Improper Resource Shutdown or Release vulnerability in Mitsubishi Electric Corporation MELSEC iQ-R Series R00/01/02CPU Firmware versions "32" and prior, Mitsubishi Electric Corporation MELSEC iQ-R Series R04/08/16/32/120(EN)CPU Firmware versions "65" and prior, Mitsubishi Electric Corporation MELSEC iQ-R Series R08/16/32/120SFCPU Firmware versions "29" and prior, Mitsubishi Electric Corporation MELSEC iQ-R Series R08/16/32/120PSFCPU Firmware versions "08" and prior, Mitsubishi Electric Corporation MELSEC iQ-R Series R12CCPU-V Firmware versions "17" and prior, Mitsubishi Electric Corporation MELSEC iQ-L Series L04/08/16/32HCPU Firmware versions "05" and prior and Mitsubishi Electric Corporation MELIPC Series MI5122-VW Firmware versions "07" and prior allows a remote unauthenticated attacker to cause a Denial of Service condition in Ethernet communication on the module by sending specially crafted packets. A system reset of the module is required for recovery.

Improper Input Validation vulnerability in Mitsubishi Electric MELSEC iQ-R Series R00/01/02CPU, MELSEC iQ-R Series R04/08/16/32/120(EN)CPU, MELSEC iQ-R Series R08/16/32/120SFCPU, MELSEC iQ-R Series R08/16/32/120PCPU, MELSEC iQ-R Series R08/16/32/120PSFCPU, MELSEC iQ-R Series R16/32/64MTCPU, MELSEC iQ-R Series R12CCPU-V, MELSEC Q Series Q03UDECPU, MELSEC Q Series Q04/06/10/13/20/26/50/100UDEHCPU, MELSEC Q Series Q03/04/06/13/26UDVCPU, MELSEC Q Series Q04/06/13/26UDPVCPU, MELSEC Q Series Q12DCCPU-V, MELSEC Q Series Q24DHCCPU-V(G), MELSEC Q Series Q24/26DHCCPU-LS, MELSEC Q Series MR-MQ100, MELSEC Q Series Q172/173DCPU-S1, MELSEC Q Series Q172/173DSCPU, MELSEC Q Series Q170MCPU, MELSEC Q Series Q170MSCPU(-S1), MELSEC L Series L02/06/26CPU(-P), MELSEC L Series L26CPU-(P)BT and MELIPC Series MI5122-VW allows a remote unauthenticated attacker to cause a denial-of-service (DoS) condition by sending specially crafted packets. System reset is required for recovery.

Uncontrolled Resource Consumption vulnerability in Mitsubishi Electric MELSEC iQ-R Series R00/01/02CPU, MELSEC iQ-R Series R04/08/16/32/120(EN)CPU, MELSEC iQ-R Series R08/16/32/120SFCPU, MELSEC iQ-R Series R08/16/32/120PCPU, MELSEC iQ-R Series R08/16/32/120PSFCPU, MELSEC iQ-R Series R16/32/64MTCPU, MELSEC iQ-R Series R12CCPU-V, MELSEC Q Series Q03UDECPU, MELSEC Q Series Q04/06/10/13/20/26/50/100UDEHCPU, MELSEC Q Series Q03/04/06/13/26UDVCPU, MELSEC Q Series Q04/06/13/26UDPVCPU, MELSEC Q Series Q12DCCPU-V, MELSEC Q Series Q24DHCCPU-V(G), MELSEC Q Series Q24/26DHCCPU-LS, MELSEC Q Series MR-MQ100, MELSEC Q Series Q172/173DCPU-S1, MELSEC Q Series Q172/173DSCPU, MELSEC Q Series Q170MCPU, MELSEC Q Series Q170MSCPU(-S1), MELSEC L Series L02/06/26CPU(-P), MELSEC L Series L26CPU-(P)BT and MELIPC Series MI5122-VW allows a remote unauthenticated attacker to cause a denial-of-service (DoS) condition by sending specially crafted packets. System reset is required for recovery.

