A vulnerability in a specific CLI command implementation of Cisco Nexus 9000 Series ACI Mode Switch Software could allow an authenticated, local attacker to escape a restricted shell on an affected device. The vulnerability is due to insufficient sanitization of user-supplied input when issuing a specific CLI command with parameters on an affected device. An attacker could exploit this vulnerability by authenticating to the device CLI and issuing certain commands. A successful exploit could allow the attacker to escape the restricted shell and execute arbitrary commands with root-level privileges on the affected device. This vulnerability only affects Cisco Nexus 9000 Series ACI Mode Switches that are running a release prior to 14.0(3d).

DrayTek Vigor2960 v1.5.1.4 allows an authenticated attacker with network access to the web management interface to inject operating system commands via the mainfunction.cgi 'parameter' parameter. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability in the 'libsal.so' of the Zyxel GS1900 series firmware version 2.60 could allow an authenticated local user to execute arbitrary OS commands via a crafted function call.

A vulnerability classified as critical was found in KylinSoft youker-assistant on KylinOS. Affected by this vulnerability is the function adjust_cpufreq_scaling_governer. The manipulation leads to os command injection. It is possible to launch the attack on the local host. The exploit has been disclosed to the public and may be used. Upgrading to version 3.1.4.13 is able to address this issue. It is recommended to upgrade the affected component. The associated identifier of this vulnerability is VDB-226099.

A command injection vulnerability in tcpdump command processing on Juniper Networks Junos OS Evolved allows an attacker with authenticated CLI access to be able to bypass configured access protections to execute arbitrary shell commands within the context of the current user. The vulnerability allows an attacker to bypass command authorization restrictions assigned to their specific user account and execute commands that are available to the privilege level for which the user is assigned. For example, a user that is in the super-user login class, but restricted to executing specific CLI commands could exploit the vulnerability to execute any other command available to an unrestricted admin user. This vulnerability does not increase the privilege level of the user, but rather bypasses any CLI command restrictions by allowing full access to the shell. This issue affects Juniper Networks Junos OS Evolved: All versions prior to 20.3R2-S1-EVO; 20.4 versions prior to 20.4R2-S2-EVO; 21.1 versions prior to 21.1R2-EVO; 21.2 versions prior to 21.2R1-S1-EVO, 21.2R2-EVO.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments that are passed to specific CLI commands. An attacker could exploit this vulnerability by including crafted input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with the privileges of the currently logged-in user.

The text-to-speech engine in libretro RetroArch for Windows 1.9.0 passes unsanitized input to PowerShell through platform_win32.c via the accessibility_speak_windows function, which allows attackers who have write access on filesystems that are used by RetroArch to execute code via command injection using specially a crafted file and directory names.

Multiple vulnerabilities in the restricted shell of Cisco Evolved Programmable Network Manager (EPNM), Cisco Identity Services Engine (ISE), and Cisco Prime Infrastructure could allow an authenticated, local attacker to escape the restricted shell and gain root privileges on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Pi-hole is a Linux network-level advertisement and Internet tracker blocking application. Multiple privilege escalation vulnerabilities were discovered in version 5.2.4 of Pi-hole core. See the referenced GitHub security advisory for details.

A vulnerability, which was classified as critical, was found in kylin-system-updater up to 1.4.20kord on Ubuntu Kylin. Affected is the function InstallSnap of the component Update Handler. The manipulation leads to command injection. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-222600.

Accellion FTA 9_12_411 and earlier is affected by OS command execution via a local web service call. The fixed version is FTA_9_12_416 and later.

Command injection vulnerability in Movistar 4G router affecting version ES_WLD71-T1_v2.0.201820. This vulnerability allows an authenticated user to execute commands inside the router by making a POST request to the URL '/cgi-bin/gui.cgi'.

Dell Unity, versions prior to 5.4, contains an OS Command Injection Vulnerability within its svc_cbr utility. An authenticated malicious user with local access could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS, with the privileges of the vulnerable application.

PowerScale OneFS 8.1.2,8.2.2 and 9.1.0 contains an improper input sanitization issue in a command. The Compadmin user could potentially exploit this vulnerability, leading to potential privileges escalation.

The Tecno Camon iClick 2 Android device with a build fingerprint of TECNO/H622/TECNO-ID6:8.1.0/O11019/F-180824V116:user/release-keys contains a pre-installed platform app with a package name of com.lovelyfont.defcontainer (versionCode=7, versionName=7.0.11). This app contains an exported service named com.lovelyfont.manager.FontCoverService that allows any app co-located on the device to supply arbitrary commands via shell script to be executed as the system user that are triggered by writing an attacker-selected message to the logcat log. This app cannot be disabled by the user and the attack can be performed by a zero-permission app. Executing commands as the system user can allow a third-party app to video record the user's screen, factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the Graphical User Interface (GUI), and obtains the user's text messages, and more. Executing commands as the system user can allow a third-party app to factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the GUI, change the default Input Method Editor (IME) (e.g., keyboard) with one contained within the attacking app that contains keylogging functionality, and obtains the user's text messages, and more.

