Multiple vulnerabilities in the implementation of the Common Industrial Protocol (CIP) feature in Cisco IOS 12.4 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of crafted CIP packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted CIP packets to be processed by an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvc43709.

A vulnerability in the Akamai Connect feature of Cisco Wide Area Application Services (WAAS) Appliances could allow an unauthenticated, remote attacker to cause a denial-of-service (DoS) condition on an affected device. The vulnerability is due to certain file-handling inefficiencies of the affected system. An attacker could exploit this vulnerability by directing client systems to access a corrupted file that the client systems cannot decompress correctly. A successful exploit could allow the attacker to cause the affected device to crash or hang unexpectedly and result in a DoS condition that may require manual intervention to regain normal operating conditions. Cisco Bug IDs: CSCve82472.

Cisco IOS XE 03.02.00.XO.15.0(2)XO on Catalyst 4500E series switches, when a Supervisor Engine 7L-E card is installed, allows remote attackers to cause a denial of service (card reload) via malformed packets that trigger uncorrected ECC error messages, aka Bug ID CSCty88456.

Multiple vulnerabilities in the implementation of the Common Industrial Protocol (CIP) feature in Cisco IOS 12.4 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of crafted CIP packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted CIP packets to be processed by an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCuz95334.

A vulnerability in the Autonomic Networking Infrastructure (ANI) feature of Cisco IOS Software (15.4 through 15.6) and Cisco IOS XE Software (3.7 through 3.18, and 16) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to incomplete input validation on certain crafted packets. An attacker could exploit this vulnerability by sending a crafted IPv6 packet to a device that is running a Cisco IOS Software or Cisco IOS XE Software release that supports the ANI feature. A device must meet two conditions to be affected by this vulnerability: (1) the device must be running a version of Cisco IOS Software or Cisco IOS XE Software that supports ANI (regardless of whether ANI is configured); and (2) the device must have a reachable IPv6 interface. An exploit could allow the attacker to cause the affected device to reload. Cisco Bug IDs: CSCvc42729.

A vulnerability in the web management interface of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a missing internal handler for the specific request. An attacker could exploit this vulnerability by accessing a specific hidden URL on the GUI web management interface. A successful exploit could allow the attacker to cause a reload of the device, resulting in a DoS condition. This vulnerability affects only the Cisco Wireless LAN Controller 8.3.102.0 release. Cisco Bug IDs: CSCvb48198.

The Intrusion Prevention System (IPS) feature in Cisco IOS 12.3 through 12.4 and 15.0 through 15.2, in certain configurations of enabled categories and missing signatures, allows remote attackers to cause a denial of service (device reload) via DNS packets, aka Bug ID CSCtw55976.

The DHCP server on Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 7.0 before 7.2(5.8), 7.1 before 7.2(5.8), 7.2 before 7.2(5.8), 8.0 before 8.0(5.28), 8.1 before 8.1(2.56), 8.2 before 8.2(5.27), 8.3 before 8.3(2.31), 8.4 before 8.4(3.10), 8.5 before 8.5(1.9), and 8.6 before 8.6(1.5) does not properly allocate memory for DHCP packets, which allows remote attackers to cause a denial of service (device reload) via a series of crafted IPv4 packets, aka Bug ID CSCtw84068.

A vulnerability in an API of the Call Bridge feature of Cisco Meeting Server could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to improper handling of large series of message requests. An attacker could exploit this vulnerability by sending a series of messages to the vulnerable API. A successful exploit could allow the attacker to cause the affected device to reload, dropping all ongoing calls and resulting in a DoS condition.

The DCERPC inspection engine on Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.3 before 8.3(2.25), 8.4 before 8.4(2.5), and 8.5 before 8.5(1.13) and the Firewall Services Module (FWSM) 4.1 before 4.1(7) in Cisco Catalyst 6500 series switches and 7600 series routers allows remote attackers to cause a denial of service (device reload) via a crafted DCERPC packet, aka Bug IDs CSCtr21376 and CSCtr27524.