Improper Handling of Length Parameter Inconsistency vulnerability in Mitsubishi Electric MELSEC iQ-R Series R00/01/02CPU, MELSEC iQ-R Series R04/08/16/32/120(EN)CPU, MELSEC iQ-R Series R08/16/32/120SFCPU, MELSEC iQ-R Series R08/16/32/120PCPU, MELSEC iQ-R Series R08/16/32/120PSFCPU, MELSEC iQ-R Series R16/32/64MTCPU, MELSEC iQ-R Series R12CCPU-V, MELSEC Q Series Q03UDECPU, MELSEC Q Series Q04/06/10/13/20/26/50/100UDEHCPU, MELSEC Q Series Q03/04/06/13/26UDVCPU, MELSEC Q Series Q04/06/13/26UDPVCPU, MELSEC Q Series Q12DCCPU-V, MELSEC Q Series Q24DHCCPU-V(G), MELSEC Q Series Q24/26DHCCPU-LS, MELSEC Q Series MR-MQ100, MELSEC Q Series Q172/173DCPU-S1, MELSEC Q Series Q172/173DSCPU, MELSEC Q Series Q170MCPU, MELSEC Q Series Q170MSCPU(-S1), MELSEC L Series L02/06/26CPU(-P), MELSEC L Series L26CPU-(P)BT and MELIPC Series MI5122-VW allows a remote unauthenticated attacker to cause a denial-of-service (DoS) condition by sending specially crafted packets. System reset is required for recovery.

An issue was discovered on Epson WorkForce WF-2861 10.48 LQ22I3, 10.51.LQ20I6 and 10.52.LQ17IA devices. On the 'Air Print Setting' web page, if the data for 'Bonjour Service Location' at /PRESENTATION/BONJOUR is more than 251 bytes when sending data for Air Print Setting, then the device no longer functions until a reboot.

Insufficient bound checks in the SMU may allow an attacker to update the from/to address space to an invalid value potentially resulting in a denial of service.

There is a Mismatched Memory Management Routines vulnerability in the Exiv2::FileIo::seek function of Exiv2 0.26 that will lead to a remote denial of service attack (heap memory corruption) via crafted input.

The ProcessMimeEntity function in util-decode-mime.c in Suricata 4.x before 4.0.6 allows remote attackers to cause a denial of service (segfault and daemon crash) via crafted input to the SMTP parser, as exploited in the wild in November 2018.

Insufficient bound checks in the SMU may allow an attacker to update the SRAM from/to address space to an invalid value potentially resulting in a denial of service.

A vulnerability in Cisco WebEx Meetings Server could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to insufficient limitations on the number of connections that can be made to the affected software. An attacker could exploit this vulnerability by opening multiple connections to the server and exhausting server resources. A successful exploit could cause the server to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvf41006.

The _CFNetConnectionWillEnqueueRequests function in CFNetwork 129.19 on Apple Mac OS X 10.4 through 10.4.10 allows remote attackers to cause a denial of service (application crash) via a crafted HTTP 301 response, which results in a NULL pointer dereference.

Buffer overflow in the GetStatistics64 remote procedure call (RPC) in OpenAFS 1.4.8 before 1.6.7 allows remote attackers to cause a denial of service (crash) via a crafted statsVersion argument.

The html package (aka x/net/html) through 2018-09-17 in Go mishandles <template><tBody><isindex/action=0>, leading to a "panic: runtime error" in inBodyIM in parse.go during an html.Parse call.

A vulnerability in the bidirectional forwarding detection (BFD) hardware offload feature of Cisco IOS XR Software for Cisco ASR 9000 Series Aggregation Services Routers, ASR 9902 Compact High-Performance Routers, and ASR 9903 Compact High-Performance Routers could allow an unauthenticated, remote attacker to cause a line card to reset, resulting in a denial of service (DoS) condition. This vulnerability is due to the incorrect handling of malformed BFD packets that are received on line cards where the BFD hardware offload feature is enabled. An attacker could exploit this vulnerability by sending a crafted IPv4 BFD packet to an affected device. A successful exploit could allow the attacker to cause line card exceptions or a hard reset, resulting in loss of traffic over that line card while the line card reloads.

A vulnerability in the gRPC code of Cisco IOS XR Software for Cisco Network Convergence System (NCS) 5500 Series Routers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition when the emsd service stops. The vulnerability is due to the software's inability to process HTTP/2 packets. An attacker could exploit this vulnerability by sending a malformed HTTP/2 frame to the affected device. A successful exploit could allow the attacker to create a DoS condition when the emsd service stops. Cisco Bug IDs: CSCvb99388.

Multiple off-by-one errors in fsplib.c in fsplib before 0.8 allow attackers to cause a denial of service via unspecified vectors involving the (1) name and (2) d_name entry attributes.

