Nozomi Networks Labs identified a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') in the Console WebUI in Waterfall WF-500 TX and RX Hosts in version 7.9.1.0 R2502171040 that allows remote unauthenticated attackers to execute arbitrary operating system commands on the device.

An unauthenticated remote attacker can perform a command injection via Modbus-TCP or Modbus-RTU to gain read and write access on the affected device.

An issue was discovered in ONAP SDNC before Dublin. By executing sla/upload with a crafted filename parameter, an unauthenticated attacker can execute an arbitrary command. All SDC setups that include admportal are affected.

Nozomi Networks Labs identified a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') in the Console WebUI in Waterfall WF-500 TX and RX Hosts in version 7.9.1.0 R2502171040 that allows remote unauthenticated attackers to execute arbitrary operating system commands on the device.

An issue was discovered on TRENDnet TEW-651BR 2.04B1, TEW-652BRP 3.04b01, and TEW-652BRU 1.00b12 devices. OS command injection occurs through the get_set.ccp lanHostCfg_HostName_1.1.1.0.0 parameter.

An issue was discovered in ONAP SDNC before Dublin. By executing sla/dgUpload with a crafted filename parameter, an unauthenticated attacker can execute an arbitrary command. All SDC setups that include admportal are affected.

An issue was discovered in Motorola CX2 1.01 and M2 1.01. There is a command injection in the function startRmtAssist in hnap, which leads to remote code execution via shell metacharacters in a JSON value.

TRENDnet TEW755AP 1.13B01 was discovered to contain a command injection vulnerability via the wps_sta_enrollee_pin parameter in the action set_sta_enrollee_pin_5g function.

In aws-lambda versions prior to version 1.0.5, the "config.FunctioName" is used to construct the argument used within the "exec" function without any sanitization. It is possible for a user to inject arbitrary commands to the "zipCmd" used within "config.FunctionName".

php-shellcommand versions before 1.6.1 have a command injection vulnerability. Successful exploitation could lead to arbitrary code execution.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of CentOS Web Panel cwp-e17.0.9.8.923. Authentication is not required to exploit this vulnerability. The specific flaw exists within ajax_migration_cpanel.php. When parsing the filespace parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9743.

The SUNNET WMPro v5.0 and v5.1 for eLearning system has OS Command Injection via "/teach/course/doajaxfileupload.php". The target server can be exploited without authentication.

All versions of curling.js are vulnerable to Command Injection via the run function. The command argument can be controlled by users without any sanitization.

network-manager through 1.0.2 allows remote attackers to execute arbitrary commands via the "execSync()" argument.

APKLeaks is an open-source project for scanning APK file for URIs, endpoints & secrets. APKLeaks prior to v2.0.3 allows remote attackers to execute arbitrary OS commands via package name inside application manifest. An attacker could include arguments that allow unintended commands or code to be executed, allow sensitive data to be read or modified or could cause other unintended behavior through malicious package name. The problem is fixed in version v2.0.6-dev and above.

devcert-sanscache before 0.4.7 allows remote attackers to execute arbitrary code or cause a Command Injection via the exec function. The variable `commonName` controlled by user input is used as part of the `exec` function without any sanitization.

Remote Command Execution (RCE) vulnerability exists in HNAP1/control/SetWizardConfig.php in D-Link Router DIR-846 DIR846A1_FW100A43.bin and DIR846enFW100A53DLA-Retail.bin. Malicoius users can use this vulnerability to use "\ " or backticks in the shell metacharacters in the ssid0 or ssid1 parameters to cause arbitrary command execution. Since CVE-2019-17510 vulnerability has not been patched and improved www/hnap1/control/setwizardconfig.php, can also use line breaks and backquotes to bypass.

rpi through 0.0.3 allows execution of arbritary commands. The variable pinNumbver in function GPIO within src/lib/gpio.js is used as part of the arguement of exec function without any sanitization.

SolarView Compact SV-CPT-MC310 prior to Ver.6.5 allows an attacker to execute arbitrary OS commands with the web server privilege via unspecified vectors.

push-dir through 0.4.1 allows execution of arbritary commands. Arguments provided as part of the variable "opt.branch" is not validated before being provided to the "git" command within "index.js#L139". This could be abused by an attacker to inject arbitrary commands.

An issue was discovered in Eveo URVE Web Manager 27.02.2025. The application exposes a /_internal/pc/vpro.php localhost endpoint to unauthenticated users that is vulnerable to OS Command Injection. The endpoint takes an input parameter that is passed directly into the shell_exec() function of PHP. NOTE: this can be chained with CVE-2025-36845.

Aterm WG2600HS firmware Ver1.5.1 and earlier allows an attacker to execute arbitrary OS commands via unspecified vectors.

im-resize through 2.3.2 allows remote attackers to execute arbitrary commands via the "exec" argument. The cmd argument used within index.js, can be controlled by user without any sanitization.

In "index.js" file line 240, the run command executes the git command with a user controlled variable called remoteUrl. This affects git-diff-apply all versions prior to 0.22.2.

