A vulnerability classified as critical was found in Overtek OT-E801G OTE801G65.1.1.0. This vulnerability affects unknown code of the file /diag_ping.cmd?action=test&interface=ppp0.1&ipaddr=8.8.8.8%26%26cat%20/etc/passwd&ipversion=4&sessionKey=test. The manipulation leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been discovered in Privileged Remote Access (PRA) and Remote Support (RS) which can allow an attacker with existing administrative privileges to inject commands and run as a site user.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.

A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to execute arbitrary code with root privileges on the underlying operating system of an affected device. The vulnerability exists because the affected software improperly sanitizes values that are parsed from a specific configuration file. An attacker could exploit this vulnerability by tampering with a specific configuration file and then sending an API call. A successful exploit could allow the attacker to inject arbitrary code that would be executed on the underlying operating system of the affected device. To exploit this vulnerability, the attacker would need to have a privileged set of credentials to the device.

Multiple command injection vulnerabilities in NeDi before 1.7Cp3 allow authenticated users to execute code on the server side via the flt parameter to Nodes-Traffic.php, the dv parameter to Devices-Graph.php, or the tit parameter to drawmap.php.

Certain models of routers from Billion Electric has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject arbitrary system commands into a specific SSH function and execute them on the device.

A vulnerability was found in WeiYe-Jing datax-web 2.1.1. It has been classified as critical. This affects an unknown part of the file /api/job/add/. The manipulation of the argument glueSource leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

Main_Analysis_Content.asp in ASUS DSL-N12E_C1 1.1.2.3_345 is prone to Authenticated Remote Command Execution, which allows a remote attacker to execute arbitrary OS commands via service parameters, such as shell metacharacters in the destIP parameter of a cmdMethod=ping request.

A post-authentication command injection vulnerability in the "ZyEE" function of the Zyxel EX5601-T1 firmware version V5.70(ACDZ.3.6)C0 and earlier could allow an authenticated attacker with administrator privileges to execute operating system (OS) commands on a vulnerable device.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in the web-based management interface of certain Cisco Small Business 100, 300, and 500 Series Wireless Access Points could allow an authenticated, remote attacker to obtain sensitive information from or inject arbitrary commands on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A post-authentication command injection vulnerability in the ”zyUtilMailSend” function of the Zyxel AX7501-B1 firmware version V5.17(ABPC.5.3)C0 and earlier could allow an authenticated attacker with administrator privileges to execute operating system (OS) commands on a vulnerable device.

IDExpert from CHANGING Information Technology does not properly validate a specific parameter in the administrator interface, allowing remote attackers with administrative privileges to inject and execute OS commands on the server.

TP-Link TL-WA850RE Wi-Fi Range Extender with hardware version 5 allows remote authenticated users to execute arbitrary commands via shell metacharacters in the wps_setup_pin parameter to /data/wps.setup.json.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.

Command injection in Ivanti Connect Secure before version 22.7R2.1 (Not Applicable to 9.1Rx) and Ivanti Policy Secure before version 22.7R1.1 (Not Applicable to 9.1Rx) allows a remote authenticated attacker with admin privileges to achieve remote code execution.

Multiple vulnerabilities in Cisco DNA Spaces Connector could allow an authenticated, remote attacker to perform a command injection attack on an affected device. These vulnerabilities are due to insufficient input sanitization when executing affected commands. A high-privileged attacker could exploit these vulnerabilities on a Cisco DNA Spaces Connector by injecting crafted input during command execution. A successful exploit could allow the attacker to execute arbitrary commands as root within the Connector docker container.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.

A vulnerability has been found in didi Super-Jacoco 1.0 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /cov/triggerUnitCover. The manipulation of the argument uuid leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.

A post-authentication command injection vulnerability in the "DNSServer” parameter of the diagnostic function in the Zyxel VMG8825-T50K firmware version V5.50(ABOM.8.5)C0 and earlier could allow an authenticated attacker with administrator privileges to execute operating system (OS) commands on a vulnerable device.

OS command injection occurring in versions of OpenEMR before 5.0.1.4 allows a remote authenticated attacker to execute arbitrary commands by making a crafted request to interface/main/daemon_frame.php after modifying the "hylafax_server" global variable in interface/super/edit_globals.php.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.

Command injection in Ivanti Connect Secure before version 22.7R2.1 (Not Applicable to 9.1Rx) and Ivanti Policy Secure before version 22.7R1.1 (Not Applicable to 9.1Rx) allows a remote authenticated attacker with admin privileges to achieve remote code execution.

Command injection in Ivanti Connect Secure before version 22.7R2.1 (Not Applicable to 9.1Rx) and Ivanti Policy Secure before version 22.7R1.1 (Not Applicable to 9.1Rx) allows a remote authenticated attacker with admin privileges to achieve remote code execution.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through the specific web page.

baserCMS 3.0.2 through 3.0.8 allows remote authenticated users to execute arbitrary OS commands via unspecified vectors.

