A vulnerability was found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. This issue affects the function um_inspect_cross_band of the file /goform/RP_setBasicAuto. The manipulation of the argument staticGateway leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 7 of 46).

A vulnerability was found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected by this vulnerability is the function setDeviceName of the file /goform/setDeviceName. The manipulation of the argument DeviceName leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 15 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 42 of 46).

D-Link DIR-846 Firmware FW100A53DBR was discovered to contain a remote command execution (RCE) vulnerability via the lan(0)_dhcps_staticlist parameter. This vulnerability is exploited via a crafted POST request.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 11 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 19 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 24 of 46).

A weakness has been identified in D-Link DIR-816L 206b01. Affected by this issue is the function soapcgi_main of the file /soap.cgi. This manipulation of the argument service causes os command injection. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be exploited. This vulnerability only affects products that are no longer supported by the maintainer.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 14 of 46).

A vulnerability was identified in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. This issue affects the function RP_setBasic of the file /goform/RP_setBasic. The manipulation of the argument bssid leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 29 of 46).

A security vulnerability has been detected in LB-LINK BL-X26 1.2.8. This affects an unknown function of the file /goform/set_blacklist of the component HTTP Handler. Such manipulation of the argument mac leads to os command injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected by this issue is the function sub_3517C of the file /goform/setWan. The manipulation of the argument Hostname leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 33 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 3 of 46).

A vulnerability was identified in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected by this vulnerability is the function um_red of the file /goform/RP_setBasicAuto. The manipulation of the argument hname leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 34 of 46).

A vulnerability was identified in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. This affects the function RP_setBasicAuto of the file /goform/RP_setBasicAuto. The manipulation of the argument staticIp/staticNetmask leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 4 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 45 of 46).

An issue was discovered on D-Link DWR-116 through 1.06, DWR-512 through 2.02, DWR-712 through 2.02, DWR-912 through 2.02, DWR-921 through 2.02, and DWR-111 through 1.01 devices. An authenticated attacker may execute arbitrary code by injecting the shell command into the chkisg.htm page Sip parameter. This allows for full control over the device internals.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 21 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 38 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 23 of 46).

Operating system command injection in ekorCCP and ekorRCI, which could allow an authenticated attacker to execute commands, create new users with elevated privileges or set up a backdoor.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 37 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 46 of 46).

A vulnerability was found in agentUniverse up to 0.0.18 and classified as critical. This issue affects the function StdioServerParameters of the component MCPSessionManager/MCPTool/MCPToolkit. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

MiR software versions prior to version 3.0.0 are affected by a command injection vulnerability. A malicious HTTP request crafted by an authenticated user could allow the execution of arbitrary commands on the underlying operating system.

A vulnerability has been found in Xuxueli xxl-job up to 3.1.1 and classified as critical. Affected by this vulnerability is the function commandJobHandler of the file src\main\java\com\xxl\job\executor\service\jobhandler\SampleXxlJob.java. The manipulation leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

D-Link DIR-615 2.5.17 devices allow Remote Code Execution via shell metacharacters in the Host field of the System / Traceroute screen.

A post-authentication command injection vulnerability in the "priv" parameter of Zyxel DX3300-T0 firmware version 5.50(ABVY.6.3)C0 and earlier could allow an authenticated attacker to execute operating system (OS) commands on an affected device.

A vulnerability, which was classified as critical, was found in SkyworkAI DeepResearchAgent up to 08eb7f8eb9505d0094d75bb97ff7dacc3fa3bbf2. Affected is the function from_code/from_dict/from_mcp of the file src/tools/tools.py. The manipulation leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The vendor was contacted early about this disclosure but did not respond in any way.

The Java Admin Console in Veritas NetBackup through 10.1 and related Veritas products on Linux and UNIX allows authenticated non-root users (that have been explicitly added to the auth.conf file) to execute arbitrary commands as root.

A vulnerability, which was classified as critical, has been found in agno-agi agno up to 1.7.5. This issue affects the function MCPTools/MultiMCPTools in the library libs/agno/agno/tools/mcp.py of the component Model Context Protocol Handler. The manipulation of the argument command leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Logstorage version 8.0.0 and earlier, and ELC Analytics version 3.0.0 and earlier allow remote attackers to execute arbitrary OS commands via a specially crafted log file.

