTP request can allow for a user to inject arbitrary data in the "msmtprc" configuration file resulting in command execution. An attacker can simply send an HTTP request to the device to trigger this vulnerability.

An exploitable vulnerability exists in the /api/CONFIG/backup functionality of Circle with Disney. Specially crafted network packets can cause an OS command injection. An attacker can send an HTTP request to trigger this vulnerability.

The affected product is vulnerable to a parameter injection via passphrase, which enables the attacker to supply uncontrolled input.

In the web management interface in Foscam C1 Indoor HD cameras with application firmware 2.52.2.37, a specially crafted HTTP request can allow for a user to inject arbitrary shell characters during manual network configuration resulting in command injection. An attacker can simply send an HTTP request to the device to trigger this vulnerability.

An exploitable command injection vulnerability exists in the web management interface used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.37. A specially crafted HTTP request can allow for a user to inject arbitrary data in the "msmtprc" configuration file resulting in command execution. An attacker can simply send an HTTP request to the device to trigger this vulnerability.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWeb version 6.4.1 and 6.4.0, version 6.3.15 and below, version 6.2.6 and below allows attacker to execute unauthorized code or commands via crafted HTTP requests.

The web framework in Cisco Identity Services Engine (ISE) 1.0 and 1.1.0 before 1.1.0.665-5, 1.1.1 before 1.1.1.268-7, 1.1.2 before 1.1.2.145-10, 1.1.3 before 1.1.3.124-7, 1.1.4 before 1.1.4.218-7, and 1.2 before 1.2.0.899-2 allows remote authenticated users to execute arbitrary commands via a crafted session on TCP port 443, aka Bug ID CSCuh81511.

A vulnerability was found in Sapido BR270n, BRC76n, GR297 and RB1732 and classified as critical. Affected by this issue is some unknown functionality of the file ip/syscmd.htm. The manipulation leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-214592.

WG-C10 v3.0.79 and earlier allows an attacker to execute arbitrary OS commands via unspecified vectors.

A shell command injection in the HW Events SNMP community in XoruX LPAR2RRD and STOR2RRD before 7.30 allows authenticated remote attackers to execute arbitrary shell commands as the user running the service.

The ZyXEL P660HN-T1A v2 TCLinux Fw #7.3.37.6 router distributed by TrueOnline has a command injection vulnerability in the Remote System Log forwarding function, which is only accessible by an authenticated user. The vulnerability is in the logSet.asp page and can be exploited through the ServerIP parameter. Authentication can be achieved by exploiting CVE-2017-18371.

MitraStar GPT-2541GNAC-N1 (HGU) 100VNZ0b33 devices allow remote authenticated users to obtain root access by executing command "deviceinfo show file &&/bin/bash" because of incorrect sanitization of parameter "path".

In app/Controller/ServersController.php in MISP 2.4.87, a server setting permitted the override of a path variable on certain Red Hed Enterprise Linux and CentOS systems (where rh_shell_fix was enabled), and consequently allowed site admins to inject arbitrary OS commands. The impact is limited by the setting being only accessible to the site administrator.

An exploitable command injection vulnerability exists in encrypted diagnostic script functionality of the Moxa AWK-3131A firmware version 1.13. A specially crafted diagnostic script file can cause arbitrary busybox commands to be executed, resulting in remote control over the device. An attacker can send diagnostic while authenticated as a low privilege user to trigger this vulnerability.

Multiple improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerabilities [CWE-78] in Fortinet FortiIsolator version 2.4.0 through 2.4.5 allows an authenticated attacker with at least read-only admin permission and CLI access to execute unauthorized code via specifically crafted CLI commands.

TP-Link TL-WVR and TL-WAR devices allow remote authenticated users to execute arbitrary commands via shell metacharacters in the interface field of an admin/wportal command to cgi-bin/luci, related to the get_device_byif function in /usr/lib/lua/luci/controller/admin/wportal.lua in uhttpd.

