Improper Restriction of Excessive Authentication Attempts vulnerability in upKeeper Solutions product upKeeper Manager allows Authentication Abuse.This issue affects upKeeper Manager: through 5.1.9.

Improper Restriction of Excessive Authentication Attempts vulnerability in upKeeper Solutions product upKeeper Manager allows Authentication Abuse.This issue affects upKeeper Manager: through 5.1.9.

A vulnerability in Kaiten version 57.131.12 and earlier allows attackers to bypass the PIN code authentication mechanism. The application requires users to input a 6-digit PIN code sent to their email for authorization after entering their login credentials. However, the request limiting mechanism can be easily bypassed, enabling attackers to perform a brute force attack to guess the correct PIN and gain unauthorized access to the application.

Ricoh SP C250DN 1.05 devices have an Authentication Method Vulnerable to Brute Force Attacks. Some Ricoh printers did not implement account lockout. Therefore, it was possible to obtain the local account credentials by brute force.

The authentication implementation on the xArm controller has very low entropy, making it vulnerable to a brute-force attack. There is no mechanism in place to mitigate or lockout automated attempts to gain access.

A vulnerability has been identified in SINEMA Remote Connect Server (All versions < V2.0 SP1). The web interface has no means to prevent password guessing attacks. The vulnerability could be exploited by an attacker with network access to the vulnerable software, requiring no privileges and no user interaction. The vulnerability could allow full access to the web interface. At the time of advisory publication no public exploitation of this security vulnerability was known.

Umanni RH 1.0 does not limit the number of authentication attempts. An unauthenticated user may exploit this vulnerability to launch a brute-force authentication attack against the Login page.

AutoPi Wi-Fi/NB and 4G/LTE devices before 2019-10-15 allows an attacker to perform a brute-force attack or dictionary attack to gain access to the WiFi network, which provides root access to the device. The default WiFi password and WiFi SSID are derived from the same hash function output (input is only 8 characters), which allows an attacker to deduce the WiFi password from the WiFi SSID.

A vulnerability has been identified in Mendix Forgot Password Appstore module (All versions >= V3.3.0 < V3.5.1), Mendix Forgot Password Appstore module (Mendix 7 compatible) (All versions < V3.2.2). Initial passwords are generated in an insecure manner. This could allow an unauthenticated remote attacker to efficiently brute force passwords in specific situations.

A security feature bypass vulnerability exists in Active Directory Federation Services (ADFS) which could allow an attacker to bypass the extranet lockout policy.To exploit this vulnerability, an attacker could run a specially crafted application, which would allow an attacker to launch a password brute-force attack or cause account lockouts in Active Directory.This security update corrects how ADFS handles external authentication requests., aka 'ADFS Security Feature Bypass Vulnerability'. This CVE ID is unique from CVE-2019-0975.

GL-iNet products AR750/AR750S/AR300M/AR300M16/MT300N-V2/B1300/MT1300/SFT1200/X750 v4.3.11, MT3000/MT2500/AXT1800/AX1800/A1300/X300B v4.5.16, XE300 v4.3.16, E750 v4.3.12, AP1300/S1300 v4.3.13, and XE3000/X3000 v4.4 were discovered to contain a remote code execution (RCE) vulnerability.

Sielco PolyEco1000 uses a weak set of default administrative credentials that can be easily guessed in remote password attacks and gain full control of the system.

The Theme My Login 2FA WordPress plugin before 1.2 does not rate limit 2FA validation attempts, which may allow an attacker to brute-force all possibilities, which shouldn't be too long, as the 2FA codes are 6 digits.

Shenzhen Tenda W30E V2 firmware versions up to and including V16.01.0.19(5037) do not enforce rate limiting or account lockout mechanisms on authentication endpoints. This allows attackers to perform unrestricted brute-force attempts against administrative credentials.

Dell PowerScale OneFS versions prior to 9.13.0.0 contains an improper restriction of excessive authentication attempts vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Unauthorized access.

VAXstations running Open VMS 5.3 through 5.5-2 with VMS DECwindows or MOTIF do not properly disable access to user accounts that exceed the break-in limit threshold for failed login attempts, which makes it easier for attackers to conduct brute force password guessing.

Dell RecoverPoint for Virtual Machines 6.0.x contains a vulnerability. An improper Restriction of Excessive Authentication vulnerability where a Network attacker could potentially exploit this vulnerability, leading to a brute force attack or a dictionary attack against the RecoverPoint login form and a complete system compromise. This allows attackers to brute-force the password of valid users in an automated manner.