A vulnerability, which was classified as critical, was found in Netgear D6400 1.0.0.114. This affects an unknown part of the file diag.cgi. The manipulation of the argument host_name leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early and confirmed the existence of the vulnerability. They reacted very quickly, professional and kind. This vulnerability only affects products that are no longer supported by the maintainer.

A Remote Code Execution (RCE) vulnerability was found in includes/baijiacms/common.inc.php in baijiacms v4.

A vulnerability in the CronJob scheduler API of Cisco Digital Network Architecture (DNA) Center could allow an authenticated, remote attacker to perform a command injection attack. The vulnerability is due to incorrect input validation of user-supplied data. An attacker could exploit this vulnerability by sending a malicious packet. A successful exploit could allow the attacker to execute arbitrary commands with root privileges. Cisco Bug IDs: CSCvi42263.

A vulnerability in the NX-API management application programming interface (API) in devices running, or based on, Cisco NX-OS Software could allow an authenticated, remote attacker to execute commands with elevated privileges. The vulnerability is due to a failure to properly validate certain parameters included within an NX-API request. An attacker that can successfully authenticate to the NX-API could submit a request designed to bypass NX-OS role assignment. A successful exploit could allow the attacker to execute commands with elevated privileges. This vulnerability affects the following if configured to use the NX-API feature: MDS 9000 Series Multilayer Switches, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode. Cisco Bug IDs: CSCvc73177, CSCve40903, CSCve40911.

A vulnerability in the CLI parser of Cisco Network Services Orchestrator (NSO) could allow an authenticated, remote attacker to execute arbitrary shell commands with the privileges of the root user. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by injecting malicious arguments into vulnerable commands. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the affected system. This vulnerability affects the following releases of Cisco Network Services Orchestrator (NSO): 4.1 through 4.1.6.0, 4.2 through 4.2.4.0, 4.3 through 4.3.3.0, 4.4 through 4.4.2.0. Cisco Bug IDs: CSCvf99982.

baserCMS (baserCMS 4.1.0.1 and earlier versions, baserCMS 3.0.15 and earlier versions) allows remote authenticated attackers to execute arbitrary OS commands via unspecified vectors.

A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, Cisco RV130W Wireless-N Multifunction VPN Router, and Cisco RV215W Wireless-N VPN Router could allow an authenticated, remote attacker to execute arbitrary commands. The vulnerability is due to improper validation of user-supplied input to scripts by the web-based management interface. An attacker could exploit this vulnerability by sending malicious requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary commands with the privileges of the root user.

TOTOLINK X6000R v9.4.0cu.1498_B20250826 contains an OS command injection vulnerability in the NTPSyncWithHost handler of the /usr/sbin/shttpd executable. The host_time parameter is retrieved via sub_40C404 and passed to a date -s shell command through CsteSystem. While the first two tokens of the input are validated, the remainder of the string is not sanitized, allowing authenticated attackers to execute arbitrary shell commands via shell metacharacters.

A vulnerability in the Secure Copy Protocol (SCP) server of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, remote attacker to access the shell of the underlying Linux operating system on the affected device. The vulnerability is due to improper input validation of command arguments. An attacker could exploit this vulnerability by using crafted arguments when opening a connection to the affected device. An exploit could allow the attacker to gain shell access with a non-root user account to the underlying Linux operating system on the affected device. Due to the system design, access to the Linux shell could allow execution of additional attacks that may have a significant impact on the affected system. This vulnerability affects Cisco devices that are running release 3.7.1, 3.6.3, or earlier releases of Cisco Enterprise NFV Infrastructure Software (NFVIS) when access to the SCP server is allowed on the affected device. Cisco NFVIS Releases 3.5.x and 3.6.x do allow access to the SCP server by default, while Cisco NFVIS Release 3.7.1 does not. Cisco Bug IDs: CSCvh25026.

ILIAS before 7.16 allows OS Command Injection.

Multiple Xiongmai NVR devices, including MBD6304T V4.02.R11.00000117.10001.131900.00000 and NBD6808T-PL V4.02.R11.C7431119.12001.130000.00000, allow authenticated users to execute arbitrary commands as root, as exploited in the wild starting in approximately 2019. A remote and authenticated attacker, possibly using the default admin:tlJwpbo6 credentials, can connect to port 34567 and execute arbitrary operating system commands via a crafted JSON file during an upgrade request. Since at least 2021, Xiongmai has applied patches to prevent attackers from using this mechanism to execute telnetd.