A vulnerability, which was classified as critical, has been found in SourceCodester Web-based Pharmacy Product Management System 1.0. This issue affects some unknown processing of the file backup.php of the component Database Backup Handler. The manipulation of the argument txtdbname leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

The web interface in git (gitweb) 1.5.x before 1.5.5 allows remote attackers to execute arbitrary commands via shell metacharacters related to git_search.

enpeem through 2.2.0 allows execution of arbitrary commands. The "options.dir" argument is provided to the "exec" function without any sanitization.

Grandstream GAC2500 1.0.3.35, GXP2200 1.0.3.27, GVC3202 1.0.3.51, GXV3275 before 1.0.3.219 Beta, and GXV3240 before 1.0.3.219 Beta devices allow unauthenticated remote code execution via shell metacharacters in a /manager?action=getlogcat priority field, in conjunction with a buffer overflow (via the phonecookie cookie) to overwrite a data structure and consequently bypass authentication. This can be exploited remotely or via CSRF because the cookie can be placed in an Accept HTTP header in an XMLHttpRequest call to lighttpd.

serial-number through 1.3.0 allows execution of arbritary commands. The "cmdPrefix" argument in serialNumber function is used by the "exec" function without any validation.

A vulnerability was found in docconv up to 1.2.0. It has been declared as critical. This vulnerability affects the function ConvertPDFImages of the file pdf_ocr.go. The manipulation of the argument path leads to os command injection. The attack can be initiated remotely. Upgrading to version 1.2.1 is able to address this issue. The name of the patch is b19021ade3d0b71c89d35cb00eb9e589a121faa5. It is recommended to upgrade the affected component. VDB-216502 is the identifier assigned to this vulnerability.

Movable Type 7 r.5002 and earlier (Movable Type 7 Series), Movable Type 6.8.2 and earlier (Movable Type 6 Series), Movable Type Advanced 7 r.5002 and earlier (Movable Type Advanced 7 Series), Movable Type Advanced 6.8.2 and earlier (Movable Type Advanced 6 Series), Movable Type Premium 1.46 and earlier, and Movable Type Premium Advanced 1.46 and earlier allow remote attackers to execute arbitrary OS commands via unspecified vectors. Note that all versions of Movable Type 4.0 or later including unsupported (End-of-Life, EOL) versions are also affected by this vulnerability.

PraisonAI is a multi-agent teams system. Prior to version 4.5.97, SubprocessSandbox in all modes (BASIC, STRICT, NETWORK_ISOLATED) calls subprocess.run() with shell=True and relies solely on string-pattern matching to block dangerous commands. The blocklist does not include sh or bash as standalone executables, allowing trivial sandbox escape in STRICT mode via sh -c '<command>'. This issue has been patched in version 4.5.97.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient user input validation. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device using root-level privileges. Due to the nature of the vulnerability, only commands without parameters can be executed.

Ilevia EVE X1 Server version ≤ 4.7.18.0.eden contains an unauthenticated OS command injection vulnerability in the /ajax/php/login.php script. Remote attackers can execute arbitrary system commands by injecting payloads into the 'passwd' HTTP POST parameter, leading to full system compromise or denial of service.

Multiple vulnerabilities exist in the web-based management interface of Cisco Small Business RV Series Routers. A remote attacker could execute arbitrary commands or bypass authentication and upload files on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

An OS command injection vulnerability exists in EnGenius EnShare Cloud Service version 1.4.11 and earlier. The usbinteract.cgi script fails to properly sanitize user input passed to the path parameter, allowing unauthenticated remote attackers to inject arbitrary shell commands. The injected commands are executed with root privileges, leading to full system compromise. Exploitation evidence was observed by the Shadowserver Foundation on 2024-12-05 UTC.

The device has two web servers that expose unauthenticated REST APIs on the management network (TCP ports 8084 and 8086). Exploiting OS command injection through these APIs, an attacker can send arbitrary commands that are executed with administrative permissions by the underlying operating system.

Ilevia EVE X1/X5 Server version ≤ 4.7.18.0.eden contains a vulnerability in its authentication mechanism. Unsanitized input is passed to a system() call for authentication, allowing attackers to inject special characters and manipulate command parsing. Because the binary interprets non-zero exit codes from system() as successful authentication, remote attackers can bypass authentication and gain full access to the system.

Dell Unity, version(s) 5.5 and prior, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to arbitrary command execution.

Aperi'Solve is an open-source steganalysis web platform. Prior to 3.2.1, when uploading a JPEG, a user can specify an optional password to accompany the JPEG. This password is then directly passed into an expect command, which is then subsequently passed into a bash -c command, without any form of sanitization or validation. An unauthenticated attacker can achieve root-level RCE inside the worker container with a single HTTP request, enabling full read/write access to all user-uploaded images, analysis results, and plaintext steganography passwords stored on disk. Because the container shares a Docker network with PostgreSQL and Redis (no authentication on either), the attacker can pivot to dump the entire database or manipulate the job queue to poison results for other users. If Docker socket mounting or host volume mounts are present, this could escalate to full host compromise. This would also include defacement of the website itself. This vulnerability is fixed in 3.2.1.

