A vulnerability exists in the webserver that affects the RTU500 series product versions listed below. A malicious actor could perform cross-site scripting on the webserver due to user input being improperly sanitized.

An attacker could trick a user of Hitachi ABB Power Grids Ellipse Enterprise Asset Management (EAM) versions prior to and including 9.0.25 into visiting a malicious website posing as a login page for the Ellipse application and gather authentication credentials.

Lack of adequate input/output validation for ABB eSOMS versions 4.0 to 6.0.2 might allow an attacker to attack such as stored cross-site scripting by storing malicious content in the database.

For ABB eSOMS versions 4.0 to 6.0.2, the X-XSS-Protection HTTP response header is not set in responses from the web server. For older web browser not supporting Content Security Policy, this might increase the risk of Cross Site Scripting.

For ABB eSOMS versions 4.0 to 6.0.2, the HTTPOnly flag is not set. This can allow Javascript to access the cookie contents, which in turn might enable Cross Site Scripting.

A vulnerability exists in the webserver that affects the RTU500 series product versions listed below. A malicious actor could perform cross-site scripting on the webserver due to an RDT language file being improperly sanitized.

A vulnerability exists in the HCI IEC 60870-5-104 that affects the RTU500 series product versions listed below. Incomplete or wrong received APDU frame layout may cause blocking on link layer. Error reason was an endless blocking when reading incoming frames on link layer with wrong length information of APDU or delayed reception of data octets. Only communication link of affected HCI IEC 60870-5-104 is blocked. If attack sequence stops the communication to the previously attacked link gets normal again.

OPEXUS eComplaint and eCASE before 10.2.0.0 do not correctly sanitize the contents of the "Name of Organization" field when filling out case information. An authenticated attacker can inject an XSS payload which is executed in the context of a victim's session when they visit the case information page.

Vulnerability in SiAdmin 1.1 that allows XSS via the /show.php query parameter. This vulnerability could allow a remote attacker to send a specially crafted URL to an authenticated user and thereby steal their cookie session credentials.

The WP Stacker WordPress plugin through 1.8.5 does not have CSRF check in some places, and is missing sanitisation as well as escaping, which could allow attackers to make logged in admin add Stored XSS payloads via a CSRF attack

Inappropriate implementation in iOS in Google Chrome on iOS prior to 148.0.7778.216 allowed a remote attacker who convinced a user to engage in specific UI gestures to inject arbitrary scripts or HTML (UXSS) via a crafted HTML page. (Chromium security severity: High)

The Quiz and Survey Master (QSM) WordPress plugin before 9.0.2 does not validate and escape some of its Quiz fields before outputting them back in a page/post where the Quiz is embed, which could allow users with the contributor role and above to perform Stored Cross-Site Scripting attacks

In JetBrains TeamCity before 2022.10.2 there was an XSS vulnerability in the group creation process.

Multiple cross-site scripting (XSS) vulnerabilities in index.php in phazizGuestbook 2.0 allow remote attackers to inject arbitrary web script or HTML via the (1) name, (2) email, (3) url fields, and (4) text field (content parameter).

In JetBrains TeamCity before 2022.10.2 there was an XSS vulnerability in the user creation process.

Multiple cross-site scripting (XSS) vulnerabilities in Horde before 3.0.7 allow remote attackers to inject arbitrary web script or HTML via the (1) gzip/tar and (2) css MIME viewers, which do not filter or escape dangerous HTML when extracting and displaying attachments.

Hitachi Vantara Pentaho Business Analytics Server prior to versions 9.4.0.1 and 9.3.0.2, including 8.3.x allow a malicious URL to inject content into the Pentaho User Console through session variables. 

The 'WordPress RSS Aggregator' WordPress Plugin, versions < 4.23.9 are affected by a Cross-Site Scripting (XSS) vulnerability due to the lack of sanitization of the  'notice_id'  GET parameter.

Fresenius Kabi Vigilant Software Suite (Mastermed Dashboard) version 2.0.1.3 is vulnerable to reflected cross-site scripting attacks. An attacker could inject JavaScript in a GET parameter of HTTP requests and perform unauthorized actions such as stealing internal information and performing actions in context of an authenticated user.

Smoothwall Express versions prior to 3.1 Update 13 contain a reflected cross-site scripting vulnerability in the /redirect.cgi endpoint due to improper sanitation of the url parameter. Attackers can craft malicious URLs with javascript: schemes that execute arbitrary JavaScript in victims' browsers when clicked through the unsanitized link.

The Flat Preloader WordPress plugin before 1.5.4 does not enforce nonce checks when saving its settings, as well as does not sanitise and escape them, which could allow attackers to a make logged in admin change them with a Cross-Site Scripting payload (triggered either in the frontend or backend depending on the payload)

Inappropriate implementation in ServiceWorker in Google Chrome prior to 148.0.7778.96 allowed an attacker who convinced a user to install a malicious extension to inject arbitrary scripts or HTML (UXSS) via a crafted Chrome Extension. (Chromium security severity: Medium)

The Weather Effect WordPress plugin before 1.3.4 does not have any CSRF checks in place when saving its settings, and do not validate or escape them, which could lead to Stored Cross-Site Scripting issue.

The Wechat Reward WordPress plugin through 1.7 does not sanitise or escape its QR settings, nor has any CSRF check in place, allowing attackers to make a logged in admin change the settings and perform Cross-Site Scripting attacks.

CakePHP is a rapid development framework for PHP. The PaginatorHelper::limitControl() method has a cross-site-scripting vulnerability via query string parameter manipulation. This issue has been fixed in 5.2.12 and 5.3.1.

EqualWeb Accessibility Widget 2.0.0, 2.0.1, 2.0.2, 2.0.3, 2.0.4, 2.1.10, 3.0.0, 3.0.1, 3.0.2, 4.0.0, and 4.0.1 allows DOM XSS due to improper validation of message events to accessibility.js.

