In the Linux kernel, the following vulnerability has been resolved: RDMA/cma: Fix rdma_resolve_route() memory leak Fix a memory leak when "mda_resolve_route() is called more than once on the same "rdma_cm_id". This is possible if cma_query_handler() triggers the RDMA_CM_EVENT_ROUTE_ERROR flow which puts the state machine back and allows rdma_resolve_route() to be called again.

In the Linux kernel, the following vulnerability has been resolved: iavf: free q_vectors before queues in iavf_disable_vf iavf_free_queues() clears adapter->num_active_queues, which iavf_free_q_vectors() relies on, so swap the order of these two function calls in iavf_disable_vf(). This resolves a panic encountered when the interface is disabled and then later brought up again after PF communication is restored.

In the Linux kernel, the following vulnerability has been resolved: ptp: Fix possible memory leak in ptp_clock_register() I got memory leak as follows when doing fault injection test: unreferenced object 0xffff88800906c618 (size 8): comm "i2c-idt82p33931", pid 4421, jiffies 4294948083 (age 13.188s) hex dump (first 8 bytes): 70 74 70 30 00 00 00 00 ptp0.... backtrace: [<00000000312ed458>] __kmalloc_track_caller+0x19f/0x3a0 [<0000000079f6e2ff>] kvasprintf+0xb5/0x150 [<0000000026aae54f>] kvasprintf_const+0x60/0x190 [<00000000f323a5f7>] kobject_set_name_vargs+0x56/0x150 [<000000004e35abdd>] dev_set_name+0xc0/0x100 [<00000000f20cfe25>] ptp_clock_register+0x9f4/0xd30 [ptp] [<000000008bb9f0de>] idt82p33_probe.cold+0x8b6/0x1561 [ptp_idt82p33] When posix_clock_register() returns an error, the name allocated in dev_set_name() will be leaked, the put_device() should be used to give up the device reference, then the name will be freed in kobject_cleanup() and other memory will be freed in ptp_clock_release().

In the Linux kernel, the following vulnerability has been resolved: mm, slub: fix potential memoryleak in kmem_cache_open() In error path, the random_seq of slub cache might be leaked. Fix this by using __kmem_cache_release() to release all the relevant resources.

In the Linux kernel, the following vulnerability has been resolved: video: fbdev: cirrusfb: check pixclock to avoid divide by zero Do a sanity check on pixclock value to avoid divide by zero. If the pixclock value is zero, the cirrusfb driver will round up pixclock to get the derived frequency as close to maxclock as possible. Syzkaller reported a divide error in cirrusfb_check_pixclock. divide error: 0000 [#1] SMP KASAN PTI CPU: 0 PID: 14938 Comm: cirrusfb_test Not tainted 5.15.0-rc6 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2 RIP: 0010:cirrusfb_check_var+0x6f1/0x1260 Call Trace: fb_set_var+0x398/0xf90 do_fb_ioctl+0x4b8/0x6f0 fb_ioctl+0xeb/0x130 __x64_sys_ioctl+0x19d/0x220 do_syscall_64+0x3a/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: nfs: fix acl memory leak of posix_acl_create() When looking into another nfs xfstests report, I found acl and default_acl in nfs3_proc_create() and nfs3_proc_mknod() error paths are possibly leaked. Fix them in advance.

In the Linux kernel, the following vulnerability has been resolved: mptcp: clear 'kern' flag from fallback sockets The mptcp ULP extension relies on sk->sk_sock_kern being set correctly: It prevents setsockopt(fd, IPPROTO_TCP, TCP_ULP, "mptcp", 6); from working for plain tcp sockets (any userspace-exposed socket). But in case of fallback, accept() can return a plain tcp sk. In such case, sk is still tagged as 'kernel' and setsockopt will work. This will crash the kernel, The subflow extension has a NULL ctx->conn mptcp socket: BUG: KASAN: null-ptr-deref in subflow_data_ready+0x181/0x2b0 Call Trace: tcp_data_ready+0xf8/0x370 [..]

In the Linux kernel, the following vulnerability has been resolved: btrfs: abort in rename_exchange if we fail to insert the second ref Error injection stress uncovered a problem where we'd leave a dangling inode ref if we failed during a rename_exchange. This happens because we insert the inode ref for one side of the rename, and then for the other side. If this second inode ref insert fails we'll leave the first one dangling and leave a corrupt file system behind. Fix this by aborting if we did the insert for the first inode ref.