Cacti is an open source platform which provides a robust and extensible operational monitoring and fault management framework for users. In affected versions a command injection vulnerability allows an unauthenticated user to execute arbitrary code on a server running Cacti, if a specific data source was selected for any monitored device. The vulnerability resides in the `remote_agent.php` file. This file can be accessed without authentication. This function retrieves the IP address of the client via `get_client_addr` and resolves this IP address to the corresponding hostname via `gethostbyaddr`. After this, it is verified that an entry within the `poller` table exists, where the hostname corresponds to the resolved hostname. If such an entry was found, the function returns `true` and the client is authorized. This authorization can be bypassed due to the implementation of the `get_client_addr` function. The function is defined in the file `lib/functions.php` and checks serval `$_SERVER` variables to determine the IP address of the client. The variables beginning with `HTTP_` can be arbitrarily set by an attacker. Since there is a default entry in the `poller` table with the hostname of the server running Cacti, an attacker can bypass the authentication e.g. by providing the header `Forwarded-For: <TARGETIP>`. This way the function `get_client_addr` returns the IP address of the server running Cacti. The following call to `gethostbyaddr` will resolve this IP address to the hostname of the server, which will pass the `poller` hostname check because of the default entry. After the authorization of the `remote_agent.php` file is bypassed, an attacker can trigger different actions. One of these actions is called `polldata`. The called function `poll_for_data` retrieves a few request parameters and loads the corresponding `poller_item` entries from the database. If the `action` of a `poller_item` equals `POLLER_ACTION_SCRIPT_PHP`, the function `proc_open` is used to execute a PHP script. The attacker-controlled parameter `$poller_id` is retrieved via the function `get_nfilter_request_var`, which allows arbitrary strings. This variable is later inserted into the string passed to `proc_open`, which leads to a command injection vulnerability. By e.g. providing the `poller_id=;id` the `id` command is executed. In order to reach the vulnerable call, the attacker must provide a `host_id` and `local_data_id`, where the `action` of the corresponding `poller_item` is set to `POLLER_ACTION_SCRIPT_PHP`. Both of these ids (`host_id` and `local_data_id`) can easily be bruteforced. The only requirement is that a `poller_item` with an `POLLER_ACTION_SCRIPT_PHP` action exists. This is very likely on a productive instance because this action is added by some predefined templates like `Device - Uptime` or `Device - Polling Time`. This command injection vulnerability allows an unauthenticated user to execute arbitrary commands if a `poller_item` with the `action` type `POLLER_ACTION_SCRIPT_PHP` (`2`) is configured. The authorization bypass should be prevented by not allowing an attacker to make `get_client_addr` (file `lib/functions.php`) return an arbitrary IP address. This could be done by not honoring the `HTTP_...` `$_SERVER` variables. If these should be kept for compatibility reasons it should at least be prevented to fake the IP address of the server running Cacti. This vulnerability has been addressed in both the 1.2.x and 1.3.x release branches with `1.2.23` being the first release containing the patch.

PraisonAI is a multi-agent teams system. Prior to version 1.5.90, run_python() in praisonai constructs a shell command string by interpolating user-controlled code into python3 -c "<code>" and passing it to subprocess.run(..., shell=True). The escaping logic only handles \ and ", leaving $() and backtick substitutions unescaped, allowing arbitrary OS command execution before Python is invoked. This issue has been patched in version 1.5.90.

Ilevia EVE X1 Server firmware versions ≤ 4.7.18.0.eden contain an OS command injection vulnerability in mbus_build_from_csv.php that allows an unauthenticated attacker to execute arbitrary code. Ilevia has declined to service this vulnerability, and recommends that customers not expose port 8080 to the internet.

The web service of iSherlock from HGiga has an OS Command Injection vulnerability, allowing unauthenticated remote attackers to inject arbitrary OS commands and execute them on the server.

An OS command injection vulnerability exists in white-labeled DVRs manufactured by TVT, affecting a custom HTTP service called "Cross Web Server" that listens on TCP ports 81 and 82. The web interface fails to sanitize input in the URI path passed to the language extraction functionality. When the server processes a request to /language/[lang]/index.html, it uses the [lang] input unsafely in a tar extraction command without proper escaping. This allows an unauthenticated remote attacker to inject shell commands and achieve arbitrary command execution as root. Exploitation evidence was observed by the Shadowserver Foundation on 2025-02-06 UTC.

PraisonAI is a multi-agent teams system. From version 4.5.15 to before version 4.5.69, the --mcp CLI argument is passed directly to shlex.split() and forwarded through the call chain to anyio.open_process() with no validation, allowlist check, or sanitization at any hop, allowing arbitrary OS command execution as the process user. This issue has been patched in version 4.5.69.