Privilege Escalation vulnerability in McAfee Management of Native Encryption (MNE) before 4.1.4 allows local users to gain elevated privileges via a crafted user input.

A vulnerability in the ConfD CLI and the Cisco Crosswork Network Services Orchestrator CLI could allow an authenticated, low-privileged, local attacker to read and write arbitrary files as root on the underlying operating system. This vulnerability is due to improper authorization enforcement when specific CLI commands are used. An attacker could exploit this vulnerability by executing an affected CLI command with crafted arguments. A successful exploit could allow the attacker to read or write arbitrary files on the underlying operating system with the privileges of the root user.

An exploitable vulnerability exists in the verified boot protection of the CUJO Smart Firewall. It is possible to add arbitrary shell commands into the dhcpd.conf file, that persist across reboots and firmware updates, and thus allow for executing unverified commands. To trigger this vulnerability, a local attacker needs to be able to write into /config/dhcpd.conf.

The System Information Library for Node.JS (npm package "systeminformation") is an open source collection of functions to retrieve detailed hardware, system and OS information. In systeminformation before version 5.3.1 there is a command injection vulnerability. Problem was fixed in version 5.3.1. As a workaround instead of upgrading, be sure to check or sanitize service parameters that are passed to si.inetLatency(), si.inetChecksite(), si.services(), si.processLoad() ... do only allow strings, reject any arrays. String sanitation works as expected.

A vulnerability in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to obtain read/write file system access on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of user arguments that are passed to specific CLI commands. An attacker with a low-privileged account could exploit this vulnerability by using crafted commands at the prompt. A successful exploit could allow the attacker to elevate privileges to root.

A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges on the underlying operating system of an affected device that is running in multi-instance mode. This vulnerability is due to insufficient validation of user-supplied command arguments. An attacker could exploit this vulnerability by submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.

An OS command injection vulnerability exists in the MacOS Text-To-Speech class MacOSTTS of the significant-gravitas/autogpt project, affecting versions up to v0.5.0. The vulnerability arises from the improper neutralization of special elements used in an OS command within the `_speech` method of the MacOSTTS class. Specifically, the use of `os.system` to execute the `say` command with user-supplied text allows for arbitrary code execution if an attacker can inject shell commands. This issue is triggered when the AutoGPT instance is run with the `--speak` option enabled and configured with `TEXT_TO_SPEECH_PROVIDER=macos`, reflecting back a shell injection snippet. The impact of this vulnerability is the potential execution of arbitrary code on the instance running AutoGPT. The issue was addressed in version 5.1.0.

A vulnerability in a CLI command of Cisco IOS XR Software for the Cisco 8000 Series Routers and Network Convergence System 540 Series Routers running NCS540L software images could allow an authenticated, local attacker to elevate their privilege to root. To exploit this vulnerability, an attacker would need to have a valid account on an affected device. The vulnerability is due to insufficient validation of command line arguments. An attacker could exploit this vulnerability by authenticating to the device and entering a crafted command at the prompt. A successful exploit could allow an attacker with low-level privileges to escalate their privilege level to root.

Qualys discovered that needrestart, before version 3.8, passes unsanitized data to a library (Modules::ScanDeps) which expects safe input. This could allow a local attacker to execute arbitrary shell commands. Please see the related CVE-2024-10224 in Modules::ScanDeps.

A command injection vulnerability in the license-check daemon of Juniper Networks Junos OS that may allow a locally authenticated attacker with low privileges to execute commands with root privilege. license-check is a daemon used to manage licenses in Junos OS. To update licenses, a user executes the command 'request system license update' via the CLI. An attacker with access to this CLI command may be able to exploit the vulnerability. This issue affects Juniper Networks Junos OS: 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R3-S6; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S3; 19.2 versions prior to 19.2R3-S1; 19.3 versions prior to 19.3R2-S5, 19.3R3; 19.4 versions prior to 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R1-S4, 20.1R2; 20.2 versions prior to 20.2R1-S2, 20.2R2.

A vulnerability in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to perform a command injection attack on an affected device. The vulnerability is due to insufficient validation of user-supplied input to a configuration command. An attacker could exploit this vulnerability by including malicious input during the execution of this command. A successful exploit could allow a non-privileged attacker authenticated in the restricted CLI to execute arbitrary commands on the underlying operating system (OS) with root privileges.

fsa through 0.5.1 is vulnerable to Command Injection. The first argument of 'execGitCommand()', located within 'lib/rep.js#63' can be controlled by users without any sanitization to inject arbitrary commands.

A privilege escalation in the EdgeSwitch prior to version 1.7.1, an CGI script don't fully sanitize the user input resulting in local commands execution, allowing an operator user (Privilege-1) to escalate privileges and became administrator (Privilege-15).

Qualys discovered that if unsanitized input was used with the library Modules::ScanDeps, before version 1.36 a local attacker could possibly execute arbitrary shell commands by open()ing a "pesky pipe" (such as passing "commands|" as a filename) or by passing arbitrary strings to eval().

The issue occurs because tagName user input is formatted inside the exec function is executed without any checks.

