In Pillow before 7.1.0, there are two Buffer Overflows in libImaging/TiffDecode.c.

Buffer overflow in the lldp_decode function in daemon/protocols/lldp.c in lldpd before 0.8.0 allows remote attackers to cause a denial of service (daemon crash) and possibly execute arbitrary code via vectors involving large management addresses and TLV boundaries.

Buffer overflow in the afReadFrames function in audiofile (aka libaudiofile and Audio File Library) allows user-assisted remote attackers to cause a denial of service (program crash) or possibly execute arbitrary code via a crafted audio file, as demonstrated by sixteen-stereo-to-eight-mono.c.

Buffer overflow in the mipsnet_receive function in hw/net/mipsnet.c in QEMU, when the guest NIC is configured to accept large packets, allows remote attackers to cause a denial of service (memory corruption and QEMU crash) or possibly execute arbitrary code via a packet larger than 1514 bytes.

The dtls1_reassemble_fragment function in d1_both.c in OpenSSL before 0.9.8za, 1.0.0 before 1.0.0m, and 1.0.1 before 1.0.1h does not properly validate fragment lengths in DTLS ClientHello messages, which allows remote attackers to execute arbitrary code or cause a denial of service (buffer overflow and application crash) via a long non-initial fragment.

Liblouis through 3.21.0 has a buffer overflow in compilePassOpcode in compileTranslationTable.c (called, indirectly, by tools/lou_checktable.c).

Rsyslog is a rocket-fast system for log processing. Modules for TCP syslog reception have a potential heap buffer overflow when octet-counted framing is used. This can result in a segfault or some other malfunction. As of our understanding, this vulnerability can not be used for remote code execution. But there may still be a slight chance for experts to do that. The bug occurs when the octet count is read. While there is a check for the maximum number of octets, digits are written to a heap buffer even when the octet count is over the maximum, This can be used to overrun the memory buffer. However, once the sequence of digits stop, no additional characters can be added to the buffer. In our opinion, this makes remote exploits impossible or at least highly complex. Octet-counted framing is one of two potential framing modes. It is relatively uncommon, but enabled by default on receivers. Modules `imtcp`, `imptcp`, `imgssapi`, and `imhttp` are used for regular syslog message reception. It is best practice not to directly expose them to the public. When this practice is followed, the risk is considerably lower. Module `imdiag` is a diagnostics module primarily intended for testbench runs. We do not expect it to be present on any production installation. Octet-counted framing is not very common. Usually, it needs to be specifically enabled at senders. If users do not need it, they can turn it off for the most important modules. This will mitigate the vulnerability.

Buffer overflow in ngx_http_mp4_module.c in the ngx_http_mp4_module module in nginx 1.0.7 through 1.0.14 and 1.1.3 through 1.1.18, when the mp4 directive is used, allows remote attackers to cause a denial of service (memory overwrite) or possibly execute arbitrary code via a crafted MP4 file.

BIND servers are vulnerable if they are running an affected version and are configured to use GSS-TSIG features. In a configuration which uses BIND's default settings the vulnerable code path is not exposed, but a server can be rendered vulnerable by explicitly setting valid values for the tkey-gssapi-keytab or tkey-gssapi-credentialconfiguration options. Although the default configuration is not vulnerable, GSS-TSIG is frequently used in networks where BIND is integrated with Samba, as well as in mixed-server environments that combine BIND servers with Active Directory domain controllers. The most likely outcome of a successful exploitation of the vulnerability is a crash of the named process. However, remote code execution, while unproven, is theoretically possible. Affects: BIND 9.5.0 -> 9.11.27, 9.12.0 -> 9.16.11, and versions BIND 9.11.3-S1 -> 9.11.27-S1 and 9.16.8-S1 -> 9.16.11-S1 of BIND Supported Preview Edition. Also release versions 9.17.0 -> 9.17.1 of the BIND 9.17 development branch

Buffer overflow in readDataVar in hdf/dataobject.c in Symonics libmysofa 0.5 - 1.1 allows attackers to execute arbitrary code via a crafted SOFA.

A flaw was found in OpenJPEG’s encoder. This flaw allows an attacker to pass specially crafted x,y offset input to OpenJPEG to use during encoding. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability.

url.cpp in libproxy through 0.4.15 is prone to a buffer overflow when PAC is enabled, as demonstrated by a large PAC file that is delivered without a Content-length header.

Buffer Overflow in Graphviz Graph Visualization Tools from commit ID f8b9e035 and earlier allows remote attackers to execute arbitrary code or cause a denial of service (application crash) by loading a crafted file into the "lib/common/shapes.c" component.

A buffer overflow vulnerability in CDataList of the jwwlib component of LibreCAD 2.2.0-rc3 and older allows an attacker to achieve Remote Code Execution using a crafted JWW document.