Due to insufficient server-side login attempt limit enforcement, a vulnerability in the SSH login service of Juniper Networks Juniper Advanced Threat Prevention (JATP) Series and Virtual JATP (vJATP) devices allows an unauthenticated, remote attacker to perform multiple login attempts in excess of the configured login attempt limit. Successful exploitation will allow the attacker to perform brute-force password attacks on the SSH service. This issue affects: Juniper Networks JATP and vJATP versions prior to 5.0.6.0.

In ExtremeGuest Essentials before 25.5.0, captive-portal may permit unauthorized access via manual brute-force procedure. Under certain ExtremeGuest Essentials captive-portal SSID configurations, repeated manual login attempts may allow an unauthenticated device to be marked as authenticated and obtain network access. Client360 logs may display the client MAC as the username despite no MAC-authentication being enabled.

Improper Restriction of Excessive Authentication Attempts vulnerability in Drupal Mail Login allows Brute Force.This issue affects Mail Login: from 3.0.0 before 3.2.0, from 4.0.0 before 4.2.0.

Pimcore before 6.2.2 lacks brute force protection for the 2FA token.

EPSON WebConfig and Epson Web Control for SEIKO EPSON Projector Products do not restrict excessive authentication attempts. An administrative user's password may be identified through a brute force attack.

This vulnerability exists in Shilpi Client Dashboard due to missing restrictions for incorrect login attempts on its API based login. A remote attacker could exploit this vulnerability by conducting a brute force attack on password, which could lead to gain unauthorized access to other user accounts.

An issue was discovered in weijiang1994 university-bbs (aka Blogin) in commit 9e06bab430bfc729f27b4284ba7570db3b11ce84 (2025-01-13). A weak verification code generation mechanism combined with missing rate limiting allows attackers to perform brute-force attacks on verification codes without authentication. Successful exploitation may result in account takeover via password reset or other authentication bypass methods.

Zitadel is open-source identity infrastructure software. Prior to 4.6.0, 3.4.3, and 2.71.18, an attacker can perform an online brute-force attack on OTP, TOTP, and passwords. While Zitadel allows preventing online brute force attacks in scenarios like TOTP, Email OTP, or passwords using a lockout mechanism. The mechanism is not enabled by default and can cause a denial of service for the corresponding user if enabled. Additionally, the mitigation strategies were not fully implemented in the more recent resource-based APIs. This vulnerability is fixed in 4.6.0, 3.4.3, and 2.71.18.

IBM Robotic Process Automation with Automation Anywhere 11 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 161411.

index.php?r=site%2Flogin in EduSec through 4.2.6 does not restrict sending a series of LoginForm[username] and LoginForm[password] parameters, which might make it easier for remote attackers to obtain access via a brute-force approach.

IBM Intelligent Operations Center (IOC) 5.1.0 through 5.2.0 is vulnerable to user enumeration, allowing an attacker to brute force into the system. IBM X-Force ID: 157013.

An issue was discovered in /cgi-bin/luci on Teltonika RTU9XX (e.g., RUT950) R_31.04.89 before R_00.05.00.5 devices. The authentication functionality is not protected from automated tools used to make login attempts to the application. An anonymous attacker has the ability to make unlimited login attempts with an automated tool. This ability could lead to cracking a targeted user's password.

IBM Security Guardium Big Data Intelligence 4.0 (SonarG) uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 161036.

The Telnet service for Polycom ViewStation before 7.2.4 does not restrict the number of failed login attempts, which makes it easier for remote attackers to guess usernames and passwords via a brute force attack.

The application does not implement sufficient measures to prevent multiple failed authentication attempts within a short time frame, making it possible for an attacker to guess user credentials.

Plataformatec Devise version 4.5.0 and earlier, using the lockable module contains a CWE-367 vulnerability in The `Devise::Models::Lockable` class, more specifically at the `#increment_failed_attempts` method. File location: lib/devise/models/lockable.rb that can result in Multiple concurrent requests can prevent an attacker from being blocked on brute force attacks. This attack appear to be exploitable via Network connectivity - brute force attacks. This vulnerability appears to have been fixed in 4.6.0 and later.

An issue in the BYD Dilink Headunit System v3.0 to v4.0 allows attackers to bypass authentication via a bruteforce attack.

