An issue was discovered in libezxml.a in ezXML 0.8.6. The function ezxml_decode() performs incorrect memory handling while parsing crafted XML files, leading to a heap-based buffer overflow.

A vulnerability was discovered in the indexOf function of JSONParserByteArray in JSON Smart versions 1.3 and 2.4 which causes a denial of service (DOS) via a crafted web request.

In Point to MultiPoint (P2MP) scenarios within established sessions between network or adjacent neighbors the improper use of a source to destination copy write operation combined with a Stack-based Buffer Overflow on certain specific packets processed by the routing protocol daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved sent by a remote unauthenticated network attacker causes the RPD to crash causing a Denial of Service (DoS). Continued receipt and processing of these packets will create a sustained Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS 19.2 versions prior to 19.2R3-S2; 19.3 versions prior to 19.3R2-S6, 19.3R3-S2; 19.4 versions prior to 19.4R1-S4, 19.4R2-S4, 19.4R3-S3; 20.1 versions prior to 20.1R2-S2, 20.1R3; 20.2 versions prior to 20.2R2-S3, 20.2R3; 20.3 versions prior to 20.3R2. This issue does not affect Juniper Networks Junos OS versions prior to 19.2R1. Juniper Networks Junos OS Evolved 20.1 versions prior to 20.1R3-EVO; 20.2 versions prior to 20.2R3-EVO; 20.3 versions prior to 20.3R2-EVO.

Triangle MicroWorks SCADA Data Gateway 3.02.0697 through 4.0.122, 2.41.0213 through 4.0.122 allows remote attackers cause a denial-of-service condition due to a lack of proper validation of the length of user-supplied data, prior to copying it to a fixed-length stack-based buffer. Authentication is not required to exploit this vulnerability.

The HC.Server service in Hosting Controller HC10 10.14 allows an Invalid Pointer Write DoS.

xpdfreader 4.03 is vulnerable to Buffer Overflow.

On Juniper Networks Junos OS and Junos OS Evolved devices processing a specially crafted BGP UPDATE or KEEPALIVE message can lead to a routing process daemon (RPD) crash and restart, causing a Denial of Service (DoS). Continued receipt and processing of this message will create a sustained Denial of Service (DoS) condition. This issue affects both IBGP and EBGP deployments over IPv4 or IPv6. This issue affects: Juniper Networks Junos OS: 17.3 versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R2-S13, 17.4R3-S4; 18.1 versions prior to 18.1R3-S12; 18.2 versions prior to 18.2R2-S8, 18.2R3-S7; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R1-S8, 18.4R2-S7, 18.4R3-S7; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S4; 19.2 versions prior to 19.2R1-S6, 19.2R3-S1; 19.3 versions prior to 19.3R2-S5, 19.3R3-S1; 19.4 versions prior to 19.4R1-S4, 19.4R1-S4, 19.4R2-S3, 19.4R3-S1; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R2; 20.3 versions prior to 20.3R1-S1, 20.3R2. Juniper Networks Junos OS Evolved: 20.3 versions prior to 20.3R2-EVO.

An issue was discovered in HCC embedded InterNiche 4.0.1. A potential heap buffer overflow exists in the code that parses the HTTP POST request, due to an incorrect signed integer comparison. This vulnerability requires the attacker to send a malformed HTTP packet with a negative Content-Length, which bypasses the size checks and results in a large heap overflow in the wbs_multidata buffer copy.

A heap-based buffer overflow was discovered in upx, during the generic pointer 'p' points to an inaccessible address in func get_le32(). The problem is essentially caused in PackLinuxElf32::elf_lookup() at p_lx_elf.cpp:5382.

CODESYS V2 runtime system SP before 2.4.7.55 has a Heap-based Buffer Overflow.

A heap-based buffer overflows was discovered in upx, during the generic pointer 'p' points to an inaccessible address in func get_le32(). The problem is essentially caused in PackLinuxElf32::elf_lookup() at p_lx_elf.cpp:5349

FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to version 1.10.10, FreeSWITCH allows remote users to trigger out of bounds write by offering an ICE candidate with unknown component ID. When an SDP is offered with any ICE candidates with an unknown component ID, FreeSWITCH will make an out of bounds write to its arrays. By abusing this vulnerability, an attacker is able to corrupt FreeSWITCH memory leading to an undefined behavior of the system or a crash of it. Version 1.10.10 contains a patch for this issue.