Teeworlds up to and including 0.7.5 is vulnerable to Buffer Overflow. A map parser does not validate m_Channels value coming from a map file, leading to a buffer overflow. A malicious server may offer a specially crafted map that will overwrite client's stack causing denial of service or code execution.

Buffer overflow in libpng 1.0.x before 1.0.55, 1.2.x before 1.2.45, 1.4.x before 1.4.8, and 1.5.x before 1.5.4, when used by an application that calls the png_rgb_to_gray function but not the png_set_expand function, allows remote attackers to overwrite memory with an arbitrary amount of data, and possibly have unspecified other impact, via a crafted PNG image.

sysstat is a set of system performance tools for the Linux operating system. On 32 bit systems, in versions 9.1.16 and newer but prior to 12.7.1, allocate_structures contains a size_t overflow in sa_common.c. The allocate_structures function insufficiently checks bounds before arithmetic multiplication, allowing for an overflow in the size allocated for the buffer representing system activities. This issue may lead to Remote Code Execution (RCE). This issue has been patched in version 12.7.1.

Lout 3.40 has a buffer overflow in the StringQuotedWord() function in z39.c.

A buffer overflow in the fribidi_get_par_embedding_levels_ex() function in lib/fribidi-bidi.c of GNU FriBidi through 1.0.7 allows an attacker to cause a denial of service or possibly execute arbitrary code by delivering crafted text content to a user, when this content is then rendered by an application that uses FriBidi for text layout calculations. Examples include any GNOME or GTK+ based application that uses Pango for text layout, as this internally uses FriBidi for bidirectional text layout. For example, the attacker can construct a crafted text file to be opened in GEdit, or a crafted IRC message to be viewed in HexChat.

When reading data from disk, the grub's UDF filesystem module utilizes the user controlled data length metadata to allocate its internal buffers. In certain scenarios, while iterating through disk sectors, it assumes the read size from the disk is always smaller than the allocated buffer size which is not guaranteed. A crafted filesystem image may lead to a heap-based buffer overflow resulting in critical data to be corrupted, resulting in the risk of arbitrary code execution by-passing secure boot protections.

In the ffghbn function in NASA CFITSIO 3.42, specially crafted images parsed via the library can cause a stack-based buffer overflow overwriting arbitrary data. An attacker can deliver an FIT image to trigger this vulnerability and potentially gain code execution.

In the ffghtb function in NASA CFITSIO 3.42, specially crafted images parsed via the library can cause a stack-based buffer overflow overwriting arbitrary data. An attacker can deliver an FIT image to trigger this vulnerability and potentially gain code execution.

In the ffgphd and ffgtkn functions in NASA CFITSIO 3.42, specially crafted images parsed via the library can cause a stack-based buffer overflow overwriting arbitrary data. An attacker can deliver an FIT image to trigger this vulnerability and potentially gain code execution.

There is an illegal WRITE memory access at caca/file.c (function caca_file_read) in libcaca 0.99.beta19.

Multiple buffer overflows in the (1) recognize_eps_file function (src/psgen.c) and (2) tilde_subst function (src/util.c) in GNU enscript 1.6.1, and possibly earlier, might allow remote attackers to execute arbitrary code via an epsf escape sequence with a long filename.

There is an illegal WRITE memory access at common-image.c (function load_image) in libcaca 0.99.beta19 for 4bpp data.

Use After Free in GitHub repository vim/vim prior to 9.0.

There is an illegal WRITE memory access at common-image.c (function load_image) in libcaca 0.99.beta19 for 1bpp data.

containerd is a container runtime. A bug was found in containerd versions prior to 1.4.8 and 1.5.4 where pulling and extracting a specially-crafted container image can result in Unix file permission changes for existing files in the host’s filesystem. Changes to file permissions can deny access to the expected owner of the file, widen access to others, or set extended bits like setuid, setgid, and sticky. This bug does not directly allow files to be read, modified, or executed without an additional cooperating process. This bug has been fixed in containerd 1.5.4 and 1.4.8. As a workaround, ensure that users only pull images from trusted sources. Linux security modules (LSMs) like SELinux and AppArmor can limit the files potentially affected by this bug through policies and profiles that prevent containerd from interacting with specific files.

