Certain NETGEAR devices are affected by directory traversal. This affects M4300-28G before 12.0.2.15, M4300-52G before 12.0.2.15, M4300-28G-POE+ before 12.0.2.15, M4300-52G-POE+ before 12.0.2.15, M4300-8X8F before 12.0.2.15, M4300-12X12F before 12.0.2.15, M4300-24X24F before 12.0.2.15, M4300-24X before 12.0.2.15, M4300-48X before 12.0.2.15, and M4200 before 12.0.2.15.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects R6250 before V1.0.4.8, R6400 before V1.0.1.22, R6400v2 before V1.0.2.32, R7100LG before V1.0.0.32, R7300 before V1.0.0.52, R8300 before V1.0.2.94, R8500 before V1.0.2.100, D6220 before V1.0.0.28, D6400 before V1.0.0.60, and D8500 before V1.0.3.29.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects R6400 before 1.0.1.24, R7900 before 1.0.1.18, R8000 before 1.0.3.54, and R8500 before 1.0.2.100.

NETGEAR ReadyNAS OS 6 devices, running ReadyNAS OS versions prior to 6.8.0 are affected by incorrect configuration of security settings.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects R6700 before 1.0.1.26, R7000 before 1.0.9.10, R7100LG before 1.0.0.32, R7900 before 1.0.1.18, R8000 before 1.0.3.54, and R8500 before 1.0.2.100.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects R6400v2 before 1.0.2.32, R7000P/R6900P before 1.0.0.56, R7900 before 1.0.1.18, R8300 before 1.0.2.100_1.0.82, R8500 before 1.0.2.100_1.0.82, and D8500 before 1.0.3.29.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects D6220 before 1.0.0.40, D6400 before 1.0.0.74, D7000 before 1.0.1.60, D7800 before 1.0.1.34, D8500 before 1.0.3.39, DGN2200v4 before 1.0.0.94, DGN2200Bv4 before 1.0.0.94, EX6200v2 before 1.0.1.50, EX7000 before 1.0.0.56, JR6150 before 1.0.1.18, R6050 before 1.0.1.10J, R6100 before 1.0.1.16, R6150 before 1.0.1.10, R6220 before 1.1.0.50, R6250 before 1.0.4.12, R6300v2 before 1.0.4.12, R6400 before 1.0.1.24, R6400v2 before 1.0.2.32, R6700 before 1.0.1.26, R6700v2 before 1.2.0.4, R6800 before 1.0.1.10, R6900 before 1.0.1.26, R6900P before 1.0.0.58, R6900v2 before 1.2.0.4, R7000 before 1.0.9.6, R7000P before 1.0.0.58, R7100LG before 1.0.0.32, R7300 before 1.0.0.54, R7500 before 1.0.0.112, R7500v2 before 1.0.3.20, R7800 before 1.0.2.36, R7900 before 1.0.1.18, R8000 before 1.0.3.48, R8300 before 1.0.2.104, R8500 before 1.0.2.104, R9000 before 1.0.2.40, WNDR3400v3 before 1.0.1.14, WNDR3700v4 before 1.0.2.96, WNDR4300v1 before 1.0.2.98, WNDR4300v2 before 1.0.0.48, WNDR4500v3 before 1.0.0.48, and WNR3500Lv2 before 1.2.0.44.

Certain NETGEAR devices are affected by disclosure of administrative credentials. This affects R6700v2 before 1.1.0.38, R6800 before 1.1.0.38, and D7000 before 1.0.1.50.

Certain NETGEAR devices are affected by administrative password disclosure. This affects D6220 before V1.0.0.28, D6400 before V1.0.0.60, D8500 before V1.0.3.29, DGN2200v4 before 1.0.0.82, DGN2200Bv4 before 1.0.0.82, R6300v2 before 1.0.4.8, R6400 before 1.0.1.20, R6700 before 1.0.1.20, R6900 before 1.0.1.20, R7000 before 1.0.7.10, R7100LG before V1.0.0.32, R7300DST before 1.0.0.52, R7900 before 1.0.1.16, R8000 before 1.0.3.36, R8300 before 1.0.2.94, R8500 before 1.0.2.94, WNDR3400v3 before 1.0.1.12, and WNR3500Lv2 before 1.2.0.40.

Certain NETGEAR devices are affected by disclosure of administrative credentials. This affects R6700v2 before 1.1.0.38, R6800 before 1.1.0.38, and D7000 before 1.0.1.50.

Certain NETGEAR devices are affected by disclosure of administrative credentials. This affects R6700v2 before 1.1.0.38 and R6800 before 1.1.0.38.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects R6400v2 before 1.0.4.84, R6700v3 before 1.0.4.84, R7000 before 1.0.11.126, R6900P before 1.3.2.126, and R7000P before 1.3.2.126.