A heap-based buffer overflow was discovered in upx, during the generic pointer 'p' points to an inaccessible address in func get_le64().

The OneLine32 function in io-ico.c in gdk-pixbuf before 2.35.3 allows remote attackers to cause a denial of service (out-of-bounds write and crash) via crafted dimensions in an ICO file.

NTSC-CRT 2.2.1 has an integer overflow and out-of-bounds write in loadBMP in bmp_rw.c because a file's width, height, and BPP are not validated. NOTE: the vendor's perspective is "this main application was not intended to be a well tested program, it's just something to demonstrate it works and for the user to see how to integrate it into their own programs."

radare2 through 3.5.1 mishandles the RParse API, which allows remote attackers to cause a denial of service (application crash) or possibly have unspecified other impact, as demonstrated by newstr buffer overflows during replace operations. This affects libr/asm/asm.c and libr/parse/parse.c.

ean_leading_zeroes in backend/upcean.c in Zint Barcode Generator 2.9.1 has a stack-based buffer overflow that is reachable from the C API through an application that includes the Zint Barcode Generator library code.

Stack buffer overflow issues were found in Opensc before version 0.22.0 in various places that could potentially crash programs using the library.

NDrive(1.2.2).sys in Naver Cloud Explorer has a stack-based buffer overflow, which allows attackers to cause a denial of service when reading data from IOCTL handle.

NVIDIA Triton Inference Server for Windows and Linux contains a vulnerability where an attacker could cause memory corruption by identifying and accessing the shared memory region used by the Python backend. A successful exploit of this vulnerability might lead to denial of service.

Edraw Max 7.9.3 has Heap Corruption starting at ntdll!RtlpNtMakeTemporaryKey+0x0000000000001a77.

Alternate Pic View 2.600 has a User Mode Write AV starting at PicViewer!PerfgrapFinalize+0x00000000000a8868.

A memory corruption vulnerability exists in the Windows Server DHCP service when an attacker sends specially crafted packets to a DHCP failover server. An attacker who successfully exploited the vulnerability could cause the DHCP service to become nonresponsive. To exploit the vulnerability, an attacker could send a specially crafted packet to a DHCP server. However, the DHCP server must be set to failover mode for the attack to succeed. The security update addresses the vulnerability by correcting how DHCP failover servers handle network packets.

Tenda A18 V15.13.07.09 was discovered to contain a stack overflow via the security parameter in the formWifiBasicSet function.

The WRITE_UNALIGNED function in dwarf_elf_access.c in libdwarf before 20160923 allows remote attackers to cause a denial of service (out-of-bounds write and crash) via a crafted DWARF section.

There is a stack buffer overflow in MP4Box 1.1.0 at src/filters/dmx_nhml.c in nhmldmx_init_parsing which leads to a denial of service vulnerability.

There is a stack buffer overflow in MP4Box v1.0.1 at src/filters/dmx_nhml.c:1008 in the nhmldmx_send_sample() function szXmlFrom parameter which leads to a denial of service vulnerability.

eprosima Fast DDS is a C++ implementation of the Data Distribution Service standard of the Object Management Group. Prior to versions 2.11.1, 2.10.2, 2.9.2, and 2.6.6, heap can be overflowed by providing a PID_PROPERTY_LIST parameter that contains a CDR string with length larger than the size of actual content. In `eprosima::fastdds::dds::ParameterPropertyList_t::push_back_helper`, `memcpy` is called to first copy the octet'ized length and then to copy the data into `properties_.data`. At the second memcpy, both `data` and `size` can be controlled by anyone that sends the CDR string to the discovery multicast port. This can remotely crash any Fast-DDS process. Versions 2.11.1, 2.10.2, 2.9.2, and 2.6.6 contain a patch for this issue.

The cvtClump function in the rgb2ycbcr tool in LibTIFF 4.0.6 and earlier allows remote attackers to cause a denial of service (out-of-bounds write) by setting the "-v" option to -1.

