In WAGO I/O-Check Service in multiple products an attacker can send a specially crafted packet containing OS commands to crash the diagnostic tool and write memory.
D-Link DIR-809 devices with firmware through DIR-809Ax_FW1.12WWB03_20190410 were discovered to contain a stack buffer overflow vulnerability in the function sub_80046EB4 in /formSetPortTr. This vulnerability is triggered via a crafted POST request.
A remote execution of arbitrary code vulnerability was discovered in ArubaOS-Switch Devices version(s): ArubaOS-Switch 15.xx.xxxx: All versions; ArubaOS-Switch 16.01.xxxx: All versions; ArubaOS-Switch 16.02.xxxx: K.16.02.0033 and below; ArubaOS-Switch 16.03.xxxx: All versions; ArubaOS-Switch 16.04.xxxx: All versions; ArubaOS-Switch 16.05.xxxx: All versions; ArubaOS-Switch 16.06.xxxx: All versions; ArubaOS-Switch 16.07.xxxx: All versions; ArubaOS-Switch 16.08.xxxx: KB/WB/WC/YA/YB/YC.16.08.0024 and below; ArubaOS-Switch 16.09.xxxx: KB/WB/WC/YA/YB/YC.16.09.0019 and below; ArubaOS-Switch 16.10.xxxx: KB/WB/WC/YA/YB/YC.16.10.0019 and below; ArubaOS-Switch 16.11.xxxx: KB/WB/WC/YA/YB/YC.16.11.0003 and below. Aruba has released upgrades for ArubaOS-Switch Devices that address these security vulnerabilities.
Adobe Photoshop CC 2019 versions 20.0.8 and earlier, and Photoshop 2020 versions 21.1 and earlier have a memory corruption vulnerability. Successful exploitation could lead to arbitrary code execution.
D-Link DIR-809 devices with firmware through DIR-809Ax_FW1.12WWB03_20190410 were discovered to contain a stack buffer overflow vulnerability in the function FUN_800462c4 in /formAdvFirewall. This vulnerability is triggered via a crafted POST request.
ALGO 8180 IP Audio Alerter SIP INVITE Alert-Info Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of ALGO 8180 IP Audio Alerter devices. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the Alert-Info header of SIP INVITE requests. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-28301.
D-Link DIR-809 devices with firmware through DIR-809Ax_FW1.12WWB03_20190410 were discovered to contain a stack buffer overflow vulnerability in the function FUN_8004776c in /formVirtualServ. This vulnerability is triggered via a crafted POST request.
A vulnerability was determined in Tenda CH22 1.0.0.1. Affected by this issue is the function fromIpsecitem of the file /goform/IPSECsave of the component httpd. Executing manipulation of the argument ipsecno can lead to stack-based buffer overflow. The attack may be performed from remote.
TP-Link TL-WR941ND V6 were discovered to contain a buffer overflow via the pSize parameter at /userRpm/PingIframeRpm.
A weakness has been identified in Tenda AC20 16.03.08.05. This vulnerability affects unknown code of the file /goform/fromAdvSetMacMtuWan. This manipulation of the argument wanMTU causes stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be exploited.
Buffer overflow in XML processing of XPS file in Small Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code. *: Satera LBP670C Series/Satera MF750C Series firmware v06.02 and earlier sold in Japan.Color imageCLASS LBP630C/Color imageCLASS MF650C Series/imageCLASS LBP230 Series/imageCLASS X LBP1238 II/imageCLASS MF450 Series/imageCLASS X MF1238 II/imageCLASS X MF1643i II/imageCLASS X MF1643iF II firmware v06.02 and earlier sold in US.i-SENSYS LBP630C Series/i-SENSYS MF650C Series/i-SENSYS LBP230 Series/1238P II/1238Pr II/i-SENSYS MF450 Series/i-SENSYS MF550 Series/1238i II/1238iF II/imageRUNNER 1643i II/imageRUNNER 1643iF II firmware v06.02 and earlier sold in Europe.
A vulnerability was found in Tenda AC20 16.03.08.12. This vulnerability affects the function save_virtualser_data of the file /goform/formSetVirtualSer. The manipulation of the argument list leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.
D-Link DIR-809 devices with firmware through DIR-809Ax_FW1.12WWB03_20190410 were discovered to contain a stack buffer overflow vulnerability in the function FUN_80034d60 in /formStaticDHCP. This vulnerability is triggered via a crafted POST request.
An issue was discovered in HCC embedded InterNiche 4.0.1. A potential heap buffer overflow exists in the code that parses the HTTP POST request, due to lack of size validation. This vulnerability requires the attacker to send a crafted HTTP POST request with a URI longer than 50 bytes. This leads to a heap overflow in wbs_post() via an strcpy() call.