A vulnerability in the implementation of Session Initiation Protocol (SIP) functionality in Cisco Small Business SPA50x, SPA51x, and SPA52x Series IP Phones could allow an unauthenticated, remote attacker to cause an affected device to become unresponsive, resulting in a denial of service (DoS) condition. The vulnerability is due to the improper handling of SIP request messages by an affected device. An attacker could exploit this vulnerability by using formatted specifiers in a SIP payload that is sent to an affected device. A successful exploit could allow the attacker to cause the affected device to become unresponsive, resulting in a DoS condition that persists until the device is restarted manually. This vulnerability affects Cisco Small Business SPA50x, SPA51x, and SPA52x Series IP Phones that are running firmware release 7.6.2SR1 or earlier. Cisco Bug IDs: CSCvc63986.

A vulnerability was found in TRENDnet TEW-652BRP 3.04B01. It has been declared as critical. This vulnerability affects unknown code of the file cfg_op.ccp of the component Web Service. The manipulation leads to memory corruption. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-219958 is the identifier assigned to this vulnerability.

An issue was discovered in libpbc.a in cloudwu PBC through 2017-03-02. A SEGV can occur in wiretype_decode in context.c.

Buffer overflow in hasplms in Gemalto ACC (Admin Control Center), all versions ranging from HASP SRM 2.10 to Sentinel LDK 7.50, allows remote attackers to shut down the remote process (a denial of service) via a language pack (ZIP file) with invalid HTML files.

An issue was discovered in libpbc.a in cloudwu PBC through 2017-03-02. A SEGV can occur in pbc_pattern_set_default in pattern.c.

TP-Link WR840N devices have a buffer overflow via a long Authorization HTTP header.

Heap-based buffer overflow in Sophos Anti-Virus and Endpoint Security before 6.0.5, Anti-Virus for Linux before 5.0.10, and other platforms before 4.11, when archive scanning is enabled, allows remote attackers to trigger a denial of service (memory corruption) via a CHM file with an LZX decompression header that specifies a Window_size of 0.

Denial of Service in NetScaler Console (formerly NetScaler ADM), NetScaler Agent, and NetScaler SDX

When parsing a JSON payload with deeply nested JSON structures, the parser in Apache Mesos versions pre-1.4.x, 1.4.0 to 1.4.2, 1.5.0 to 1.5.1, 1.6.0 to 1.6.1, and 1.7.0 might overflow the stack due to unbounded recursion. A malicious actor can therefore cause a denial of service of Mesos masters rendering the Mesos-controlled cluster inoperable.

An FR-GV-206 issue in FreeRADIUS 2.x before 2.2.10 and 3.x before 3.0.15 allows "DHCP - Read overflow when decoding option 63" and a denial of service.

The cdf_read_property_info function in cdf.c in the Fileinfo component in PHP before 5.4.29 and 5.5.x before 5.5.13 allows remote attackers to cause a denial of service (infinite loop or out-of-bounds memory access) via a vector that (1) has zero length or (2) is too long.

I-O DATA DEVICE LAN DISK Connect Ver2.02 and earlier allows an attacker to cause a denial of service in the application via unspecified vectors.

An FR-GV-201 issue in FreeRADIUS 2.x before 2.2.10 and 3.x before 3.0.15 allows "Read / write overflow in make_secret()" and a denial of service.

Buffer overflow in H2O version 2.2.2 and earlier allows remote attackers to cause a denial-of-service in the server via unspecified vectors.

Multiple unspecified vulnerabilities in Dovecot before 1.0beta3 allow remote attackers to cause a denial of service (application crash or hang) via unspecified vectors involving (1) "potential hangs" in the APPEND command and "potential crashes" in (2) dovecot-auth and (3) imap/pop3-login. NOTE: vector 2 might be related to a double free vulnerability.

The Java process in the Impact server in Cisco Prime Central for Hosted Collaboration Solution (HCS) allows remote attackers to cause a denial of service (process crash) via a flood of TCP packets, aka Bug ID CSCug57345.

In Wireshark 2.6.0, the RTCP dissector could crash. This was addressed in epan/dissectors/packet-rtcp.c by avoiding a buffer overflow for packet status chunks.

