OS Command Injection in upload.cgi in ASUSTOR ADM version 3.1.1 allows attackers to execute system commands by modifying the filename POST parameter.

IBM Security Guardium 11.2 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 199184.

An authenticated attacker can send a specially crafted route to the “edit_route.cgi” binary and have it execute shell commands. This vulnerability impacts products based on HID Mercury Intelligent Controllers LP1501, LP1502, LP2500, LP4502, and EP4502 which contain firmware versions prior to 1.303 for the LP series and 1.297 for the EP series. An attacker with this level of access on the device can monitor all communications sent to and from this device, modify onboard relays, change configuration files, or cause the device to become unstable.

mailcow before 2022-05d allows a remote authenticated user to inject OS commands and escalate privileges to domain admin via the --debug option in conjunction with the ---PIPEMESS option in Sync Jobs.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in the web-based management interface of certain Cisco Small Business 100, 300, and 500 Series Wireless Access Points could allow an authenticated, remote attacker to obtain sensitive information from or inject arbitrary commands on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

The Symantec Reporter CLI 10.1 prior to 10.1.5.6 and 10.2 prior to 10.2.1.8 is susceptible to an OS command injection vulnerability. An authenticated malicious administrator with Enable mode access can execute arbitrary OS commands with elevated system privileges.

System command injection vulnerability in wifi_access in Xiaomi Mi Router 3 version 2.22.15 allows attackers to execute system commands via the "timeout" URL parameter.

OS command injection in user.cgi in ASUSTOR ADM version 3.1.1 allows attackers to execute system commands as root via the "name" POST parameter.

An OS command injection vulnerability in the web administration component of Micro Focus Secure Messaging Gateway (SMG) allows a remote attacker authenticated as a privileged user to execute arbitrary OS commands on the SMG server. This can be exploited in conjunction with CVE-2018-12464 to achieve unauthenticated remote code execution. Affects Micro Focus Secure Messaging Gateway versions prior to 471. It does not affect previous versions of the product that used GWAVA product name (i.e. GWAVA 6.5).

OS command injection in group.cgi in ASUSTOR ADM version 3.1.1 allows attackers to execute system commands as root by modifying the "name" POST parameter.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.

Multiple vulnerabilities in Cisco DNA Spaces Connector could allow an authenticated, remote attacker to perform a command injection attack on an affected device. These vulnerabilities are due to insufficient input sanitization when executing affected commands. A high-privileged attacker could exploit these vulnerabilities on a Cisco DNA Spaces Connector by injecting crafted input during command execution. A successful exploit could allow the attacker to execute arbitrary commands as root within the Connector docker container.

A vulnerability in the Command Runner tool of Cisco DNA Center could allow an authenticated, remote attacker to perform a command injection attack. The vulnerability is due to insufficient input validation by the Command Runner tool. An attacker could exploit this vulnerability by providing crafted input during command execution or via a crafted command runner API call. A successful exploit could allow the attacker to execute arbitrary CLI commands on devices managed by Cisco DNA Center.

Dell EMC Unity Operating Environment (OE) versions prior to 4.3.0.1522077968 are affected by multiple OS command injection vulnerabilities. A remote application admin user could potentially exploit the vulnerabilities to execute arbitrary OS commands as system root on the system where Dell EMC Unity is installed.

Tenda Technology Co.,Ltd HG6 3.3.0-210926 was discovered to contain a command injection vulnerability via the pingAddr and traceAddr parameters. This vulnerability is exploited via a crafted POST request.

Ubiquiti Networks EdgeSwitch version 1.7.3 and prior suffer from an improperly neutralized element in an OS command due to lack of protection on the admin CLI, leading to code execution and privilege escalation greater than administrators themselves are allowed. An attacker with access to an admin account could escape the restricted CLI and execute arbitrary shell instructions.

OS command injection in user.cgi in ASUSTOR ADM version 3.1.1 allows attackers to execute system commands as root via the "secret_key" URL parameter.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple command injection vulnerabilities exist in the web_server ajax endpoints functionalities of Robustel R1510 3.3.0. A specially-crafted network packets can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger these vulnerabilities.The `/ajax/config_rollback/` API is affected by a command injection vulnerability.

OCS Inventory 2.4.1 is prone to a remote command-execution vulnerability. Specifically, this issue occurs because the content of the ipdiscover_analyser rzo GET parameter is concatenated to a string used in an exec() call in the PHP code. Authentication is needed in order to exploit this vulnerability.

An OS command injection vulnerability exists in the sysupgrade command injection functionality of Robustel R1510 3.1.16 and 3.3.0. A specially-crafted network request can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger this vulnerability.

A vulnerability in the web-based management interface of Cisco Prime Infrastructure and Evolved Programmable Network (EPN) Manager could allow an authenticated, remote attacker to execute arbitrary commands on an affected system. The vulnerability is due to insufficient validation of user-supplied input to the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to the interface. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system (OS) with the permissions of a special non-root user. In this way, an attacker could take control of the affected system, which would allow them to obtain and alter sensitive data. The attacker could also affect the devices that are managed by the affected system by pushing arbitrary configuration files, retrieving device credentials and confidential information, and ultimately undermining the stability of the devices, causing a denial of service (DoS) condition.

