A vulnerability has been identified in SCALANCE M875 (All versions). An authenticated remote attacker with access to the web interface (443/tcp), could execute arbitrary operating system commands. Successful exploitation requires that the attacker has network access to the web interface. The attacker must be authenticated as administrative user to exploit the security vulnerability. The vulnerability could allow an attacker to execute arbitrary code on the device. At the time of advisory publication no public exploitation of this security vulnerability was known.

An exploitable command injection vulnerability exists in the ACEManager iplogging.cgi functionality of Sierra Wireless AirLink ES450 FW 4.9.3. A specially crafted HTTP request can inject arbitrary commands, resulting in arbitrary command execution. An attacker can send an authenticated HTTP request to trigger this vulnerability.

An exploitable operating system command injection exists in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04). Specially crafted entries to network configuration information can cause execution of arbitrary system commands, resulting in full control of the device. An attacker can send an authenticated HTTP request to trigger this vulnerability. Data entered into the 'Domain Name' input field through the web portal is submitted to apply.cgi as the value to the 'wan_domain' POST parameter. The wan_domain data goes through the nvram_set process described above. When the 'preinit' binary receives the SIGHUP signal it enters a code path that calls a function named 'set_host_domain_name' from its libshared.so shared object.

Devices in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04) are susceptible to OS command injection vulnerabilities due to improper filtering of data passed to and retrieved from NVRAMData entered into the 'Router Name' input field through the web portal is submitted to apply.cgi as the value to the 'machine_name' POST parameter. When the 'preinit' binary receives the SIGHUP signal it enters a code path that calls a function named 'set_host_domain_name' from its libshared.so shared object.

iBall iB-WRA150N 1.2.6 build 110401 Rel.47776n devices allow remote authenticated users to execute arbitrary OS commands via shell metacharacters in the ping test arguments on the Diagnostics page.

A vulnerability, which was classified as critical, has been found in Wifi-soft UniBox Controller up to 20250506. Affected by this issue is some unknown functionality of the file /billing/test_accesscodelogin.php. The manipulation of the argument Password leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical was found in Wifi-soft UniBox Controller up to 20250506. Affected by this vulnerability is an unknown functionality of the file /authentication/logout.php. The manipulation of the argument mac_address leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A remote arbitrary command execution vulnerability was discovered in Aruba ClearPass Policy Manager version(s): Prior to 6.10.0, 6.9.6 and 6.8.9. Aruba has released updates to ClearPass Policy Manager that address this security vulnerability.

A vulnerability, which was classified as critical, was found in Wifi-soft UniBox Controller up to 20250506. This affects an unknown part of the file /billing/pms_check.php. The manipulation of the argument ipaddress leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Jenkins 2.73.1 and earlier, 2.83 and earlier users with permission to create or configure agents in Jenkins could configure a launch method called 'Launch agent via execution of command on master'. This allowed them to run arbitrary shell commands on the master node whenever the agent was supposed to be launched. Configuration of this launch method now requires the Run Scripts permission typically only granted to administrators.

IBM BigFix Platform 9.0, 9.1 before 9.1.8, and 9.2 before 9.2.8 allow remote authenticated users to execute arbitrary commands by leveraging report server access. IBM X-Force ID: 111302.

www/soap/application/MCSoap/Logs.php in MailCleaner Community Edition 2018.08 allows remote attackers to execute arbitrary OS commands.

A vulnerability has been identified in SCALANCE M875 (All versions). An authenticated remote attacker with access to the web interface (443/tcp), could execute arbitrary operating system commands. Successful exploitation requires that the attacker has network access to the web interface. The attacker must be authenticated as administrative user to exploit the security vulnerability. The vulnerability could allow an attacker to execute arbitrary code on the device. At the time of advisory publication no public exploitation of this security vulnerability was known.

In RUCKUS SmartZone (SZ) before 6.1.2p3 Refresh Build, OS command injection can occur via an IP address field provided by an authenticated user.

Softaculous Webuzo contains a command injection in the password reset functionality. A remote, authenticated attacker can exploit this vulnerability to gain code execution on the system.

Devices in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04) are susceptible to OS command injection vulnerabilities due to improper filtering of data passed to and retrieved from NVRAM. Data entered into the 'Router Name' input field through the web portal is submitted to apply.cgi as the value to the 'machine_name' POST parameter. When the 'preinit' binary receives the SIGHUP signal, it enters a code path that continues until it reaches offset 0x0042B5C4 in the 'start_lltd' function. Within the 'start_lltd' function, a 'nvram_get' call is used to obtain the value of the user-controlled 'machine_name' NVRAM entry. This value is then entered directly into a command intended to write the host name to a file and subsequently executed.

