Loading a DLL through an Uncontrolled Search Path Element in the Bosch Video Recording Manager installer up to and including version 3.82.0055 for 3.82, up to and including version 3.81.0064 for 3.81 and 3.71 and older potentially allows an attacker to execute arbitrary code on a victim's system. A prerequisite is that the victim is tricked into placing a malicious DLL in the same directory where the installer is started from.

GitHub: Git for Windows' uninstaller vulnerable to DLL hijacking when run under the SYSTEM user account.

Loading a DLL through an Uncontrolled Search Path Element in Bosch BVMS and BVMS Viewer in versions 10.1.0, 10.0.1, 10.0.0 and 9.0.0 and older potentially allows an attacker to execute arbitrary code on a victim's system. This affects both the installer as well as the installed application. This also affects Bosch DIVAR IP 7000 R2, Bosch DIVAR IP all-in-one 5000 and Bosch DIVAR IP all-in-one 7000 with installers and installed BVMS versions prior to BVMS 10.1.1.

A CWE-427: Uncontrolled Search Path Element vulnerability exists in ProSoft Configurator (v1.002 and prior), for the PMEPXM0100 (H) module, which could cause the execution of untrusted code when using double click to open a project file which may trigger execution of a malicious DLL.

A DLL Hijacking vulnerability in Eaton's 9000x Programming and Configuration Software v 2.0.38 and prior allows an attacker to execute arbitrary code by replacing the required DLLs with malicious DLLs when the software try to load vci11un6.DLL and cinpl.DLL.

An Uncontrolled Search Path Element (CWE-427) vulnerability in SmartControl version 4.3.15 and versions released before April 15, 2020 may allow an authenticated user to escalate privileges by placing a specially crafted DLL file in the search path. This issue was fixed in version 1.0.7, which was released after April 15, 2020. (Note, the version numbering system changed significantly between version 4.3.15 and version 1.0.7.)

Loading a DLL through an Uncontrolled Search Path Element in the Bosch Monitor Wall installer up to and including version 10.00.0164 potentially allows an attacker to execute arbitrary code on a victim's system. A prerequisite is that the victim is tricked into placing a malicious DLL in the same directory where the installer is started from.

Untrusted search path vulnerability in self-extracting files created by EpsonNet SetupManager versions 2.2.14 and earlier, and Offirio SynergyWare PrintDirector versions 1.6x/1.6y and earlier allows an attacker to gain privileges via a Trojan horse DLL in an unspecified directory.

SAP Business Client, version 7.0, allows an attacker after a successful social engineering attack to inject malicious code as a DLL file in untrusted directories that can be executed by the application, due to uncontrolled search path element. An attacker could thereby control the behavior of the application.

NVIDIA GeForce NOW application software on Windows, all versions prior to 2.0.25.119, contains a vulnerability in its open-source software dependency in which the OpenSSL library is vulnerable to binary planting attacks by a local user, which may lead to code execution or escalation of privileges.

Substance3D - Modeler versions 1.22.0 and earlier are affected by an Uncontrolled Search Path Element vulnerability that could result in arbitrary code execution in the context of the current user. If the application uses an uncontrolled search path to locate critical resources such as programs, an attacker could modify that search path to point to a malicious program, which the targeted application would then execute. Exploitation of this issue does not require user interaction.

An Uncontrolled Search Path Element in Foxit Software released Foxit Reader v11.2.118.51569 allows attackers to escalate privileges when searching for DLL libraries without specifying an absolute path.

ClipShare is a lightweight and cross-platform tool for clipboard sharing. Prior to 3.8.5, ClipShare Server for Windows uses the default Windows DLL search order and loads system libraries like CRYPTBASE.dll and WindowsCodecs.dll from its own directory before the system path. A local, non-privileged user who can write to the folder containing clip_share.exe can place malicious DLLs there, leading to arbitrary code execution in the context of the server, and, if launched by an Administrator (or another elevated user), it results in a reliable local privilege escalation. This vulnerability is fixed in 3.8.5.