In the Linux kernel, the following vulnerability has been resolved: KVM: VMX: Always clear vmx->fail on emulation_required Revert a relatively recent change that set vmx->fail if the vCPU is in L2 and emulation_required is true, as that behavior is completely bogus. Setting vmx->fail and synthesizing a VM-Exit is contradictory and wrong: (a) it's impossible to have both a VM-Fail and VM-Exit (b) vmcs.EXIT_REASON is not modified on VM-Fail (c) emulation_required refers to guest state and guest state checks are always VM-Exits, not VM-Fails. For KVM specifically, emulation_required is handled before nested exits in __vmx_handle_exit(), thus setting vmx->fail has no immediate effect, i.e. KVM calls into handle_invalid_guest_state() and vmx->fail is ignored. Setting vmx->fail can ultimately result in a WARN in nested_vmx_vmexit() firing when tearing down the VM as KVM never expects vmx->fail to be set when L2 is active, KVM always reflects those errors into L1. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 21158 at arch/x86/kvm/vmx/nested.c:4548 nested_vmx_vmexit+0x16bd/0x17e0 arch/x86/kvm/vmx/nested.c:4547 Modules linked in: CPU: 0 PID: 21158 Comm: syz-executor.1 Not tainted 5.16.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:nested_vmx_vmexit+0x16bd/0x17e0 arch/x86/kvm/vmx/nested.c:4547 Code: <0f> 0b e9 2e f8 ff ff e8 57 b3 5d 00 0f 0b e9 00 f1 ff ff 89 e9 80 Call Trace: vmx_leave_nested arch/x86/kvm/vmx/nested.c:6220 [inline] nested_vmx_free_vcpu+0x83/0xc0 arch/x86/kvm/vmx/nested.c:330 vmx_free_vcpu+0x11f/0x2a0 arch/x86/kvm/vmx/vmx.c:6799 kvm_arch_vcpu_destroy+0x6b/0x240 arch/x86/kvm/x86.c:10989 kvm_vcpu_destroy+0x29/0x90 arch/x86/kvm/../../../virt/kvm/kvm_main.c:441 kvm_free_vcpus arch/x86/kvm/x86.c:11426 [inline] kvm_arch_destroy_vm+0x3ef/0x6b0 arch/x86/kvm/x86.c:11545 kvm_destroy_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:1189 [inline] kvm_put_kvm+0x751/0xe40 arch/x86/kvm/../../../virt/kvm/kvm_main.c:1220 kvm_vcpu_release+0x53/0x60 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3489 __fput+0x3fc/0x870 fs/file_table.c:280 task_work_run+0x146/0x1c0 kernel/task_work.c:164 exit_task_work include/linux/task_work.h:32 [inline] do_exit+0x705/0x24f0 kernel/exit.c:832 do_group_exit+0x168/0x2d0 kernel/exit.c:929 get_signal+0x1740/0x2120 kernel/signal.c:2852 arch_do_signal_or_restart+0x9c/0x730 arch/x86/kernel/signal.c:868 handle_signal_work kernel/entry/common.c:148 [inline] exit_to_user_mode_loop kernel/entry/common.c:172 [inline] exit_to_user_mode_prepare+0x191/0x220 kernel/entry/common.c:207 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline] syscall_exit_to_user_mode+0x2e/0x70 kernel/entry/common.c:300 do_syscall_64+0x53/0xd0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: NFC: nci: fix memory leak in nci_allocate_device nfcmrvl_disconnect fails to free the hci_dev field in struct nci_dev. Fix this by freeing hci_dev in nci_free_device. BUG: memory leak unreferenced object 0xffff888111ea6800 (size 1024): comm "kworker/1:0", pid 19, jiffies 4294942308 (age 13.580s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 60 fd 0c 81 88 ff ff .........`...... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000004bc25d43>] kmalloc include/linux/slab.h:552 [inline] [<000000004bc25d43>] kzalloc include/linux/slab.h:682 [inline] [<000000004bc25d43>] nci_hci_allocate+0x21/0xd0 net/nfc/nci/hci.c:784 [<00000000c59cff92>] nci_allocate_device net/nfc/nci/core.c:1170 [inline] [<00000000c59cff92>] nci_allocate_device+0x10b/0x160 net/nfc/nci/core.c:1132 [<00000000006e0a8e>] nfcmrvl_nci_register_dev+0x10a/0x1c0 drivers/nfc/nfcmrvl/main.c:153 [<000000004da1b57e>] nfcmrvl_probe+0x223/0x290 drivers/nfc/nfcmrvl/usb.c:345 [<00000000d506aed9>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<00000000bc632c92>] really_probe+0x159/0x4a0 drivers/base/dd.c:554 [<00000000f5009125>] driver_probe_device+0x84/0x100 drivers/base/dd.c:740 [<000000000ce658ca>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:846 [<000000007067d05f>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431 [<00000000f8e13372>] __device_attach+0x122/0x250 drivers/base/dd.c:914 [<000000009cf68860>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:491 [<00000000359c965a>] device_add+0x5be/0xc30 drivers/base/core.c:3109 [<00000000086e4bd3>] usb_set_configuration+0x9d9/0xb90 drivers/usb/core/message.c:2164 [<00000000ca036872>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238 [<00000000d40d36f6>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293 [<00000000bc632c92>] really_probe+0x159/0x4a0 drivers/base/dd.c:554

In the Linux kernel, the following vulnerability has been resolved: USB: usbfs: Don't WARN about excessively large memory allocations Syzbot found that the kernel generates a WARNing if the user tries to submit a bulk transfer through usbfs with a buffer that is way too large. This isn't a bug in the kernel; it's merely an invalid request from the user and the usbfs code does handle it correctly. In theory the same thing can happen with async transfers, or with the packet descriptor table for isochronous transfers. To prevent the MM subsystem from complaining about these bad allocation requests, add the __GFP_NOWARN flag to the kmalloc calls for these buffers.