A vulnerability in the Layer 2 Tunneling Protocol (L2TP) parsing function of Cisco IOS (12.0 through 12.4 and 15.0 through 15.6) and Cisco IOS XE (3.1 through 3.18) could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient validation of L2TP packets. An attacker could exploit this vulnerability by sending a crafted L2TP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or Cisco IOS XE Software if the L2TP feature is enabled for the device and the device is configured as an L2TP Version 2 (L2TPv2) or L2TP Version 3 (L2TPv3) endpoint. By default, the L2TP feature is not enabled. Cisco Bug IDs: CSCuy82078.

A vulnerability in the DHCP client implementation of Cisco IOS (12.2, 12.4, and 15.0 through 15.6) and Cisco IOS XE (3.3 through 3.7) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability occurs during the parsing of a crafted DHCP packet. An attacker could exploit this vulnerability by sending crafted DHCP packets to an affected device that is configured as a DHCP client. A successful exploit could allow the attacker to cause a reload of an affected device, resulting in a DoS condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or IOS XE Software and using a specific DHCP client configuration. Cisco Bug IDs: CSCuu43892.

Race condition in the Zone-Based Firewall in Cisco IOS 15.1 and 15.2, when IPS policies are configured, allows remote attackers to cause a denial of service (device crash) by sending IPv6 packets, aka Bug ID CSCtk53534.

Multiple unspecified vulnerabilities in the SSH server in Cisco IOS 12.4 allow remote attackers to cause a denial of service (device restart) via unknown vectors, aka Bug ID (1) CSCsk42419, (2) CSCsk60020, and (3) CSCsh51293.

Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit the vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition.

The IKEv1 implementation in Cisco IOS 12.2 through 12.4 and 15.0 through 15.2 and IOS XE 2.1.x through 2.6.x and 3.1.xS through 3.4.xS before 3.4.2S, 3.5.xS before 3.5.1S, and 3.2.xSG before 3.2.2SG allows remote attackers to cause a denial of service (device reload) by sending IKE UDP packets over (1) IPv4 or (2) IPv6, aka Bug ID CSCts38429.

Cisco IOS 12.0 through 12.2, when supporting SSH, allows remote attackers to cause a denial of service (CPU consumption) via a large packet that was designed to exploit the SSH CRC32 attack detection overflow (CVE-2001-0144).

A memory leak vulnerability exists in Cisco IOS before 15.2(1)T due to a memory leak in the HTTP PROXY Server process (aka CSCtu52820), when configured with Cisco ISR Web Security with Cisco ScanSafe and User Authenticaiton NTLM configured.

Cisco Unified Presence before 8.5(4) does not properly detect recursion during entity expansion, which allows remote attackers to cause a denial of service (memory and CPU consumption, and process crash) via a crafted XML document containing a large number of nested entity references, aka Bug IDs CSCtq89842 and CSCtq88547, a similar issue to CVE-2003-1564.

The cat6000-dot1x component in Cisco IOS 12.2 before 12.2(33)SXI7 does not properly handle (1) a loop between a dot1x enabled port and an open-authentication dot1x enabled port and (2) a loop between a dot1x enabled port and a non-dot1x port, which allows remote attackers to cause a denial of service (traffic storm) via unspecified vectors that trigger many Spanning Tree Protocol (STP) Bridge Protocol Data Unit (BPDU) frames, aka Bug ID CSCtq36327.

The SIP process in Cisco Unified Communications Manager (aka CUCM, formerly CallManager) 7.x before 7.1(5b)su4 and 8.x before 8.0(1) does not properly handle SDP data within a SIP call in certain situations related to use of the g729ar8 codec for a Media Termination Point (MTP), which allows remote attackers to cause a denial of service (service outage) via a crafted call, aka Bug ID CSCtc61990.

Unspecified vulnerability in the Supervisor Engine 32 (Sup32), Supervisor Engine 720 (Sup720), and Route Switch Processor 720 (RSP720) for multiple Cisco products, when using Multi Protocol Label Switching (MPLS) VPN and OSPF sham-link, allows remote attackers to cause a denial of service (blocked queue, device restart, or memory leak) via unknown vectors.