An issue was discovered on Tenda AC11 devices with firmware through 02.03.01.104_CN. A stack buffer overflow vulnerability in /gofrom/setwanType allows attackers to execute arbitrary code on the system via a crafted post request. This occurs when input vector controlled by malicious attack get copied to the stack variable.
Adobe Photoshop CC 2019 versions 20.0.8 and earlier, and Photoshop 2020 versions 21.1 and earlier have a memory corruption vulnerability. Successful exploitation could lead to arbitrary code execution.
Buffer overflow in Address Book attribute tag processing on Small Office Multifunction Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code. *: Satera LBP670C Series/Satera MF750C Series firmware v06.02 and earlier sold in Japan.Color imageCLASS LBP630C/Color imageCLASS MF650C Series/imageCLASS LBP230 Series/imageCLASS X LBP1238 II/imageCLASS MF450 Series/imageCLASS X MF1238 II/imageCLASS X MF1643i II/imageCLASS X MF1643iF II firmware v06.02 and earlier sold in US.i-SENSYS LBP630C Series/i-SENSYS MF650C Series/i-SENSYS LBP230 Series/1238P II/1238Pr II/i-SENSYS MF450 Series/i-SENSYS MF550 Series/1238i II/1238iF II/imageRUNNER 1643i II/imageRUNNER 1643iF II firmware v06.02 and earlier sold in Europe.
Buffer overflow in XPS font parse processing on Small Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code. *: Satera LBP670C Series/Satera MF750C Series firmware v06.02 and earlier sold in Japan.Color imageCLASS LBP630C/Color imageCLASS MF650C Series/imageCLASS LBP230 Series/imageCLASS X LBP1238 II/imageCLASS MF450 Series/imageCLASS X MF1238 II/imageCLASS X MF1643i II/imageCLASS X MF1643iF II firmware v06.02 and earlier sold in US.i-SENSYS LBP630C Series/i-SENSYS MF650C Series/i-SENSYS LBP230 Series/1238P II/1238Pr II/i-SENSYS MF450 Series/i-SENSYS MF550 Series/1238i II/1238iF II/imageRUNNER 1643i II/imageRUNNER 1643iF II firmware v06.02 and earlier sold in Europe.
Tenda F1203 V2.0.1.6, FH1203 V2.0.1.6 and FH1205 V2.0.0.7(775) were discovered to contain a stack overflow via the ssid parameter in the form_fast_setting_wifi_set function.
A vulnerability has been identified in RUGGEDCOM i800 (All versions < V4.3.7), RUGGEDCOM i801 (All versions < V4.3.7), RUGGEDCOM i802 (All versions < V4.3.7), RUGGEDCOM i803 (All versions < V4.3.7), RUGGEDCOM M2100 (All versions < V4.3.7), RUGGEDCOM M2200 (All versions < V4.3.7), RUGGEDCOM M969 (All versions < V4.3.7), RUGGEDCOM RMC30 (All versions < V4.3.7), RUGGEDCOM RMC8388 V4.X (All versions < V4.3.7), RUGGEDCOM RMC8388 V5.X (All versions < V5.5.4), RUGGEDCOM RP110 (All versions < V4.3.7), RUGGEDCOM RS1600 (All versions < V4.3.7), RUGGEDCOM RS1600F (All versions < V4.3.7), RUGGEDCOM RS1600T (All versions < V4.3.7), RUGGEDCOM RS400 (All versions < V4.3.7), RUGGEDCOM RS401 (All versions < V4.3.7), RUGGEDCOM RS416 (All versions < V4.3.7), RUGGEDCOM RS416P (All versions < V4.3.7), RUGGEDCOM RS416Pv2 V4.X (All versions < V4.3.7), RUGGEDCOM RS416Pv2 V5.X (All versions < V5.5.4), RUGGEDCOM RS416v2 V4.X (All versions < V4.3.7), RUGGEDCOM RS416v2 V5.X (All versions < 5.5.4), RUGGEDCOM RS8000 (All versions < V4.3.7), RUGGEDCOM RS8000A (All versions < V4.3.7), RUGGEDCOM RS8000H (All versions < V4.3.7), RUGGEDCOM RS8000T (All versions < V4.3.7), RUGGEDCOM RS900 (32M) V4.X (All versions < V4.3.7), RUGGEDCOM RS900 (32M) V5.X (All versions < V5.5.4), RUGGEDCOM RS900G (All versions < V4.3.7), RUGGEDCOM RS900G (32M) V4.X (All versions < V4.3.7), RUGGEDCOM RS900G (32M) V5.X (All versions < V5.5.4), RUGGEDCOM RS900GP (All versions < V4.3.7), RUGGEDCOM RS900L (All versions < V4.3.7), RUGGEDCOM RS900W (All versions < V4.3.7), RUGGEDCOM RS910 (All versions < V4.3.7), RUGGEDCOM RS910L (All versions < V4.3.7), RUGGEDCOM RS910W (All versions < V4.3.7), RUGGEDCOM RS920L (All versions < V4.3.7), RUGGEDCOM RS920W (All versions < V4.3.7), RUGGEDCOM RS930L (All versions < V4.3.7), RUGGEDCOM RS930W (All versions < V4.3.7), RUGGEDCOM RS940G (All versions < V4.3.7), RUGGEDCOM RS969 (All versions < V4.3.7), RUGGEDCOM RSG2100 (All versions < V4.3.7), RUGGEDCOM RSG2100 (32M) V4.X (All versions < V4.3.7), RUGGEDCOM RSG2100 (32M) V5.X (All versions < V5.5.4), RUGGEDCOM RSG2100P (All versions < V4.3.7), RUGGEDCOM RSG2100P (32M) V4.X (All versions < V4.3.7), RUGGEDCOM RSG2100P (32M) V5.X (All versions < V5.5.4), RUGGEDCOM RSG2200 (All versions < V4.3.7), RUGGEDCOM RSG2288 V4.X (All versions < V4.3.7), RUGGEDCOM RSG2288 V5.X (All versions < V5.5.4), RUGGEDCOM RSG2300 V4.X (All versions < V4.3.7), RUGGEDCOM RSG2300 V5.X (All versions < V5.5.4), RUGGEDCOM RSG2300P V4.X (All versions < V4.3.7), RUGGEDCOM RSG2300P V5.X (All versions < V5.5.4), RUGGEDCOM RSG2488 V4.X (All versions < V4.3.7), RUGGEDCOM RSG2488 V5.X (All versions < V5.5.4), RUGGEDCOM RSG907R (All versions < V5.5.4), RUGGEDCOM RSG908C (All versions < V5.5.4), RUGGEDCOM RSG909R (All versions < V5.5.4), RUGGEDCOM RSG910C (All versions < V5.5.4), RUGGEDCOM RSG920P V4.X (All versions < V4.3.7), RUGGEDCOM RSG920P V5.X (All versions < V5.5.4), RUGGEDCOM RSL910 (All versions < V5.5.4), RUGGEDCOM RST2228 (All versions < V5.5.4), RUGGEDCOM RST2228P (All versions < V5.5.4), RUGGEDCOM RST916C (All versions < V5.5.4), RUGGEDCOM RST916P (All versions < V5.5.4). The DHCP client in affected devices fails to properly sanitize incoming DHCP packets. This could allow an unauthenticated remote attacker to cause memory to be overwritten, potentially allowing remote code execution.
An issue was discovered on Tenda AC11 devices with firmware through 02.03.01.104_CN. A stack buffer overflow vulnerability in /goform/setportList allows attackers to execute arbitrary code on the system via a crafted post request.
In mjs_json.c in Cesanta MongooseOS mJS 1.26, a maliciously formed JSON string can trigger an off-by-one heap-based buffer overflow in mjs_json_parse, which can potentially lead to redirection of control flow. NOTE: the original reporter disputes the significance of this finding because "there isn’t very much of an opportunity to exploit this reliably for an information leak, so there isn’t any real security impact."
A flaw was found in the gstreamer h264 component of gst-plugins-bad before v1.18.1 where when parsing a h264 header, an attacker could cause the stack to be smashed, memory corruption and possibly code execution.
In Boa, there is a possible escalation of privilege due to a stack buffer overflow. This could lead to remote escalation of privilege from a proximal attacker with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: A20210008; Issue ID: OSBNB00123241.
An issue was discovered in json-c from 20200420 (post 0.14 unreleased code) through 0.15-20200726. A stack-buffer-overflow exists in the auxiliary sample program json_parse which is located in the function parseit.
Out-of-bounds write in cdfs_open_cue_track in libretro libretro-common latest on all platforms allows remote attackers to execute arbitrary code via a crafted .cue file with a file path exceeding PATH_MAX_LENGTH that is copied using memcpy into a fixed-size buffer.
A vulnerability has been identified in APOGEE MBC (PPC) (BACnet) (All versions), APOGEE MBC (PPC) (P2 Ethernet) (All versions), APOGEE MEC (PPC) (BACnet) (All versions), APOGEE MEC (PPC) (P2 Ethernet) (All versions), APOGEE PXC Compact (BACnet) (All versions < V3.5.4), APOGEE PXC Compact (P2 Ethernet) (All versions < V2.8.19), APOGEE PXC Modular (BACnet) (All versions < V3.5.4), APOGEE PXC Modular (P2 Ethernet) (All versions < V2.8.19), Desigo PXC00-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC00-U (All versions >= V2.3 and < V6.30.016), Desigo PXC001-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC100-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC12-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC128-U (All versions >= V2.3 and < V6.30.016), Desigo PXC200-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC22-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC22.1-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC36.1-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC50-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC64-U (All versions >= V2.3 and < V6.30.016), Desigo PXM20-E (All versions >= V2.3 and < V6.30.016), Nucleus NET (All versions), Nucleus ReadyStart V3 (All versions < V2017.02.4), Nucleus Source Code (All versions), TALON TC Compact (BACnet) (All versions < V3.5.4), TALON TC Modular (BACnet) (All versions < V3.5.4). FTP server does not properly validate the length of the “USER” command, leading to stack-based buffer overflows. This may result in Denial-of-Service conditions and Remote Code Execution. (FSMD-2021-0010)
An issue was discovered on Tenda AC11 devices with firmware through 02.03.01.104_CN. A stack buffer overflow vulnerability in /goform/setVLAN allows attackers to execute arbitrary code on the system via a crafted post request.