In the Linux kernel, the following vulnerability has been resolved: i40e: Fix NULL pointer dereference in i40e_dbg_dump_desc When trying to dump VFs VSI RX/TX descriptors using debugfs there was a crash due to NULL pointer dereference in i40e_dbg_dump_desc. Added a check to i40e_dbg_dump_desc that checks if VSI type is correct for dumping RX/TX descriptors.

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix null pointer dereference on pointer cs_desc The pointer cs_desc return from snd_usb_find_clock_source could be null, so there is a potential null pointer dereference issue. Fix this by adding a null check before dereference.

In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix null ptr access msm_ioctl_gem_submit() Fix the below null pointer dereference in msm_ioctl_gem_submit(): 26545.260705: Call trace: 26545.263223: kref_put+0x1c/0x60 26545.266452: msm_ioctl_gem_submit+0x254/0x744 26545.270937: drm_ioctl_kernel+0xa8/0x124 26545.274976: drm_ioctl+0x21c/0x33c 26545.278478: drm_compat_ioctl+0xdc/0xf0 26545.282428: __arm64_compat_sys_ioctl+0xc8/0x100 26545.287169: el0_svc_common+0xf8/0x250 26545.291025: do_el0_svc_compat+0x28/0x54 26545.295066: el0_svc_compat+0x10/0x1c 26545.298838: el0_sync_compat_handler+0xa8/0xcc 26545.303403: el0_sync_compat+0x188/0x1c0 26545.307445: Code: d503201f d503201f 52800028 4b0803e8 (b8680008) 26545.318799: Kernel panic - not syncing: Oops: Fatal exception

In the Linux kernel, the following vulnerability has been resolved: net:sfc: fix non-freed irq in legacy irq mode SFC driver can be configured via modparam to work using MSI-X, MSI or legacy IRQ interrupts. In the last one, the interrupt was not properly released on module remove. It was not freed because the flag irqs_hooked was not set during initialization in the case of using legacy IRQ. Example of (trimmed) trace during module remove without this fix: remove_proc_entry: removing non-empty directory 'irq/125', leaking at least '0000:3b:00.1' WARNING: CPU: 39 PID: 3658 at fs/proc/generic.c:715 remove_proc_entry+0x15c/0x170 ...trimmed... Call Trace: unregister_irq_proc+0xe3/0x100 free_desc+0x29/0x70 irq_free_descs+0x47/0x70 mp_unmap_irq+0x58/0x60 acpi_unregister_gsi_ioapic+0x2a/0x40 acpi_pci_irq_disable+0x78/0xb0 pci_disable_device+0xd1/0x100 efx_pci_remove+0xa1/0x1e0 [sfc] pci_device_remove+0x38/0xa0 __device_release_driver+0x177/0x230 driver_detach+0xcb/0x110 bus_remove_driver+0x58/0xd0 pci_unregister_driver+0x2a/0xb0 efx_exit_module+0x24/0xf40 [sfc] __do_sys_delete_module.constprop.0+0x171/0x280 ? exit_to_user_mode_prepare+0x83/0x1d0 do_syscall_64+0x3d/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f9f9385800b ...trimmed...

In the Linux kernel, the following vulnerability has been resolved: s390/qeth: fix NULL deref in qeth_clear_working_pool_list() When qeth_set_online() calls qeth_clear_working_pool_list() to roll back after an error exit from qeth_hardsetup_card(), we are at risk of accessing card->qdio.in_q before it was allocated by qeth_alloc_qdio_queues() via qeth_mpc_initialize(). qeth_clear_working_pool_list() then dereferences NULL, and by writing to queue->bufs[i].pool_entry scribbles all over the CPU's lowcore. Resulting in a crash when those lowcore areas are used next (eg. on the next machine-check interrupt). Such a scenario would typically happen when the device is first set online and its queues aren't allocated yet. An early IO error or certain misconfigs (eg. mismatched transport mode, bad portno) then cause us to error out from qeth_hardsetup_card() with card->qdio.in_q still being NULL. Fix it by checking the pointer for NULL before accessing it. Note that we also have (rare) paths inside qeth_mpc_initialize() where a configuration change can cause us to free the existing queues, expecting that subsequent code will allocate them again. If we then error out before that re-allocation happens, the same bug occurs. Root-caused-by: Heiko Carstens <hca@linux.ibm.com>