OS command injection occurring in versions of OpenEMR before 5.0.1.4 allows a remote authenticated attacker to execute arbitrary commands by making a crafted request to interface/fax/fax_dispatch.php after modifying the "hylafax_enscript" global variable in interface/super/edit_globals.php.

A vulnerability was found in D-Link DI-8003 16.07.16A1. It has been classified as critical. Affected is the function upgrade_filter_asp of the file /upgrade_filter.asp. The manipulation of the argument path leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Improper input sanitization within the restricted administration shell on UCOPIA Wireless Appliance devices using firmware version 5.1.x before 5.1.13 allows authenticated remote attackers to escape the shell and escalate their privileges by adding a LocalCommand to the SSH configuration file in the user home folder.

Nagios XI 5.5.6 allows remote authenticated attackers to reset and regenerate the API key of more privileged users. The attacker can then use the new API key to execute API calls at elevated privileges.

OS command injection occurring in versions of OpenEMR before 5.0.1.4 allows a remote authenticated attacker to execute arbitrary commands by making a crafted request to interface/billing/sl_eob_search.php after modifying the "print_command" global variable in interface/super/edit_globals.php.

System command injection in User.create method in Buffalo TS5600D1206 version 3.61-0.10 allows attackers to execute system commands via the "name" parameter.

functions_netflow.php in Artica Pandora FMS 7.0 allows remote attackers to execute arbitrary OS commands via shell metacharacters in the index.php?operation/netflow/nf_live_view ip_dst, dst_port, or src_port parameter, a different vulnerability than CVE-2019-20224.

Pi-hole Web v4.3.2 (aka AdminLTE) allows Remote Code Execution by privileged dashboard users via a crafted DHCP static lease.

Guangzhou 1GE ONU V2801RW 1.9.1-181203 through 2.9.0-181024 and V2804RGW 1.9.1-181203 through 2.9.0-181024 devices allow remote attackers to execute arbitrary OS commands via shell metacharacters in the boaform/admin/formPing Dest IP Address field.

An exploitable operating system command injection exists in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04). Specially crafted entries to network configuration information can cause execution of arbitrary system commands, resulting in full control of the device. An attacker can send an authenticated HTTP request to trigger this vulnerability. Data entered into the 'Domain Name' input field through the web portal is submitted to apply.cgi as the value to the 'wan_domain' POST parameter. The wan_domain data goes through the nvram_set process described above. When the 'preinit' binary receives the SIGHUP signal it enters a code path that calls a function named 'set_host_domain_name' from its libshared.so shared object.

A vulnerability in Trend Micro InterScan Web Security Virtual Appliance 6.5 may allow remote attackers to execute arbitrary code on affected installations. Authentication is required to exploit this vulnerability.

Ruckus ZoneFlex R500 104.0.0.0.1347 devices allow an authenticated attacker to execute arbitrary OS commands via the hidden /forms/nslookupHandler form, as demonstrated by the nslookuptarget=|cat${IFS} substring.

A vulnerability was found in TRENDnet TEW-800MB 1.0.1.0 and classified as critical. Affected by this issue is some unknown functionality of the component POST Request Handler. The manipulation of the argument DeviceURL leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-252122 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Sage X3 System CHAINE Variable Script Command Injection. An authenticated user with developer access can pass OS commands via this variable used by the web application. Note, this developer configuration should not be deployed in production.

This affects the package systeminformation before 4.27.11. This package is vulnerable to Command Injection. The attacker can concatenate curl's parameters to overwrite Javascript files and then execute any OS commands.

MultiTech Conduit MTCDT-LVW2-24XX 1.4.17-ocea-13592 devices allow remote authenticated administrators to execute arbitrary OS commands by navigating to the Debug Options page and entering shell metacharacters in the interface JSON field of the ping function.

The package ng-packagr before 10.1.1 are vulnerable to Command Injection via the styleIncludePaths option.

Comtech Stampede FX-1010 7.4.3 devices allow remote authenticated administrators to achieve remote code execution by navigating to the Diagnostics Trace Route page and entering shell metacharacters in the Target IP address field. (In some cases, authentication can be achieved with the comtech password for the comtech account.)

codecov-node npm module before 3.6.5 allows remote attackers to execute arbitrary commands.The value provided as part of the gcov-root argument is executed by the exec function within lib/codecov.js. This vulnerability exists due to an incomplete fix of CVE-2020-7596.

Comtech Stampede FX-1010 7.4.3 devices allow remote authenticated administrators to achieve remote code execution by navigating to the Poll Routes page and entering shell metacharacters in the Router IP Address field. (In some cases, authentication can be achieved with the comtech password for the comtech account.)