The administrative interface of Cohesive Networks vns3:vpn appliances before version 4.11.1 is vulnerable to authenticated remote code execution leading to server compromise.

A vulnerability classified as critical has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. Affected is the function cgi_FMT_R12R5_1st_DiskMGR of the file /cgi-bin/hd_config.cgi. The manipulation of the argument f_source_dev leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

A vulnerability in Cisco WebEx Meetings Server could allow an authenticated, remote attacker to execute predetermined shell commands on other hosts. More Information: CSCuz03353. Known Affected Releases: 2.6.

IBM Security Verify Access Appliance 10.0.0 through 10.0.8 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request.

Netgear Nighthawk R6700 version 1.0.4.120 contains a command injection vulnerability in update functionality of the device. By triggering a system update check via the SOAP interface, the device is susceptible to command injection via preconfigured values.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in D-Link DIR-600 up to 2.18. It has been rated as critical. This issue affects the function soapcgi_main of the file /soap.cgi. The manipulation of the argument service leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-273329 was assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

aaPanel through 6.6.6 allows remote authenticated users to execute arbitrary commands via shell metacharacters in a modified /system?action=ServiceAdmin request (start, stop, or restart) to the setting menu of Sotfware Store.

The git hook feature in Gitea 1.1.0 through 1.12.5 might allow for authenticated remote code execution in customer environments where the documentation was not understood (e.g., one viewpoint is that the dangerousness of this feature should be documented immediately above the ENABLE_GIT_HOOKS line in the config file). NOTE: The vendor has indicated this is not a vulnerability and states "This is a functionality of the software that is limited to a very limited subset of accounts. If you give someone the privilege to execute arbitrary code on your server, they can execute arbitrary code on your server. We provide very clear warnings to users around this functionality and what it provides.

A vulnerability was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. It has been classified as critical. This affects the function sprintf of the file /cgi-bin/hd_config.cgi. The manipulation of the argument f_mount leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

TRENDnet TEW-827DRU devices through 2.06B04 contain multiple command injections in apply.cgi via the action send_log_email with the key auth_acname (or auth_passwd), allowing an authenticated user to run arbitrary commands on the device.

Monstra CMS 3.0.4 allows an attacker, who already has administrative access to modify .chunk.php files on the Edit Chunk screen, to execute arbitrary OS commands via the Theme Module by visiting the admin/index.php?id=themes&action=edit_chunk URI. NOTE: there is no indication that the Edit Chunk feature was intended to prevent an administrator from using PHP's exec feature

The WP-DBManager (aka Database Manager) plugin before 2.7.2 for WordPress allows remote authenticated users to execute arbitrary commands via shell metacharacters in the (1) $backup['filepath'] (aka "Path to Backup:" field) or (2) $backup['mysqldumppath'] variable.

A vulnerability, which was classified as critical, was found in Ruijie RG-UAC 1.0. This affects an unknown part of the file /view/userAuthentication/SSO/commit.php. The manipulation of the argument ad_log_name leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-269157 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in Ruijie RG-UAC up to 20240506. This affects an unknown part of the file /view/networkConfig/GRE/gre_add_commit.php. The manipulation of the argument name/remote/local/IP leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-263937 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in setL2tpServerCfg. Authenticated Attackers can send malicious packet to execute arbitrary commands.

A vulnerability classified as critical was found in Ruijie RG-UAC up to 20240506. Affected by this vulnerability is an unknown functionality of the file /view/networkConfig/RouteConfig/StaticRoute/static_route_edit_commit.php. The manipulation of the argument oldipmask/oldgateway leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-263935. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an OS command injection vulnerability via the "recHour" parameter in setScheduleCfg.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an OS command injection vulnerability via the "eHour" parameter in setWiFiScheduleCfg.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an OS command injection vulnerability via the "limit" parameter in setVpnAccountCfg.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an OS command injection vulnerability via the "switch" parameter in setScheduleCfg.

Missing input validation and OS command integration of the input in the ORing IAP-420 web-interface allows authenticated command injection.This issue affects IAP-420 version 2.01e and below.

Access analysis CGI An-Analyzer released in 2019 June 24 and earlier allows remote authenticated attackers to execute arbitrary OS commands via the Management Page.

CyberPanel before 2.3.8 allows remote authenticated users to execute arbitrary commands via shell metacharacters in the phpSelection field to the websites/submitWebsiteCreation URI.

DrayTek Vigor3900 v1.5.1.6 was discovered to contain an authenticated command injection vulnerability via the name parameter in the run_command function.

Command injection in the <redacted> parameter of a <redacted>.exe request leads to remote code execution as the root user. This issue affects Iocharger firmware for AC models before version 24120701. Likelihood: Moderate – This action is not a common place for command injection vulnerabilities to occur. Thus, an attacker will likely only be able to find this vulnerability by reverse-engineering the firmware or trying it on all <redacted> fields. The attacker will also need a (low privilege) account to gain access to the <redacted> binary, or convince a user with such access to execute a payload. Impact: Critical – The attacker has full control over the charging station as the root user, and can arbitrarily add, modify and delete files and services. CVSS clarification. The attack can be executed over any network connection the station is listening to and serves the web interface (AV:N), and there are no additional security measure sin place that need to be circumvented (AC:L), the attack does not rely on preconditions (AT:N). The attack does require authentication, but the level of authentication is irrelevant (PR:L), it does not require user interaction (UI:N). If is a full system compromise, potentially fully compromising confidentiality, integrity and availability of the devicer (VC:H/VI:H/VA:H).  A compromised charger can be used to "pivot" onto networks that should otherwise be closed, cause a low confidentiality and interity impact on subsequent systems. (SC:L/SI:L/SA:H). Because this device is an EV charger handing significant amounts of power, we suspect this vulnerability can have a safety impact (S:P). The attack can be automated (AU:Y).