Opera 9 allows remote attackers to cause a denial of service (crash) via a crafted web page that triggers an out-of-bounds memory access, related to an iframe and JavaScript that accesses certain style sheets properties.

klif.sys in Kaspersky Internet Security 6.0 and 7.0, Kaspersky Anti-Virus (KAV) 6.0 and 7.0, KAV 6.0 for Windows Workstations, and KAV 6.0 for Windows Servers does not validate certain parameters to the (1) NtCreateKey, (2) NtCreateProcess, (3) NtCreateProcessEx, (4) NtCreateSection, (5) NtCreateSymbolicLinkObject, (6) NtCreateThread, (7) NtDeleteValueKey, (8) NtLoadKey2, (9) NtOpenKey, (10) NtOpenProcess, (11) NtOpenSection, and (12) NtQueryValueKey hooked system calls, which allows local users to cause a denial of service (reboot) via an invalid parameter, as demonstrated by the ClientId parameter to NtOpenProcess.

Opera 9 allows remote attackers to cause a denial of service (crash) via an A tag with an href attribute with a URL containing a long hostname, which triggers an out-of-bounds operation.

libcurl may read outside of a heap allocated buffer when doing FTP. When libcurl connects to an FTP server and successfully logs in (anonymous or not), it asks the server for the current directory with the `PWD` command. The server then responds with a 257 response containing the path, inside double quotes. The returned path name is then kept by libcurl for subsequent uses. Due to a flaw in the string parser for this directory name, a directory name passed like this but without a closing double quote would lead to libcurl not adding a trailing NUL byte to the buffer holding the name. When libcurl would then later access the string, it could read beyond the allocated heap buffer and crash or wrongly access data beyond the buffer, thinking it was part of the path. A malicious server could abuse this fact and effectively prevent libcurl-based clients to work with it - the PWD command is always issued on new FTP connections and the mistake has a high chance of causing a segfault. The simple fact that this has issue remained undiscovered for this long could suggest that malformed PWD responses are rare in benign servers. We are not aware of any exploit of this flaw. This bug was introduced in commit [415d2e7cb7](https://github.com/curl/curl/commit/415d2e7cb7), March 2005. In libcurl version 7.56.0, the parser always zero terminates the string but also rejects it if not terminated properly with a final double quote.

Akka HTTP versions <= 10.0.5 Illegal Media Range in Accept Header Causes StackOverflowError Leading to Denial of Service

Nanopb is a small code-size Protocol Buffers implementation. In Nanopb before versions 0.4.4 and 0.3.9.7, decoding specifically formed message can leak memory if dynamic allocation is enabled and an oneof field contains a static submessage that contains a dynamic field, and the message being decoded contains the submessage multiple times. This is rare in normal messages, but it is a concern when untrusted data is parsed. This is fixed in versions 0.3.9.7 and 0.4.4. The following workarounds are available: 1) Set the option `no_unions` for the oneof field. This will generate fields as separate instead of C union, and avoids triggering the problematic code. 2) Set the type of the submessage field inside oneof to `FT_POINTER`. This way the whole submessage will be dynamically allocated and the problematic code is not executed. 3) Use an arena allocator for nanopb, to make sure all memory can be released afterwards.

tcmu-runner daemon version 0.9.0 to 1.2.0 is vulnerable to invalid memory references in the handler_glfs.so handler resulting in denial of service

In BlueZ 5.42, a buffer over-read was observed in "l2cap_dump" function in "tools/parser/l2cap.c" source file. This issue can be triggered by processing a corrupted dump file and will result in hcidump crash.

Heap-based buffer overflow in the alpha strip capability in libpng 1.2.7 allows context-dependent attackers to cause a denial of service (crash) when the png_do_strip_filler function is used to strip alpha channels out of the image.

In BlueZ 5.42, a buffer overflow was observed in "read_n" function in "tools/hcidump.c" source file. This issue can be triggered by processing a corrupted dump file and will result in hcidump crash.

In BlueZ 5.42, an out-of-bounds read was observed in "le_meta_ev_dump" function in "tools/parser/hci.c" source file. This issue exists because 'subevent' (which is used to read correct element from 'ev_le_meta_str' array) is overflowed.

In BlueZ 5.42, a buffer overflow was observed in "pin_code_reply_dump" function in "tools/parser/hci.c" source file. The issue exists because "pin" array is overflowed by supplied parameter due to lack of boundary checks on size of the buffer from frame "pin_code_reply_cp *cp" parameter.