In the Linux kernel, the following vulnerability has been resolved: ACPI: fix NULL pointer dereference Commit 71f642833284 ("ACPI: utils: Fix reference counting in for_each_acpi_dev_match()") started doing "acpi_dev_put()" on a pointer that was possibly NULL. That fails miserably, because that helper inline function is not set up to handle that case. Just make acpi_dev_put() silently accept a NULL pointer, rather than calling down to put_device() with an invalid offset off that NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: dwmac-rk: fix oob read in rk_gmac_setup KASAN reports an out-of-bounds read in rk_gmac_setup on the line: while (ops->regs[i]) { This happens for most platforms since the regs flexible array member is empty, so the memory after the ops structure is being read here. It seems that mostly this happens to contain zero anyway, so we get lucky and everything still works. To avoid adding redundant data to nearly all the ops structures, add a new flag to indicate whether the regs field is valid and avoid this loop when it is not.

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu: Fix arm_smmu_device refcount leak in address translation The reference counting issue happens in several exception handling paths of arm_smmu_iova_to_phys_hard(). When those error scenarios occur, the function forgets to decrease the refcount of "smmu" increased by arm_smmu_rpm_get(), causing a refcount leak. Fix this issue by jumping to "out" label when those error scenarios occur.

In the Linux kernel, the following vulnerability has been resolved: net: rds: fix memory leak in rds_recvmsg Syzbot reported memory leak in rds. The problem was in unputted refcount in case of error. int rds_recvmsg(struct socket *sock, struct msghdr *msg, size_t size, int msg_flags) { ... if (!rds_next_incoming(rs, &inc)) { ... } After this "if" inc refcount incremented and if (rds_cmsg_recv(inc, msg, rs)) { ret = -EFAULT; goto out; } ... out: return ret; } in case of rds_cmsg_recv() fail the refcount won't be decremented. And it's easy to see from ftrace log, that rds_inc_addref() don't have rds_inc_put() pair in rds_recvmsg() after rds_cmsg_recv() 1) | rds_recvmsg() { 1) 3.721 us | rds_inc_addref(); 1) 3.853 us | rds_message_inc_copy_to_user(); 1) + 10.395 us | rds_cmsg_recv(); 1) + 34.260 us | }

In the Linux kernel, the following vulnerability has been resolved: media: staging: media: zoran: calculate the right buffer number for zoran_reap_stat_com On the case tmp_dcim=1, the index of buffer is miscalculated. This generate a NULL pointer dereference later. So let's fix the calcul and add a check to prevent this to reappear.

In the Linux kernel, the following vulnerability has been resolved: net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings() In qlcnic_83xx_add_rings(), the indirect function of ahw->hw_ops->alloc_mbx_args will be called to allocate memory for cmd.req.arg, and there is a dereference of it in qlcnic_83xx_add_rings(), which could lead to a NULL pointer dereference on failure of the indirect function like qlcnic_83xx_alloc_mbx_args(). Fix this bug by adding a check of alloc_mbx_args(), this patch imitates the logic of mbx_cmd()'s failure handling. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_QLCNIC=m show no new warnings, and our static analyzer no longer warns about this code.

In the Linux kernel, the following vulnerability has been resolved: NFC: digital: fix possible memory leak in digital_in_send_sdd_req() 'skb' is allocated in digital_in_send_sdd_req(), but not free when digital_in_send_cmd() failed, which will cause memory leak. Fix it by freeing 'skb' if digital_in_send_cmd() return failed.

In the Linux kernel, the following vulnerability has been resolved: regulator: rt4801: Fix NULL pointer dereference if priv->enable_gpios is NULL devm_gpiod_get_array_optional may return NULL if no GPIO was assigned.

In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: Don't call free_pages_exact() with NULL address Unlike some other functions, we can't pass NULL pointer to free_pages_exact(). Add a proper NULL check for avoiding possible Oops.

In the Linux kernel, the following vulnerability has been resolved: interconnect: qcom: bcm-voter: add a missing of_node_put() Add a missing of_node_put() in of_bcm_voter_get() to avoid the reference leak.

In the Linux kernel, the following vulnerability has been resolved: mac80211: validate extended element ID is present Before attempting to parse an extended element, verify that the extended element ID is present.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid racing on fsync_entry_slab by multi filesystem instances As syzbot reported, there is an use-after-free issue during f2fs recovery: Use-after-free write at 0xffff88823bc16040 (in kfence-#10): kmem_cache_destroy+0x1f/0x120 mm/slab_common.c:486 f2fs_recover_fsync_data+0x75b0/0x8380 fs/f2fs/recovery.c:869 f2fs_fill_super+0x9393/0xa420 fs/f2fs/super.c:3945 mount_bdev+0x26c/0x3a0 fs/super.c:1367 legacy_get_tree+0xea/0x180 fs/fs_context.c:592 vfs_get_tree+0x86/0x270 fs/super.c:1497 do_new_mount fs/namespace.c:2905 [inline] path_mount+0x196f/0x2be0 fs/namespace.c:3235 do_mount fs/namespace.c:3248 [inline] __do_sys_mount fs/namespace.c:3456 [inline] __se_sys_mount+0x2f9/0x3b0 fs/namespace.c:3433 do_syscall_64+0x3f/0xb0 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae The root cause is multi f2fs filesystem instances can race on accessing global fsync_entry_slab pointer, result in use-after-free issue of slab cache, fixes to init/destroy this slab cache only once during module init/destroy procedure to avoid this issue.