Tenda AC21 V16.03.08.15 is vulnerable to Buffer Overflow via /bin/httpd, function: fromSetWifiGusetBasic.

When FreeImage 3.18.0 reads a tiff file, it will be handed to the Load function of the PluginTIFF.cpp file, but a memcpy occurs in which the destination address and the size of the copied data are not considered, resulting in a heap overflow.

Live555 through 1.08 does not handle socket connections properly. A huge number of incoming socket connections in a short time invokes the error-handling module, in which a heap-based buffer overflow happens. An attacker can leverage this to launch a DoS attack.

Memory corruption in Intel(R) Baseboard Management Controller firmware may allow an unauthenticated user to potentially enable denial of service via network access.

There is a stack buffer overflow in MP4Box v1.0.1 at src/filters/dmx_nhml.c:1004 in the nhmldmx_send_sample() function szXmlTo parameter which leads to a denial of service vulnerability.

When JTEKT Corporation TOYOPUC PLC versions PC10G-CPU, 2PORT-EFR, Plus CPU, Plus EX, Plus EX2, Plus EFR, Plus EFR2, Plus 2P-EFR, PC10P-DP, PC10P-DP-IO, Plus BUS-EX, Nano 10GX, Nano 2ET,PC10PE, PC10PE-16/16P, PC10E, FL/ET-T-V2H, PC10B,PC10B-P, Nano CPU, PC10P, and PC10GE receive an invalid frame, the outside area of a receive buffer for FL-net are overwritten. As a result, the PLC CPU detects a system error, and the affected products stop.

There is a heap-based buffer overflow vulnerability in the video framework. Successful exploitation of this vulnerability may affect availability.

An issue was discovered in libmatio.a in matio (aka MAT File I/O Library) 1.5.13. There is a heap-based buffer overflow problem in the function ReadNextCell() in mat5.c.

There is a heap-based and stack-based buffer overflow vulnerability in the video framework. Successful exploitation of this vulnerability may affect availability.

UltraVNC revision 1211 has a stack buffer overflow vulnerability in VNC server code inside file transfer request handler, which can result in Denial of Service (DoS). This attack appears to be exploitable via network connectivity. This vulnerability has been fixed in revision 1212.

SAP NetWeaver ABAP Server and ABAP Platform (Dispatcher), versions - KRNL32NUC - 7.22,7.22EXT, KRNL32UC - 7.22,7.22EXT, KRNL64NUC - 7.22,7.22EXT,7.49, KRNL64UC - 8.04,7.22,7.22EXT,7.49,7.53,7.73, KERNEL - 7.22,8.04,7.49,7.53,7.73,7.77,7.81,7.82,7.83, allows an unauthenticated attacker without specific knowledge of the system to send a specially crafted packet over a network which will trigger an internal error in the system due to improper input validation in method DpRTmPrepareReq() causing the system to crash and rendering it unavailable. In this attack, no data in the system can be viewed or modified.

There is an Out-of-bounds write vulnerability in the AOD module in smartphones. Successful exploitation of this vulnerability may affect service integrity.

In Wireshark 2.4.0 to 2.4.13, 2.6.0 to 2.6.7, and 3.0.0, the DOF dissector could crash. This was addressed in epan/dissectors/packet-dof.c by properly handling generated IID and OID bytes.

SAP NetWeaver AS for ABAP (RFC Gateway), versions - KRNL32NUC - 7.22,7.22EXT, KRNL64NUC - 7.22,7.22EXT,7.49, KRNL64UC - 8.04,7.22,7.22EXT,7.49,7.53,7.73, KERNEL - 7.22,8.04,7.49,7.53,7.73,7.77,7.81,7.82,7.83, allows an unauthenticated attacker without specific knowledge of the system to send a specially crafted packet over a network which will trigger an internal error in the system due to improper input validation in method ThCPIC() causing the system to crash and rendering it unavailable. In this attack, no data in the system can be viewed or modified.

The WPG plugin before 3.1.0.0 for IrfanView 4.57 has a user-mode write access violation starting at WPG+0x0000000000012ec6, which might allow remote attackers to execute arbitrary code.