Notepad++ is a free and open-source source code editor. In versions 8.8.1 and prior, a privilege escalation vulnerability exists in the Notepad++ v8.8.1 installer that allows unprivileged users to gain SYSTEM-level privileges through insecure executable search paths. An attacker could use social engineering or clickjacking to trick users into downloading both the legitimate installer and a malicious executable to the same directory (typically Downloads folder - which is known as Vulnerable directory). Upon running the installer, the attack executes automatically with SYSTEM privileges. This issue has been fixed and will be released in version 8.8.2.

In CODESYS Development System versions from 3.5.17.0 and prior to 3.5.19.20 a vulnerability allows for execution of binaries from the current working directory in the users context .

Acronis True Image for Windows prior to 2021 Update 3 allowed local privilege escalation due to a DLL hijacking vulnerability in multiple components, aka an Untrusted Search Path issue.

Western Digital Dashboard before 3.2.2.9 allows DLL Hijacking that leads to compromise of the SYSTEM account.

AnyDesk before 6.1.0 on Windows, when run in portable mode on a system where the attacker has write access to the application directory, allows this attacker to compromise a local user account via a read-only setting for a Trojan horse gcapi.dll file.

DPMAdirektPro 4.1.5 is vulnerable to DLL Hijacking. It happens by placing a malicious DLL in a directory (in the absence of a legitimate DLL), which is then loaded by the application instead of the legitimate DLL. This causes the malicious DLL to load with the same privileges as the application, thus causing a privilege escalation.

A vulnerability, which was classified as critical, has been found in Discord 1.0.9188 on Windows. Affected by this issue is some unknown functionality in the library WINSTA.dll. The manipulation leads to uncontrolled search path. The attack needs to be approached locally. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

ownCloud owncloud/client before 2.7 allows DLL Injection. The desktop client loaded development plugins from certain directories when they were present.

Substance3D - Modeler versions 1.21.0 and earlier are affected by an Uncontrolled Search Path Element vulnerability that could result in arbitrary code execution in the context of the current user. If the application relies on a search path to locate critical resources such as libraries or executables, an attacker could manipulate the search path to load a malicious resource, potentially executing arbitrary code. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

An issue in RAONWIZ K Editor v2018.0.0.10 allows attackers to perform a DLL hijacking attack when the service or system is restarted.

The installer of Kaspersky Anti-Ransomware Tool (KART) prior to KART 4.0 Patch C was vulnerable to a DLL hijacking attack that allowed an attacker to elevate privileges during installation process.

An issue was discovered in Foxit Reader and PhantomPDF before 10.1. It allows attackers to execute arbitrary code via a Trojan horse taskkill.exe in the current working directory.

conda-forge openssl-feedstock before 066e83c (2024-05-20), on Microsoft Windows, configures OpenSSL to use an OPENSSLDIR file path that can be written to by non-privilged local users. By writing a specially crafted openssl.cnf file in OPENSSLDIR, a non-privileged local user can execute arbitrary code with the privileges of the user or process loading openssl-feedstock DLLs. Miniforge before 24.5.0 is also affected.

Multiple files and folders in Utimaco SecurityServer 4.20.0.4 and 4.31.1.0. are installed with Read/Write permissions for authenticated users, which allows for binaries to be manipulated by non-administrator users. Additionally, entries are made to the PATH environment variable which, in conjunction with these weak permissions, could enable an attacker to perform a DLL hijacking attack.

Installers of Kaspersky Security Center and Kaspersky Security Center Web Console prior to 12 & prior to 12 Patch A were vulnerable to a DLL hijacking attack that allowed an attacker to elevate privileges in the system.

A DLL hijacking vulnerability in the B. Braun OnlineSuite Version AP 3.0 and earlier allows local attackers to execute code on the system as a high privileged user.

BleachBit cleans files to free disk space and to maintain privacy. BleachBit for Windows up to version 4.6.2 is vulnerable to a DLL Hijacking vulnerability. By placing a malicious DLL with the name uuid.dll in the folder C:\Users\<username>\AppData\Local\Microsoft\WindowsApps\, an attacker can execute arbitrary code every time BleachBit is run. This issue has been patched in version 4.9.0.

The affected setup component is vulnerable to DLL hijacking. This could allow an attacker to execute arbitrary code when a legitimate user installs an application that uses the affected setup component.