In the Linux kernel, the following vulnerability has been resolved: fuse: use exclusive lock when FUSE_I_CACHE_IO_MODE is set This may be a typo. The comment has said shared locks are not allowed when this bit is set. If using shared lock, the wait in `fuse_file_cached_io_open` may be forever.

In the Linux kernel, the following vulnerability has been resolved: gpu: host1x: Fix a memory leak in 'host1x_remove()' Add a missing 'host1x_channel_list_free()' call in the remove function, as already done in the error handling path of the probe function.

In the Linux kernel, the following vulnerability has been resolved: usb: fix various gadgets null ptr deref on 10gbps cabling. This avoids a null pointer dereference in f_{ecm,eem,hid,loopback,printer,rndis,serial,sourcesink,subset,tcm} by simply reusing the 5gbps config for 10gbps.

In the Linux kernel, the following vulnerability has been resolved: ipmi: ssif: initialize ssif_info->client early During probe ssif_info->client is dereferenced in error path. However, it is set when some of the error checking has already been done. This causes following kernel crash if an error path is taken: [ 30.645593][ T674] ipmi_ssif 0-000e: ipmi_ssif: Not probing, Interface already present [ 30.657616][ T674] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000088 ... [ 30.657723][ T674] pc : __dev_printk+0x28/0xa0 [ 30.657732][ T674] lr : _dev_err+0x7c/0xa0 ... [ 30.657772][ T674] Call trace: [ 30.657775][ T674] __dev_printk+0x28/0xa0 [ 30.657778][ T674] _dev_err+0x7c/0xa0 [ 30.657781][ T674] ssif_probe+0x548/0x900 [ipmi_ssif 62ce4b08badc1458fd896206d9ef69a3c31f3d3e] [ 30.657791][ T674] i2c_device_probe+0x37c/0x3c0 ... Initialize ssif_info->client before any error path can be taken. Clear i2c_client data in the error path to prevent the dangling pointer from leaking.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Update intermediate power state for SI Update the current state as boot state during dpm initialization. During the subsequent initialization, set_power_state gets called to transition to the final power state. set_power_state refers to values from the current state and without current state populated, it could result in NULL pointer dereference. For ex: on platforms where PCI speed change is supported through ACPI ATCS method, the link speed of current state needs to be queried before deciding on changing to final power state's link speed. The logic to query ATCS-support was broken on certain platforms. The issue became visible when broken ATCS-support logic got fixed with commit f9b7f3703ff9 ("drm/amdgpu/acpi: make ATPX/ATCS structures global (v2)"). Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1698

In the Linux kernel, the following vulnerability has been resolved: sch_htb: fix refcount leak in htb_parent_to_leaf_offload The commit ae81feb7338c ("sch_htb: fix null pointer dereference on a null new_q") fixes a NULL pointer dereference bug, but it is not correct. Because htb_graft_helper properly handles the case when new_q is NULL, and after the previous patch by skipping this call which creates an inconsistency : dev_queue->qdisc will still point to the old qdisc, but cl->parent->leaf.q will point to the new one (which will be noop_qdisc, because new_q was NULL). The code is based on an assumption that these two pointers are the same, so it can lead to refcount leaks. The correct fix is to add a NULL pointer check to protect qdisc_refcount_inc inside htb_parent_to_leaf_offload.

In the Linux kernel, the following vulnerability has been resolved: nfp: Fix memory leak in nfp_cpp_area_cache_add() In line 800 (#1), nfp_cpp_area_alloc() allocates and initializes a CPP area structure. But in line 807 (#2), when the cache is allocated failed, this CPP area structure is not freed, which will result in memory leak. We can fix it by freeing the CPP area when the cache is allocated failed (#2). 792 int nfp_cpp_area_cache_add(struct nfp_cpp *cpp, size_t size) 793 { 794 struct nfp_cpp_area_cache *cache; 795 struct nfp_cpp_area *area; 800 area = nfp_cpp_area_alloc(cpp, NFP_CPP_ID(7, NFP_CPP_ACTION_RW, 0), 801 0, size); // #1: allocates and initializes 802 if (!area) 803 return -ENOMEM; 805 cache = kzalloc(sizeof(*cache), GFP_KERNEL); 806 if (!cache) 807 return -ENOMEM; // #2: missing free 817 return 0; 818 }

In the Linux kernel, the following vulnerability has been resolved: dm rq: don't queue request to blk-mq during DM suspend DM uses blk-mq's quiesce/unquiesce to stop/start device mapper queue. But blk-mq's unquiesce may come from outside events, such as elevator switch, updating nr_requests or others, and request may come during suspend, so simply ask for blk-mq to requeue it. Fixes one kernel panic issue when running updating nr_requests and dm-mpath suspend/resume stress test.