Nextcloud Server is a Nextcloud package that handles data storage. In versions prior to 19.0.13, 20.0.11, and 21.0.3, filenames where not escaped by default in controllers using `DownloadResponse`. When a user-supplied filename was passed unsanitized into a `DownloadResponse`, this could be used to trick users into downloading malicious files with a benign file extension. This would show in UI behaviours where Nextcloud applications would display a benign file extension (e.g. JPEG), but the file will actually be downloaded with an executable file extension. The vulnerability is patched in versions 19.0.13, 20.0.11, and 21.0.3. Administrators of Nextcloud instances do not have a workaround available, but developers of Nextcloud apps may manually escape the file name before passing it into `DownloadResponse`.

fail2ban is a daemon to ban hosts that cause multiple authentication errors. In versions 0.9.7 and prior, 0.10.0 through 0.10.6, and 0.11.0 through 0.11.2, there is a vulnerability that leads to possible remote code execution in the mailing action mail-whois. Command `mail` from mailutils package used in mail actions like `mail-whois` can execute command if unescaped sequences (`\n~`) are available in "foreign" input (for instance in whois output). To exploit the vulnerability, an attacker would need to insert malicious characters into the response sent by the whois server, either via a MITM attack or by taking over a whois server. The issue is patched in versions 0.10.7 and 0.11.3. As a workaround, one may avoid the usage of action `mail-whois` or patch the vulnerability manually.

An issue was discovered in the Binary File Descriptor (BFD) library (aka libbfd), as distributed in GNU Binutils through 2.31. There is a heap-based buffer overflow in bfd_elf32_swap_phdr_in in elfcode.h because the number of program headers is not restricted.

The pe_bfd_read_buildid function in peicode.h in the Binary File Descriptor (BFD) library (aka libbfd), as distributed in GNU Binutils 2.29.1, does not validate size and offset values in the data dictionary, which allows remote attackers to cause a denial of service (segmentation violation and application crash) or possibly have unspecified other impact via a crafted PE file.

PHPMailer before 5.2.27 and 6.x before 6.0.6 is vulnerable to an object injection attack.

An issue was discovered in PSPP 1.2.0. There is a heap-based buffer overflow at the function read_bytes_internal in utilities/pspp-dump-sav.c, which allows attackers to cause a denial of service (application crash) or possibly have unspecified other impact.

An issue has been found in Mini-XML (aka mxml) 2.12. It is a stack-based buffer overflow in mxml_write_node in mxml-file.c via vectors involving a double-precision floating point number and the '<order type="real">' substring, as demonstrated by testmxml.

The get_count function in cplus-dem.c in GNU libiberty, as distributed in GNU Binutils 2.31, allows remote attackers to cause a denial of service (malloc called with the result of an integer-overflowing calculation) or possibly have unspecified other impact via a crafted string, as demonstrated by c++filt.

Integer overflow in the rtl_allocateMemory function in sal/rtl/source/alloc_global.c in the memory allocator in OpenOffice.org (OOo) 2.4.1, on 64-bit platforms, allows remote attackers to cause a denial of service (application crash) or possibly execute arbitrary code via a crafted document, related to a "numeric truncation error," a different vulnerability than CVE-2008-2152.

When reading data from a hfs filesystem, grub's hfs filesystem module uses user-controlled parameters from the filesystem metadata to calculate the internal buffers size, however it misses to properly check for integer overflows. A maliciouly crafted filesystem may lead some of those buffer size calculation to overflow, causing it to perform a grub_malloc() operation with a smaller size than expected. As a result the hfsplus_open_compressed_real() function will write past of the internal buffer length. This flaw may be leveraged to corrupt grub's internal critical data and may result in arbitrary code execution by-passing secure boot protections.

Emacs 21 and XEmacs automatically load and execute .flc (fast lock) files that are associated with other files that are edited within Emacs, which allows user-assisted attackers to execute arbitrary code.

A heap buffer overflow vulnerability in msadpcm_decode_block of libsndfile 1.0.30 allows attackers to execute arbitrary code via a crafted WAV file.

A flaw was found in libcaca. A heap buffer overflow in export.c in function export_tga might lead to memory corruption and other potential consequences.

The *_get_synthetic_symtab functions in the Binary File Descriptor (BFD) library (aka libbfd), as distributed in GNU Binutils 2.29, interpret a -1 value as a sorting count instead of an error flag, which allows remote attackers to cause a denial of service (integer overflow and application crash) or possibly have unspecified other impact via a crafted ELF file, related to elf32-i386.c and elf64-x86-64.c.

Use after free in Bookmarks in Google Chrome prior to 91.0.4472.77 allowed an attacker who convinced a user to install a malicious extension to potentially exploit heap corruption via a crafted HTML page.

Incorrect security UI in Web App Installs in Google Chrome on Android prior to 90.0.4430.212 allowed an attacker who convinced a user to install a web application to inject scripts or HTML into a privileged page via a crafted HTML page.

Use after free in Autofill in Google Chrome prior to 91.0.4472.101 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page.

Use after free in Permissions in Google Chrome prior to 93.0.4577.82 allowed a remote attacker who had compromised the renderer process to potentially exploit heap corruption via a crafted HTML page.

Use after free in Extensions in Google Chrome prior to 91.0.4472.101 allowed a remote attacker who had compromised the renderer process to potentially exploit heap corruption via a crafted HTML page.

Chromium: CVE-2021-30623 Use after free in Bookmarks