Certain NETGEAR devices are affected by disclosure of sensitive information. A UPnP request reveals a device's serial number, which can be used for a password reset. This affects D7800 before 1.0.1.66, EX2700 before 1.0.1.68, WN3000RPv2 before 1.0.0.90, WN3000RPv3 before 1.0.2.100, LBR1020 before 2.6.5.20, LBR20 before 2.6.5.32, R6700AX before 1.0.10.110, R7800 before 1.0.2.86, R8900 before 1.0.5.38, R9000 before 1.0.5.38, RAX10 before 1.0.10.110, RAX120v1 before 1.2.3.28, RAX120v2 before 1.2.3.28, RAX70 before 1.0.10.110, RAX78 before 1.0.10.110, XR450 before 2.3.2.130, XR500 before 2.3.2.130, and XR700 before 1.0.1.46.

NETGEAR FVS318 running firmware 1.1 stores the username and password in a readable format when a backup of the configuration file is made, which allows local users to obtain sensitive information.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects D3600 before 1.0.0.76 and D6000 before 1.0.0.76.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects D6200 before 1.1.00.40, D7000 before 1.0.1.78, R6020 before 1.0.0.46, R6080 before 1.0.0.46, R6120 before 1.0.0.72, R6220 before 1.1.0.100, R6230 before 1.1.0.100, R6260 before 1.1.0.76, R6700v2 before 1.2.0.74, R6800 before 1.2.0.74, R6900v2 before 1.2.0.74, R7450 before 1.2.0.74, AC2100 before 1.2.0.74, AC2400 before 1.2.0.74, and AC2600 before 1.2.0.74.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects D7800 before 1.0.1.58, R7800 before 1.0.2.74, R8900 before 1.0.5.18, R9000 before 1.0.5.18, and XR700 before 1.0.1.34.

An Authentication vulnerability exists in NETGEAR WGR614 v7 and v9 due to a hardcoded credential used for serial programming, a related issue to CVE-2006-1002.

Login credentials are inadvertently recorded in logs if a Syslog Server is configured in NETGEAR WAX610 and WAX610Y (AX1800 Dual Band PoE Multi-Gig Insight Managed WiFi 6 Access Points). An user having access to the syslog server can read the logs containing these credentials.  This issue affects WAX610: before 10.8.11.4; WAX610Y: before 10.8.11.4. Devices managed with Insight get automatic updates. If not, please check the firmware version and update to the latest. Fixed in: WAX610 firmware 11.8.0.10 or later. WAX610Y firmware 11.8.0.10 or later.

NETGEAR WAC505 devices before 8.2.1.16 are affected by disclosure of sensitive information.

Netgear WNR614 JNR1010V2/N300-V1.1.0.54_1.0.1 was discovered to store credentials in plaintext.

Netgear Nighthawk R6700 version 1.0.4.120 stores sensitive information in plaintext. All usernames and passwords for the device's associated services are stored in plaintext on the device. For example, the admin password is stored in plaintext in the primary configuration file on the device.

NETGEAR RAX30 Device Configuration Cleartext Storage Information Disclosure Vulnerability. This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of NETGEAR RAX30 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of device configuration. The issue results from the storage of configuration secrets in plaintext. An attacker can leverage this vulnerability to disclose stored credentials, leading to further compromise. Was ZDI-CAN-19841.

A vulnerability classified as problematic was found in Netgear DG834Gv5 1.6.01.34. This vulnerability affects unknown code of the component Web Management Interface. The manipulation leads to cleartext storage of sensitive information. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-262126 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been identified in SIMATIC RTLS Locating Manager (All versions < V2.12). The affected application writes sensitive data, such as database credentials in configuration files. A local attacker with access to the configuration files could use this information to launch further attacks.

An issue in Texas Instruments Fusion Digital Power Designer v.7.10.1 allows a local attacker to obtain sensitive information via the plaintext storage of credentials

The Files APP 7.1.1.308 and earlier versions in some Huawei mobile phones has a vulnerability of plaintext storage of users' Safe passwords. An attacker with the root privilege of an Android system could forge the Safe to read users' plaintext Safe passwords, leading to information leak.

Avast Free Antivirus prior to 19.1.2360 stores user credentials in memory upon login, which allows local users to obtain sensitive information by dumping AvastUI.exe application memory and parsing the data.

Plaintext vulnerability in the Gallery search module. Impact: Successful exploitation of this vulnerability will affect availability.