In the Linux kernel, the following vulnerability has been resolved: devlink: fix netns refcount leak in devlink_nl_cmd_reload() While preparing my patch series adding netns refcount tracking, I spotted bugs in devlink_nl_cmd_reload() Some error paths forgot to release a refcount on a netns. To fix this, we can reduce the scope of get_net()/put_net() section around the call to devlink_reload().

In the Linux kernel, the following vulnerability has been resolved: perf bpf: Avoid memory leak from perf_env__insert_btf() perf_env__insert_btf() doesn't insert if a duplicate BTF id is encountered and this causes a memory leak. Modify the function to return a success/error value and then free the memory if insertion didn't happen. v2. Adds a return -1 when the insertion error occurs in perf_env__fetch_btf. This doesn't affect anything as the result is never checked.

In the Linux kernel, the following vulnerability has been resolved: media: v4l2-core: explicitly clear ioctl input data As seen from a recent syzbot bug report, mistakes in the compat ioctl implementation can lead to uninitialized kernel stack data getting used as input for driver ioctl handlers. The reported bug is now fixed, but it's possible that other related bugs are still present or get added in the future. As the drivers need to check user input already, the possible impact is fairly low, but it might still cause an information leak. To be on the safe side, always clear the entire ioctl buffer before calling the conversion handler functions that are meant to initialize them.

In the Linux kernel, the following vulnerability has been resolved: neighbour: allow NUD_NOARP entries to be forced GCed IFF_POINTOPOINT interfaces use NUD_NOARP entries for IPv6. It's possible to fill up the neighbour table with enough entries that it will overflow for valid connections after that. This behaviour is more prevalent after commit 58956317c8de ("neighbor: Improve garbage collection") is applied, as it prevents removal from entries that are not NUD_FAILED, unless they are more than 5s old.

In the Linux kernel, the following vulnerability has been resolved: driver core: auxiliary bus: Fix memory leak when driver_register() fail If driver_register() returns with error we need to free the memory allocated for auxdrv->driver.name before returning from __auxiliary_driver_register()

In the Linux kernel, the following vulnerability has been resolved: bpf, s390: Fix potential memory leak about jit_data Make sure to free jit_data through kfree() in the error path.

In the Linux kernel, the following vulnerability has been resolved: NFS: fix an incorrect limit in filelayout_decode_layout() The "sizeof(struct nfs_fh)" is two bytes too large and could lead to memory corruption. It should be NFS_MAXFHSIZE because that's the size of the ->data[] buffer. I reversed the size of the arguments to put the variable on the left.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: CT, Fix multiple allocations and memleak of mod acts CT clear action offload adds additional mod hdr actions to the flow's original mod actions in order to clear the registers which hold ct_state. When such flow also includes encap action, a neigh update event can cause the driver to unoffload the flow and then reoffload it. Each time this happens, the ct clear handling adds that same set of mod hdr actions to reset ct_state until the max of mod hdr actions is reached. Also the driver never releases the allocated mod hdr actions and causing a memleak. Fix above two issues by moving CT clear mod acts allocation into the parsing actions phase and only use it when offloading the rule. The release of mod acts will be done in the normal flow_put(). backtrace: [<000000007316e2f3>] krealloc+0x83/0xd0 [<00000000ef157de1>] mlx5e_mod_hdr_alloc+0x147/0x300 [mlx5_core] [<00000000970ce4ae>] mlx5e_tc_match_to_reg_set_and_get_id+0xd7/0x240 [mlx5_core] [<0000000067c5fa17>] mlx5e_tc_match_to_reg_set+0xa/0x20 [mlx5_core] [<00000000d032eb98>] mlx5_tc_ct_entry_set_registers.isra.0+0x36/0xc0 [mlx5_core] [<00000000fd23b869>] mlx5_tc_ct_flow_offload+0x272/0x1f10 [mlx5_core] [<000000004fc24acc>] mlx5e_tc_offload_fdb_rules.part.0+0x150/0x620 [mlx5_core] [<00000000dc741c17>] mlx5e_tc_encap_flows_add+0x489/0x690 [mlx5_core] [<00000000e92e49d7>] mlx5e_rep_update_flows+0x6e4/0x9b0 [mlx5_core] [<00000000f60f5602>] mlx5e_rep_neigh_update+0x39a/0x5d0 [mlx5_core]

In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum: Protect driver from buggy firmware When processing port up/down events generated by the device's firmware, the driver protects itself from events reported for non-existent local ports, but not the CPU port (local port 0), which exists, but lacks a netdev. This can result in a NULL pointer dereference when calling netif_carrier_{on,off}(). Fix this by bailing early when processing an event reported for the CPU port. Problem was only observed when running on top of a buggy emulator.

