Cradlepoint IBR600 NCOS versions 6.5.0.160bc2e and prior are vulnerable to shell escape, which enables local attackers with non-superuser credentials to gain full, unrestrictive shell access which may allow an attacker to execute arbitrary code.

An exploitable use of hard-coded credentials vulnerability exists in multiple iw_* utilities of the Moxa AWK-3131A firmware version 1.13. The device operating system contains an undocumented encryption password, allowing for the creation of custom diagnostic scripts.

In Moxa ioLogik 2500 series firmware, Version 3.0 or lower, and IOxpress configuration utility, Version 2.3.0 or lower, sensitive information is stored in configuration files without encryption, which may allow an attacker to access an administrative account.

An issue was discovered on Moxa MGate MB3170 and MB3270 devices before 4.1, MB3280 and MB3480 devices before 3.1, MB3660 devices before 2.3, and MB3180 devices before 2.1. The application's configuration file contains parameters that represent passwords in cleartext.

Sensitive Information Stored in Clear Text in Moxa ThingsPro IIoT Gateway and Device Management Software Solutions version 2.1.

Moxa Secure Router EDR-G903 devices before 3.4.12 allow remote attackers to discover cleartext passwords by reading a configuration file.

In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: dcp: fix leak of blob encryption key Trusted keys unseal the key blob on load, but keep the sealed payload in the blob field so that every subsequent read (export) will simply convert this field to hex and send it to userspace. With DCP-based trusted keys, we decrypt the blob encryption key (BEK) in the Kernel due hardware limitations and then decrypt the blob payload. BEK decryption is done in-place which means that the trusted key blob field is modified and it consequently holds the BEK in plain text. Every subsequent read of that key thus send the plain text BEK instead of the encrypted BEK to userspace. This issue only occurs when importing a trusted DCP-based key and then exporting it again. This should rarely happen as the common use cases are to either create a new trusted key and export it, or import a key blob and then just use it without exporting it again. Fix this by performing BEK decryption and encryption in a dedicated buffer. Further always wipe the plain text BEK buffer to prevent leaking the key via uninitialized memory.

An issue in Texas Instruments Fusion Digital Power Designer v.7.10.1 allows a local attacker to obtain sensitive information via the plaintext storage of credentials

Plaintext vulnerability in the Gallery search module. Impact: Successful exploitation of this vulnerability will affect availability.

NCH Express Accounts 8.24 and earlier allows local users to discover the cleartext password by reading the configuration file.

An issue was discovered in WiZ Colors A60 1.14.0. Wi-Fi credentials are stored in cleartext in flash memory, which presents an information-disclosure risk for a discarded or resold device.

An information disclosure vulnerability allows sensitive key material to be included in technical support archives in Sophos Connect versions older than 2.2.90.

IBM MQ 7.5, 8.0, 9.0 LTS, 9.1 CD, and 9.1 LTS stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 211403.

IBM Java Security Components in IBM SDK, Java Technology Edition 8 before SR1 FP10, 7 R1 before SR3 FP10, 7 before SR9 FP10, 6 R1 before SR8 FP7, 6 before SR16 FP7, and 5.0 before SR16 FP13 stores plaintext information in memory dumps, which allows local users to obtain sensitive information by reading a file.

IBM Cognos Analytics 11.1.7, 11.2.0, and 11.2.1 stores user credentials in plain clear text which can be read by a local privileged user. IBM X-Force ID: 213554.

Unproper laxist permissions on the temporary files used by MIME4J TempFileStorageProvider may lead to information disclosure to other local users. This issue affects Apache James MIME4J version 0.8.8 and prior versions. We recommend users to upgrade to MIME4j version 0.8.9 or later.

Dell PowerScale OneFS, 9.0.0.x-9.4.0.x, contain a cleartext storage of sensitive information vulnerability in S3 component. An authenticated local attacker could potentially exploit this vulnerability, leading to information disclosure.

A Cleartext Storage of Sensitive Information vulnerability in suppportutils of SUSE Linux Enterprise Server 12, SUSE Linux Enterprise Server 15, SUSE Linux Enterprise Server 15 SP3 allows attackers that get access to the support logs to gain knowledge of the stored credentials This issue affects: SUSE Linux Enterprise Server 12 supportutils version 3.0.10-95.51.1CWE-312: Cleartext Storage of Sensitive Information and prior versions. SUSE Linux Enterprise Server 15 supportutils version 3.1.21-150000.5.44.1 and prior versions. SUSE Linux Enterprise Server 15 SP3 supportutils version 3.1.21-150300.7.35.15.1 and prior versions.

A vulnerability in a password management API in Brocade Fabric OS versions before v9.2.1, v9.2.0b, v9.1.1d, and v8.2.3e prints sensitive information in log files. This could allow an authenticated user to view the server passwords for protocols such as scp and sftp. Detail. When the firmwaredownload command is incorrectly entered or points to an erroneous file, the firmware download log captures the failed command, including any password entered in the command line.

A vulnerability has been identified in SIMATIC STEP 7 (TIA Portal) (All versions < V19). An information disclosure vulnerability could allow a local attacker to gain access to the access level password of the SIMATIC S7-1200 and S7-1500 CPUs, when entered by a legitimate user in the hardware configuration of the affected application.

An issue in Shenzen Tenda Technology CP3V2.0 V11.10.00.2311090948 allows a local attacker to obtain sensitive information via the password component.

