The Network Processing Unit (NPU) in the Cisco Wireless LAN Controller (WLC) before 3.2.171.5, 4.0.x before 4.0.206.0, and 4.1.x allows remote attackers on a local wireless network to cause a denial of service (loss of packet forwarding) via (1) crafted SNAP packets, (2) malformed 802.11 traffic, or (3) packets with certain header length values, aka Bug IDs CSCsg15901 and CSCsh10841.
The wireless web-authentication subsystem on Cisco Wireless LAN Controller (WLC) devices 7.5.x and 7.6.x before 7.6.120 allows remote attackers to cause a denial of service (process crash and device restart) via a crafted value, aka Bug ID CSCum03269.
Unspecified vulnerability in Cisco IOS 12.2SXA, SXB, SXD, and SXF; and the MSFC2, MSFC2a and MSFC3 running in Hybrid Mode on Cisco Catalyst 6000, 6500 and Cisco 7600 series systems; allows remote attackers on a local network segment to cause a denial of service (software reload) via a certain MPLS packet.
Cisco Wireless LAN Controller (WLC) devices with software 7.4(1.1) allow remote attackers to cause a denial of service (wireless-networking outage) via crafted TCP traffic on the local network, aka Bug ID CSCug67104.
The HTTP Profiler on the Cisco Aironet Access Point with software 15.2 and earlier does not properly manage buffers, which allows remote attackers to cause a denial of service (device reload) via crafted HTTP requests, aka Bug ID CSCuc62460.
A vulnerability in the Fibre Channel over Ethernet (FCoE) protocol implementation in Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to an incorrect allocation of an internal interface index. An adjacent attacker with the ability to submit a crafted FCoE packet that crosses affected interfaces could trigger this vulnerability. A successful exploit could allow the attacker to cause a packet loop and high throughput on the affected interfaces, resulting in a DoS condition. This vulnerability has been fixed in version 7.3(5)N1(1).
A vulnerability in 802.11 association request frame processing for the Cisco Aironet 1560, 2800, and 3800 Series Access Points could allow an unauthenticated, Layer 2 radio frequency (RF) adjacent attacker to cause the Access Point (AP) to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient frame validation of the 802.11 association request. An attacker could exploit this vulnerability by sending a malformed 802.11 association request to the targeted device. An exploit could allow the attacker to cause the AP to reload, resulting in a DoS condition while the AP is reloading. This vulnerability affects the following Cisco products running either the Lightweight AP Software or Mobility Express image: Aironet 1560 Series Access Points, Aironet 2800 Series Access Points, Aironet 3800 Series Access Points. Note: The Cisco Aironet 1560 Series Access Point device is supported as of release 8.3.112.0. Cisco Bug IDs: CSCve12189.
A vulnerability in the Cisco Express Forwarding functionality of Cisco IOS XE Software for Cisco ASR 903 Aggregation Services Routers with Route Switch Processor 3 (RSP3C) could allow an unauthenticated, adjacent attacker to trigger a denial of service (DoS) condition. This vulnerability is due to improper memory management when Cisco IOS XE Software is processing Address Resolution Protocol (ARP) messages. An attacker could exploit this vulnerability by sending crafted ARP messages at a high rate over a period of time to an affected device. A successful exploit could allow the attacker to exhaust system resources, which eventually triggers a reload of the active route switch processor (RSP). If a redundant RSP is not present, the router reloads.
A vulnerability in the handling of specific packets that are punted from a line card to a route processor in Cisco IOS XR Software Release 7.9.2 could allow an unauthenticated, adjacent attacker to cause control plane traffic to stop working on multiple Cisco IOS XR platforms. This vulnerability is due to incorrect handling of packets that are punted to the route processor. An attacker could exploit this vulnerability by sending traffic, which must be handled by the Linux stack on the route processor, to an affected device. A successful exploit could allow the attacker to cause control plane traffic to stop working, resulting in a denial of service (DoS) condition.
Cisco IOS XR 5.1 and earlier on Network Convergence System 6000 devices allows remote attackers to cause a denial of service (NPU and card hang or reload) via a malformed MPLS packet, aka Bug ID CSCuq10466.
Unspecified vulnerability in the VLAN Trunking Protocol (VTP) feature in Cisco IOS 12.1(22)EA3 on Catalyst 2950T switches allows remote attackers to cause a denial of service (device reboot) via a crafted Subset-Advert message packet, a different issue than CVE-2006-4774, CVE-2006-4775, and CVE-2006-4776.
The Ethernet Connectivity Fault Management (CFM) handling feature in Cisco IOS 12.2(33)SRE9a and earlier and IOS XE 3.13S and earlier allows remote attackers to cause a denial of service (device reload) via malformed CFM packets, aka Bug ID CSCuq93406.
Cisco IOS XR 4.3(.2) and earlier on ASR 9000 devices does not properly perform NetFlow sampling of IP packets, which allows remote attackers to cause a denial of service (chip and card hangs) via malformed (1) IPv4 or (2) IPv6 packets, aka Bug ID CSCuo68417.