In the Linux kernel, the following vulnerability has been resolved: scsi: core: Fix bad pointer dereference when ehandler kthread is invalid Commit 66a834d09293 ("scsi: core: Fix error handling of scsi_host_alloc()") changed the allocation logic to call put_device() to perform host cleanup with the assumption that IDA removal and stopping the kthread would properly be performed in scsi_host_dev_release(). However, in the unlikely case that the error handler thread fails to spawn, shost->ehandler is set to ERR_PTR(-ENOMEM). The error handler cleanup code in scsi_host_dev_release() will call kthread_stop() if shost->ehandler != NULL which will always be the case whether the kthread was successfully spawned or not. In the case that it failed to spawn this has the nasty side effect of trying to dereference an invalid pointer when kthread_stop() is called. The following splat provides an example of this behavior in the wild: scsi host11: error handler thread failed to spawn, error = -4 Kernel attempted to read user page (10c) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x0000010c Faulting instruction address: 0xc00000000818e9a8 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: ibmvscsi(+) scsi_transport_srp dm_multipath dm_mirror dm_region hash dm_log dm_mod fuse overlay squashfs loop CPU: 12 PID: 274 Comm: systemd-udevd Not tainted 5.13.0-rc7 #1 NIP: c00000000818e9a8 LR: c0000000089846e8 CTR: 0000000000007ee8 REGS: c000000037d12ea0 TRAP: 0300 Not tainted (5.13.0-rc7) MSR: 800000000280b033 &lt;SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE&gt; CR: 28228228 XER: 20040001 CFAR: c0000000089846e4 DAR: 000000000000010c DSISR: 40000000 IRQMASK: 0 GPR00: c0000000089846e8 c000000037d13140 c000000009cc1100 fffffffffffffffc GPR04: 0000000000000001 0000000000000000 0000000000000000 c000000037dc0000 GPR08: 0000000000000000 c000000037dc0000 0000000000000001 00000000fffff7ff GPR12: 0000000000008000 c00000000a049000 c000000037d13d00 000000011134d5a0 GPR16: 0000000000001740 c0080000190d0000 c0080000190d1740 c000000009129288 GPR20: c000000037d13bc0 0000000000000001 c000000037d13bc0 c0080000190b7898 GPR24: c0080000190b7708 0000000000000000 c000000033bb2c48 0000000000000000 GPR28: c000000046b28280 0000000000000000 000000000000010c fffffffffffffffc NIP [c00000000818e9a8] kthread_stop+0x38/0x230 LR [c0000000089846e8] scsi_host_dev_release+0x98/0x160 Call Trace: [c000000033bb2c48] 0xc000000033bb2c48 (unreliable) [c0000000089846e8] scsi_host_dev_release+0x98/0x160 [c00000000891e960] device_release+0x60/0x100 [c0000000087e55c4] kobject_release+0x84/0x210 [c00000000891ec78] put_device+0x28/0x40 [c000000008984ea4] scsi_host_alloc+0x314/0x430 [c0080000190b38bc] ibmvscsi_probe+0x54/0xad0 [ibmvscsi] [c000000008110104] vio_bus_probe+0xa4/0x4b0 [c00000000892a860] really_probe+0x140/0x680 [c00000000892aefc] driver_probe_device+0x15c/0x200 [c00000000892b63c] device_driver_attach+0xcc/0xe0 [c00000000892b740] __driver_attach+0xf0/0x200 [c000000008926f28] bus_for_each_dev+0xa8/0x130 [c000000008929ce4] driver_attach+0x34/0x50 [c000000008928fc0] bus_add_driver+0x1b0/0x300 [c00000000892c798] driver_register+0x98/0x1a0 [c00000000810eb60] __vio_register_driver+0x80/0xe0 [c0080000190b4a30] ibmvscsi_module_init+0x9c/0xdc [ibmvscsi] [c0000000080121d0] do_one_initcall+0x60/0x2d0 [c000000008261abc] do_init_module+0x7c/0x320 [c000000008265700] load_module+0x2350/0x25b0 [c000000008265cb4] __do_sys_finit_module+0xd4/0x160 [c000000008031110] system_call_exception+0x150/0x2d0 [c00000000800d35c] system_call_common+0xec/0x278 Fix this be nulling shost->ehandler when the kthread fails to spawn.