Unspecified vulnerability in Cisco PIX 500 Series Security Appliance and 5500 Series Adaptive Security Appliance (ASA) before 7.2(3)6 and 8.0(3), when the Time-to-Live (TTL) decrement feature is enabled, allows remote attackers to cause a denial of service (device reload) via a crafted IP packet.

Unspecified vulnerability in the Extensible Authentication Protocol (EAP) implementation in Cisco IOS 12.3 and 12.4 on Cisco Access Points and 1310 Wireless Bridges (Wireless EAP devices), IOS 12.1 and 12.2 on Cisco switches (Wired EAP devices), and CatOS 6.x through 8.x on Cisco switches allows remote attackers to cause a denial of service (device reload) via a crafted EAP Response Identity packet.

Cisco PIX and ASA appliances with 7.0 through 8.0 software, and Cisco Firewall Services Module (FWSM) 3.1(5) and earlier, allow remote attackers to cause a denial of service (device reload) via a crafted MGCP packet, aka CSCsi90468 (appliance) and CSCsi00694 (FWSM).

Cisco PIX and ASA appliances with 7.1 and 7.2 software, when configured for TLS sessions to the device, allow remote attackers to cause a denial of service (device reload) via a crafted TLS packet, aka CSCsg43276 and CSCsh97120.

Off-by-one error in Cisco IOS allows remote attackers to execute arbitrary code via unspecified vectors that trigger a heap-based buffer overflow. NOTE: as of 20071016, the only disclosure is a vague pre-advisory with no actionable information. However, since it is from a well-known researcher, it is being assigned a CVE identifier for tracking purposes.

Cisco IP Phone 7940 and 7960 with P0S3-08-6-00 firmware, and other SIP firmware before 8.7(0), allows remote attackers to cause a denial of service (device reboot) via (1) a certain sequence of 10 invalid SIP INVITE and OPTIONS messages; or (2) a certain invalid SIP INVITE message that contains a remote tag, followed by a certain set of two related SIP OPTIONS messages.

A vulnerability in the Internet Key Exchange Version 2 (IKEv2) feature of Cisco IOS Software, IOS XE Software, Secure Firewall Adaptive Security Appliance (ASA) Software, and Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a memory leak, resulting in a denial of service (DoS) condition. This vulnerability is due to a lack of proper processing of IKEv2 packets. An attacker could exploit this vulnerability by sending crafted IKEv2 packets to an affected device. In the case of Cisco IOS and IOS XE Software, a successful exploit could allow the attacker to cause the device to reload unexpectedly. In the case of Cisco ASA and FTD Software, a successful exploit could allow the attacker to partially exhaust system memory, causing system instability such as being unable to establish new IKEv2 VPN sessions. A manual reboot of the device is required to recover from this condition.

Cisco IOS 12.0 through 12.4 allows remote attackers to cause a denial of service via (1) a malformed MGCP packet, which causes a device hang, aka CSCsf08998; a malformed H.323 packet, which causes a device crash, as identified by (2) CSCsi60004 with Proxy Unregistration and (3) CSCsg70474; and a malformed Real-time Transport Protocol (RTP) packet, which causes a device crash, as identified by (4) CSCse68138, related to VOIP RTP Lib, and (5) CSCse05642, related to I/O memory corruption.

Cisco 4100 and 4400, Airespace 4000, and Catalyst 6500 and 3750 Wireless LAN Controller (WLC) software 4.1 before 4.1.180.0 allows remote attackers to cause a denial of service (ARP storm) via a broadcast ARP packet that "targets the IP address of a known client context", aka CSCsj50374.