A vulnerability was found in SICUNET Access Controller 0.32-05z. It has been declared as problematic. This vulnerability affects unknown code of the component Password Storage. The manipulation leads to weak encryption. Attacking locally is a requirement.

IBM Concert 1.0.0 through 2.1.0 stores potentially sensitive information in log files that could be read by a local user.

Application Access Server (A-A-S) 2.0.48 stores (1) passwords and (2) the port keyword in cleartext in aas.ini, which allows local users to obtain sensitive information by reading this file.

A cleartext storage of sensitive information vulnerability [CWE-312] in FortiTester 2.3.0 through 7.2.3 may allow an attacker with access to the DB contents to retrieve the plaintext password of external servers configured in the device.

Feedbacksystem is a personalized feedback system for students using artificial intelligence. Passwords of users using LDAP login are stored in clear text in the database. The LDAP users password is passed unencrypted in the LoginController.scala and stored in the database when logging in for the first time. Users using only local login or the cas login are not affected. This issue has been patched in version 1.19.2.

Dell ECS, versions 3.8.1.0 through 3.8.1.7, and Dell ObjectScale versions prior to 4.2.0.0, contains a Cleartext Storage of Sensitive Information vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Information disclosure.

A vulnerability in a password management API in Brocade Fabric OS versions before v9.2.1, v9.2.0b, v9.1.1d, and v8.2.3e prints sensitive information in log files. This could allow an authenticated user to view the server passwords for protocols such as scp and sftp. Detail. When the firmwaredownload command is incorrectly entered or points to an erroneous file, the firmware download log captures the failed command, including any password entered in the command line.

A vulnerability in Brocade SANnav before v2.3.1 and v2.3.0a could allow an authenticated user to print the Auth, Priv, and SSL key store passwords in unencrypted logs by manipulating command variables.

phpMyAdmin before 2.11.5.1 stores the MySQL (1) username and (2) password, and the (3) Blowfish secret key, in cleartext in a Session file under /tmp, which allows local users to obtain sensitive information.

An issue in Shenzen Tenda Technology CP3V2.0 V11.10.00.2311090948 allows a local attacker to obtain sensitive information via the password component.

On BIG-IP 15.0.0-15.0.1, 14.1.0-14.1.2, 14.0.0-14.0.1, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.1-11.6.5, vCMP hypervisors are incorrectly exposing the plaintext unit key for their vCMP guests on the filesystem.

A vulnerability in the logging component of Cisco Duo Authentication for Windows Logon and RDP could allow an authenticated, local attacker to view sensitive information in clear text on an affected system. This vulnerability is due to improper storage of an unencrypted registry key in certain logs. An attacker could exploit this vulnerability by accessing the logs on an affected system. A successful exploit could allow the attacker to view sensitive information in clear text.

Crestron AM-100 with firmware 1.6.0.2 and AM-101 with firmware 2.7.0.2 stores usernames, passwords, slideshow passcode, and other configuration options in cleartext in the file /tmp/scfgdndf. A local attacker can use this vulnerability to recover sensitive data.

IBM Security Identity Manager Virtual Appliance 7.0.2 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 171512.

Information Disclosure vulnerability in McAfee DXL Platform and TIE Server in DXL prior to 5.0.1 HF2 and TIE prior to 2.3.1 HF1 allows Authenticated users to view sensitive information in plain text via the GUI or command line.

MELAG FTP Server 2.2.0.4 stores unencrpyted passwords of FTP users in a local configuration file.

SnapCenter versions prior to 4.5 are susceptible to a vulnerability which could allow a local authenticated attacker to discover plaintext HANA credentials.

Rich Text Edit Control Information Disclosure Vulnerability

Capturix ScanShare 1.06 build 50 stores sensitive information such as the password in cleartext in capturixss_cfg.ini, which is readable by local users.

A vulnerability has been identified in SIMATIC PCS 7 V8.2 (All versions), SIMATIC PCS 7 V9.0 (All versions), SIMATIC PCS 7 V9.1 (All versions < V9.1 SP1), SIMATIC WinCC V15 and earlier (All versions < V15 SP1 Update 7), SIMATIC WinCC V16 (All versions < V16 Update 5), SIMATIC WinCC V17 (All versions < V17 Update 2), SIMATIC WinCC V17 (All versions <= V17 Update 4), SIMATIC WinCC V7.4 (All versions < V7.4 SP1 Update 19), SIMATIC WinCC V7.5 (All versions < V7.5 SP2 Update 6). The affected component stores the credentials of a local system account in a potentially publicly accessible project file using an outdated cipher algorithm. An attacker may use this to brute force the credentials and take over the system.

IBM Security Guardium 10.5 stores user credentials in plain clear text which can be read by a local privileged user. IBM X-Force ID: 215589.