A improper neutralization of special elements used in a command ('command injection') in Fortinet FortiExtender version 7.0.1 and below, 4.2.3 and below, 4.1.7 and below allows an authenticated attacker to execute privileged shell commands via CLI commands including special characters

A vulnerability in the web-based management interface of Cisco Intersight Virtual Appliance could allow an authenticated, remote attacker to perform a command injection attack on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by using the web-based management interface to execute a command using crafted input. A successful exploit could allow the attacker to execute arbitrary commands using root-level privileges on an affected device.

An issue was discovered on Foscam C2 devices with System Firmware 1.11.1.8 and Application Firmware 2.72.1.32, and Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. They allow attackers to execute arbitrary OS commands via shell metacharacters in the modelName, by leveraging /mnt/mtd/app/config/ProductConfig.xml write access.

pphoto in Ariadne before 2.6 allows remote authenticated users with certain privileges to execute arbitrary shell commands via vectors related to PINP programs and the annotate command. NOTE: some of these details are obtained from third party information.

TRENDnet TEW-673GRU v1.00b40 devices have an OS command injection vulnerability in the start_arpping function of the timer binary, which allows remote attackers to execute arbitrary commands via three parameters (dhcpd_start, dhcpd_end, and lan_ipaddr) passed to the apply.cgi binary through a POST request.

An issue was discovered on Foscam C2 devices with System Firmware 1.11.1.8 and Application Firmware 2.72.1.32, and Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. They allow remote attackers to execute arbitrary OS commands via shell metacharacters in the usrName parameter of a CGIProxy.fcgi addAccount action.

An issue was discovered in MISP 2.4.9x before 2.4.99. In app/Model/Event.php (the STIX 1 import code), an unescaped filename string is used to construct a shell command. This vulnerability can be abused by a malicious authenticated user to execute arbitrary commands by tweaking the original filename of the STIX import.

An issue was discovered on D-Link DSL-3782 devices with firmware 1.01. An OS command injection vulnerability in Acl.asp allows a remote authenticated attacker to execute arbitrary OS commands via the ScrIPaddrEndTXT parameter.

A sandbox escape issue was discovered in VyOS 1.1.8. It provides a restricted management shell for operator users to administer the device. By issuing various shell special characters with certain commands, an authenticated operator user can break out of the management shell and gain access to the underlying Linux shell. The user can then run arbitrary operating system commands with the privileges afforded by their account.

A command injection vulnerability in the web server functionality of Moxa EDR-810 V4.2 build 18041013 allows remote attackers to execute arbitrary OS commands with root privilege via the caname parameter to the /xml/net_WebCADELETEGetValue URI.

GitHub Actions Runner is the application that runs a job from a GitHub Actions workflow. The actions runner invokes the docker cli directly in order to run job containers, service containers, or container actions. A bug in the logic for how the environment is encoded into these docker commands was discovered in versions prior to 2.296.2, 2.293.1, 2.289.4, 2.285.2, and 2.283.4 that allows an input to escape the environment variable and modify that docker command invocation directly. Jobs that use container actions, job containers, or service containers alongside untrusted user inputs in environment variables may be vulnerable. The Actions Runner has been patched, both on `github.com` and hotfixes for GHES and GHAE customers in versions 2.296.2, 2.293.1, 2.289.4, 2.285.2, and 2.283.4. GHES and GHAE customers may want to patch their instance in order to have their runners automatically upgrade to these new runner versions. As a workaround, users may consider removing any container actions, job containers, or service containers from their jobs until they are able to upgrade their runner versions.

The network diagnostic function (ping) in the Yeahlink Ultra-elegant IP Phone SIP-T41P (firmware 66.83.0.35) allows a remote authenticated attacker to trigger OS commands or open a reverse shell via command injection.

Aterm WF1200CR and Aterm WG1200CR (Aterm WF1200CR firmware Ver1.1.1 and earlier, Aterm WG1200CR firmware Ver1.0.1 and earlier) allows authenticated attackers to execute arbitrary OS commands via unspecified vectors.

fileshare.cmd on Telus Actiontec T2200H T2200H-31.128L.03 devices allows OS Command Injection via shell metacharacters in the smbdUserid or smbdPasswd field.