Access analysis CGI An-Analyzer released in 2019 June 24 and earlier allows remote authenticated attackers to execute arbitrary OS commands via the Management Page.

The Device42 Remote Collector before 17.05.01 does not sanitize user input in its SNMP Connectivity utility. This allows an authenticated attacker (with access to the console application) to execute arbitrary OS commands and escalate privileges.

TP-Link wifi router TL-WR802N V4(JP), with firmware version prior to 211202, is vulnerable to OS command injection.

The Billion 5200W-T TCLinux Fw $7.3.8.0 v008 130603 router distributed by TrueOnline has a command injection vulnerability in the Time Setting function, which is only accessible by an authenticated user. The vulnerability is in the tools_time.asp page and can be exploited through the uiViewSNTPServer parameter. Authentication can be achieved by exploiting CVE-2017-18373.

TP-Link TL-WVR and TL-WAR devices allow remote authenticated users to execute arbitrary commands via shell metacharacters in the interface field of an admin/dhcps command to cgi-bin/luci, related to the zone_get_iface_bydev function in /usr/lib/lua/luci/controller/admin/dhcps.lua in uhttpd.

In Ubiquiti Networks EdgeSwitch X v1.1.0 and prior, a privileged user can execute arbitrary shell commands over the SSH CLI interface. This allows to execute shell commands under the root user.

A improper neutralization of special elements used in a command ('command injection') in Fortinet FortiExtender version 7.0.1 and below, 4.2.3 and below, 4.1.7 and below allows an authenticated attacker to execute privileged shell commands via CLI commands including special characters

lib/rrd.php in Cacti 1.1.27 allows remote authenticated administrators to execute arbitrary OS commands via the path_rrdtool parameter in an action=save request to settings.php.

D-Link DIR-846W A1 FW100A43 was discovered to contain a remote command execution (RCE) vulnerability via the wl(0).(0)_ssid parameter. This vulnerability is exploited via a crafted POST request.

An exploitable command injection vulnerability exists in the hostname functionality of the Moxa AWK-3131A firmware version 1.13. A specially crafted entry to network configuration information can cause execution of arbitrary system commands, resulting in full control of the device. An attacker can send various authenticated requests to trigger this vulnerability.

A command injection vulnerability is present in the web management interface of ArubaOS that permits an authenticated user to execute arbitrary commands on the underlying operating system. A malicious administrator could use this ability to install backdoors or change system configuration in a way that would not be logged. This vulnerability only affects ArubaOS 8.x.

The web framework in Cisco WAAS Software before 4.x and 5.x before 5.0.3e, 5.1.x before 5.1.1c, and 5.2.x before 5.2.1; Cisco ACNS Software 4.x and 5.x before 5.5.29.2; Cisco ECDS Software 2.x before 2.5.6; Cisco CDS-IS Software 2.x before 2.6.3.b50 and 3.1.x before 3.1.2b54; Cisco VDS-IS Software 3.2.x before 3.2.1.b9; Cisco VDS-SB Software 1.x before 1.1.0-b96; Cisco VDS-OE Software 1.x before 1.0.1; and Cisco VDS-OS Software 1.x in central-management mode allows remote authenticated users to execute arbitrary commands by appending crafted strings to values in GUI fields, aka Bug IDs CSCug40609, CSCug48855, CSCug48921, CSCug48872, CSCuh21103, CSCuh21020, and CSCug56790.

D-Link DIR-846W A1 FW100A43 was discovered to contain a remote command execution (RCE) vulnerability via the lan(0)_dhcps_staticlist parameter. This vulnerability is exploited via a crafted POST request.

An exploitable command injection vulnerability exists in the iw_webs functionality of the Moxa AWK-3131A firmware version 1.13. A specially crafted iw_serverip parameter can cause user input to be reflected in a subsequent iw_system call, resulting in remote control over the device. An attacker can send commands while authenticated as a low privilege user to trigger this vulnerability.

ginkgosnmp.inc in HP System Management Homepage (SMH) allows remote authenticated users to execute arbitrary commands via shell metacharacters in the PATH_INFO to smhutil/snmpchp.php.en.