The packet driver in Cisco IOS allows remote attackers to cause a denial of service (device reload) via a series of (1) Virtual Switching Systems (VSS) or (2) Bidirectional Forwarding Detection (BFD) packets, aka Bug IDs CSCug41049 and CSCue61890.
Cisco IOS XR does not properly throttle ICMPv6 redirect packets, which allows remote attackers to cause a denial of service (IPv4 and IPv6 transit outage) via crafted redirect messages, aka Bug ID CSCum14266.
The DHCP implementation in Cisco IOS on Aironet access points does not properly handle error conditions with short leases and unsuccessful lease-renewal attempts, which allows remote attackers to cause a denial of service (device restart) by triggering a transition into a recovery state that was intended to involve a network-interface restart but actually involves a full device restart, aka Bug ID CSCtn16281.
Cisco Adaptive Security Appliance (ASA) Software, when DHCPv6 replay is configured, allows remote attackers to cause a denial of service (device reload) via a crafted DHCPv6 packet, aka Bug ID CSCun45520.
The IP Device Tracking (IPDT) feature in Cisco IOS and IOS XE allows remote attackers to cause a denial of service (IPDT AVL corruption and device reload) via a crafted sequence of ARP packets, aka Bug ID CSCuh38133.
The LLDP implementation in Cisco IOS allows remote attackers to cause a denial of service (device reload) via a malformed packet, aka Bug ID CSCum96282.
Cisco IOS XE on ASR1000 devices, when PPPoE termination is enabled, allows remote attackers to cause a denial of service (device reload) via a malformed PPPoE packet, aka Bug ID CSCuo55180.
A vulnerability in the Layer 2 punt code of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause a queue wedge on an interface that receives specific Layer 2 frames, resulting in a denial of service (DoS) condition. This vulnerability is due to improper handling of certain Layer 2 frames. An attacker could exploit this vulnerability by sending specific Layer 2 frames on the segment the router is connected to. A successful exploit could allow the attacker to cause a queue wedge on the interface, resulting in a DoS condition.
The IPv6 implementation in Cisco NX-OS does not properly handle neighbor-table adjacencies, which allows remote attackers to cause a denial of service (NS processing outage) via a series of malformed packets, aka Bug ID CSCtd15904.
A vulnerability in the DECnet Phase IV and DECnet/OSI protocol processing of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient input validation of DECnet traffic that is received by an affected device. An attacker could exploit this vulnerability by sending DECnet traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.
A vulnerability in the IPv6 protocol handling of the management interfaces of Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause an IPv6 flood on the management interface network of an affected device. The vulnerability exists because the software incorrectly forwards IPv6 packets that have an IPv6 node-local multicast group address destination and are received on the management interfaces. An attacker could exploit this vulnerability by connecting to the same network as the management interfaces and injecting IPv6 packets that have an IPv6 node-local multicast group address destination. A successful exploit could allow the attacker to cause an IPv6 flood on the corresponding network. Depending on the number of Cisco IOS XR Software nodes on that network segment, exploitation could cause excessive network traffic, resulting in network degradation or a denial of service (DoS) condition.
A vulnerability in the Cisco Discovery Protocol implementation for Cisco Video Surveillance 8000 Series IP Cameras could allow an unauthenticated, adjacent attacker to cause an affected IP camera to reload. This vulnerability is due to missing checks when processing Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected IP camera. A successful exploit could allow the attacker to cause the affected IP camera to reload unexpectedly, resulting in a denial of service (DoS) condition. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).
Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition of an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit these vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition on the affected device.
The Ethernet frame-forwarding implementation in Cisco NX-OS on Nexus 7000 devices allows remote attackers to cause a denial of service (forwarding loop and service outage) via a crafted frame, aka Bug ID CSCug47098.
Cisco IOS 12.1T, 12.2, 12.2T, 12.3 and 12.3T, with Multi Protocol Label Switching (MPLS) installed but disabled, allows remote attackers to cause a denial of service (device reload) via a crafted packet sent to the disabled interface.
The mDNS snooping functionality on Cisco Wireless LAN Controller (WLC) devices with software 7.4.1.54 and earlier does not properly manage buffers, which allows remote authenticated users to cause a denial of service (device reload) via crafted mDNS packets, aka Bug ID CSCue04153.
A vulnerability in the Link Layer Discovery Protocol (LLDP) implementation for the Cisco Video Surveillance 7000 Series IP Cameras firmware could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition. This vulnerability is due to improper management of memory resources, referred to as a double free. An attacker could exploit this vulnerability by sending crafted LLDP packets to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: LLDP is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).
Cisco ASR 1000 devices with software before 3.8S, when BDI routing is enabled, allow remote attackers to cause a denial of service (device reload) via crafted (1) broadcast or (2) multicast ICMP packets with fragmentation, aka Bug ID CSCub55948.
Cisco NX-OS 5.2 and 6.1 on Nexus 7000 series switches allows remote attackers to cause a denial of service (process crash or packet loss) via a large number of ARP packets, aka Bug ID CSCtr44822.
Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition of an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit these vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition on the affected device.
A vulnerability in the PROFINET feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause an affected device to crash and reload, resulting in a denial of service (DoS) condition on the device. The vulnerability is due to insufficient processing logic for crafted PROFINET packets that are sent to an affected device. An attacker could exploit this vulnerability by sending crafted PROFINET packets to an affected device for processing. A successful exploit could allow the attacker to cause the device to crash and reload, resulting in a DoS condition on the device.
A vulnerability in Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause a device to reload. The vulnerability is due to incorrect handling of certain valid, but not typical, Ethernet frames. An attacker could exploit this vulnerability by sending the Ethernet frames onto the Ethernet segment. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition.
A vulnerability in the PROFINET handler for Link Layer Discovery Protocol (LLDP) messages of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause a crash on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of LLDP messages in the PROFINET LLDP message handler. An attacker could exploit this vulnerability by sending a malicious LLDP message to an affected device. A successful exploit could allow the attacker to cause the affected device to reload.
Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition of an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit these vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition on the affected device.
A vulnerability in the Cisco Discovery Protocol implementation for Cisco FXOS Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to a missing check when the affected software processes Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to exhaust system memory, causing the device to reload. Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).
A vulnerability in the ARP packet processing of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Security Appliances could allow an unauthenticated, adjacent attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition on an affected device. The vulnerability is due to incorrect processing of ARP packets received by the management interface of an affected device. An attacker could exploit this vulnerability by sending a series of unicast ARP packets in a short timeframe that would reach the management interface of an affected device. A successful exploit could allow the attacker to consume resources on an affected device, which would prevent the device from sending internal system keepalives and eventually cause the device to reload, resulting in a denial of service (DoS) condition.
A vulnerability in Simple Network Management Protocol (SNMP) trap generation for wireless clients of the Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9000 Family could allow an unauthenticated, adjacent attacker to cause the device to unexpectedly reload, causing a denial of service (DoS) condition on an affected device. The vulnerability is due to the lack of input validation of the information used to generate an SNMP trap in relation to a wireless client connection. An attacker could exploit this vulnerability by sending an 802.1x packet with crafted parameters during the wireless authentication setup phase of a connection. A successful exploit could allow the attacker to cause the device to reload, causing a DoS condition.
Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition of an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit these vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition on the affected device.
Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition of an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit these vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition on the affected device.
Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition of an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit these vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition on the affected device.
A vulnerability in the WLAN Local Profiling feature of Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9000 Family could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incorrect parsing of HTTP packets while performing HTTP-based endpoint device classifications. An attacker could exploit this vulnerability by sending a crafted HTTP packet to an affected device. A successful exploit could cause an affected device to reboot, resulting in a DoS condition.
A vulnerability in the Ethernet packet handling of Cisco Aironet Access Points (APs) Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by connecting as a wired client to the Ethernet interface of an affected device and sending a series of specific packets within a short time frame. A successful exploit could allow the attacker to cause a NULL pointer access that results in a reload of the affected device.
A vulnerability in Cisco IOS Software for Cisco Catalyst 6000 Series Switches could allow an unauthenticated, adjacent attacker to cause an affected device to reload unexpectedly. This vulnerability is due to improper handling of process-switched traffic. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition.
A vulnerability in the IP Address Resolution Protocol (ARP) feature of Cisco IOS XE Software for Cisco ASR 1000 Series Aggregation Services Routers with a 20-Gbps Embedded Services Processor (ESP) installed could allow an unauthenticated, adjacent attacker to cause an affected device to reload, resulting in a denial of service condition. The vulnerability is due to insufficient error handling when an affected device has reached platform limitations. An attacker could exploit this vulnerability by sending a malicious series of IP ARP messages to an affected device. A successful exploit could allow the attacker to exhaust system resources, which would eventually cause the affected device to reload.
The Neighbor Discovery (ND) protocol implementation in the IPv6 stack in Cisco IOS 15.3(3)S0.1 on ASR devices mishandles internal tables, which allows remote attackers to cause a denial of service (memory consumption or device crash) via a flood of crafted ND messages, aka Bug ID CSCup28217.
The ARP implementation in Cisco NX-OS on Nexus 1000V devices for VMware vSphere 5.2(1)SV3(1.4), Nexus 3000 devices 7.3(0)ZD(0.47), Nexus 4000 devices 4.1(2)E1, Nexus 9000 devices 7.3(0)ZD(0.61), and MDS 9000 devices 7.0(0)HSK(0.353) and SAN-OS NX-OS on MDS 9000 devices 7.0(0)HSK(0.353) allows remote attackers to cause a denial of service (ARP process restart) via crafted packet-header fields, aka Bug ID CSCut25292.
Cisco IOS 15.2(3)E and earlier and IOS XE 3.6(2)E and earlier allow remote attackers to cause a denial of service (functionality loss) via crafted Cisco Discovery Protocol (CDP) packets, aka Bug ID CSCuu25770.