Adobe Flash Player before 18.0.0.366 and 19.x through 22.x before 22.0.0.209 on Windows and OS X and before 11.2.202.632 on Linux allows attackers to obtain sensitive information from process memory via unspecified vectors.

IBM Security Access Manager for Web could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques.

Under non-standard configurations, IBM WebSphere MQ might send password data in clear text over the network. This data could be intercepted using man in the middle techniques.

The CLI in npm before 2.15.1 and 3.x before 3.8.3, as used in Node.js 0.10 before 0.10.44, 0.12 before 0.12.13, 4 before 4.4.2, and 5 before 5.10.0, includes bearer tokens with arbitrary requests, which allows remote HTTP servers to obtain sensitive information by reading Authorization headers.

IBM BigFix Remote Control before 9.1.3 does not properly restrict the set of available encryption algorithms, which makes it easier for remote attackers to defeat cryptographic protection mechanisms by sniffing the network and performing calculations on encrypted data.

In the IPv6 implementation in the Linux kernel before 5.13.3, net/ipv6/output_core.c has an information leak because of certain use of a hash table which, although big, doesn't properly consider that IPv6-based attackers can typically choose among many IPv6 source addresses.

The ksmbd server through 3.4.2, as used in the Linux kernel through 5.15.8, sometimes communicates in cleartext even though encryption has been enabled. This occurs because it sets the SMB2_GLOBAL_CAP_ENCRYPTION flag when using the SMB 3.1.1 protocol, which is a violation of the SMB protocol specification. When Windows 10 detects this protocol violation, it disables encryption.

IBM TXSeries for Multiplatforms 8.2 transmits or stores authentication credentials, but it uses an insecure method that is susceptible to unauthorized interception and/or retrieval. IBM X-Force ID: 280192.

Sensitive information disclosure due to insecure folder permissions. The following products are affected: Acronis Cyber Protect 15 (Linux) before build 29240, Acronis Agent (Linux) before build 28037

IBM UrbanCode Deploy 6.0.x before 6.0.1.13, 6.1.x before 6.1.3.3, and 6.2.x before 6.2.1.1, when agent-relay Codestation artifact caching is enabled, allows remote attackers to bypass authentication and obtain sensitive artifact information via unspecified vectors.

WebReports in IBM BigFix Platform (formerly Tivoli Endpoint Manager) 9.x before 9.5.2 allows remote attackers to obtain sensitive information by sniffing the network for HTTP traffic.

GSKit in IBM Security Network Protection 5.3.1 before 5.3.1.7 and 5.3.2 allows remote attackers to discover credentials by triggering an MD5 collision.

IBM WebSphere Application Server (WAS) 7.0 before 7.0.0.41, 8.0 before 8.0.0.13, and 8.5 before 8.5.5.10, when FIPS 140-2 is enabled, misconfigures TLS, which allows man-in-the-middle attackers to obtain sensitive information via unspecified vectors.

Cleartext transmission of sensitive information. The following products are affected: Acronis Cyber Protect 15 (Windows) before build 29240

IBM Guardium Data Encryption (GDE) 5.0.0.2 and 5.0.0.3 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. IBM X-Force ID: 213964.

Cleartext transmission of sensitive information. The following products are affected: Acronis Cyber Protect 15 (Linux, Windows) before build 29240

IBM Sterling Connect:Direct Web Services 1.0 and 6.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 209508.

IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, 11.1, and 11.5 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

IBM Security Guardium 10.5 and 11.3 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt sensitive information. IBM X-Force ID: 215585.

IBM Tivoli Key Lifecycle Manager 3.0, 3.0.1, 4.0, and 4.1 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. IBM X-Force ID: 212783.

IBM Sterling Connect:Direct for UNIX 1.5 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 210574.

IBM QRadar SIEM 7.3, 7.4, and 7.5 in some senarios may reveal authorized service tokens to other QRadar users. IBM X-Force ID: 210021

IBM Sterling Connect:Direct Web Services 1.0 and 6.0 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 209507.

IBM Cognos Analytics Mobile for Android 1.1.14 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

IBM Sterling B2B Integrator Standard Edition 5.2.0. 0 through 6.1.1.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 210171.