Multiple vulnerabilities in Cisco DNA Spaces Connector could allow an authenticated, remote attacker to perform a command injection attack on an affected device. These vulnerabilities are due to insufficient input sanitization when executing affected commands. A high-privileged attacker could exploit these vulnerabilities on a Cisco DNA Spaces Connector by injecting crafted input during command execution. A successful exploit could allow the attacker to execute arbitrary commands as root within the Connector docker container.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.

An issue was discovered on D-Link DWR-116 through 1.06, DWR-512 through 2.02, DWR-712 through 2.02, DWR-912 through 2.02, DWR-921 through 2.02, and DWR-111 through 1.01 devices. An authenticated attacker may execute arbitrary code by injecting the shell command into the chkisg.htm page Sip parameter. This allows for full control over the device internals.

A remote authenticated command Injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): Prior to 6.9.5, 6.8.8-HF1, 6.7.14-HF1. A vulnerability in the ClearPass CLI could allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

On D-Link DIR-550A and DIR-604M devices through v2.10KR, a malicious user can forge an HTTP request to inject operating system commands that can be executed on the device with higher privileges, aka remote code execution.

All Phoenix Contact managed FL SWITCH 3xxx, 4xxx, 48xx products running firmware version 1.0 to 1.33 are prone to OS command injection.

Quest DR Series Disk Backup software version before 4.0.3.1 allows privilege escalation (issue 1 of 6).

The '/common/ajax_email_connection_test.php' script in the Quest KACE System Management Appliance 8.0.318 is accessible by any authenticated user and can be abused to execute arbitrary commands on the system. This script is vulnerable to command injection via the unsanitized user input 'TEST_SERVER' sent to the script via the POST method.

In order to perform actions that require higher privileges, the Quest KACE System Management Appliance 8.0.318 relies on a message queue that runs daemonized with root privileges and only allows a set of commands to be executed. A command injection vulnerability exists within this message queue which allows low-privilege users to append arbitrary commands that will be run as root.

NetGain Enterprise Manager (EM) is affected by OS Command Injection vulnerabilities in versions before 10.0.57. These vulnerabilities could allow remote authenticated attackers to inject arbitrary code, resulting in remote code execution.

NETGEAR R8500 1.0.2.158 devices allow remote authenticated users to execute arbitrary commands (such as telnetd) via shell metacharacters in the sysNewPasswd and sysConfirmPasswd parameters to password.cgi.

A command injection remote command execution vulnerability in Trend Micro Email Encryption Gateway 5.5 could allow a remote attacker to execute arbitrary code on vulnerable installations due to a flaw in the LauncherServer. Authentication is required to exploit this vulnerability.

NETGEAR R8500 1.0.2.158 devices allow remote authenticated users to execute arbitrary commands (such as telnetd) via shell metacharacters in the ipv6_fix.cgi ipv6_wan_ipaddr, ipv6_lan_ipaddr, ipv6_wan_length, or ipv6_lan_length parameter.

An OS Command Injection vulnerability in the configuration parser of Eve-NG Professional through 4.0.1-65 and Eve-NG Community through 2.0.3-112 allows a remote authenticated attacker to execute commands as root by editing virtualization command parameters of imported UNL files.

OpenEMR version 5.0.0 contains a OS Command Injection vulnerability in fax_dispatch.php that can result in OS command injection by an authenticated attacker with any role. This vulnerability appears to have been fixed in 5.0.0 Patch 2 or higher.

Privilege escalation of an authenticated user to root in Citrix SD-WAN center versions before 11.2.2, 11.1.2b and 10.2.8.

Ruckus ZoneFlex R500 104.0.0.0.1347 devices allow an authenticated attacker to execute arbitrary OS commands via the hidden /forms/nslookupHandler form, as demonstrated by the nslookuptarget=|cat${IFS} substring.

functions_netflow.php in Artica Pandora FMS 7.0 allows remote attackers to execute arbitrary OS commands via shell metacharacters in the index.php?operation/netflow/nf_live_view ip_dst, dst_port, or src_port parameter, a different vulnerability than CVE-2019-20224.

Netis WF2471 v1.2.30142 devices allow an authenticated attacker to execute arbitrary OS commands via shell metacharacters in the /cgi-bin-igd/sys_log_clean.cgi log_3g_type parameter.

Unibox U-50 2.4 and UniBox Enterprise Series 2.4 and UniBox Campus Series 2.4 contain a OS command injection vulnerability in /tools/ping, which can leads to complete device takeover.

PHOENIX CONTACT TC ROUTER 3002T-4G through 2.05.3, TC ROUTER 2002T-3G through 2.05.3, TC ROUTER 3002T-4G VZW through 2.05.3, TC ROUTER 3002T-4G ATT through 2.05.3, TC CLOUD CLIENT 1002-4G through 2.03.17, and TC CLOUD CLIENT 1002-TXTX through 1.03.17 devices allow authenticated users to inject system commands through a modified POST request to a specific URL.

A vulnerability in the CronJob scheduler API of Cisco Digital Network Architecture (DNA) Center could allow an authenticated, remote attacker to perform a command injection attack. The vulnerability is due to incorrect input validation of user-supplied data. An attacker could exploit this vulnerability by sending a malicious packet. A successful exploit could allow the attacker to execute arbitrary commands with root privileges. Cisco Bug IDs: CSCvi42263.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Moxa MGate 5105-MB-EIP firmware version 4.1. Authentication is required to exploit this vulnerability. The specific flaw exists within the DestIP parameter within MainPing.asp. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9552.