An exploitable command injection vulnerability exists in the cloud connectivity feature of WAGO PFC200. An attacker can inject operating system commands into any of the parameter values contained in the firmware update command. This affects WAGO PFC200 Firmware version 03.02.02(14), version 03.01.07(13), and version 03.00.39(12)

ZeroShell 3.9.5 has a command injection vulnerability in /cgi-bin/kerbynet IP parameter, which may allow an authenticated attacker to execute system commands.

D-Link DIR-846W A1 FW100A43 was discovered to contain a remote command execution (RCE) vulnerability via keys smartqos_express_devices and smartqos_normal_devices in SetSmartQoSSettings.

SQL injection vulnerability in the Help Desk application in Wave EMBASSY Remote Administration Server (ERAS) allows remote authenticated users to execute arbitrary SQL commands via the ct100$4MainController$TextBoxSearchValue parameter (aka the search field), leading to execution of operating-system commands.

The Nexus Yum Repository Plugin in v2 is vulnerable to Remote Code Execution when instances using CommandLineExecutor.java are supplied vulnerable data, such as the Yum Configuration Capability.

In OTRS 6.0.x up to and including 6.0.1, OTRS 5.0.x up to and including 5.0.24, and OTRS 4.0.x up to and including 4.0.26, an attacker who is logged into OTRS as an agent can manipulate form parameters (related to PGP) and execute arbitrary shell commands with the permissions of the OTRS or web server user.

NetApp OnCommand System Manager 2.1 and earlier allows remote attackers to inject arbitrary commands in the Halt/Reboot interface.

Rittal CMC PU III Web management Version affected: V3.11.00_2. Version fixed: V3.17.10 is affected by a remote code execution vulnerablity. It is possible to introduce shell code to create a reverse shell in the PU-Hostname field of the TCP/IP Configuration dialog. Web application fails to sanitize user input on Network TCP/IP configuration page. This allows the attacker to inject commands as root on the device which will be executed once the data is received.

A Command Injection vulnerability exists in Vivotek PT7135 IP Cameras 0300a and 0400a via the system.ntp parameter to the farseer.out binary file, which cold let a malicious user execute arbitrary code.

DrayTek Vigor3900 v1.5.1.6 was discovered to contain an authenticated command injection vulnerability via the name parameter in the run_command function.

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in setUrlFilterRules. Authenticated Attackers can send malicious packet to execute arbitrary commands.

A vulnerability in the Redfish protocol of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject and execute arbitrary commands with root privileges on an affected device. The vulnerability is due to insufficient validation of user-supplied input by the affected software. An attacker could exploit this vulnerability by sending crafted authenticated commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary commands on an affected device with root privileges.

Artica Pandora FMS 7.44 allows remote command execution via the events feature.

ROOT version 6.9.03 and below is vulnerable to an authenticated shell metacharacter injection in the rootd daemon resulting in remote code execution

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in setL2tpServerCfg. Authenticated Attackers can send malicious packet to execute arbitrary commands.

TP-Link TL-WVR, TL-WAR, TL-ER, and TL-R devices allow remote authenticated users to execute arbitrary commands via shell metacharacters in the iface field of an admin/diagnostic command to cgi-bin/luci, related to the zone_get_effect_devices function in /usr/lib/lua/luci/controller/admin/diagnostic.lua in uhttpd.

rConfig 3.9.4 and earlier allows authenticated code execution (of system commands) by sending a forged GET request to lib/ajaxHandlers/ajaxAddTemplate.php or lib/ajaxHandlers/ajaxEditTemplate.php.

Vulnerability in the product Docsis 3.0 UBC1319BA00 Router supported affected version 1319010201r009. The vulnerability allows an attacker with privileges and network access through the ping.cmd component to execute commands on the device.