The Mime Types Extended WordPress plugin through 0.11 does not sanitise uploaded SVG files, which could allow users with a role as low as Author to upload a malicious SVG containing XSS payloads.

Ideagen DevonWay contains a stored cross site scripting vulnerability. A remote, authenticated attacker could craft a payload in the 'Reports' page that executes when another user views the report. Fixed in 2.62.4 and 2.62 LTS.

OPEXUS eCASE Audit allows an authenticated attacker to save JavaScript in the "A or SIC Number" field within the Project Setup functionality. The JavaScript is executed whenever another user views the project. Fixed in OPEXUS eCASE Audit 11.14.2.0.

OPEXUS eCASE Audit allows an authenticated attacker to save JavaScript as a comment in the "Estimated Staff Hours" field. The JavaScript is executed whenever another user visits the Project Cost tab. Fixed in OPEXUS eCASE Audit 11.14.2.0.

Prior to this patch being applied, Mautic's tracking was vulnerable to Cross-Site Scripting through the Page URL variable.

A vulnerability was found in rickxy Stock Management System. It has been declared as problematic. This vulnerability affects unknown code of the file /pages/processlogin.php. The manipulation of the argument user leads to cross site scripting. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-214324.

A vulnerability in the web-based management interface of Cisco Packaged Contact Center Enterprise could allow an unauthenticated, remote attacker to conduct a stored XSS attack against a user of the interface. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit this vulnerability by persuading a user of the interface to click a customized link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or access sensitive browser-based information.

Multiple cross-site scripting (XSS) vulnerabilities in CyberBuild allow remote attackers to inject arbitrary web script or HTML via the (1) SessionID parameter to login.asp, (2) ProductIndex parameter to browse0.htm, (3) rowcolor parameter to result.asp, or (4) heading parameter to result.asp. NOTE: vectors 1 and 2 might be resultant from SQL injection.

silverstripe-asset-admin is a silverstripe assets gallery for asset management. When using the "insert media" functionality, the linked oEmbed JSON includes an HTML attribute which will replace the embed shortcode. The HTML is not sanitized before replacing the shortcode, allowing a script payload to be executed on both the CMS and the front-end of the website. This issue has been addressed in silverstripe/framework version 5.3.8 and users are advised to upgrade. There are no known workarounds for this vulnerability.

DO NOT USE THIS CANDIDATE NUMBER. Reason: This candidate was issued in error. Notes: All references and descriptions in this candidate have been removed to prevent accidental usage.

DO NOT USE THIS CANDIDATE NUMBER. Reason: This candidate was issued in error. Notes: All references and descriptions in this candidate have been removed to prevent accidental usage.

Craft is a content management system (CMS). Craft CMS 5 stored XSS can be triggered by the breadcrumb list and title fields with user input.

The Rank Math SEO WordPress plugin before 1.0.219 does not sanitise and escape some of its settings, which could allow users with access to the General Settings (by default admin, however such access can be given to lower roles via the Role Manager feature of the Rank Math SEO WordPress plugin before 1.0.219) to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup).

A reflected cross-site scripting (XSS) vulnerability in ePO prior to 5.10 Update 14 allows a remote unauthenticated attacker to potentially obtain access to an ePO administrator's session by convincing the authenticated ePO administrator to click on a carefully crafted link. This would lead to limited access to sensitive information and limited ability to alter some information in ePO.

Jenkins buildgraph-view Plugin 1.8 and earlier does not escape the build URL, resulting in a stored cross-site scripting (XSS) vulnerability exploitable by attackers able to configure jobs or views.

Affected versions of this package are vulnerable to Cross-site Scripting (XSS) via the main functionality. It accepts input that can result in the output (an anchor a tag) containing undesirable Javascript code that can be executed upon user interaction.

This affects all versions of package pekeupload. If an attacker induces a user to upload a file whose name contains javascript code, the javascript code will be executed.

IBM CICS TX Standard and Advanced 11.1 is vulnerable to HTML injection. A remote attacker could inject malicious HTML code, which when viewed, would be executed in the victim's Web browser within the security context of the hosting site. IBM X-Force ID: 229330.

This affects the package tempura before 0.4.0. If the input to the esc function is of type object (i.e an array) it is returned without being escaped/sanitized, leading to a potential Cross-Site Scripting vulnerability.

Improper neutralization of input during web page generation ('cross-site scripting') in Microsoft Office SharePoint allows an authorized attacker to perform spoofing over a network.

AEM's Cloud Service offering, as well as version 6.5.10.0 (and below) are affected by a reflected Cross-Site Scripting (XSS) vulnerability via the itemResourceType parameter. If an attacker is able to convince a victim to visit a URL referencing a vulnerable page, malicious JavaScript content may be executed within the context of the victim's browser

Improper neutralization of input during web page generation ('cross-site scripting') in Microsoft Exchange Server allows an unauthorized attacker to perform spoofing over a network.

Improper neutralization of input during web page generation ('cross-site scripting') in Microsoft Office SharePoint allows an authorized attacker to perform spoofing over a network.

svelte performance oriented web framework. A potential mXSS vulnerability exists in Svelte for versions up to but not including 4.2.19. Svelte improperly escapes HTML on server-side rendering. The assumption is that attributes will always stay as such, but in some situation the final DOM tree rendered on browsers is different from what Svelte expects on server-side rendering. This may be leveraged to perform XSS attacks, and a type of the XSS is known as mXSS (mutation XSS). More specifically, this can occur when injecting malicious content into an attribute within a `noscript` tag. This issue has been addressed in release version 4.2.19. Users are advised to upgrade. There are no known workarounds for this vulnerability.