A shell escape vulnerability in /webconsole/Controller in Admin Portal of Sophos XG firewall 17.0.8 MR-8 allow remote authenticated attackers to execute arbitrary OS commands via shell metacharacters in the "dbName" POST parameter.

NUUO NVRMini2 version 3.9.1 is vulnerable to authenticated remote command injection. An attacker can send crafted requests to upgrade_handle.php to execute OS commands as root.

The Plainview Activity Monitor plugin before 20180826 for WordPress is vulnerable to OS command injection via shell metacharacters in the ip parameter of a wp-admin/admin.php?page=plainview_activity_monitor&tab=activity_tools request.

System command injection in request_mitv in Xiaomi Mi Router 3 version 2.22.15 allows attackers to execute arbitrary system commands via the "payload" URL parameter.

A vulnerability has been identified in SINEC NMS (All versions < V1.0 SP2). The affected application incorrectly neutralizes special elements when creating batch operations which could lead to command injection. An authenticated remote attacker with administrative privileges could exploit this vulnerability to execute arbitrary code on the system with system privileges.

The files_antivirus component before 1.0.0 for ownCloud allows OS Command Injection via the administration settings.

In Weidmueller Industrial WLAN devices in multiple versions an exploitable command injection vulnerability exists in encrypted diagnostic script functionality of the devices. A specially crafted diagnostic script file can cause arbitrary busybox commands to be executed, resulting in remote control over the device. An attacker can send diagnostic while authenticated as a low privilege user to trigger this vulnerability.

Zen Cart 1.5.7b allows admins to execute arbitrary OS commands by inspecting an HTML radio input element (within the modules edit page) and inserting a command.

EyesOfNetwork eonweb through 5.3-11 allows Remote Command Execution (by authenticated users) via shell metacharacters in the nagios_path parameter to lilac/export.php, as demonstrated by %26%26+curl to insert an "&& curl" substring for the shell.

A system command injection vulnerability in zyshclient in ZyXEL NSA325 V2 version 4.81 allows attackers to execute system commands via the web application API.

Multiple vulnerabilities exist in RaspAP 2.3 to 2.6.5 in the "interface", "ssid" and "wpa_passphrase" POST parameters in /hostapd, when the parameter values contain special characters such as ";" or "$()" which enables an authenticated attacker to execute arbitrary OS commands.

Gerapy is a distributed crawler management framework. Prior to version 0.9.9, an authenticated user could execute arbitrary commands. This issue is fixed in version 0.9.9. There are no known workarounds.

In Weidmueller Industrial WLAN devices in multiple versions an exploitable command injection vulnerability exists in the iw_webs functionality. A specially crafted diagnostic script file name can cause user input to be reflected in a subsequent iw_system call, resulting in remote control over the device. An attacker can send commands while authenticated as a low privilege user to trigger this vulnerability.

In Weidmueller Industrial WLAN devices in multiple versions an exploitable command injection vulnerability exists in the hostname functionality. A specially crafted entry to network configuration information can cause execution of arbitrary system commands, resulting in full control of the device. An attacker can send various requests while authenticated as a high privilege user to trigger this vulnerability.

Pydio 4.2.1 through 8.2.1 has an authenticated remote code execution vulnerability in which an attacker with administrator access to the web application can execute arbitrary code on the underlying system via Command Injection.

A vulnerability has been identified in SCALANCE LPE9403 (All versions < V2.1). The web based management of affected device does not properly validate user input, making it susceptible to command injection. This could allow an authenticated remote attacker to access the underlying operating system as the root user.

Improper sanitization of dynamic user expressions in Odoo Community 11.0 and earlier and Odoo Enterprise 11.0 and earlier allows authenticated privileged users to escape from the dynamic expression sandbox and execute arbitrary code on the hosting system.

MyQ Server in MyQ X Smart before 8.2 allows remote code execution by unprivileged users because administrative session data can be read in the %PROGRAMFILES%\MyQ\PHP\Sessions directory. The "Select server file" feature is only intended for administrators but actually does not require authorization. An attacker can inject arbitrary OS commands (such as commands to create new .php files) via the Task Scheduler component.

A command injection vulnerability in MVISION EDR (MVEDR) prior to 3.4.0 allows an authenticated MVEDR administrator to trigger the EDR client to execute arbitrary commands through PowerShell using the EDR functionality 'execute reaction'.

An issue was discovered in /bin/boa on D-Link DIR-619L Rev.B 2.06B1 and DIR-605L Rev.B 2.12B1 devices. goform/formSysCmd allows remote authenticated users to execute arbitrary OS commands via the sysCmd POST parameter.