Jupyter Core is a package for the core common functionality of Jupyter projects. When using Jupyter Core prior to version 5.8.0 on Windows, the shared `%PROGRAMDATA%` directory is searched for configuration files (`SYSTEM_CONFIG_PATH` and `SYSTEM_JUPYTER_PATH`), which may allow users to create configuration files affecting other users. Only shared Windows systems with multiple users and unprotected `%PROGRAMDATA%` are affected. Users should upgrade to Jupyter Core version 5.8.0 or later to receive a patch. Some other mitigations are available. As administrator, modify the permissions on the `%PROGRAMDATA%` directory so it is not writable by unauthorized users; or as administrator, create the `%PROGRAMDATA%\jupyter` directory with appropriately restrictive permissions; or as user or administrator, set the `%PROGRAMDATA%` environment variable to a directory with appropriately restrictive permissions (e.g. controlled by administrators _or_ the current user).

Trend Micro Anti-Threat Toolkit (ATTK) versions 1.62.0.1218 and below have a vulnerability that may allow an attacker to place malicious files in the same directory, potentially leading to arbitrary remote code execution (RCE) when executed.

Go through 1.12 on Windows misuses certain LoadLibrary functionality, leading to DLL injection.

Improper access control in Visual Studio allows an authorized attacker to elevate privileges locally.

Adobe application manager installer version 10.0 have an Insecure Library Loading (DLL hijacking) vulnerability. Successful exploitation could lead to Arbitrary Code Execution in the context of the current user.

Adobe Illustrator CC versions 23.1 and earlier have an insecure library loading (dll hijacking) vulnerability. Successful exploitation could lead to privilege escalation.

Adobe After Effects versions 16 and earlier have an insecure library loading (dll hijacking) vulnerability. Successful exploitation could lead to arbitrary code execution.

Uncontrolled search path element in Visual Studio Tools for Applications and SQL Server Management Studio allows an authorized attacker to elevate privileges locally.

A malicious DLL preload vulnerability in Fortinet FortiClient for Windows 6.2.0 and below allows a privileged attacker to perform arbitrary code execution via forging that DLL.

A CWE-427: Uncontrolled Search Path Element vulnerability exists in ProClima (all versions prior to version 8.0.0) which could allow a malicious DLL file, with the same name of any resident DLLs inside the software installation, to execute arbitrary code in all versions of ProClima prior to version 8.0.0.

A CWE-427:Uncontrolled Search Path Element vulnerability exists in MSX Configurator (Software Version prior to V1.0.8.1), which could cause privilege escalation when injecting a malicious DLL.

Adobe Animate CC versions 19.2.1 and earlier have an insecure library loading (dll hijacking) vulnerability. Successful exploitation could lead to privilege escalation.

DLL preloading vulnerability in Autodesk Desktop Application versions 7.0.16.29 and earlier. An attacker may trick a user into downloading a malicious DLL file into the working directory, which may then leverage a DLL preloading vulnerability and execute code on the system.

The Rapid7 InsightAppSec broker suffers from a DLL injection vulnerability in the 'prunsrv.exe' component of the product. If exploited, a local user of the system (who must already be authenticated to the operating system) can elevate their privileges with this vulnerability to the privilege level of InsightAppSec (usually, SYSTEM). This issue affects version 2019.06.24 and prior versions of the product.

The uncontrolled search path element vulnerability in Gemalto Sentinel UltraPro Client Library ux32w.dll Versions 1.3.0, 1.3.1, and 1.3.2 enables an attacker to load and execute a malicious file.

A non-privileged user or program can put code and a config file in a known non-privileged path (under C:/usr/local/) that will make curl <= 7.65.1 automatically run the code (as an openssl "engine") on invocation. If that curl is invoked by a privileged user it can do anything it wants.

VMware Workstation (15.x prior to 15.5.1) and Horizon View Agent (7.10.x prior to 7.10.1 and 7.5.x prior to 7.5.4) contain a DLL hijacking vulnerability due to insecure loading of a DLL by Cortado Thinprint. Successful exploitation of this issue may allow attackers with normal user privileges to escalate their privileges to administrator on a Windows machine where Workstation or View Agent is installed.