In the Linux kernel, the following vulnerability has been resolved: xdp, net: Fix use-after-free in bpf_xdp_link_release The problem occurs between dev_get_by_index() and dev_xdp_attach_link(). At this point, dev_xdp_uninstall() is called. Then xdp link will not be detached automatically when dev is released. But link->dev already points to dev, when xdp link is released, dev will still be accessed, but dev has been released. dev_get_by_index() | link->dev = dev | | rtnl_lock() | unregister_netdevice_many() | dev_xdp_uninstall() | rtnl_unlock() rtnl_lock(); | dev_xdp_attach_link() | rtnl_unlock(); | | netdev_run_todo() // dev released bpf_xdp_link_release() | /* access dev. | use-after-free */ | [ 45.966867] BUG: KASAN: use-after-free in bpf_xdp_link_release+0x3b8/0x3d0 [ 45.967619] Read of size 8 at addr ffff00000f9980c8 by task a.out/732 [ 45.968297] [ 45.968502] CPU: 1 PID: 732 Comm: a.out Not tainted 5.13.0+ #22 [ 45.969222] Hardware name: linux,dummy-virt (DT) [ 45.969795] Call trace: [ 45.970106] dump_backtrace+0x0/0x4c8 [ 45.970564] show_stack+0x30/0x40 [ 45.970981] dump_stack_lvl+0x120/0x18c [ 45.971470] print_address_description.constprop.0+0x74/0x30c [ 45.972182] kasan_report+0x1e8/0x200 [ 45.972659] __asan_report_load8_noabort+0x2c/0x50 [ 45.973273] bpf_xdp_link_release+0x3b8/0x3d0 [ 45.973834] bpf_link_free+0xd0/0x188 [ 45.974315] bpf_link_put+0x1d0/0x218 [ 45.974790] bpf_link_release+0x3c/0x58 [ 45.975291] __fput+0x20c/0x7e8 [ 45.975706] ____fput+0x24/0x30 [ 45.976117] task_work_run+0x104/0x258 [ 45.976609] do_notify_resume+0x894/0xaf8 [ 45.977121] work_pending+0xc/0x328 [ 45.977575] [ 45.977775] The buggy address belongs to the page: [ 45.978369] page:fffffc00003e6600 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4f998 [ 45.979522] flags: 0x7fffe0000000000(node=0|zone=0|lastcpupid=0x3ffff) [ 45.980349] raw: 07fffe0000000000 fffffc00003e6708 ffff0000dac3c010 0000000000000000 [ 45.981309] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 45.982259] page dumped because: kasan: bad access detected [ 45.982948] [ 45.983153] Memory state around the buggy address: [ 45.983753] ffff00000f997f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 45.984645] ffff00000f998000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.985533] >ffff00000f998080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.986419] ^ [ 45.987112] ffff00000f998100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.988006] ffff00000f998180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.988895] ================================================================== [ 45.989773] Disabling lock debugging due to kernel taint [ 45.990552] Kernel panic - not syncing: panic_on_warn set ... [ 45.991166] CPU: 1 PID: 732 Comm: a.out Tainted: G B 5.13.0+ #22 [ 45.991929] Hardware name: linux,dummy-virt (DT) [ 45.992448] Call trace: [ 45.992753] dump_backtrace+0x0/0x4c8 [ 45.993208] show_stack+0x30/0x40 [ 45.993627] dump_stack_lvl+0x120/0x18c [ 45.994113] dump_stack+0x1c/0x34 [ 45.994530] panic+0x3a4/0x7d8 [ 45.994930] end_report+0x194/0x198 [ 45.995380] kasan_report+0x134/0x200 [ 45.995850] __asan_report_load8_noabort+0x2c/0x50 [ 45.996453] bpf_xdp_link_release+0x3b8/0x3d0 [ 45.997007] bpf_link_free+0xd0/0x188 [ 45.997474] bpf_link_put+0x1d0/0x218 [ 45.997942] bpf_link_release+0x3c/0x58 [ 45.998429] __fput+0x20c/0x7e8 [ 45.998833] ____fput+0x24/0x30 [ 45.999247] task_work_run+0x104/0x258 [ 45.999731] do_notify_resume+0x894/0xaf8 [ 46.000236] work_pending ---truncated---

In the Linux kernel, the following vulnerability has been resolved: spi: fix use-after-free of the add_lock mutex Commit 6098475d4cb4 ("spi: Fix deadlock when adding SPI controllers on SPI buses") introduced a per-controller mutex. But mutex_unlock() of said lock is called after the controller is already freed: spi_unregister_controller(ctlr) -> put_device(&ctlr->dev) -> spi_controller_release(dev) -> mutex_unlock(&ctrl->add_lock) Move the put_device() after the mutex_unlock().

In the Linux kernel, the following vulnerability has been resolved: HID: bigbenff: prevent null pointer dereference When emulating the device through uhid, there is a chance we don't have output reports and so report_field is null.

In the Linux kernel, the following vulnerability has been resolved: staging: r8188eu: fix a memory leak in rtw_wx_read32() Free "ptmp" before returning -EINVAL.