A low privileged remote attacker can trigger the execution of arbitrary OS commands as root due to improper neutralization of special elements in the variable PROXY_HTTP_PORT in mGuard devices.

OS command injection vulnerability in multiple digital video recorders provided by TAKENAKA ENGINEERING CO., LTD. allows a remote authenticated attacker to execute an arbitrary OS command on the device or alter the device settings.

Tenda G3 v3.0 v15.11.0.20 was discovered to contain a command injection vulnerability via the formSetDebugCfg function.

Tenda G3 v3.0 v15.11.0.20 was discovered to contain a command injection vulnerability via the formSetUSBPartitionUmount function.

This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of NetGain Systems Enterprise Manager 7.2.730 build 1034. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the org.apache.jsp.u.jsp.tools.exec_jsp servlet, which listens on TCP port 8081 by default. When parsing the command parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code under the context of Administrator. Was ZDI-CAN-5193.

trixbox 2.8.0.4 has OS command injection via shell metacharacters in the lang parameter to /maint/modules/home/index.php.

A vulnerability in the IBM TS7700 Management Interface 8.51.2.12, 8.52.200.111, 8.52.102.13, and 8.53.0.63 could allow an authenticated user to submit a specially crafted URL leading to privilege escalation and remote code execution. IBM X-Force ID: 246320.

A command injection vulnerability was reported in the Integrated Management Module (IMM) of legacy IBM System x 3550 M3 and IBM System x 3650 M3 servers that could allow the execution of operating system commands over an authenticated SSH or Telnet session.

Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an Improper Neutralization of Special Elements Used In A Command via the Data collection endpoint. An attacker with admin privileges can upload a specially crafted file to achieve remote code execution.

An exploitable command injection vulnerability exists in the web server functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted HTTP POST can cause a privilege escalation resulting in root shell. An attacker can inject OS commands into the remoteNetmask0= parameter in the "/goform/net\_Web\_get_value" uri to trigger this vulnerability.

In the EyesOfNetwork web interface (aka eonweb) 5.1-0, module\tool_all\tools\snmpwalk.php does not properly restrict popen calls, which allows remote attackers to execute arbitrary commands via shell metacharacters in a parameter.

T&W WIFI Repeater BE126 allows remote authenticated users to execute arbitrary code via shell metacharacters in the user parameter to cgi-bin/webupg.

A command injection vulnerability has been reported to affect QNAP device running Media Streaming add-on. If exploited, this vulnerability allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of Media Streaming add-on: QTS 5.0.0: Media Streaming add-on 500.0.0.3 ( 2021/08/20 ) and later QTS 4.5.4: Media Streaming add-on 500.0.0.3 ( 2021/08/20 ) and later QTS 4.3.6: Media Streaming add-on 430.1.8.12 ( 2021/08/20 ) and later QTS 4.3.3: Media Streaming add-on 430.1.8.12 ( 2021/09/29 ) and later QuTS-Hero 5.0.0: Media Streaming add-on 500.0.0.3 ( 2021/08/20 ) and later

A remote arbitrary command execution vulnerability was discovered in Aruba ClearPass Policy Manager version(s): Prior to 6.10.0, 6.9.6 and 6.8.9. Aruba has released updates to ClearPass Policy Manager that address this security vulnerability.

A remote arbitrary command execution vulnerability was discovered in Aruba ClearPass Policy Manager version(s): Prior to 6.10.0, 6.9.6 and 6.8.9. Aruba has released updates to ClearPass Policy Manager that address this security vulnerability.

IBM Security Guardium 10.0 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially-crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 124633.

Multiple camera devices by UDP Technology, Geutebrück and other vendors are vulnerable to command injection, which may allow an attacker to remotely execute arbitrary code.

Multiple camera devices by UDP Technology, Geutebrück and other vendors are vulnerable to command injection, which may allow an attacker to remotely execute arbitrary code.

Insufficient validation of user-supplied input for the Solstice Pod before 2.8.4 networking configuration enables authenticated attackers to execute arbitrary commands as root.

An OS command injection vulnerability has been reported to affect QUSBCam2. If exploited, the vulnerability could allow users to execute commands via a network. We have already fixed the vulnerability in the following version: QUSBCam2 2.0.3 ( 2023/06/15 ) and later

Command injection vulnerability in Trend Micro Smart Protection Server (Standalone) 3.1 and 3.2 server administration UI allows attackers with authenticated access to execute arbitrary code on vulnerable installations.

This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of EMC Data Protection Advisor 6.3.0. Authentication is required to exploit this vulnerability. The specific flaw exists within the EMC DPA Application service, which listens on TCP port 9002 by default. When parsing the preScript parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute arbitrary code under the context of SYSTEM. Was ZDI-CAN-4697. NOTE: Dell EMC disputes that this is a vulnerability

Multiple improper neutralization of special elements used in a command vulnerabilities [CWE-77] in FortiWeb management interface 6.4.1 and below, 6.3.15 and below, 6.2.5 and below may allow an authenticated attacker to execute unauthorized code or commands via crafted parameters of HTTP requests.