OS Command Injection vulnerability in the wirelessConnect handler of Abode iota All-In-One Security Kit allows an attacker to inject commands and gain root access. This issue affects: Abode iota All-In-One Security Kit versions prior to 1.0.2.23_6.9V_dev_t2_homekit_RF_2.0.19_s2_kvsABODE oz.

A vulnerability classified as critical has been found in KylinSoft kylin-system-updater up to 2.0.5.16-0k2.33. Affected is an unknown function of the file /usr/share/kylin-system-updater/SystemUpdater/UpgradeStrategiesDbus.py of the component com.kylin.systemupgrade Service. The manipulation of the argument SetDownloadspeedMax leads to os command injection. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-248940. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

There is an OS command injection vulnerability in Crestron AM-300 firmware version 1.4499.00018 which may enable a user of a limited-access SSH session to escalate their privileges to root-level access.

Amaze File Manager before 3.5.1 allows attackers to obtain root privileges via shell metacharacters in a symbolic link.

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker to inject a command to the underlying operating system that will execute with root privileges upon the next reboot of the device. The authenticated user must have privileged EXEC permissions on the device. The vulnerability is due to insufficient protection of values passed to a script that executes during device startup. An attacker could exploit this vulnerability by writing values to a specific file. A successful exploit could allow the attacker to execute commands with root privileges each time the affected device is restarted.

A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.

An issue was discovered in ClusterLabs crmsh through 4.2.1. Local attackers able to call "crm history" (when "crm" is run) were able to execute commands via shell code injection to the crm history commandline, potentially allowing escalation of privileges.

A command injection issue in dji_sys in DJI Mavic 2 Remote Controller before firmware version 01.00.0510 allows for code execution via a malicious firmware upgrade packet.

A vulnerability in the CLI of Cisco FXOS Software and Cisco UCS Manager Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS). The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including crafted arguments to specific commands. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS with the privileges of the currently logged-in user for all affected platforms excluding Cisco UCS 6400 Series Fabric Interconnects. On Cisco UCS 6400 Series Fabric Interconnects, the injected commands are executed with root privileges.

Network Manager VPNC plugin (aka networkmanager-vpnc) before version 1.2.6 is vulnerable to a privilege escalation attack. A new line character can be used to inject a Password helper parameter into the configuration data passed to VPNC, allowing an attacker to execute arbitrary commands as root.

A vulnerability in the local management (local-mgmt) CLI of Cisco UCS Manager Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS) on an affected device. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by including crafted arguments to specific commands on the local management CLI. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS with the privileges of the currently logged-in user for all affected platforms excluding Cisco UCS 6400 Series Fabric Interconnects. On Cisco UCS 6400 Series Fabric Interconnects, the injected commands are executed with root privileges.

A vulnerability in the local management (local-mgmt) CLI of Cisco FXOS Software and Cisco UCS Manager Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS) of an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including crafted arguments to specific commands. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS with the privileges of the currently logged-in user for all affected platforms excluding Cisco UCS 6400 Series Fabric Interconnects. On Cisco UCS 6400 Series Fabric Interconnects, the injected commands are executed with root privileges.

A vulnerability in the CLI of Cisco SD-WAN Solution software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI utility. The attacker must be authenticated to access the CLI utility. A successful exploit could allow the attacker to execute commands with root privileges.

A vulnerability has been identified in SCALANCE LPE9403 (6GK5998-3GS00-2AC2) (All versions with SINEMA Remote Connect Edge Client installed). Affected devices do not properly sanitize configuration parameters. This could allow a non-privileged local attacker to execute root commands on the device.

Dell EMC PowerScale OneFS versions 8.1.0 - 9.1.0 contain an improper input validation vulnerability. A user with the ISI_PRIV_CLUSTER privilege may exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS, with the privileges of the vulnerable application.

A vulnerability in the command-line interface (CLI) in the Cisco SD-WAN Solution could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI utility. The attacker must be authenticated to access the CLI utility. A successful exploit could allow the attacker to execute commands with root privileges.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to perform a command-injection attack on an affected device. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting malicious command arguments into a vulnerable CLI command. A successful exploit could allow the attacker, authenticated as a privileged user, to execute arbitrary commands with root privileges. Note: On products that support multiple virtual device contexts (VDC), this vulnerability could allow an attacker to access files from any VDC. This vulnerability affects Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve51704, CSCve91749, CSCve91768.

A vulnerability in the CLI parser of Cisco NX-OS Software could allow an authenticated, local attacker to perform a command-injection attack on an affected device. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting malicious command arguments into a vulnerable CLI command. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the affected device. Note: This vulnerability requires that any feature license is uploaded to the device. The vulnerability does not require that the license be used. This vulnerability affects MDS 9000 Series Multilayer Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve51693, CSCve91634, CSCve91659, CSCve91663.

Dell Unity, version(s) 5.5 and prior, contain(s) an OS Command Injection Vulnerability in its svc_nfssupport utility. An authenticated attacker could potentially exploit this vulnerability, escaping the restricted shell and execute arbitrary operating system commands with root privileges.