A vulnerability in the Border Gateway Protocol (BGP) over an Ethernet Virtual Private Network (EVPN) for Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the device to reload, resulting in a denial of service (DoS) condition, or potentially corrupt the BGP routing table, which could result in network instability. The vulnerability exists due to changes in the implementation of the BGP MPLS-Based Ethernet VPN RFC (RFC 7432) draft between IOS XE software releases. When the BGP Inclusive Multicast Ethernet Tag Route or BGP EVPN MAC/IP Advertisement Route update packet is received, it could be possible that the IP address length field is miscalculated. An attacker could exploit this vulnerability by sending a crafted BGP packet to an affected device after the BGP session was established. An exploit could allow the attacker to cause the affected device to reload or corrupt the BGP routing table; either outcome would result in a DoS. The vulnerability may be triggered when the router receives a crafted BGP message from a peer on an existing BGP session. This vulnerability affects all releases of Cisco IOS XE Software prior to software release 16.3 that support BGP EVPN configurations. If the device is not configured for EVPN, it is not vulnerable. Cisco Bug IDs: CSCui67191, CSCvg52875.

Cisco 4100 and 4400, Airespace 4000, and Catalyst 6500 and 3750 Wireless LAN Controller (WLC) software before 3.2 20070727, 4.0 before 20070727, and 4.1 before 4.1.180.0 allows remote attackers to cause a denial of service (traffic amplification or ARP storm) via a crafted unicast ARP request that (1) has a destination MAC address unknown to the Layer-2 infrastructure, aka CSCsj69233; or (2) occurs during Layer-3 roaming across IP subnets, aka CSCsj70841.

A vulnerability in the Internet Key Exchange Version 2 (IKEv2) module of Cisco IOS 15.0 through 15.6 and Cisco IOS XE 3.5 through 16.5 could allow an unauthenticated, remote attacker to cause high CPU utilization, traceback messages, or a reload of an affected device that leads to a denial of service (DoS) condition. The vulnerability is due to how an affected device processes certain IKEv2 packets. An attacker could exploit this vulnerability by sending specific IKEv2 packets to an affected device to be processed. A successful exploit could allow the attacker to cause high CPU utilization, traceback messages, or a reload of the affected device that leads to a DoS condition. This vulnerability affects Cisco devices that have the Internet Security Association and Key Management Protocol (ISAKMP) enabled. Although only IKEv2 packets can be used to trigger this vulnerability, devices that are running Cisco IOS Software or Cisco IOS XE Software are vulnerable when ISAKMP is enabled. A device does not need to be configured with any IKEv2-specific features to be vulnerable. Many features use IKEv2, including different types of VPNs such as the following: LAN-to-LAN VPN; Remote-access VPN, excluding SSL VPN; Dynamic Multipoint VPN (DMVPN); and FlexVPN. Cisco Bug IDs: CSCvc41277.

A vulnerability in the processing of Control and Provisioning of Wireless Access Points (CAPWAP) Mobility messages in Cisco IOS XE Wireless Controller Software for the Catalyst 9000 Family could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to a logic error and improper management of resources related to the handling of CAPWAP Mobility messages. An attacker could exploit this vulnerability by sending crafted CAPWAP Mobility packets to an affected device. A successful exploit could allow the attacker to exhaust resources on the affected device. This would cause the device to reload, resulting in a DoS condition.

Cisco IOS 12.0 through 12.4 allows remote attackers to cause a denial of service (device crash) via (1) "abnormal" MGCP messages, aka CSCsd81407; and (2) a large facsimile packet, aka CSCej20505.

A vulnerability in the implementation of the PROFINET Discovery and Configuration Protocol (PN-DCP) for Cisco IOS 12.2 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to the improper parsing of ingress PN-DCP Identify Request packets destined to an affected device. An attacker could exploit this vulnerability by sending a crafted PN-DCP Identify Request packet to an affected device and then continuing to send normal PN-DCP Identify Request packets to the device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. This vulnerability affects Cisco devices that are configured to process PROFINET messages. Beginning with Cisco IOS Software Release 12.2(52)SE, PROFINET is enabled by default on all the base switch module and expansion-unit Ethernet ports. Cisco Bug IDs: CSCuz47179.

Cisco IOS XE does not properly manage memory for TFTP UDP flows, which allows remote attackers to cause a denial of service (memory consumption) via TFTP (1) client or (2) server traffic, aka Bug IDs CSCuh09324 and CSCty42686.