A lack of rate limiting in the login mechanism of SigningHub v8.6.8 allows attackers to bypass authentication via a brute force attack.

Nextcloud Server provides data storage for Nextcloud, an open source cloud platform. In Nextcloud Server prior to versions 26.0.9 and 27.1.4; as well as Nextcloud Enterprise Server prior to versions 23.0.12.13, 24.0.12.9, 25.0.13.4, 26.0.9, and 27.1.4; when a (reverse) proxy is configured as trusted proxy the server could be tricked into reading a wrong remote address for an attacker, allowing them executing authentication attempts than intended. Nextcloud Server versions 26.0.9 and 27.1.4 and Nextcloud Enterprise Server versions 23.0.12.13, 24.0.12.9, 25.0.13.4, 26.0.9, and 27.1.4 contain a patch for this issue. No known workarounds are available.

Improper Restriction of Excessive Authentication Attempts in GitHub repository wger-project/wger prior to 2.2.

DoraCMS v2.1.8 was discovered to re-use the same code for verification of valid usernames and passwords. This vulnerability allows attackers to gain access to the application via a bruteforce attack.

A vulnerability in the Gleez CMS 1.2.0 login page could allow an unauthenticated, remote attacker to perform multiple user enumerations, which can further help an attacker to perform login attempts in excess of the configured login attempt limit. The vulnerability is due to insufficient server-side access control and login attempt limit enforcement. An attacker could exploit this vulnerability by sending modified login attempts to the Portal login page. An exploit could allow the attacker to identify existing users and perform brute-force password attacks on the Portal, as demonstrated by navigating to the user/4 URI.

kodbox 1.46.01 has a security flaw that enables user enumeration. This problem is present on the login page, where an attacker can identify valid users based on varying response messages, potentially paving the way for a brute force attack.

HCL AppScan Standard is vulnerable to excessive authorization attempts

Pivotal Cloud Foundry On Demand Services SDK, versions prior to 0.24 contain an insecure method of verifying credentials. A remote unauthenticated malicious user may make many requests to the service broker with different credentials, allowing them to infer valid credentials and gain access to perform broker operations.

A flaw was found in Red Hat Process Automation Manager 7 where an attacker can benefit from a brute force attack against Administration Console as the application does not limit the number of unsuccessful login attempts.

Improper Restriction of Excessive Authentication Attempts in GitHub repository janeczku/calibre-web prior to 0.6.20.

xrdp is an open source RDP server. xrdp versions prior to 0.10.0 have a vulnerability that allows attackers to make an infinite number of login attempts. The number of max login attempts is supposed to be limited by a configuration parameter `MaxLoginRetry` in `/etc/xrdp/sesman.ini`. However, this mechanism was not effectively working. As a result, xrdp allows an infinite number of login attempts.

A vulnerability has been identified in Desigo DXR2 (All versions < V01.21.142.5-22), Desigo PXC3 (All versions < V01.21.142.4-18), Desigo PXC4 (All versions < V02.20.142.10-10884), Desigo PXC5 (All versions < V02.20.142.10-10884). The login functionality of the application does not employ any countermeasures against Password Spraying attacks or Credential Stuffing attacks. An attacker could obtain a list of valid usernames on the device by exploiting the issue and then perform a precise Password Spraying or Credential Stuffing attack in order to obtain access to at least one account.

Improper Restriction of Excessive Authentication Attempts in GitHub repository heroiclabs/nakama prior to 3.13.0. This results in login brute-force attacks.

In some cases, an unsuccessful attempt to log into IBM Spectrum Protect Operations Center 8.1.0.000 through 8.1.14.000 does not cause the administrator's invalid sign-on count to be incremented on the IBM Spectrum Protect Server. An attacker could exploit this vulnerability using brute force techniques to gain unauthorized administrative access to the IBM Spectrum Protect Server. IBM X-Force ID: 226325.

A CWE-307: Improper Restriction of Excessive Authentication Attempts vulnerability exists that could allow an attacker to manipulate the admin after numerous attempts at guessing credentials. Affected Product: spaceLYnk (V2.6.2 and prior), Wiser for KNX (formerly homeLYnk) (V2.6.2 and prior), fellerLYnk (V2.6.2 and prior)

Dell PowerScale OneFS, versions 8.2.x-9.3.0.x, contain an improper restriction of excessive authentication attempts. An unauthenticated remote attacker could potentially exploit this vulnerability, leading to compromised accounts.