Tenda FH1203 V2.0.1.6 was discovered to contain a stack overflow via the ssid parameter in the form_fast_setting_wifi_set function.
An issue was discovered on Tenda AC11 devices with firmware through 02.03.01.104_CN. A stack buffer overflow vulnerability in /goform/setmac allows attackers to execute arbitrary code on the system via a crafted post request.
An issue was discovered in Wind River VxWorks before 6.5. There is a possible heap overflow in dhcp client.
An issue was discovered in prog.cgi on D-Link DIR-878 1.30B08 devices. Because strcat is misused, there is a stack-based buffer overflow that does not require authentication.
CODESYS V2 Web-Server before 1.1.9.20 has an Out-of-bounds Write.
A memory corruption vulnerability exists in Palo Alto Networks GlobalProtect portal and gateway interfaces that enables an unauthenticated network-based attacker to disrupt system processes and potentially execute arbitrary code with root privileges. The attacker must have network access to the GlobalProtect interface to exploit this issue. This issue impacts PAN-OS 8.1 versions earlier than PAN-OS 8.1.17. Prisma Access customers are not impacted by this issue.
Improper buffer size validation of DSM packet received can lead to memory corruption in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Wearables
Tenda F1202 V1.0BR_V1.2.0.20(408), FH1202_V1.2.0.19_EN were discovered to contain a stack overflow in the page parameter in the function fromSafeClientFilter.
A memory corruption issue was addressed with improved input validation. This issue is fixed in macOS Big Sur 11.5, Security Update 2021-004 Catalina, Security Update 2021-005 Mojave. An application may be able to execute arbitrary code with kernel privileges.
Tenda AC1206 V15.03.06.23 and AC10 V15.03.06.47 were discovered to contain a stack overflow in the wpapsk_crypto parameter in the fromSetWirelessRepeat function.
CODESYS V2 Web-Server before 1.1.9.20 has a Stack-based Buffer Overflow.
Tenda AC1206 V15.03.06.23, F1202 V1.2.0.20(408), and FH1202 V1.2.0.20(408) were discovered to contain a stack overflow in the page parameter in the fromSetIpBind function.
An issue was discovered in Wind River VxWorks through 6.8. There is a possible stack overflow in dhcp server.
Tenda FH1203 V2.0.1.6 was discovered to contain a stack overflow via the page parameter in the fromAddressNat function.
CODESYS V2 runtime system SP before 2.4.7.55 has a Stack-based Buffer Overflow.
Heap-based buffer overflow in dnsmasq before 2.78 allows remote attackers to cause a denial of service (crash) or execute arbitrary code via a crafted DNS response.
Handlers for *_CFG_PAGE read / write ioctls in the mpr, mps, and mpt drivers allocated a buffer of a caller-specified size, but copied to it a fixed size header. Other heap content would be overwritten if the specified size was too small. Users with access to the mpr, mps or mpt device node may overwrite heap data, potentially resulting in privilege escalation. Note that the device node is only accessible to root and members of the operator group.
Nanopb before 0.3.1 allows size_t overflows in pb_dec_bytes and pb_dec_string.
A stack-based buffer overflow vulnerability has been reported to affect QNAP NAS devices running Surveillance Station. If exploited, this vulnerability allows attackers to execute arbitrary code. QNAP have already fixed this vulnerability in the following versions: Surveillance Station 5.1.5.4.3 (and later) for ARM CPU NAS (64bit OS) and x86 CPU NAS (64bit OS) Surveillance Station 5.1.5.3.3 (and later) for ARM CPU NAS (32bit OS) and x86 CPU NAS (32bit OS)
TOTOLINK X5000R V9.1.0u.6118_B20201102 and TOTOLINK A7000R V9.1.0u.6115_B20201022 was discovered to contain a stack overflow via the File parameter in the function UploadCustomModule.
H3C Magic R200 R200V200R004L02 was discovered to contain a stack overflow via the URL /ihomers/app.
LibreDWG v0.12.3 was discovered to contain a heap-buffer overflow via decode_preR13.