IBM PowerVM Hypervisor FW860, FW940, FW950, and FW1010, through a specific sequence of VM management operations could lead to a violation of the isolation between peer VMs. IBM X-Force ID: 210019.

In the Linux kernel, the following vulnerability has been resolved: block: Fix wrong offset in bio_truncate() bio_truncate() clears the buffer outside of last block of bdev, however current bio_truncate() is using the wrong offset of page. So it can return the uninitialized data. This happened when both of truncated/corrupted FS and userspace (via bdev) are trying to read the last of bdev.

IBM Security Verify Governance Identity Manager 10.0.2 could allow a remote attacker to obtain sensitive information when detailed technical error messages are returned. This information could be used in further attacks against the system.

An Information Disclosure vulnerability exists in HP SiteScope 11.2 and 11.3 on Windows, Linux and Solaris, HP Asset Manager 9.30 through 9.32, 9.40 through 9.41, 9.50, and Asset Manager Cloudsystem Chargeback 9.40, which could let a remote malicious user obtain sensitive information. This is the TLS vulnerability known as the RC4 cipher Bar Mitzvah vulnerability.

IBM PowerSC 1.3, 2.0, and 2.1 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 275129.

IBM PowerSC 1.3, 2.0, and 2.1 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 275117.

IBM PowerSC 1.3, 2.0, and 2.1 MFA does not implement the "HTTP Strict Transport Security" (HSTS) web security policy mechanism. IBM X-Force ID: 276004.

IBM PowerSC 1.3, 2.0, and 2.1 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 275107.

Generation of Error Message Containing Sensitive Information vulnerability in Hitachi Device Manager on Windows, Linux (Device Manager Agent modules).This issue affects Hitachi Device Manager: before 8.8.5-04.

In the Message Entry and Repair (MER) facility of IBM Financial Transaction Manager for SWIFT Services 3.2.4 the sending address and the message type of FIN messages are assumed to be immutable. However, an attacker might modify these elements of a business transaction. IBM X-Force ID: 273183.

IBM CICS Transaction Gateway for Multiplatforms 9.2 and 9.3 transmits or stores authentication credentials, but it uses an insecure method that is susceptible to unauthorized interception and/or retrieval.

Missing Password Field Masking vulnerability in Hitachi Device Manager on Windows, Linux (Device Manager Agent component).This issue affects Hitachi Device Manager: before 8.8.5-04.

The Network Address Translation (NAT) capability for Netfilter ("iptables") 1.2.6a and earlier leaks translated IP addresses in ICMP error messages.

In Octopus Server after version 2018.8.2 if the Octopus Server Web Request Proxy is configured with authentication, the password is shown in plaintext in the UI.

IBM Security Guardium Key Lifecycle Manager 4.3 contains plain text hard-coded credentials or other secrets in source code repository. IBM X-Force ID: 271220.

IBM QRadar Suite Software 1.10.12.0 through 1.10.22.0 and IBM Cloud Pak for Security 1.10.0.0 through 1.10.11.0 could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned in the request. This information could be used in further attacks against the system. IBM X-Force ID: 272201.

IBM Security Guardium Insights 3.0 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques.

IBM Security SOAR uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

IBM InfoSphere Information Server 11.7 could allow a remote attacker to obtain highly sensitive information due to a vulnerability in the authentication mechanism. IBM X-Force ID: 201775.

IBM Db2 for Linux, UNIX and Windows (includes Db2 Connect Server) could disclose sensitive information when using ADMIN_CMD with LOAD or BACKUP. IBM X-Force ID: 204470.

IBM Security Identity Manager 7.0.2 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 200252.

IBM QRadar SIEM 7.3 and 7.4 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 201778.

IBM QRadar SIEM 7.3 and 7.4 could allow an attacker to obtain sensitive information due to the server performing key exchange without entity authentication on inter-host communications using man in the middle techniques. IBM X-Force ID: 203033.

IBM PowerVM Hypervisor FW940 and FW950 could allow an attacker to obtain sensitive information if they gain service access to the FSP. IBM X-Force ID: 202476.

IBM Sterling Secure Proxy 6.0.1, 6.0.2, 2.4.3.2, and 3.4.3.2 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-ForceID: 201100.