IBM Cloud Pak for Security 1.10.0.0 through 1.10.11.0 and IBM QRadar Suite Software 1.10.12.0 through 1.10.22.0 stores potentially sensitive information in log files that could be read by a local user. IBM X-Force ID: 281429.

The vulnerability could expose cleartext credentials from AVEVA InTouch Runtime 2020 R2 and all prior versions (WindowViewer) if an authorized, privileged user creates a diagnostic memory dump of the process and saves it to a non-protected location.

A cleartext storage of sensitive information vulnerability exists in PcVue versions 8.10 through 15.2.3. This could allow an unauthorized user with access the email and short messaging service (SMS) accounts configuration files to discover the associated simple mail transfer protocol (SMTP) account credentials and the SIM card PIN code. Successful exploitation of this vulnerability could allow an unauthorized user access to the underlying email account and SIM card.

NVIDIA BMC stores user passwords in an obfuscated form in a database accessible by the host. This may lead to a credentials exposure.

A vulnerability in the logging component of Cisco Duo Authentication for Windows Logon and RDP could allow an authenticated, local attacker to view sensitive information in clear text on an affected system. This vulnerability is due to improper storage of an unencrypted registry key in certain logs. An attacker could exploit this vulnerability by accessing the logs on an affected system. A successful exploit could allow the attacker to view sensitive information in clear text.

Wowza Streaming Engine before 4.8.8.01 (in a default installation) has cleartext passwords stored in the conf/admin.password file. A regular local user is able to read usernames and passwords.

When the Windows Tentacle docker image starts up it logs all the commands that it runs along with the arguments, which writes the Octopus Server API key in plaintext. This does not affect the Linux Docker image

A vulnerability in Brocade SANnav before v2.3.1 and v2.3.0a could allow an authenticated user to print the Auth, Priv, and SSL key store passwords in unencrypted logs by manipulating command variables.

IBM Jazz for Service Management 1.1.3.10 and IBM Tivoli Netcool/OMNIbus_GUI displays user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 207610.

TP-Link's TL-WPA4220 4.0.2 Build 20180308 Rel.37064 does not use SSL by default. Attacker on the local network can monitor traffic and capture the cookie and other sensitive information.

An issue was discovered in the A4N (Aremis 4 Nomad) application 1.5.0 for Android. It uses a local database to store data and accounts. However, the password is stored in cleartext. Therefore, an attacker can retrieve the passwords of other users that used the same device.

A vulnerability was found in SICUNET Access Controller 0.32-05z. It has been declared as problematic. This vulnerability affects unknown code of the component Password Storage. The manipulation leads to weak encryption. Attacking locally is a requirement.

Dell SupportAssist for Home PCs (version 3.11.4 and prior) and  SupportAssist for Business PCs (version 3.2.0 and prior) contain information disclosure vulnerability. A local malicious user with low privileges could exploit this vulnerability to view and modify sensitive information in the database of the affected application.

ZOLL Defibrillator Dashboard, v prior to 2.2, The affected products contain credentials stored in plaintext. This could allow an attacker to gain access to sensitive information.

An issue was discovered in SmartFoxServer 2.17.0. Cleartext password disclosure can occur via /config/server.xml.

A vulnerability of storing sensitive information insecurely in Property Settings prior to SMR Nov-2021 Release 1 allows attackers to read ESN value without priviledge.

The vCenter Server contains an information disclosure vulnerability due to the logging of credentials in plaintext. A malicious actor with access to a workstation that invoked a vCenter Server Appliance ISO operation (Install/Upgrade/Migrate/Restore) can access plaintext passwords used during that operation.

A CWE-312: Cleartext Storage of Sensitive Information vulnerability exists in Easergy Builder (Version 1.4.7.2 and older) which could allow an attacker to read user credentials.

IBM UrbanCode Deploy (UCD) 7.0.3.0, 7.0.4.0, 7.0.5.3, 7.0.5.4, 7.1.0.0, 7.1.1.0, 7.1.1.1, and 7.1.1.2, stores keystore passwords in plain text after a manual edit, which can be read by a local user. IBM X-Force ID: 191944.

IBM Verify Gateway (IVG) 1.0.0 and 1.0.1 stores highly sensitive information in cleartext that could be obtained by a user. IBM X-Force ID: 179004.

Capturix ScanShare 1.06 build 50 stores sensitive information such as the password in cleartext in capturixss_cfg.ini, which is readable by local users.

Jenkins NeuVector Vulnerability Scanner Plugin 1.5 and earlier stored credentials unencrypted in its global configuration file on the Jenkins master where they could be viewed by users with access to the master file system.

Microsoft Outlook plug-in PGP version 7.0, 7.0.3, and 7.0.4 silently saves a decrypted copy of a message to hard disk when "Automatically decrypt/verify when opening messages" option is checked, "Always use Secure Viewer when decrypting" option is not checked, and the user replies to an encrypted message.

Jenkins Zephyr for JIRA Test Management Plugin 1.5 and earlier stores its credentials in plain text in a global configuration file on the Jenkins master file system.

A cleartext storage of sensitive information vulnerability [CWE-312] in FortiTester 2.3.0 through 7.2.3 may allow an attacker with access to the DB contents to retrieve the plaintext password of external servers configured in the device.

A flaw was found in Red Hat's AMQ Broker, which stores certain passwords in a secret security-properties-prop-module, defined in ActivemqArtemisSecurity CR; however, they are shown in plaintext in the StatefulSet details yaml of AMQ Broker.

Cleartext storage of sensitive information in Zoom Client SDK for Windows before 5.15.0 may allow an authenticated user to enable an information disclosure via local access.