Race condition in Cisco Adaptive Security Appliance (ASA) and PIX 7.1 before 7.1(2)49 and 7.2 before 7.2(2)19, when using "clientless SSL VPNs," allows remote attackers to cause a denial of service (device reload) via "non-standard SSL sessions."

node-jose is a JavaScript implementation of the JSON Object Signing and Encryption (JOSE) for web browsers and node.js-based servers. Prior to version 2.2.0, when using the non-default "fallback" crypto back-end, ECC operations in `node-jose` can trigger a Denial-of-Service (DoS) condition, due to a possible infinite loop in an internal calculation. For some ECC operations, this condition is triggered randomly; for others, it can be triggered by malicious input. The issue has been patched in version 2.2.0. Since this issue is only present in the "fallback" crypto implementation, it can be avoided by ensuring that either WebCrypto or the Node `crypto` module is available in the JS environment where `node-jose` is being run.

The ATOMIC.TCP signature engine in the Intrusion Prevention System (IPS) feature for Cisco IOS 12.4XA, 12.3YA, 12.3T, and other trains allows remote attackers to cause a denial of service (IPS crash and traffic loss) via unspecified manipulations that are not properly handled by the regular expression feature, as demonstrated using the 3123.0 (Netbus Pro Traffic) signature.

A vulnerability in the remote access VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of HTTPS requests. An attacker could exploit this vulnerability by sending crafted HTTPS requests to an affected system. A successful exploit could allow the attacker to cause resource exhaustion, resulting in a DoS condition.

A vulnerability in the Vector Packet Processor (VPP) of Cisco Packet Data Network Gateway (PGW) could allow an unauthenticated, remote attacker to stop ICMP traffic from being processed over an IPsec connection. This vulnerability is due to the VPP improperly handling a malformed packet. An attacker could exploit this vulnerability by sending a malformed Encapsulating Security Payload (ESP) packet over an IPsec connection. A successful exploit could allow the attacker to stop ICMP traffic over an IPsec connection and cause a denial of service (DoS).

A vulnerability in an API endpoint of multiple Cisco Unified Communications Products could allow an unauthenticated, remote attacker to cause high CPU utilization, which could impact access to the web-based management interface and cause delays with call processing. This API is not used for device management and is unlikely to be used in normal operations of the device. This vulnerability is due to improper API authentication and incomplete validation of the API request. An attacker could exploit this vulnerability by sending a crafted HTTP request to a specific API on the device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition due to high CPU utilization, which could negatively impact user traffic and management access. When the attack stops, the device will recover without manual intervention.

A vulnerability in a logging API in Cisco Firepower Management Center (FMC) Software could allow an unauthenticated, remote attacker to cause the device to become unresponsive or trigger an unexpected reload. This vulnerability could also allow an attacker with valid user credentials, but not Administrator privileges, to view a system log file that they would not normally have access to. This vulnerability is due to a lack of rate-limiting of requests that are sent to a specific API that is related to an FMC log. An attacker could exploit this vulnerability by sending a high rate of HTTP requests to the API. A successful exploit could allow the attacker to cause a denial of service (DoS) condition due to the FMC CPU spiking to 100 percent utilization or to the device reloading. CPU utilization would return to normal if the attack traffic was stopped before an unexpected reload was triggered.

A vulnerability in the local interface of Cisco BroadWorks Network Server could allow an unauthenticated, remote attacker to exhaust system resources, causing a denial of service (DoS) condition. This vulnerability exists because rate limiting does not occur for certain incoming TCP connections. An attacker could exploit this vulnerability by sending a high rate of TCP connections to the server. A successful exploit could allow the attacker to cause TCP connection resources to grow rapidly until the Cisco BroadWorks Network Server becomes unusable. Note: To recover from this vulnerability, either Cisco BroadWorks Network Server software must be restarted or the Cisco BroadWorks Network Server node must be rebooted. For more information, see the section of this advisory. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.